def setting_mode_confirm(request):
new_op_mode = request.POST.get('mode', 'error')
if new_op_mode == 'error':
log.debug("setting_mode_confirm, op_mode: error")
pass
# log.debug("setting_mode_confirm: " + new_op_mode)
op_mode = OperationModeLogger.objects.latest('id').opMode
temp_mode = TemperatureModeLogger.objects.latest('id').tempMode
# op_mode가 변경된 경우 저장
if op_mode != new_op_mode:
oml = OperationModeLogger(
dateTime=timezone.now(), opMode=new_op_mode
).save()
cmd = controller.read_cmd()
now = str(timezone.now())[:-7]
cmd.update({
"datetime":now,
"op_mode":new_op_mode,
"temp_mode": temp_mode,
})
controller.write_cmd(cmd)
# log.debug("write_cmd from settimg_mode_confirm")
# log.debug(cmd)
response_data = {
"op_mode": new_op_mode,
"temp_mode": temp_mode,
}
# return reload_display(request)
return HttpResponse(json.dumps(response_data), content_type="application/json")
def toggle_switch(request):
# 심정펌프 스위치 on/off 버튼 클릭시 제어
if not request.POST:
return render_to_response('monitor/container.html', context_instance=RequestContext(request))
location = request.POST.get('id', 'error')
loc = location.upper()
switch = request.POST.get('switch', 'error').encode('utf-8').upper()
if switch == 'error':
# log.debug("toggle_switch, switch: error")
pass
# op_mode = OperationModeLogger.objects.latest('id').opMode
# temp_mode = TemperatureModeLogger.objects.latest('id').tempMode
cmd = controller.read_cmd()
now = str(timezone.now())[:-7]
cmd.update({'datetime':now})
# 심정 펌프 갱신
if loc == 'DWP1':
cmd.update({'dwp1':switch})
elif loc == 'DWP2':
cmd.update({'dwp2':switch})
elif loc == 'DWP3':
cmd.update({'dwp3':switch})
elif loc == 'DWP4':
cmd.update({'dwp4':switch})
# 커맨드 파일 작성
controller.write_cmd(cmd)
# log.debug("write_cmd from toggle_switch")
# 커맨드 후 hmidata를 잠시동안 읽지 않는다.
global flag_command
flag_command = 1
# html = render_to_string('monitor/right_top.html', response_data, RequestContext(request))
# return HttpResponseBadRequest
return HttpResponse('')
def setting_cp_done(request):
# 순환펌프 동작을 설정했을 때 적용
response_data = {}
cp_operating = int(request.POST.get('cpOperating',0))
cp1switch = request.POST.get('cp1switch', 'error').encode('utf-8')
cp1hz = int(request.POST.get('cp1hz', 0))
cp1flux = int(request.POST.get('cp1flux', 0))
cp2switch = request.POST.get('cp2switch', 'error').encode('utf-8')
cp2hz = int(request.POST.get('cp2hz', 0))
cp2flux = int(request.POST.get('cp2flux', 0))
# op_mode = OperationModeLogger.objects.latest('id').opMode
# temp_mode = TemperatureModeLogger.objects.latest('id').tempMode
# 설정 값 db에 저장
# controller.set_cp(1, op_mode, cp1switch, cp1hz, cp1flux)
# controller.set_cp(2, op_mode, cp2switch, cp2hz, cp2flux)
# cmdmain에 기록
# ######## controller.write_cmd()
# cp1 = CirculatingPump1Logger.objects.latest('id')
# cp2 = CirculatingPump2Logger.objects.latest('id')
# dwp1 = DeepwellPump1Logger.objects.latest('id')
# dwp2 = DeepwellPump2Logger.objects.latest('id')
# dwp3 = DeepwellPump3Logger.objects.latest('id')
# dwp4 = DeepwellPump4Logger.objects.latest('id')
# rt = RefrigerationTonLogger.objects.latest('id')
cmd = controller.read_cmd()
now = str(timezone.now())[:-7]
if cp1switch == "OFF":
cp1hz = 0
cp1flux = 0
if cp2switch == "OFF":
cp2hz = 0
cp2flux = 0
cmd.update({
'datetime':now,
'cp_operating': cp_operating,
'cp1': cp1switch,
'cp1_hz': cp1hz,
'cp1_flux': cp1flux,
'cp2': cp2switch,
'cp2_hz': cp2hz,
'cp2_flux': cp2flux,
})
# log.debug("write_cmd from setting_cp_done")
controller.write_cmd(cmd)
# check if error exist
response_data = check_if_error_exist()
# 커맨드 후 hmidata를 잠시동안 읽지 않는다.
global flag_command
flag_command = 1
# 센서값 읽어오기
# response_data.update(controller.read_data_from_json(rt))
# if response_data == False:
# response_data = {"error":"file read error"}
# url = 'error/read.html'
# html = render_to_string(url, response_data)
# return HttpResponse(html)
# html = render_to_string('monitor/container.html', response_data, RequestContext(request))
return HttpResponse('')
def reload_display(request):
###########################################
# 3초마다 갱신해서 왼쪽 상태창, 오른쪽 실내기 정보 갱신
# 자동제어시, 자동제어 로직에 따라 hmi에 명령을 줌
# 수동인 경우 데이터 값만 갱신함.
###########################################
# check if error exist
response_data = check_if_error_exist()
# 실내기 정보 읽어오기
ciu_nav = request.POST.get('ciu_nav','f1')
response_data.update({'ciu_nav':ciu_nav})
if ciu_nav[0] == "f":
response_data.update(controller.get_CIU_from_json(ciu_nav[1]))
elif ciu_nav[0] == "h":
response_data.update(controller.get_CIU_on_HP_from_json(ciu_nav[1]))
else: # total
response_data.update(controller.get_CIU_total())
# 읽기 실패할 경우 읽을때까지 반복
while response_data["ciu_error"] != None:
if ciu_nav[0] == "f":
response_data.update(controller.get_CIU_from_json(ciu_nav[1]))
elif ciu_nav[0] == "h":
response_data.update(controller.get_CIU_on_HP_from_json(ciu_nav[1]))
else: # total
response_data.update(controller.get_CIU_total())
rt = response_data["rt_total"]
# 냉난방모드 확인
temp_mode = response_data["temp_mode"]
old_temp_mode = TemperatureModeLogger.objects.latest('id').tempMode
# log.debug("temp_mode: " +str(temp_mode))
# log.debug("old_temp_mode: " +str(old_temp_mode))
if temp_mode != old_temp_mode:
tm = TemperatureModeLogger(
dateTime=timezone.now(), tempMode=temp_mode
).save()
cmd = controller.read_cmd()
now = str(timezone.now())[:-7]
cmd.update({'datetime':now,'temp_mode':temp_mode})
controller.write_cmd(cmd)
global flag_command
if flag_command: # command를 준 후에 파일을 잠시 읽지 않는다.
import time
time.sleep(5)
flag_command = 0
# hmi에서 데이터 읽고 (자동)제어
# 수동인 경우 데이터 값(디스플레이)만 갱신함.
response_data.update(controller.read_data_from_json(rt))
# 읽기 실패할 경우 읽을때까지 반복
while response_data["hmidata_error"] != None:
response_data.update(controller.read_data_from_json(rt))
############### 통신 에러 처리 ############################
try:
timegap = response_data["datetime"] - timezone.now()
# log.debug(str(timegap.total_seconds()))
timegap_seconds = timegap.total_seconds()
except:
timegap_seconds = 15
if timegap_seconds < 15: # 일반적으로 25~27초
# log.debug("HMI not working or communication failed.")
create_CHP_file()
# 통신 에러 없는 경우
else:
# log.debug("HMI working")
error_file_name = 'errorlog_chp.json'
# 파일이 있다면
if os.path.isfile(file_path + error_file_name):
# log.debug("yes file")
# 파일에 closed time 적어준다.
with open(file_path + error_file_name) as data_file:
_data = json.load(data_file)
ct = dt.strftime(timezone.now(), datetime_format)
_data.update({"CT": ct})
with open(file_path + error_file_name, 'w') as fp:
json.dump(_data, fp)
# 없다면 그냥 pass
# log.debug("no file")
############### 통신 에러 처리 끝 #########################
# log.debug(str(response_data["us"][5]["state"]))
# log.debug(str(response_data["us"][6]["state"]))
# log.debug(str(response_data["us"][8]["state"]))
# 운전 모드 정보
# op_mode = OperationModeLogger.objects.latest('id').opMode
response_data.update({
# "op_mode": op_mode,
"temp_mode": temp_mode,
})
t = timezone.now()
# log.debug(str(response_data["error"]))
# ver._2016.07.19 rt from heatpump
# response_data["rt_total"] = response_data["rt"]["RT"]
# end ver._2016.07.19
# 데이터베이스 저장
# 중복 저장 방지
latest_data = DeepwellPump1Logger.objects.latest('id').dateTime
if (timezone.now() - latest_data).seconds > 5:
# 저장 주기마다 data save
save_interval = SaveIntervalLogger.objects.latest('id').interval
if save_interval == 10:
if t.minute % 10 == 0 and t.second < 5:
save_data(response_data)
elif save_interval == 30:
if t.minute % 30 == 0 and t.second < 5:
save_data(response_data)
elif save_interval == 60:
if t.minute == 0 and t.second < 5:
save_data(response_data)
else:
if t.minute % 5 == 0 and t.second < 5:
save_data(response_data)
url = 'monitor/container.html'
html = render_to_string(url, response_data, RequestContext(request))
return HttpResponse(html)