def intersectingNodes(node: CuraSceneNode) -> List[CuraSceneNode]:
'''
Returns a list of CuraSceneNodes which intersect the node in question, depending on if the
node is a printable node, or a modifier mesh
'''
intersecting_nodes = []
if node in getPrintableNodes():
for n in getModifierMeshes():
collision = node.collidesWithBbox(n.getBoundingBox()) or n.collidesWithBbox(node.getBoundingBox())
if collision and n not in node.getChildren():
intersecting_nodes.append(n)
elif node in getModifierMeshes():
for n in getPrintableNodes():
collision = node.collidesWithBbox(n.getBoundingBox()) or n.collidesWithBbox(node.getBoundingBox())
if collision:
intersecting_nodes.append(n)
return intersecting_nodes
def _convertSavitarNodeToUMNode(self, savitar_node):
self._object_count += 1
node_name = "Object %s" % self._object_count
active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate
um_node = CuraSceneNode() # This adds a SettingOverrideDecorator
um_node.addDecorator(BuildPlateDecorator(active_build_plate))
um_node.setName(node_name)
transformation = self._createMatrixFromTransformationString(savitar_node.getTransformation())
um_node.setTransformation(transformation)
mesh_builder = MeshBuilder()
data = numpy.fromstring(savitar_node.getMeshData().getFlatVerticesAsBytes(), dtype=numpy.float32)
vertices = numpy.resize(data, (int(data.size / 3), 3))
mesh_builder.setVertices(vertices)
mesh_builder.calculateNormals(fast=True)
mesh_data = mesh_builder.build()
if len(mesh_data.getVertices()):
um_node.setMeshData(mesh_data)
for child in savitar_node.getChildren():
child_node = self._convertSavitarNodeToUMNode(child)
if child_node:
um_node.addChild(child_node)
if um_node.getMeshData() is None and len(um_node.getChildren()) == 0:
return None
settings = savitar_node.getSettings()
# Add the setting override decorator, so we can add settings to this node.
if settings:
global_container_stack = Application.getInstance().getGlobalContainerStack()
# Ensure the correct next container for the SettingOverride decorator is set.
if global_container_stack:
default_stack = ExtruderManager.getInstance().getExtruderStack(0)
if default_stack:
um_node.callDecoration("setActiveExtruder", default_stack.getId())
# Get the definition & set it
definition_id = getMachineDefinitionIDForQualitySearch(global_container_stack.definition)
um_node.callDecoration("getStack").getTop().setDefinition(definition_id)
setting_container = um_node.callDecoration("getStack").getTop()
for key in settings:
setting_value = settings[key]
# Extruder_nr is a special case.
if key == "extruder_nr":
extruder_stack = ExtruderManager.getInstance().getExtruderStack(int(setting_value))
if extruder_stack:
um_node.callDecoration("setActiveExtruder", extruder_stack.getId())
else:
Logger.log("w", "Unable to find extruder in position %s", setting_value)
continue
setting_container.setProperty(key, "value", setting_value)
if len(um_node.getChildren()) > 0 and um_node.getMeshData() is None:
group_decorator = GroupDecorator()
um_node.addDecorator(group_decorator)
um_node.setSelectable(True)
if um_node.getMeshData():
# Assuming that all nodes with mesh data are printable objects
# affects (auto) slicing
sliceable_decorator = SliceableObjectDecorator()
um_node.addDecorator(sliceable_decorator)
return um_node
def _convertSavitarNodeToUMNode(
self,
savitar_node: Savitar.SceneNode,
file_name: str = "") -> Optional[SceneNode]:
"""Convenience function that converts a SceneNode object (as obtained from libSavitar) to a scene node.
:returns: Scene node.
"""
try:
node_name = savitar_node.getName()
node_id = savitar_node.getId()
except AttributeError:
Logger.log(
"e",
"Outdated version of libSavitar detected! Please update to the newest version!"
)
node_name = ""
node_id = ""
if node_name == "":
if file_name != "":
node_name = os.path.basename(file_name)
else:
node_name = "Object {}".format(node_id)
active_build_plate = CuraApplication.getInstance(
).getMultiBuildPlateModel().activeBuildPlate
um_node = CuraSceneNode() # This adds a SettingOverrideDecorator
um_node.addDecorator(BuildPlateDecorator(active_build_plate))
try:
um_node.addDecorator(ConvexHullDecorator())
except:
pass
um_node.setName(node_name)
um_node.setId(node_id)
transformation = self._createMatrixFromTransformationString(
savitar_node.getTransformation())
um_node.setTransformation(transformation)
mesh_builder = MeshBuilder()
data = numpy.fromstring(
savitar_node.getMeshData().getFlatVerticesAsBytes(),
dtype=numpy.float32)
vertices = numpy.resize(data, (int(data.size / 3), 3))
mesh_builder.setVertices(vertices)
mesh_builder.calculateNormals(fast=True)
if file_name:
# The filename is used to give the user the option to reload the file if it is changed on disk
# It is only set for the root node of the 3mf file
mesh_builder.setFileName(file_name)
mesh_data = mesh_builder.build()
if len(mesh_data.getVertices()):
um_node.setMeshData(mesh_data)
for child in savitar_node.getChildren():
child_node = self._convertSavitarNodeToUMNode(child)
if child_node:
um_node.addChild(child_node)
if um_node.getMeshData() is None and len(um_node.getChildren()) == 0:
return None
settings = savitar_node.getSettings()
# Add the setting override decorator, so we can add settings to this node.
if settings:
global_container_stack = CuraApplication.getInstance(
).getGlobalContainerStack()
# Ensure the correct next container for the SettingOverride decorator is set.
if global_container_stack:
default_stack = ExtruderManager.getInstance().getExtruderStack(
0)
if default_stack:
um_node.callDecoration("setActiveExtruder",
default_stack.getId())
# Get the definition & set it
definition_id = ContainerTree.getInstance().machines[
global_container_stack.definition.getId(
)].quality_definition
um_node.callDecoration("getStack").getTop().setDefinition(
definition_id)
setting_container = um_node.callDecoration("getStack").getTop()
known_setting_keys = um_node.callDecoration(
"getStack").getAllKeys()
for key in settings:
setting_value = settings[key].value
# Extruder_nr is a special case.
if key == "extruder_nr":
extruder_stack = ExtruderManager.getInstance(
).getExtruderStack(int(setting_value))
if extruder_stack:
um_node.callDecoration("setActiveExtruder",
extruder_stack.getId())
else:
Logger.log("w",
"Unable to find extruder in position %s",
setting_value)
continue
if key in known_setting_keys:
setting_container.setProperty(key, "value", setting_value)
else:
um_node.metadata[key] = settings[key]
if len(um_node.getChildren()) > 0 and um_node.getMeshData() is None:
if len(um_node.getAllChildren()) == 1:
# We don't want groups of one, so move the node up one "level"
child_node = um_node.getChildren()[0]
parent_transformation = um_node.getLocalTransformation()
child_transformation = child_node.getLocalTransformation()
child_node.setTransformation(
parent_transformation.multiply(child_transformation))
um_node = cast(CuraSceneNode, um_node.getChildren()[0])
else:
group_decorator = GroupDecorator()
um_node.addDecorator(group_decorator)
um_node.setSelectable(True)
if um_node.getMeshData():
# Assuming that all nodes with mesh data are printable objects
# affects (auto) slicing
sliceable_decorator = SliceableObjectDecorator()
um_node.addDecorator(sliceable_decorator)
return um_node
def _convertSavitarNodeToUMNode(self, savitar_node):
self._object_count += 1
node_name = "Object %s" % self._object_count
active_build_plate = Application.getInstance().getMultiBuildPlateModel(
).activeBuildPlate
um_node = CuraSceneNode() # This adds a SettingOverrideDecorator
um_node.addDecorator(BuildPlateDecorator(active_build_plate))
um_node.setName(node_name)
transformation = self._createMatrixFromTransformationString(
savitar_node.getTransformation())
um_node.setTransformation(transformation)
mesh_builder = MeshBuilder()
data = numpy.fromstring(
savitar_node.getMeshData().getFlatVerticesAsBytes(),
dtype=numpy.float32)
vertices = numpy.resize(data, (int(data.size / 3), 3))
mesh_builder.setVertices(vertices)
mesh_builder.calculateNormals(fast=True)
mesh_data = mesh_builder.build()
if len(mesh_data.getVertices()):
um_node.setMeshData(mesh_data)
for child in savitar_node.getChildren():
child_node = self._convertSavitarNodeToUMNode(child)
if child_node:
um_node.addChild(child_node)
if um_node.getMeshData() is None and len(um_node.getChildren()) == 0:
return None
settings = savitar_node.getSettings()
# Add the setting override decorator, so we can add settings to this node.
if settings:
global_container_stack = Application.getInstance(
).getGlobalContainerStack()
# Ensure the correct next container for the SettingOverride decorator is set.
if global_container_stack:
default_stack = ExtruderManager.getInstance().getExtruderStack(
0)
if default_stack:
um_node.callDecoration("setActiveExtruder",
default_stack.getId())
# Get the definition & set it
definition_id = getMachineDefinitionIDForQualitySearch(
global_container_stack.definition)
um_node.callDecoration("getStack").getTop().setDefinition(
definition_id)
setting_container = um_node.callDecoration("getStack").getTop()
for key in settings:
setting_value = settings[key]
# Extruder_nr is a special case.
if key == "extruder_nr":
extruder_stack = ExtruderManager.getInstance(
).getExtruderStack(int(setting_value))
if extruder_stack:
um_node.callDecoration("setActiveExtruder",
extruder_stack.getId())
else:
Logger.log("w",
"Unable to find extruder in position %s",
setting_value)
continue
setting_container.setProperty(key, "value", setting_value)
if len(um_node.getChildren()) > 0 and um_node.getMeshData() is None:
group_decorator = GroupDecorator()
um_node.addDecorator(group_decorator)
um_node.setSelectable(True)
if um_node.getMeshData():
# Assuming that all nodes with mesh data are printable objects
# affects (auto) slicing
sliceable_decorator = SliceableObjectDecorator()
um_node.addDecorator(sliceable_decorator)
return um_node
def _convertSavitarNodeToUMNode(
self,
savitar_node: Savitar.SceneNode,
file_name: str = "") -> Optional[SceneNode]:
node_name = savitar_node.getName()
node_id = savitar_node.getId()
if node_name == "":
if file_name != "":
node_name = os.path.basename(file_name)
else:
node_name = "Object {}".format(node_id)
active_build_plate = CuraApplication.getInstance(
).getMultiBuildPlateModel().activeBuildPlate
um_node = CuraSceneNode() # This adds a SettingOverrideDecorator
um_node.addDecorator(BuildPlateDecorator(active_build_plate))
um_node.setName(node_name)
um_node.setId(node_id)
transformation = self._createMatrixFromTransformationString(
savitar_node.getTransformation())
um_node.setTransformation(transformation)
mesh_builder = MeshBuilder()
data = numpy.fromstring(
savitar_node.getMeshData().getFlatVerticesAsBytes(),
dtype=numpy.float32)
vertices = numpy.resize(data, (int(data.size / 3), 3))
mesh_builder.setVertices(vertices)
mesh_builder.calculateNormals(fast=True)
if file_name:
# The filename is used to give the user the option to reload the file if it is changed on disk
# It is only set for the root node of the 3mf file
mesh_builder.setFileName(file_name)
mesh_data = mesh_builder.build()
if len(mesh_data.getVertices()):
um_node.setMeshData(mesh_data)
for child in savitar_node.getChildren():
child_node = self._convertSavitarNodeToUMNode(child)
if child_node:
um_node.addChild(child_node)
if um_node.getMeshData() is None and len(um_node.getChildren()) == 0:
return None
settings = savitar_node.getSettings()
# Add the setting override decorator, so we can add settings to this node.
if settings:
global_container_stack = CuraApplication.getInstance(
).getGlobalContainerStack()
# Ensure the correct next container for the SettingOverride decorator is set.
if global_container_stack:
default_stack = ExtruderManager.getInstance().getExtruderStack(
0)
if default_stack:
um_node.callDecoration("setActiveExtruder",
default_stack.getId())
# Get the definition & set it
definition_id = ContainerTree.getInstance().machines[
global_container_stack.definition.getId(
)].quality_definition
um_node.callDecoration("getStack").getTop().setDefinition(
definition_id)
setting_container = um_node.callDecoration("getStack").getTop()
for key in settings:
setting_value = settings[key]
# Extruder_nr is a special case.
if key == "extruder_nr":
extruder_stack = ExtruderManager.getInstance(
).getExtruderStack(int(setting_value))
if extruder_stack:
um_node.callDecoration("setActiveExtruder",
extruder_stack.getId())
else:
Logger.log("w",
"Unable to find extruder in position %s",
setting_value)
continue
setting_container.setProperty(key, "value", setting_value)
if len(um_node.getChildren()) > 0 and um_node.getMeshData() is None:
group_decorator = GroupDecorator()
um_node.addDecorator(group_decorator)
um_node.setSelectable(True)
if um_node.getMeshData():
# Assuming that all nodes with mesh data are printable objects
# affects (auto) slicing
sliceable_decorator = SliceableObjectDecorator()
um_node.addDecorator(sliceable_decorator)
return um_node
