def temperature(request):
request_result = __checkUser(request)
if request_result == HTTP_RESULT_SUCCESS:
temperature_config = config.get_temperature_config()
if request.method == 'POST':
if config.KEY_IS_AUTO_CONTROL in request.POST:
temperature_config.isAutoControl = request.POST.get(config.KEY_IS_AUTO_CONTROL, config.STATE_OFF)
print('自动温度控制被设置为 ' + temperature_config.isAutoControl)
if config.KEY_UPPER_LIMIT in request.POST:
temperature_config.upperLimit = request.POST.get(config.KEY_UPPER_LIMIT, 30)
print('自动温度控制温度上限被设置为 ' + temperature_config.upperLimit)
if config.KEY_LOWER_LIMIT in request.POST:
temperature_config.lowerLimit = request.POST.get(config.KEY_LOWER_LIMIT, 0)
print('自动温度控制温度下限被设置为 ' + temperature_config.lowerLimit)
if config.KEY_UPPER_ACTION in request.POST:
temperature_config.upperActions = request.POST.get(config.KEY_UPPER_ACTION, config.EMPTY_ACTION)
print('自动温度控制温度上限执行动作被设置为 ' + temperature_config.upperActions)
if config.KEY_LOWER_ACTION in request.POST:
temperature_config.lowerActions = request.POST.get(config.KEY_LOWER_ACTION, config.EMPTY_ACTION)
print('自动温度控制温度下限执行动作被设置为 ' + temperature_config.lowerActions)
config.set_temperature_config_obj(temperature_config)
json_obj = {
KEY_RESULT: HTTP_RESULT_SUCCESS,
KEY_TYPE: TYPE_TEMPERATURE,
config.KEY_IS_AUTO_CONTROL: temperature_config.isAutoControl,
config.KEY_UPPER_LIMIT: temperature_config.upperLimit,
config.KEY_LOWER_LIMIT: temperature_config.lowerLimit,
config.KEY_UPPER_ACTION: temperature_config.upperActions,
config.KEY_LOWER_ACTION: temperature_config.lowerActions,
}
return HttpResponse(json.dumps(json_obj))
else:
return HttpResponse(DICT_RESULT_CODE.get(request_result, JSON_UNKNOWN_ERROR))
def actionLimit(self, actions):
# print(actions)
print('执行任务')
print(actions)
for tempAction in json.loads(actions):
print('循环')
tempTarget = tempAction['target']
tempOperation = tempAction['operation']
if tempTarget == 0: # 温度自动控制
tempperatureConfig = config.get_temperature_config()
tempperatureConfig.isAutoControl = int(tempOperation)
config.set_temperature_config_obj(tempperatureConfig)
elif tempTarget == 1: # 空气适度自动控制
humidityConfig = config.get_humidity_config()
humidityConfig.isAutoControl = int(tempOperation)
config.set_dumidity_config_obj(humidityConfig)
pass
elif tempTarget == 2: # 土壤适度自动控制
dirtHumidity = config.get_dirt_humidity_config()
dirtHumidity.isAutoControl = int(tempOperation)
config.set_dirt_humidity_config_obj(dirtHumidity)
pass
elif tempTarget == 3: # 自动施肥
fertilizationConfig = config.get_fertilization_config()
config.set_fertilization_config(tempOperation, fertilizationConfig.repeatType, fertilizationConfig.repeatCircle,
fertilizationConfig.hour, fertilizationConfig.minute)
elif tempTarget == 4: # 自动浇水
waterConfig = config.get_water_config()
config.set_water_config(tempOperation, waterConfig.repeatType, waterConfig.repeatCircle,
waterConfig.hour, waterConfig.minute)
elif tempTarget == 5: # 施肥
sendCmd('06',self.intToHex(tempOperation))
elif tempTarget == 6: # 浇水
sendCmd('07',self.intToHex(tempOperation))
elif tempTarget == 7: # 风扇
sendCmd('04',self.intToHex(tempOperation))
elif tempTarget == 8: # 电热膜
sendCmd('05',self.intToHex(tempOperation))
elif tempTarget == 9: # 自定义设备１
sendCmd('00',self.intToHex(tempOperation))
elif tempTarget == 10: # 自定义设备2
sendCmd('01',self.intToHex(tempOperation))
elif tempTarget == 11: # 自定义设备3
sendCmd('02',self.intToHex(tempOperation))
elif tempTarget == 12: # 自定义设备4
sendCmd('03',self.intToHex(tempOperation))
elif tempTarget == 13: # 环境光控制
sendCmd('08',self.intToHex(tempOperation))
elif tempTarget == 14: # 环境光颜色
sendCmd('09',self.intToHex(tempOperation))
elif tempTarget == 15: # 环境光亮度
sendCmd('0a',self.intToHex(tempOperation))
print(self.intToHex(tempTarget),' -- ',self.intToHex(tempOperation))
# sendCmd(self.intToHex(tempTarget), self.intToHex(tempOperation))
# sendCmd('00','01')
# time.sleep(0.05)
# if tempTarget
# print('target => ' + str(tempAction['target']) + ' operation => ' + str(tempAction['operation']))
time.sleep(0.05)
sendCmdReset()
def operation(schedule):
tempTarget = int(schedule['target'])
tempOperation = int(schedule['value'])
print('命令', tempTarget, '值', tempOperation)
if tempTarget == 0: # 温度自动控制
tempperatureConfig = config.get_temperature_config()
tempperatureConfig.isAutoControl = int(tempOperation)
config.set_temperature_config_obj(tempperatureConfig)
elif tempTarget == 1: # 空气适度自动控制
humidityConfig = config.get_humidity_config()
humidityConfig.isAutoControl = int(tempOperation)
config.set_dumidity_config_obj(humidityConfig)
elif tempTarget == 2: # 土壤适度自动控制
dirtHumidity = config.get_dirt_humidity_config()
dirtHumidity.isAutoControl = int(tempOperation)
config.set_dirt_humidity_config_obj(dirtHumidity)
elif tempTarget == 3: # 自动施肥
fertilizationConfig = config.get_fertilization_config()
config.set_fertilization_config(tempOperation,
fertilizationConfig.repeatType,
fertilizationConfig.repeatCircle,
fertilizationConfig.hour,
fertilizationConfig.minute)
elif tempTarget == 4: # 自动浇水
waterConfig = config.get_water_config()
config.set_water_config(tempOperation, waterConfig.repeatType,
waterConfig.repeatCircle, waterConfig.hour,
waterConfig.minute)
elif tempTarget == 5: # 施肥
conn.sendCmd('06', intToHex(tempOperation))
elif tempTarget == 6: # 浇水
conn.sendCmd('07', intToHex(tempOperation))
elif tempTarget == 7: # 风扇
conn.sendCmd('04', intToHex(tempOperation))
elif tempTarget == 8: # 电热膜
conn.sendCmd('05', intToHex(tempOperation))
elif tempTarget == 9: # 自定义设备１
conn.sendCmd('00', intToHex(tempOperation))
elif tempTarget == 10: # 自定义设备2
conn.sendCmd('01', intToHex(tempOperation))
elif tempTarget == 11: # 自定义设备3
conn.sendCmd('02', intToHex(tempOperation))
elif tempTarget == 12: # 自定义设备4
conn.sendCmd('03', intToHex(tempOperation))
elif tempTarget == 13: # 环境光控制
conn.sendCmd('08', intToHex(tempOperation))
elif tempTarget == 14: # 环境光颜色
conn.sendCmd('09', intToHex(tempOperation))
elif tempTarget == 15: # 环境光亮度
conn.sendCmd('0a', intToHex(tempOperation))
print('真的执行定时操作 ')
def mobile_setting(request):
getUserList = authorization.get_user(request)
if getUserList[0] == authorization.RESULT_SUCCESS:
if (getUserList[2].is_staff and getUserList[2].is_active) or getUserList[2].is_superuser:
temperature_config = config.get_temperature_config()
humidity_config = config.get_humidity_config()
dirt_humidity_config = config.get_dirt_humidity_config()
fertilization_config = config.get_fertilization_config()
watering_config = config.get_water_config()
return HttpResponse(json.dumps({
'temperature_state': temperature_config.isAutoControl,
'temperature_upper_limit': temperature_config.upperLimit,
'temperature_lower_limit': temperature_config.lowerLimit,
'temperature_upper_actions': temperature_config.upperActions,
'temperature_lower_actions': temperature_config.lowerActions,
'himidity_state': humidity_config.isAutoControl,
'himidity_upper_limit': humidity_config.upperLimit,
'himidity_lower_limit': humidity_config.lowerLimit,
'himidity_upper_actions': humidity_config.upperActions,
'himidity_lower_actions': humidity_config.lowerActions,
'dirt_himidity_state': dirt_humidity_config.isAutoControl,
'dirt_himidity_upper_limit': dirt_humidity_config.upperLimit,
'dirt_himidity_lower_limit': dirt_humidity_config.lowerLimit,
'dirt_himidity_upper_actions': dirt_humidity_config.upperActions,
'dirt_himidity_lower_actions': dirt_humidity_config.lowerActions,
'fertilization_state': fertilization_config.isAutoControl,
'fertilization_repeat_type': fertilization_config.repeatType,
'fertilization_hour': fertilization_config.hour,
'fertilization_minute': fertilization_config.minute,
'fertilization_repeat_circle': fertilization_config.repeatCircle,
'fertilization_hint_text': '自动施肥周期',
'watering_state': watering_config.isAutoControl,
'watering_repeat_type': watering_config.repeatType,
'watering_hour': watering_config.hour,
'watering_minute': watering_config.minute,
'watering_repeat_circle': watering_config.repeatCircle,
'watering_hint_text': '自动浇水周期',
},ensure_ascii=False))
return HttpResponse(JSON_PERMISSION_DENIED)
elif getUserList[0] == authorization.RESULT_TOKEN_NOT_EXIST:
return HttpResponse(JSON_LOGIN_REQUIRE)
else:
return HttpResponse(JSON_OPPERATION_FAIL)
def setting(request):
if not checkHasPermissionModifyConfig(request.user):
return forbidden(request)
temperature_config = config.get_temperature_config()
humidity_config = config.get_humidity_config()
dirt_humidity_config = config.get_dirt_humidity_config()
fertilization_config = config.get_fertilization_config()
watering_config = config.get_water_config()
print('获取到的温度上限动作为 : '+str(temperature_config.upperActions))
return render(request,'farm/setting.html',context={
'temperature_state':temperature_config.isAutoControl,
'temperature_upper_limit':temperature_config.upperLimit,
'temperature_lower_limit':temperature_config.lowerLimit,
'temperature_upper_actions':temperature_config.upperActions,
'temperature_lower_actions':temperature_config.lowerActions,
'himidity_state':humidity_config.isAutoControl,
'himidity_upper_limit':humidity_config.upperLimit,
'himidity_lower_limit':humidity_config.lowerLimit,
'himidity_upper_actions':humidity_config.upperActions,
'himidity_lower_actions':humidity_config.lowerActions,
'dirt_himidity_state':dirt_humidity_config.isAutoControl,
'dirt_himidity_upper_limit':dirt_humidity_config.upperLimit,
'dirt_himidity_lower_limit':dirt_humidity_config.lowerLimit,
'dirt_himidity_upper_actions':dirt_humidity_config.upperActions,
'dirt_himidity_lower_actions':dirt_humidity_config.lowerActions,
'fertilization_state':fertilization_config.isAutoControl,
'fertilization_repeat_type':fertilization_config.repeatType,
'fertilization_hour':fertilization_config.hour,
'fertilization_minute':fertilization_config.minute,
'fertilization_repeat_circle':fertilization_config.repeatCircle,
'fertilization_hint_text':'自动施肥周期',
'watering_state':watering_config.isAutoControl,
'watering_repeat_type':watering_config.repeatType,
'watering_hour':watering_config.hour,
'watering_minute':watering_config.minute,
'watering_repeat_circle':watering_config.repeatCircle,
'watering_hint_text':'自动浇水周期',
})
def run(self):
print('正在监听局域网的数据包')
while (self.isRunning):
data, addr = UdpSocketHolder.instance().udpSocket.recvfrom(1024)
# print('数据包 => ' + self.bytesToHexString(data))
# 11 99 FF 01 00 00 00 00 00 01 05 0A 00 16 00 2E 00 14 00 33 00 1F F0 90 10
if (len(data) == 33 and data[0] == 0x11 and data[1] == 0x99 and data[2] == 0xff and data[30] == 0xf0 and
data[31] == 0x90 and data[32] == 0x10):
# 设备部分
temp_device1_state = 1 if (data[3] & 0x01) > 0 else 0
temp_device2_state = 1 if (data[3] & 0x02) > 0 else 0
temp_device3_state = 1 if (data[3] & 0x04) > 0 else 0
temp_device4_state = 1 if (data[3] & 0x08) > 0 else 0
config.set_devices_config(temp_device1_state, temp_device2_state, temp_device3_state,
temp_device4_state)
state.device_1 = temp_device1_state
state.device_2 = temp_device2_state
state.device_3 = temp_device3_state
state.device_4 = temp_device4_state
# 其他部分
temp_fan_state = data[4]
temp_warm_state = data[5]
temp_fertilization_state = data[6]
temp_water_state = data[7]
temp_buzzer_state = data[8]
# 灯光部分
temp_light_state = data[9]
temp_light_color = data[10]
temp_light_level = data[11]
state.light = temp_light_state
state.light_color = temp_light_color
state.light_level = temp_light_level
# 上下限部分
temp_air_temp = data[13]
state.temperature_air = temp_air_temp
temp_air_humidity = data[15]
state.humidity_air = temp_air_humidity
temp_dirt_temp = data[17]
state.temperature_dirt = temp_dirt_temp
temp_dirt_humidity = data[19]
state.humidity_dirt = temp_dirt_humidity
temp_ad_light = data[21]
air_temp_up = data[22]
air_temp_low = data[23]
tempAirTempObj = config.get_temperature_config()
tempAirTempObj.upperLimit = air_temp_up
tempAirTempObj.lowerLimit = air_temp_low
config.set_temperature_config_obj(tempAirTempObj)
air_humidity_up = data[24]
air_humidity_low = data[25]
tempAirHumidityObj = config.get_humidity_config()
tempAirHumidityObj.upperLimit = air_humidity_up
tempAirHumidityObj.lowerLimit = air_humidity_low
config.set_dumidity_config_obj(tempAirHumidityObj)
dirt_temp_up = data[26] # 没用上
dirt_temp_low = data[27] # 没用上
dirt_humidity_up = data[28]
dirt_humidity_low = data[29]
tempDirtHumidityObj = config.get_dirt_humidity_config()
tempDirtHumidityObj.upperLimit = dirt_humidity_up
tempDirtHumidityObj.lowerLimit = dirt_humidity_low
config.set_dirt_humidity_config_obj(tempDirtHumidityObj)
print('设备1 => ' + str(temp_device1_state)
+ ' 设备2 => ' + str(temp_device2_state)
+ '\n设备3 => ' + str(temp_device3_state)
+ ' 设备4 => ' + str(temp_device4_state)
+ '\n风扇 => ' + str(temp_fan_state)
+ ' 加热膜 => ' + str(temp_warm_state)
+ '\n施肥 => ' + str(temp_fertilization_state)
+ ' 浇水 => ' + str(temp_water_state)
+ '\nBUzzer => ' + str(temp_buzzer_state)
+ ' 灯光 => ' + str(temp_light_state)
+ '\n颜色 => ' + str(temp_light_color)
+ ' 亮度 => ' + str(temp_light_level)
+ '\n气温 => ' + str(temp_air_temp)
+ ' 气湿 => ' + str(temp_air_humidity)
+ '\n土温 => ' + str(temp_dirt_temp)
+ ' 土湿 => ' + str(temp_dirt_humidity)
+ ' 亮度 => ' + str(temp_ad_light)
+ '\n气温上限 => ' + str(air_temp_up)
+ ' 气温下限 => ' + str(air_temp_low)
+ '\n气湿上限 => ' + str(air_humidity_up)
+ ' 气湿下限 => ' + str(air_humidity_low)
+ '\n土温上限 => ' + str(dirt_temp_up)
+ ' 土温下限 => ' + str(dirt_temp_low)
+ '\n土湿上限 => ' + str(dirt_humidity_up)
+ ' 土湿下限 => ' + str(dirt_humidity_low)
)
localTime = time.localtime()
localYear = time.strftime('%Y', localTime)
localMonth = time.strftime('%m', localTime)
localDay = time.strftime('%d', localTime)
localHour = time.strftime('%H', localTime)
localMinute = time.strftime('%M', localTime)
localSecond = time.strftime('%S', localTime)
sensorData = Sensor(year=localYear, month=localMonth, day=localDay, hour=localHour, minute=localMinute,
second=localSecond,
light=temp_ad_light, air_temperature=temp_air_temp, dirt_temperature=temp_dirt_temp,
air_humidity=temp_air_humidity,
dirt_humidity=temp_dirt_humidity, device_id='0')
sensorData.save()
# 下面就很难看了，不好意思，因为时间紧迫，实在抱歉
# 发现这里我的CONFIG里面的上下限定义都没用上，一开始没做好规划真的难受
configTemperature = config.get_temperature_config()
configHumidityAir = config.get_humidity_config()
configHumidityDirt = config.get_dirt_humidity_config()
# 温度上限处理
flag_is_need_reset = False
if configTemperature.isAutoControl == str(config.STATE_ON):
if temp_air_temp > air_temp_up: # 温度超过上线
self.actionLimit(configTemperature.upperActions)
flag_is_need_reset = True
if temp_air_temp < air_temp_low: # 温度低于下线
self.actionLimit(configTemperature.upperActions)
flag_is_need_reset = True
if configHumidityAir.isAutoControl == str(config.STATE_ON):
if temp_air_humidity > dirt_humidity_up: # 空气适度超过上线
self.actionLimit(configHumidityAir.upperActions)
flag_is_need_reset = True
if temp_air_humidity < air_humidity_low: # 空气适度低于下线
self.actionLimit(configHumidityAir.lowerActions)
flag_is_need_reset = True
if configHumidityDirt.isAutoControl == str(config.STATE_ON):
if temp_dirt_humidity > dirt_humidity_up: # 土壤适度超过上线
self.actionLimit(configHumidityDirt.upperActions)
flag_is_need_reset = True
if temp_dirt_humidity < dirt_humidity_low: # 土壤湿度低于下线
self.actionLimit(configHumidityDirt.lowerActions)
flag_is_need_reset = True
if flag_is_need_reset :
time.sleep(0.3)
sendCmdReset()
USE_I18N = True
USE_L10N = True
USE_TZ = True
# Static files (CSS, JavaScript, Images)
# https://docs.djangoproject.com/en/1.10/howto/static-files/
STATIC_URL = '/static/'
STATICFILES_DIRS = (
os.path.join(BASE_DIR, "static"),
)
# 初始化！
# 初始化UDP Socket
# socket.init()
# 初始化配置变量
temperatureConfig = config.get_temperature_config()
state.temperature_upper = temperatureConfig.upperLimit
state.temperature_lower = temperatureConfig.lowerLimit
humidityAirConfig = config.get_humidity_config()
state.humidity_air_upper = humidityAirConfig.upperLimit
state.humidity_air_lower = humidityAirConfig.lowerLimit
humidityDirtConfig = config.get_dirt_humidity_config()
state.humidity_dirt_upper = humidityDirtConfig.upperLimit
state.humidity_dirt_lower = humidityDirtConfig.lowerLimit