def test_git_config_fixture():
# in the setup_package we setup a new HOME with custom config
if 'GIT_HOME' not in os.environ:
assert_equal(check_git_configured(), {
'user.name': 'DataLad Tester',
'user.email': '*****@*****.**'
})
else:
# we pick up the ones in the 'GIT_HOME' which might differ
assert_equal(sorted(check_git_configured()),
['user.email', 'user.name'])
def test_git_config_fixture():
# in the setup_package we setup a new HOME with custom config
if 'GIT_HOME' not in os.environ:
assert_equal(
check_git_configured(),
{
'user.name': 'DataLad Tester',
'user.email': '*****@*****.**'
}
)
else:
# we pick up the ones in the 'GIT_HOME' which might differ
assert_equal(sorted(check_git_configured()), ['user.email', 'user.name'])
def test_git_config_warning(path):
with chpwd(path), \
patch.dict('os.environ', {'HOME': path}), \
swallow_logs(new_level=30) as cml:
# no configs in that empty HOME
assert_equal(check_git_configured(), {})
assert_in("configure git first", cml.out)
def test_git_config_warning(path):
with chpwd(path), \
patch.dict('os.environ', {'HOME': path}), \
swallow_logs(new_level=30) as cml:
# no configs in that empty HOME
assert_equal(check_git_configured(), {})
assert_in("configure git first", cml.out)
def test_git_config_fixture():
# in the setup_package we setup a new HOME with custom config
from datalad.support.gitrepo import check_git_configured
assert_equal(
check_git_configured(),
{
'user.name': 'DataLad Tester',
'user.email': '*****@*****.**'
}
)
def setup_package():
import os
# To overcome pybuild overriding HOME but us possibly wanting our
# own HOME where we pre-setup git for testing (name, email)
if 'GIT_HOME' in os.environ:
os.environ['HOME'] = os.environ['GIT_HOME']
# For now we will just verify that it is ready to run the tests
from datalad.support.gitrepo import check_git_configured
check_git_configured()
# To overcome pybuild by default defining http{,s}_proxy we would need
# to define them to e.g. empty value so it wouldn't bother touching them.
# But then haskell libraries do not digest empty value nicely, so we just
# pop them out from the environment
for ev in ('http_proxy', 'https_proxy'):
if ev in os.environ and not (os.environ[ev]):
lgr.debug("Removing %s from the environment since it is empty", ev)
os.environ.pop(ev)
DATALAD_LOG_LEVEL = os.environ.get('DATALAD_LOG_LEVEL', None)
if DATALAD_LOG_LEVEL is None:
# very very silent. Tests introspecting logs should use
# swallow_logs(new_level=...)
_test_states['loglevel'] = lgr.getEffectiveLevel()
lgr.setLevel(100)
# And we should also set it within environ so underlying commands also stay silent
_test_states['DATALAD_LOG_LEVEL'] = DATALAD_LOG_LEVEL
os.environ['DATALAD_LOG_LEVEL'] = '100'
else:
# We are not overriding them, since explicitly were asked to have some log level
_test_states['loglevel'] = None
# Set to non-interactive UI
from datalad.ui import ui
_test_states['ui_backend'] = ui.backend
# obtain() since that one consults for the default value
ui.set_backend(cfg.obtain('datalad.tests.ui.backend'))
def setup_package():
import os
from datalad import consts
_test_states['HOME'] = os.environ.get('HOME', None)
_test_states['DATASETS_TOPURL_ENV'] = os.environ.get(
'DATALAD_DATASETS_TOPURL', None)
_test_states['DATASETS_TOPURL'] = consts.DATASETS_TOPURL
os.environ[
'DATALAD_DATASETS_TOPURL'] = consts.DATASETS_TOPURL = 'http://datasets-tests.datalad.org/'
# To overcome pybuild overriding HOME but us possibly wanting our
# own HOME where we pre-setup git for testing (name, email)
if 'GIT_HOME' in os.environ:
os.environ['HOME'] = os.environ['GIT_HOME']
else:
# we setup our own new HOME, the BEST and HUGE one
from datalad.utils import make_tempfile
from datalad.tests import _TEMP_PATHS_GENERATED
# TODO: split into a function + context manager
with make_tempfile(mkdir=True) as new_home:
os.environ['HOME'] = new_home
if not os.path.exists(new_home):
os.makedirs(new_home)
with open(os.path.join(new_home, '.gitconfig'), 'w') as f:
f.write("""\
[user]
name = DataLad Tester
email = [email protected]
""")
_TEMP_PATHS_GENERATED.append(new_home)
# For now we will just verify that it is ready to run the tests
from datalad.support.gitrepo import check_git_configured
check_git_configured()
# To overcome pybuild by default defining http{,s}_proxy we would need
# to define them to e.g. empty value so it wouldn't bother touching them.
# But then haskell libraries do not digest empty value nicely, so we just
# pop them out from the environment
for ev in ('http_proxy', 'https_proxy'):
if ev in os.environ and not (os.environ[ev]):
lgr.debug("Removing %s from the environment since it is empty", ev)
os.environ.pop(ev)
# During tests we allow for "insecure" access to local file:// and
# http://localhost URLs since all of them either generated as tests
# fixtures or cloned from trusted sources
from datalad.support.annexrepo import AnnexRepo
AnnexRepo._ALLOW_LOCAL_URLS = True
DATALAD_LOG_LEVEL = os.environ.get('DATALAD_LOG_LEVEL', None)
if DATALAD_LOG_LEVEL is None:
# very very silent. Tests introspecting logs should use
# swallow_logs(new_level=...)
_test_states['loglevel'] = lgr.getEffectiveLevel()
lgr.setLevel(100)
# And we should also set it within environ so underlying commands also stay silent
_test_states['DATALAD_LOG_LEVEL'] = DATALAD_LOG_LEVEL
os.environ['DATALAD_LOG_LEVEL'] = '100'
else:
# We are not overriding them, since explicitly were asked to have some log level
_test_states['loglevel'] = None
# Set to non-interactive UI
from datalad.ui import ui
_test_states['ui_backend'] = ui.backend
# obtain() since that one consults for the default value
ui.set_backend(cfg.obtain('datalad.tests.ui.backend'))
def setup_package():
import os
from datalad import consts
_test_states['HOME'] = os.environ.get('HOME', None)
_test_states['DATASETS_TOPURL_ENV'] = os.environ.get('DATALAD_DATASETS_TOPURL', None)
_test_states['DATASETS_TOPURL'] = consts.DATASETS_TOPURL
os.environ['DATALAD_DATASETS_TOPURL'] = consts.DATASETS_TOPURL = 'http://datasets-tests.datalad.org/'
# To overcome pybuild overriding HOME but us possibly wanting our
# own HOME where we pre-setup git for testing (name, email)
if 'GIT_HOME' in os.environ:
os.environ['HOME'] = os.environ['GIT_HOME']
else:
# we setup our own new HOME, the BEST and HUGE one
from datalad.utils import make_tempfile
from datalad.tests import _TEMP_PATHS_GENERATED
# TODO: split into a function + context manager
with make_tempfile(mkdir=True) as new_home:
os.environ['HOME'] = new_home
if not os.path.exists(new_home):
os.makedirs(new_home)
with open(os.path.join(new_home, '.gitconfig'), 'w') as f:
f.write("""\
[user]
name = DataLad Tester
email = [email protected]
""")
_TEMP_PATHS_GENERATED.append(new_home)
# For now we will just verify that it is ready to run the tests
from datalad.support.gitrepo import check_git_configured
check_git_configured()
# To overcome pybuild by default defining http{,s}_proxy we would need
# to define them to e.g. empty value so it wouldn't bother touching them.
# But then haskell libraries do not digest empty value nicely, so we just
# pop them out from the environment
for ev in ('http_proxy', 'https_proxy'):
if ev in os.environ and not (os.environ[ev]):
lgr.debug("Removing %s from the environment since it is empty", ev)
os.environ.pop(ev)
# During tests we allow for "insecure" access to local file:// and
# http://localhost URLs since all of them either generated as tests
# fixtures or cloned from trusted sources
from datalad.support.annexrepo import AnnexRepo
AnnexRepo._ALLOW_LOCAL_URLS = True
DATALAD_LOG_LEVEL = os.environ.get('DATALAD_LOG_LEVEL', None)
if DATALAD_LOG_LEVEL is None:
# very very silent. Tests introspecting logs should use
# swallow_logs(new_level=...)
_test_states['loglevel'] = lgr.getEffectiveLevel()
lgr.setLevel(100)
# And we should also set it within environ so underlying commands also stay silent
_test_states['DATALAD_LOG_LEVEL'] = DATALAD_LOG_LEVEL
os.environ['DATALAD_LOG_LEVEL'] = '100'
else:
# We are not overriding them, since explicitly were asked to have some log level
_test_states['loglevel'] = None
# Set to non-interactive UI
from datalad.ui import ui
_test_states['ui_backend'] = ui.backend
# obtain() since that one consults for the default value
ui.set_backend(cfg.obtain('datalad.tests.ui.backend'))
