def __init__(self):
self.layout = Layout()
self.layer_buff = None
self.img_buff = Image()
self.fill_buff = []
# establish gerber defaults
self.params = {'AS':AxisDef('x', 'y'),# axis select
'FS':None, # format spec
'MI':AxisDef(0, 0), # mirror image
'MO':'IN', # mode: inches/mm
'OF':AxisDef(0, 0), # offset
'SF':AxisDef(1, 1), # scale factor
'IJ':AxisDef(('L', 0), # image justify
('L', 0)),
'IO':AxisDef(0, 0), # image offset
'IP':True, # image polarity
'IR':0} # image rotation
# simulate a photo plotter
self.status = {'x':0,
'y':0,
'draw':'OFF',
'interpolation':'LINEAR',
'aperture':None,
'outline_fill':False,
'multi_quadrant':False,
'units':None,
'incremental_coords':None}
def _extract_lp(self, name, tok):
""" Extract "layer param" and reset image layer. """
if self.img_buff.not_empty():
self.layer_buff.images.append(self.img_buff)
self.img_buff = Image('', self.img_buff.is_additive)
self.status.update({'x':0,
'y':0,
'draw':'OFF',
'interpolation':'LINEAR',
'aperture':None,
'outline_fill':False,
'multi_quadrant':False,
'units':None,
'incremental_coords':None})
if name == 'LN':
self.img_buff.name = tok
elif name == 'LP':
self.img_buff.is_additive = IMAGE_POLARITIES[tok]
elif name == 'SR':
tok, j = self._pop_val('J', tok, coerce_='float')
tok, i = self._pop_val('I', tok, coerce_='float')
tok, y = self._pop_val('Y', tok)
tok, x = self._pop_val('X', tok)
self.img_buff.x_repeats = x
self.img_buff.x_step = i
self.img_buff.y_repeats = y
self.img_buff.y_step = j
class Gerber:
""" The Gerber Format Parser """
def __init__(self):
self.layout = Layout()
self.layer_buff = None
self.img_buff = Image()
self.fill_buff = []
# establish gerber defaults
self.params = {'AS':AxisDef('x', 'y'),# axis select
'FS':None, # format spec
'MI':AxisDef(0, 0), # mirror image
'MO':'IN', # mode: inches/mm
'OF':AxisDef(0, 0), # offset
'SF':AxisDef(1, 1), # scale factor
'IJ':AxisDef(('L', 0), # image justify
('L', 0)),
'IO':AxisDef(0, 0), # image offset
'IP':True, # image polarity
'IR':0} # image rotation
# simulate a photo plotter
self.status = {'x':0,
'y':0,
'draw':'OFF',
'interpolation':'LINEAR',
'aperture':None,
'outline_fill':False,
'multi_quadrant':False,
'units':None,
'incremental_coords':None}
@staticmethod
def auto_detect(filename):
""" Return our confidence that the given file is an gerber file """
f = open(filename, 'r')
data = f.read()
confidence = 0
if 'D01*' in data:
confidence += 0.2
if 'D02*' in data:
confidence += 0.2
if 'D03*' in data:
confidence += 0.2
if 'M02*' in data:
confidence += 0.4
return confidence
def parse(self, infile='.'):
""" Parse tokens from gerber files into a design. """
zip_ = infile.endswith('zip')
openarchive = zip_ and ZipFile or TarFile.open
archive = batch_member = None
try:
# define multiple layers from folder
if LAYERS_CFG in infile:
archive = None
cfg_name = infile
cfg = open(cfg_name, 'r')
# define multiple layers from archive
else:
archive = openarchive(infile)
batch = zip_ and archive.namelist or archive.getnames
batch_member = zip_ and archive.open or archive.extractfile
cfg_name = [n for n in batch() if LAYERS_CFG in n][0]
cfg = batch_member(cfg_name)
# define single layer from single gerber file
except ReadError:
name, ext = path.split(infile)[1].rsplit('.', 1)
layer_defs = [LayerDef(ext.lower() == 'ger' and name or ext,
'unknown',
infile)]
self._gen_layers(layer_defs, None, None)
# tidy up batch specs
else:
layer_defs = [LayerDef(rec[0],
rec[1],
path.join(path.split(cfg_name)[0], rec[2]))
for rec in
csv.reader(cfg, skipinitialspace=True)]
cfg.close()
self._gen_layers(layer_defs, archive, batch_member)
# tidy up archive
finally:
if archive:
archive.close()
# compile design
if DEBUG:
self._debug_stdout()
self.layout.units = (self.params['MO'] == 'IN' and 'inch' or 'mm')
design = Design()
design.layout = self.layout
return design
# primary parser support methods
def _gen_layers(self, layer_defs, archive, batch_member):
""" Parse gerbers into a PCB layers. """
for layer_def in layer_defs:
self.layer_buff = Layer(layer_def.name, layer_def.type)
layer_file = (archive and
batch_member(layer_def.filename) or
open(layer_def.filename, 'r'))
for block in self._tokenize(layer_file):
if isinstance(block, MacroDef):
effect = self._build_macro(block)
elif isinstance(block, Funct):
effect = self._do_funct(block)
else:
effect = self._move(block)
self.status.update(effect)
self.layout.layers.append(self.layer_buff)
def _build_macro(self, block):
""" Build a macro out of component shape defs. """
primitives = []
for p_def in block.primitive_defs:
type_, mods = (p_def[0], [float(i) for i in p_def[1:]])
is_additive = type_ in ('moire', 'thermal') or int(mods[0])
rotation = type_ not in ('circle', 'moire',
'thermal') and mods[-1]/180
shape, rotation = self._gen_shape(type_, mods, rotation)
primitives.append(Primitive(is_additive, rotation, shape))
# generate and stow the macro
self.layer_buff.macros[block.name] = Macro(block.name, primitives)
return {}
def _do_funct(self, block):
""" Set drawing modes, fill terminators. """
code = int(block.code)
if 'D' in block.type_:
if code < 10:
effect = {'draw':D_MAP[code]}
# flash current pos/aperture
if 'X' in block.type_:
apertures = self.layer_buff.apertures
aperture = apertures[self.status['aperture']]
pos = Point(self.status['x'], self.status['y'])
shape_inst = ShapeInstance(pos, aperture)
self.img_buff.shape_instances.append(shape_inst)
# terminate fill mid mode
if (self.status['outline_fill'] and
code == 2 and self.fill_buff):
self.img_buff.fills.append(self._check_fill())
else:
effect = {'aperture':block.code}
else:
effect = G_MAP[code]
if code == 37:
# terminate fill if D02 was not specified
if self.fill_buff:
self.img_buff.fills.append(self._check_fill())
return effect
def _move(self, block):
""" Draw a shape, or a segment of a trace or fill. """
start = tuple([self.status[k] for k in ('x', 'y')])
end = self._target_pos(block)
ends = (Point(start), Point(end))
apertures = self.layer_buff.apertures
if self.status['draw'] == 'ON':
# generate segment
if self.status['interpolation'] == 'LINEAR':
seg = Line(start, end)
else:
ctr_offset = block[2:]
seg = self._draw_arc(ends, ctr_offset)
# append segment to fill
if self.status['outline_fill']:
self.fill_buff.append(seg)
else:
aperture = apertures[self.status['aperture']]
if isinstance(aperture.shape, Rectangle):
# construct a smear
self._check_smear(seg, aperture.shape)
self.img_buff.smears.append(Smear(seg, aperture.shape))
else:
wid = aperture.shape.radius * 2
tr_ind = self.img_buff.get_trace(wid, ends)
if tr_ind is None:
# construct a trace
self.img_buff.traces.append(Trace(wid, [seg]))
else:
# append segment to existing trace
self.img_buff.traces[tr_ind].segments.append(seg)
elif self.status['draw'] == 'FLASH':
aperture = apertures[self.status['aperture']]
shape_inst = ShapeInstance(ends[1], aperture)
self.img_buff.shape_instances.append(shape_inst)
return {'x':end[0], 'y':end[1]}
# coordinate interpretation
def _target_pos(self, block):
""" Interpret coordinates in a data block. """
coord = {'x':block.x, 'y':block.y}
for k in coord:
if self.params['FS'].incremental_coords:
if coord[k] is None:
coord[k] = 0
coord[k] = self.status[k] + getattr(block, k)
else:
if coord[k] is None:
coord[k] = self.status[k]
return (coord['x'], coord['y'])
# geometry
def _gen_shape(self, type_, mods, rotation):
""" Create a primitive shape component for a macro. """
if type_ == 'circle':
shape = Circle(x=mods[2],
y=mods[3],
radius=mods[1]/2)
elif type_ == 'vector':
shape, rotation = self._vector_to_rect(mods,
rotation)
elif type_ == 'line':
shape = Rectangle(x=mods[3] - mods[1]/2,
y=mods[4] + mods[2]/2,
width=mods[1],
height=mods[2])
elif type_ == 'rectangle':
shape = Rectangle(x=mods[3],
y=mods[4] + mods[2],
width=mods[1],
height=mods[2])
elif type_ == 'outline':
points = [Point(mods[i], mods[i + 1])
for i in range(2, len(mods[:-1]), 2)]
shape = Polygon(points)
elif type_ == 'polygon':
shape = RegularPolygon(x=mods[2],
y=mods[3],
outer=mods[4],
vertices=mods[1])
elif type_ == 'moire':
mods[8] = 2 - mods[8]/180
shape = Moire(*mods[0:9])
elif type_ == 'thermal':
mods[5] = 2 - mods[5]/180
shape = Thermal(*mods[0:6])
return (shape, rotation)
def _vector_to_rect(self, mods, rotation):
"""
Convert a vector into a Rectangle.
Strategy
========
If vect is not horizontal:
- rotate about the origin until horizontal
- define it as a normal rectangle
- incorporate rotated angle into explicit rotation
"""
start, end = (mods[2:4], mods[4:6])
start_radius = sqrt(start[0]**2 + start[1]**2)
end_radius = sqrt(end[0]**2 + end[1]**2)
# Reverse the vector if its endpoint is closer
# to the origin than its start point (avoids
# mucking about with signage later).
if start_radius > end_radius:
end, start = (mods[2:4], mods[4:6])
radius = end_radius
else:
radius = start_radius
# Calc the angle of the vector with respect to
# the x axis.
x, y = start
adj = end[0] - x
opp = end[1] - y
hyp = sqrt(adj**2 + opp**2)
theta = acos(adj/hyp)/pi
if opp > 0:
theta = 2 - theta
# Represent vector angle as a delta.
d_theta = 2 - theta
# Calc the angle of the start point of the
# flattened vector.
theta = acos(x/radius)/pi
if y > 0:
theta = 2 - theta
theta += d_theta
# Redefine x and y at center of the rect's left
# side.
y = sin((2 - theta) * pi) * radius
x = cos((2 - theta) * pi) * radius
# Calc the composite rotation angle.
rotation = (rotation + theta) % 2
return (Rectangle(x=x,
y=y + mods[1]/2,
width=hyp,
height=mods[1]),
rotation)
def _draw_arc(self, end_pts, center_offset):
""" Convert arc path into shape. """
start, end = end_pts
offset = {'i':center_offset[0], 'j':center_offset[1]}
for k in offset:
if offset[k] is None:
offset[k] = 0
center, radius = self._get_ctr_and_radius(end_pts, offset)
start_angle = self._get_angle(center, start)
end_angle = self._get_angle(center, end)
self._check_mq(start_angle, end_angle)
clockwise = 'ANTI' not in self.status['interpolation']
return Arc(center.x, center.y,
clockwise and start_angle or end_angle,
clockwise and end_angle or start_angle,
radius)
def _get_ctr_and_radius(self, end_pts, offset):
""" Apply gerber circular interpolation logic. """
start, end = end_pts
radius = sqrt(offset['i']**2 + offset['j']**2)
center = Point(x=start.x + offset['i'],
y=start.y + offset['j'])
# In single-quadrant mode, gerber requires implicit
# determination of offset direction, so we find the
# center through trial and error.
if not self.status['multi_quadrant']:
if not snap(center.dist(end), radius):
center = Point(x=start.x - offset['i'],
y=start.y - offset['j'])
if not snap(center.dist(end), radius):
center = Point(x=start.x + offset['i'],
y=start.y - offset['j'])
if not snap(center.dist(end), radius):
center = Point(x=start.x - offset['i'],
y=start.y + offset['j'])
if not snap(center.dist(end), radius):
raise ImpossibleGeometry
return (center, radius)
def _get_angle(self, arc_center, point):
"""
Convert 2 points to an angle in radians/pi.
0 radians = 3 o'clock, in accordance with
the way arc angles are defined in shape.py
"""
adj = float(point.x - arc_center.x)
opp = point.y - arc_center.y
hyp = arc_center.dist(point)
angle = acos(adj/hyp)/pi
if opp > 0:
angle = 2 - angle
return angle
# tokenizer
def _tokenize(self, layer_file):
""" Split gerber file into pythonic tokens. """
content = layer_file.read()
layer_file.close()
param_block = eof = False
pos = 0
match = TOK_RE.match(content)
while pos < len(content):
if match is None:
pos += 1
else:
typ = match.lastgroup
tok = match.group(typ)[:-1]
try:
if typ == 'MACRO':
yield self._parse_macro(tok)
elif typ == 'PARAM_DELIM':
param_block = not param_block
# params
elif len(typ) == 2:
self._check_pb(param_block, tok)
self.params.update(self._parse_param(tok))
# data blocks
elif typ not in IGNORE:
self._check_pb(param_block, tok, False)
if typ == 'EOF':
self._check_eof(content[match.end():])
eof = True
else:
self._check_typ(typ, tok)
# explode self-referential data blocks
blocks = self._parse_data_block(tok)
for block in blocks:
yield block
except Unparsable:
raise
pos = match.end()
match = TOK_RE.match(content, pos)
self._check_eof(eof=eof)
self.layer_buff.images.append(self.img_buff)
# tokenizer support - macros
def _parse_macro(self, tok):
""" Define a macro, with its component shapes. """
parts = tok.split('*')
name = parts[0][3:]
prims = [part.strip().split(',') for part in parts[1:-1]]
prim_defs = tuple([(PRIMITIVES[int(m[0])],) + tuple(m[1:])
for m in prims])
return MacroDef(name, prim_defs)
# tokenizer support - params
def _parse_param(self, tok):
""" Convert a param specifier into pythonic data. """
name, tok = (tok[:2], tok[2:])
if name == 'FS':
tup = self._extract_fs(tok)
elif name == 'AD':
self._extract_ad(tok)
return {}
elif name in AXIS_PARAMS:
tup = self._extract_ap(name, tok)
elif name in LAYER_PARAMS:
self._extract_lp(name, tok)
return {}
else:
tup = tok
return {name:tup}
def _extract_fs(self, tok):
""" Extract format spec param parts into tuple. """
tok, m_max = self._pop_val('M', tok)
tok, d_max = self._pop_val('D', tok)
tok, y = self._pop_val('Y', tok, coerce_=False)
y = CoordFmt(int(y[0]), int(y[1]))
tok, x = self._pop_val('X', tok, coerce_=False)
x = CoordFmt(int(x[0]), int(x[1]))
tok, g_max = self._pop_val('G', tok)
tok, n_max = self._pop_val('N', tok)
inc_coords = (tok[1] == 'I')
z_omit = tok[0]
return FormatSpec(z_omit, inc_coords, n_max, g_max,
x, y, d_max, m_max)
def _extract_ad(self, tok):
""" Extract aperture definition into shapes dict. """
tok = ',' in tok and tok or tok + ','
code_end = tok[3] in DIGITS and 4 or 3
code = tok[1:code_end]
type_, mods = tok[code_end:].split(',')
if mods:
mods = [float(m) for m in mods.split('X')]
# An aperture can use any of the 4 standard types,
# (with or without a central hole), or a previously
# defined macro.
if type_ == 'C':
shape = Circle(0, 0, mods[0]/2)
hole_defs = len(mods) > 1 and mods[1:]
elif type_ == 'R':
shape = Rectangle(-mods[0]/2, mods[1]/2,
mods[0], mods[1])
hole_defs = len(mods) > 2 and mods[2:]
elif type_ == 'O':
shape = Obround(0, 0, mods[0], mods[1])
hole_defs = len(mods) > 2 and mods[2:]
elif type_ == 'P':
if len(mods) < 3:
mods.append(0)
shape = RegularPolygon(0, 0, mods[0], mods[1], mods[2])
hole_defs = len(mods) > 3 and mods[3:]
else:
shape = type_
hole_defs = None
hole = hole_defs and (len(hole_defs) > 1 and
Rectangle(-hole_defs[0]/2,
hole_defs[1]/2,
hole_defs[0],
hole_defs[1]) or
Circle(0, 0, hole_defs[0]/2))
self.layer_buff.apertures.update({code:Aperture(code, shape, hole)})
def _extract_ap(self, name, tok):
""" Extract axis-defining param into tuple. """
if name in ('AS', 'IJ'):
coerce_ = False
else:
coerce_ = name == 'MI' and 'int' or 'float'
tok, b_val = self._pop_val('B', tok, coerce_=coerce_)
tok, a_val = self._pop_val('A', tok, coerce_=coerce_)
if name == 'IJ':
tup = AxisDef(self._parse_justify(a_val),
self._parse_justify(b_val))
else:
tup = AxisDef(a_val, b_val)
return tup
def _extract_lp(self, name, tok):
""" Extract "layer param" and reset image layer. """
if self.img_buff.not_empty():
self.layer_buff.images.append(self.img_buff)
self.img_buff = Image('', self.img_buff.is_additive)
self.status.update({'x':0,
'y':0,
'draw':'OFF',
'interpolation':'LINEAR',
'aperture':None,
'outline_fill':False,
'multi_quadrant':False,
'units':None,
'incremental_coords':None})
if name == 'LN':
self.img_buff.name = tok
elif name == 'LP':
self.img_buff.is_additive = IMAGE_POLARITIES[tok]
elif name == 'SR':
tok, j = self._pop_val('J', tok, coerce_='float')
tok, i = self._pop_val('I', tok, coerce_='float')
tok, y = self._pop_val('Y', tok)
tok, x = self._pop_val('X', tok)
self.img_buff.x_repeats = x
self.img_buff.x_step = i
self.img_buff.y_repeats = y
self.img_buff.y_step = j
def _parse_justify(self, val):
""" Make a tuple for each axis (special case). """
if len(val) > 1 or val not in 'LC':
ab_tup = ('L', float(val.split('L')[-1]))
else:
ab_tup = (val, None)
return ab_tup
# tokenizer support - funct/coord
def _parse_data_block(self, tok):
""" Convert a non-param into pythonic data. """
if 'G' in tok:
g_code = tok[1:3]
tok = tok[3:]
if int(g_code) in G_MAP:
yield Funct('G', g_code)
tok, d_code = self._pop_val('D', tok, coerce_=False)
if d_code:
# identify D03 without coord - flash at current pos
type_ = (d_code == '03' and not tok) and 'XD' or 'D'
yield Funct(type_, d_code)
if tok:
yield self._parse_coord(tok)
def _parse_coord(self, tok):
""" Convert a coordinate set into pythonic data. """
self._check_fs()
tok, j = self._pop_val('J', tok, format_=True)
tok, i = self._pop_val('I', tok, format_=True)
tok, y = self._pop_val('Y', tok, format_=True)
tok, x = self._pop_val('X', tok, format_=True)
result = Coord(x, y, i, j)
if tok:
raise CoordMalformed('%s remainder=%s' % (result, tok))
return result
def _format_dec(self, num_str, axis):
"""
Interpret a coordinate value using format spec.
Params: num_str (the string representation of a number
portended by format spec)
axis (X or Y - not to be confused with A/B)
Returns: float
"""
f_spec = self.params['FS']
sign_wid = num_str[0] in ('-', '+') and 1 or 0
int_wid = sign_wid + f_spec[axis].int
wid = int_wid + f_spec[axis].dec
# pad coordinate to specified width
if f_spec.zero_omission == 'L':
num_str = num_str.zfill(wid)
elif f_spec.zero_omission == 'T':
num_str = num_str.rjust(wid, '0')
if len(num_str) != wid:
raise CoordMalformed('num_str: %s wid: %s' % (num_str, wid))
# insert decimal point
num_str = '%s.%s' % (num_str[:int_wid], num_str[int_wid:])
return float(num_str)
# general support methods
def _pop_val(self, key, tok, format_=False, coerce_='int'):
""" Pop a labelled value from the end of a token. """
val = None
if key in tok:
tok, num_str = tok.split(key)
if num_str:
if format_:
if key in ('X', 'I'):
val = self._format_dec(num_str, 4)
else:
val = self._format_dec(num_str, 5)
else:
val = coerce_ and (coerce_ == 'float' and
float(num_str) or
int(num_str)) or num_str
return (tok, val)
def _check_fill(self):
""" Check that a fill is closed. """
fill = self.fill_buff
if len(fill) >= 2:
segs = (fill[0], fill[1], fill[-2], fill[-1])
ends = [isinstance(s, Arc) and list(s.ends()) or [s.p1, s.p2]
for s in segs]
if len(fill) > 2:
# If first or last seg is an arc that was defined
# in anticlockwise mode, we need to reverse it.
if ends[0][0] in ends[1]:
ends[0].reverse()
if ends[-1][1] in ends[-2]:
ends[-1].reverse()
if not ends[-1][1] == ends[0][0]:
raise OpenFillBoundary('%s != %s' %
(ends[-1][1], ends[0][0]))
else:
for end in ends[-1]:
if end not in end[0]:
raise OpenFillBoundary('%s != %s' %
(ends[-1][1], ends[0][0]))
else:
start, end = fill[0].ends()
if not start == end:
raise OpenFillBoundary('%s != %s' % (start, end))
self.fill_buff = []
return Fill(fill)
def _check_smear(self, seg, shape):
""" Enforce linear interpolation constraint. """
if not isinstance(seg, Line):
raise IncompatibleAperture('%s cannot draw arc %s'
% (shape, seg))
def _check_mq(self, start_angle, end_angle):
""" Enforce single quadrant arc length restriction. """
if not self.status['multi_quadrant']:
if abs(end_angle - start_angle) > 0.5:
raise QuadrantViolation('Arc(%s to %s) > 0.5 rad/pi'
% (start_angle, end_angle))
def _check_pb(self, param_block, tok, should_be=True):
""" Ensure we are parsing an appropriate block. """
if should_be and not param_block:
raise DelimiterMissing
if param_block and not should_be:
raise ParamContainsBadData(tok)
def _check_fs(self):
""" Ensure coordinate is able to be interpreted. """
if not self.params['FS']:
raise CoordPrecedesFormatSpec
def _check_eof(self, trailing_fragment=None, eof=False):
""" Ensure file is terminated correctly. """
if not (trailing_fragment or eof):
raise FileNotTerminated
elif (not eof) and trailing_fragment.strip():
raise DataAfterEOF(trailing_fragment)
def _check_typ(self, typ, tok):
""" Ensure data block is understood by the parser. """
if typ == 'UNKNOWN':
raise UnintelligibleDataBlock(tok)
def _debug_stdout(self):
""" Dump what we know. """
for layer in self.layout.layers:
print '-- %s (%s) --' % (layer.name, layer.type)
for j in layer.apertures:
print '-- D%s --' % j
print layer.apertures[j].json()
for k in layer.macros:
print '-- %s --' % k
print layer.macros[k].json()
for image in layer.images:
print '-- %s (%s) --' % (image.name,
image.is_additive and
'additive' or 'subtractive')
print image.json()
raise Unparsable('deliberate error')
