def main() -> None:
"""Check overlapping claims on fabric."""
# Part A
test_answer = 4
file = config.TestFile(test_answer)
fabric = render_fabric(file.contents)
test = calculate_overlapping_area(fabric)
file.test(test)
file = config.File()
fabric = render_fabric(file.contents)
result = calculate_overlapping_area(fabric)
config.LOGGER.info(f'A: {result}')
# Part B
test_answer = 3
file = config.TestFile(test_answer)
fabric = render_fabric(file.contents)
test = find_non_overlapping_claim(fabric)
file.test(test)
file = config.File()
fabric = render_fabric(file.contents)
result = find_non_overlapping_claim(fabric)
config.LOGGER.info(f'B: {result}')
def main() -> None:
"""Determine path through a map of trees."""
# Part A
test_answer = 7
file = config.TestFile(test_answer)
count = count_trees(file.contents, 3, 1)
file.test(count)
# Part B
test_answer = 336 # = 2 * 7 * 3 * 4 * 2
file = config.TestFile(test_answer)
slopes = [
(1, 1),
# (3, 1), # This slope is already calculated.
# Rather than calculate the count again, just multiply results from
# the other slopes onto the existing count.
(5, 1),
(7, 1),
(1, 2),
]
for slope in slopes:
count *= count_trees(file.contents, *slope)
file.test(count)
# Part A
file = config.File()
count = count_trees(file.contents, 3, 1)
config.log_part_info('A', count)
for slope in slopes:
count *= count_trees(file.contents, *slope)
config.log_part_info('B', count)
def main() -> None:
"""Check joltages of the adapters from the outlet to device."""
test_answer = 35
file = config.TestFile(test_answer, to_type=int)
test = calculate_diff_occurrence(file.contents)
file.test(test)
test_answer = 220
file = config.TestFile(test_answer,
path="another_test_input.txt",
to_type=int)
test = calculate_diff_occurrence(file.contents)
file.test(test)
file = config.File(to_type=int)
result = calculate_diff_occurrence(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Simulate cycles for Conway Cubes."""
test_answer = 112
file = config.TestFile(test_answer)
test = iterate_conway_cubes(file.contents)
file.test(test)
file = config.File()
result = iterate_conway_cubes(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 198
test_file = config.TestFile(test_answer)
test = determine_power_consumption(test_file.contents)
test_file.test(test)
file = config.File()
result = determine_power_consumption(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 1656
test_file = config.TestFile(test_answer)
test = count_octopus_flashes(test_file.contents)
test_file.test(test)
file = config.File()
result = count_octopus_flashes(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Read and count valid passports."""
test_answer = 2
file = config.TestFile(test_answer)
test = validate(file.contents)
file.test(test)
file = config.File()
result = validate(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 61229
test_file = config.TestFile(test_answer)
test = determine_output_sum(test_file.contents)
test_file.test(test)
file = config.File()
result = determine_output_sum(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 1134
test_file = config.TestFile(test_answer)
test = find_basins(test_file.contents)
test_file.test(test)
file = config.File()
result = find_basins(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 288957
test_file = config.TestFile(test_answer)
test = fix_incomplete_lines(test_file.contents)
test_file.test(test)
file = config.File()
result = fix_incomplete_lines(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 1924
test_file = config.TestFile(test_answer)
test = play_bingo(test_file.contents)
test_file.test(test)
file = config.File()
result = play_bingo(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Parse and read train ticket."""
test_answer = 71 # 4 + 55 + 12
file = config.TestFile(test_answer)
test = find_sum_all_invalid_values(file.contents)
file.test(test)
file = config.File()
result = find_sum_all_invalid_values(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 1588
test_file = config.TestFile(test_answer)
test = combine_polymers_and_diff_most_least(test_file.contents)
test_file.test(test)
file = config.File()
result = combine_polymers_and_diff_most_least(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 230
test_file = config.TestFile(test_answer)
test = determine_life_support_rating(test_file.contents)
test_file.test(test)
file = config.File()
result = determine_life_support_rating(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 26984457539
test_file = config.TestFile(test_answer)
test = lanternfish.count_lanternfish(test_file.contents, days=256)
test_file.test(test)
file = config.File()
result = lanternfish.count_lanternfish(file.contents, days=256)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 5
test_file = config.TestFile(test_answer)
test = calculate_depth_increases(test_file.contents)
test_file.test(test)
file = config.File()
result = calculate_depth_increases(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 15
test_file = config.TestFile(test_answer)
test = sum_risk_in_map(test_file.contents)
test_file.test(test)
file = config.File()
result = sum_risk_in_map(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 17
test_file = config.TestFile(test_answer)
test = calculate_dots_in_paper(test_file.contents)
test_file.test(test)
file = config.File()
result = calculate_dots_in_paper(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Check joltages of the adapters from the outlet to device."""
test_answer = 8
file = config.TestFile(test_answer, to_type=int, sort=True)
test = calculate_tree_diffs(file.contents)
file.test(test)
test_answer = 19208
file = config.TestFile(test_answer,
path="another_test_input.txt",
to_type=int,
sort=True)
file.write_to_file()
test = calculate_tree_diffs(file.contents)
file.test(test)
file = config.File(to_type=int, sort=True)
result = calculate_tree_diffs(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Navigate given the ship's directions."""
test_answer = 25 # E 17, S 8
file = config.TestFile(test_answer)
test = manhattan_distance(file.contents)
file.test(test)
file = config.File()
result = manhattan_distance(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 900
test_file = config.TestFile(test_answer)
test = calculate_submarine_position(test_file.contents)
test_file.test(test)
file = config.File()
result = calculate_submarine_position(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 26397
test_file = config.TestFile(test_answer)
test = catch_syntax_errors(test_file.contents)
test_file.test(test)
file = config.File()
result = catch_syntax_errors(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Read program data from port computer system."""
test_answer = 165
file = config.TestFile(test_answer)
test = read_program_data(file.contents)
file.test(test)
file = config.File()
result = read_program_data(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 5934
test_file = config.TestFile(test_answer)
test = lanternfish.count_lanternfish(test_file.contents)
test_file.test(test)
file = config.File()
result = lanternfish.count_lanternfish(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 37
test_file = config.TestFile(test_answer)
test = calculate_min_crab_sub_fuel(test_file.contents)
test_file.test(test)
file = config.File()
result = calculate_min_crab_sub_fuel(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 40
test_file = config.TestFile(test_answer)
test = get_least_risk(test_file.contents)
test_file.test(test)
file = config.File()
result = get_least_risk(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Check the seating of the ferry."""
test_answer = 26
file = config.TestFile(test_answer)
test = simulate_seating(file.contents)
file.test(test)
file = config.File()
result = simulate_seating(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 26
test_file = config.TestFile(test_answer)
test = count_1_4_7_8s_in_output(test_file.contents)
test_file.test(test)
file = config.File()
result = count_1_4_7_8s_in_output(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 112
test_file = config.TestFile(test_answer)
test = count_hitting_trajectories(test_file.contents)
test_file.test(test)
file = config.File()
result = count_hitting_trajectories(file.contents)
config.LOGGER.info(result)
def main() -> None:
"""Run the main code."""
test_answer = 12
test_file = config.TestFile(test_answer)
test = calculate_graph_intersections(test_file.contents)
test_file.test(test)
file = config.File()
result = calculate_graph_intersections(file.contents)
config.LOGGER.info(result)
