def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "board.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
self.sensors = []
self.heaters = []
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = set()
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
self.parseDefineName(ln)
self.parseDefineValue(ln)
# Set all boolean generic configuration items to False, so items not yet
# existing in the user configuration default to disabled.
#
# An alternative would be to allow both, enabled and disabled booleans
# in board.generic.h, which then allows to set an appropriate default for
# each #define. This was tried but conflicted with config file writing code
# below (disabled #defines were reset to the default, even when set
# differently in the GUI), so this would need adjustment, too.
for k in self.cfgValues.keys():
if isinstance(self.cfgValues[k], bool):
self.cfgValues[k] = False
# Read the user configuration. This usually overwrites all of the items
# read above, but not those missing in the user configuration, e.g.
# when reading an older config.
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseDefineValue(ln):
continue
m = reDefTS.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseSensor(t[0])
if s:
self.sensors.append(s)
continue
m = reDefHT.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseHeater(t[0])
if s:
self.heaters.append(s)
continue
# Parsing done. All parsed stuff is now in these arrays and dicts.
if self.settings.verbose >= 2:
print(self.sensors)
print(self.heaters)
print(self.candHeatPins)
print(self.candThermPins)
print(self.candProcessors)
print(self.candClocks)
print(self.tempTables)
print(self.cfgValues) # #defines with a value.
print(self.cfgNames) # Names found in the generic file.
if self.settings.verbose >= 3:
print(self.helpText)
for k in range(len(self.sensors)):
tn = self.sensors[k][0].upper()
if tn in self.tempTables.keys():
self.sensors[k][3] = self.tempTables[tn]
else:
self.sensors[k][3] = None
return True, None
def loadConfigFile(self, fn):
try:
self.cfgBuffer = list(open(fn))
except:
return False
self.configFile = fn
self.processors = []
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace(
"\n\n ", "\n\n ")
helpTextString = helpTextString.replace(
"\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if ln.lstrip().startswith("//"):
continue
if ln.lstrip().startswith("#define"):
m = reDefQS.search(ln)
if m:
t = m.groups()
if len(t) == 2:
m = reDefQSm.search(ln)
if m:
t = m.groups()
tt = re.findall(reDefQSm2, t[1])
if len(tt) == 1:
self.cfgValues[t[0]] = tt[0]
continue
elif len(tt) > 1:
self.cfgValues[t[0]] = tt
continue
m = reDefine.search(ln)
if m:
t = m.groups()
if len(t) == 2:
self.cfgValues[t[0]] = t[1]
continue
m = reDefBool.search(ln)
if m:
t = m.groups()
if len(t) == 1:
self.cfgValues[t[0]] = True
if os.path.basename(fn) in protectedFiles:
self.parent.enableSavePrinter(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSavePrinter(True, True)
self.parent.setPrinterTabFile(os.path.basename(fn))
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
k = 'DC_EXTRUDER'
if k in self.cfgValues.keys():
self.pgMiscellaneous.setOriginalHeater(self.cfgValues[k])
else:
self.pgMiscellaneous.setOriginalHeater(None)
return True
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "printer.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace(
"\n\n ", "\n\n ")
helpTextString = helpTextString.replace(
"\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
self.parseDefineName(ln)
self.parseDefineValue(ln)
# Set all boolean generic configuration items to False, so items not yet
# existing in the user configuration default to disabled.
for k in self.cfgValues.keys():
if isinstance(self.cfgValues[k], bool):
self.cfgValues[k] = False
# Read the user configuration. This usually overwrites all of the items
# read above, but not those missing in the user configuration, e.g.
# when reading an older config.
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
self.parseDefineValue(ln)
# Parsing done. All parsed stuff is now in these array and dicts.
if self.settings.verbose >= 2:
print self.cfgValues # #defines with a value.
print self.cfgNames # Names found in the generic file.
if self.settings.verbose >= 3:
print self.helpText
return True, None
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "board.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
self.processors = []
self.sensors = []
self.heaters = []
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace(
"\n\n ", "\n\n ")
helpTextString = helpTextString.replace(
"\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseDefineName(ln):
continue
# Ignore candidates in the metadata file.
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
elif self.parseDefineValue(ln):
continue
else:
m = reDefTS.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseSensor(t[0])
if s:
self.sensors.append(s)
continue
m = reDefHT.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseHeater(t[0])
if s:
self.heaters.append(s)
continue
# Parsing done. All parsed stuff is now in these arrays and dicts.
# Uncomment for debugging.
#print self.processors
#print self.sensors
#print self.heaters
#print self.candHeatPins
#print self.candThermPins
#print self.candProcessors
#print self.candClocks
#print self.tempTables
#print self.cfgValues # #defines with a value and booleans.
#print self.cfgNames # Names found in the generic file.
#print self.helpText
for k in range(len(self.sensors)):
tn = self.sensors[k][0].upper()
if tn in self.tempTables.keys():
self.sensors[k][3] = self.tempTables[tn]
else:
self.sensors[k][3] = None
if os.path.basename(fn) in protectedFiles:
self.parent.enableSaveBoard(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSaveBoard(True, True)
self.parent.setBoardTabFile(os.path.basename(fn))
self.pgHeaters.setCandidatePins(self.candHeatPins)
self.pgSensors.setCandidatePins(self.candThermPins)
self.pgCpu.setCandidateProcessors(self.candProcessors)
self.pgCpu.setCandidateClocks(self.candClocks)
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
self.pgSensors.setSensors(self.sensors)
self.pgHeaters.setHeaters(self.heaters)
return True, None
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "printer.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
self.processors = []
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace(
"\n\n ", "\n\n ")
helpTextString = helpTextString.replace(
"\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseDefineName(ln):
continue
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseDefineValue(ln):
continue
if os.path.basename(fn) in protectedFiles:
self.parent.enableSavePrinter(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSavePrinter(True, True)
self.parent.setPrinterTabFile(os.path.basename(fn))
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
k = 'DC_EXTRUDER'
if k in self.cfgValues.keys() and self.cfgValues[k][1] == True:
self.pgMiscellaneous.setOriginalHeater(self.cfgValues[k][0])
else:
self.pgMiscellaneous.setOriginalHeater(None)
return True, None
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "board.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
self.processors = []
self.sensors = []
self.heaters = []
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseDefineName(ln):
continue
# Ignore candidates in the metadata file.
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
elif self.parseDefineValue(ln):
continue
else:
m = reDefTS.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseSensor(t[0])
if s:
self.sensors.append(s)
continue
m = reDefHT.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseHeater(t[0])
if s:
self.heaters.append(s)
continue
for k in range(len(self.sensors)):
tn = self.sensors[k][0].upper()
if tn in self.tempTables.keys():
self.sensors[k][3] = self.tempTables[tn]
else:
self.sensors[k][3] = None
if os.path.basename(fn) in protectedFiles:
self.parent.enableSaveBoard(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSaveBoard(True, True)
self.parent.setBoardTabFile(os.path.basename(fn))
self.pgHeaters.setCandidatePins(self.candHeatPins)
self.pgSensors.setCandidatePins(self.candThermPins)
self.pgCpu.setCandidateProcessors(self.candProcessors)
self.pgCpu.setCandidateClocks(self.candClocks)
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
self.pgSensors.setSensors(self.sensors)
self.pgHeaters.setHeaters(self.heaters)
return True, None
def loadConfigFile(self, fn):
try:
self.cfgBuffer = list(open(fn))
except:
return False
self.configFile = fn
self.processors = []
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if ln.lstrip().startswith("//"):
continue
if ln.lstrip().startswith("#define"):
m = reDefQS.search(ln)
if m:
t = m.groups()
if len(t) == 2:
m = reDefQSm.search(ln)
if m:
t = m.groups()
tt = re.findall(reDefQSm2, t[1])
if len(tt) == 1:
self.cfgValues[t[0]] = tt[0]
continue
elif len(tt) > 1:
self.cfgValues[t[0]] = tt
continue
m = reDefine.search(ln)
if m:
t = m.groups()
if len(t) == 2:
self.cfgValues[t[0]] = t[1]
continue
m = reDefBool.search(ln)
if m:
t = m.groups()
if len(t) == 1:
self.cfgValues[t[0]] = True
if os.path.basename(fn) in protectedFiles:
self.parent.enableSavePrinter(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSavePrinter(True, True)
self.parent.setPrinterTabFile(os.path.basename(fn))
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
k = 'DC_EXTRUDER'
if k in self.cfgValues.keys():
self.pgMiscellaneous.setOriginalHeater(self.cfgValues[k])
else:
self.pgMiscellaneous.setOriginalHeater(None)
return True
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "board.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
self.sensors = []
self.heaters = []
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
self.tempTables = {}
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
self.parseDefineName(ln)
self.parseDefineValue(ln)
# Set all boolean generic configuration items to False, so items not yet
# existing in the user configuration default to disabled.
#
# An alternative would be to allow both, enabled and disabled booleans
# in board.generic.h, which then allows to set an appropriate default for
# each #define. This was tried but conflicted with config file writing code
# below (disabled #defines were reset to the default, even when set
# differently in the GUI), so this would need adjustment, too.
for k in self.cfgValues.keys():
if isinstance(self.cfgValues[k], bool):
self.cfgValues[k] = False
# Read the user configuration. This usually overwrites all of the items
# read above, but not those missing in the user configuration, e.g.
# when reading an older config.
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseDefineValue(ln):
continue
m = reDefTS.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseSensor(t[0])
if s:
self.sensors.append(s)
continue
m = reDefHT.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseHeater(t[0])
if s:
self.heaters.append(s)
continue
# Parsing done. All parsed stuff is now in these arrays and dicts.
if self.settings.verbose >= 2:
print self.sensors
print self.heaters
print self.candHeatPins
print self.candThermPins
print self.candProcessors
print self.candClocks
print self.tempTables
print self.cfgValues # #defines with a value.
print self.cfgNames # Names found in the generic file.
if self.settings.verbose >= 3:
print self.helpText
for k in range(len(self.sensors)):
tn = self.sensors[k][0].upper()
if tn in self.tempTables.keys():
self.sensors[k][3] = self.tempTables[tn]
else:
self.sensors[k][3] = None
return True, None
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "printer.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseDefineName(ln):
continue
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseDefineValue(ln):
continue
# Parsing done. All parsed stuff is now in these arrays and dicts.
# Uncomment for debugging.
#print self.cfgValues # #defines with a value and booleans.
#print self.cfgNames # Names found in the generic file.
#print self.helpText
if os.path.basename(fn) in protectedFiles:
self.parent.enableSavePrinter(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSavePrinter(True, True)
self.parent.setPrinterTabFile(os.path.basename(fn))
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
k = 'DC_EXTRUDER'
if k in self.cfgValues.keys() and self.cfgValues[k][1] == True:
self.pgMiscellaneous.setOriginalHeater(self.cfgValues[k][0])
else:
self.pgMiscellaneous.setOriginalHeater(None)
return True, None
def loadConfigFile(self, fn):
cfgFn = os.path.join(self.cfgDir, "printer.generic.h")
try:
self.cfgBuffer = list(open(cfgFn))
except:
return False, cfgFn
try:
self.userBuffer = list(open(fn))
except:
return False, fn
self.configFile = fn
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.cfgNames = []
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseHoming(ln):
continue
self.parseDefineName(ln)
self.parseDefineValue(ln)
# Set all boolean generic configuration items to False, so items not yet
# existing in the user configuration default to disabled.
for k in self.cfgValues.keys():
if isinstance(self.cfgValues[k], bool):
self.cfgValues[k] = False
# Read the user configuration. This usually overwrites all of the items
# read above, but not those missing in the user configuration, e.g.
# when reading an older config.
gatheringHelpText = False
prevLines = ""
for ln in self.userBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
continue
if reHelpTextStart.match(ln):
gatheringHelpText = True
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if self.parseCandidateValues(ln):
continue
if self.parseHoming(ln):
continue
self.parseDefineValue(ln)
# Parsing done. All parsed stuff is now in these array and dicts.
if self.settings.verbose >= 2:
print self.cfgValues # #defines with a value.
print self.cfgNames # Names found in the generic file.
if self.settings.verbose >= 3:
print self.helpText
return True, None
def loadConfigFile(self, fn):
try:
self.cfgBuffer = list(open(fn))
except:
return False
self.configFile = fn
self.processors = []
self.sensors = []
self.heaters = []
self.candHeatPins = []
self.candThermPins = []
self.candProcessors = []
self.candClocks = []
tempTables = {}
gatheringHelpText = False
helpTextString = ""
helpKey = None
self.cfgValues = {}
self.helpText = {}
prevLines = ""
for ln in self.cfgBuffer:
if gatheringHelpText:
if reHelpTextEnd.match(ln):
gatheringHelpText = False
helpTextString = helpTextString.strip()
# Keep paragraphs with double-newline.
helpTextString = helpTextString.replace("\n\n ", "\n\n")
# Keep indented lines, typically a list.
helpTextString = helpTextString.replace("\n\n ", "\n\n ")
helpTextString = helpTextString.replace("\n ", "\n\n ")
# Remove all other newlines and indents.
helpTextString = helpTextString.replace("\n ", " ")
hk = helpKey.split()
for k in hk:
self.helpText[k] = helpTextString
helpTextString = ""
helpKey = None
continue
else:
helpTextString += ln
continue
m = reHelpTextStart.match(ln)
if m:
t = m.groups()
gatheringHelpText = True
helpKey = t[0]
continue
if ln.rstrip().endswith("\\"):
prevLines += ln.rstrip()[:-1]
continue
if prevLines != "":
ln = prevLines + ln
prevLines = ""
if ln.lstrip().startswith("//"):
m = reCandThermPins.match(ln)
if m:
t = m.groups()
if len(t) == 1:
self.candThermPins.append(t[0])
continue
m = reCandHeatPins.match(ln)
if m:
t = m.groups()
if len(t) == 1:
self.candHeatPins.append(t[0])
continue
m = reCandProcessors.match(ln)
if m:
t = m.groups()
if len(t) == 1:
self.candProcessors.append(t[0])
continue
m = reCandCPUClocks.match(ln)
if m:
t = m.groups()
if len(t) == 1:
self.candClocks.append(t[0])
continue
m = reDefTT.match(ln)
if m:
t = m.groups()
if len(t) == 2:
s = self.parseTempTable(t[1])
if s:
tempTables[t[0]] = s
continue
continue
if ln.lstrip().startswith("#define"):
m = reDefQS.search(ln)
if m:
t = m.groups()
if len(t) == 2:
m = reDefQSm.search(ln)
if m:
t = m.groups()
tt = re.findall(reDefQSm2, t[1])
if len(tt) == 1:
self.cfgValues[t[0]] = tt[0]
continue
elif len(tt) > 1:
self.cfgValues[t[0]] = tt
continue
m = reDefine.search(ln)
if m:
t = m.groups()
if len(t) == 2:
self.cfgValues[t[0]] = t[1]
if reFloatAttr.search(ln):
pass
continue
m = reDefBool.search(ln)
if m:
t = m.groups()
if len(t) == 1:
self.cfgValues[t[0]] = True
else:
m = reDefTS.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseSensor(t[0])
if s:
self.sensors.append(s)
continue
m = reDefHT.search(ln)
if m:
t = m.groups()
if len(t) == 1:
s = self.parseHeater(t[0])
if s:
self.heaters.append(s)
continue
for k in range(len(self.sensors)):
tn = self.sensors[k][0].upper()
if tn in tempTables.keys():
self.sensors[k][3] = tempTables[tn]
else:
self.sensors[k][3] = None
if os.path.basename(fn) in protectedFiles:
self.parent.enableSaveBoard(False, True)
self.protFileLoaded = True
else:
self.protFileLoaded = False
self.parent.enableSaveBoard(True, True)
self.parent.setBoardTabFile(os.path.basename(fn))
self.pgHeaters.setCandidatePins(self.candHeatPins)
self.pgSensors.setCandidatePins(self.candThermPins)
self.pgCpu.setCandidateProcessors(self.candProcessors)
self.pgCpu.setCandidateClocks(self.candClocks)
for pg in self.pages:
pg.insertValues(self.cfgValues)
pg.setHelpText(self.helpText)
self.pgSensors.setSensors(self.sensors)
self.pgHeaters.setHeaters(self.heaters)
return True