def __init__(self):
self.projectFile = ""
self.buildDir = "mdBuild"
self.downloadDir = "mdDownload"
self.logDir = "mdLogFiles"
self.restart = False
self.continueBuilding = False
self.statusLogPath = ""
self.profileMode = False
self.cleanMode = False
self.importMode = False
self.cleanMixDown = True
self.verbose = False
self.logger = "file"
self.targetsToBuild = []
self.targetsToImport = []
self.interactive = False
self.prefixDefined = False
self.skipSteps = ""
self.threadCount = 1
self.overrideFile = ""
self.overrideGroupNames = []
self.overrideGroup = None
self.overrideSearchPath = []
self.defines = defines.Defines()
# Note: Use this only to store the command line defines then it gets combined into self.defines (use self.defines)
self.commandLineDefines = defines.Defines()
defines.setPrefixDefines(self.defines, '/usr/local')
def __init__(self):
self.projectFile = ""
self.buildDir = "mdBuild"
self.downloadDir = "mdDownload"
self.logDir = "mdLogFiles"
self.restart = False
self.continueBuilding = False
self.statusLogPath = ""
self.profileMode = False
self.cleanMode = False
self.importMode = False
self.cleanMixDown = True
self.verbose = False
self.logger = "file"
self.targetsToBuild = []
self.targetsToImport = []
self.interactive = False
self.prefixDefined = False
self.skipSteps = ""
self.threadCount = 1
self.overrideFile = ""
self.overrideGroupNames = []
self.overrideGroup = None
self.overrideSearchPath = []
self.defines = defines.Defines()
# Note: Use this only to store the command line defines then it gets combined into self.defines (use self.defines)
self.commandLineDefines = defines.Defines()
defines.setPrefixDefines(self.defines, '/usr/local')
def processCommandline(self, commandline=[]):
if len(commandline) < 2:
self.printUsage()
return False
#Find mode
for arg in commandline[1:]: #skip script name
loweredArg = arg.lower()
if loweredArg == "--import":
self.importMode = True
elif loweredArg == "--clean":
self.cleanMode = True
self.cleanMixDown = False
elif loweredArg == "--profile":
self.profileMode = True
if (self.cleanMode and (self.profileMode or self.importMode)) or\
(self.profileMode and (self.importMode or self.cleanMode)):
logger.writeError("MixDown cannot be in both two command-line modes at the same time. Run 'MixDown --help' for instructions.")
return False
if self.profileMode:
return self.__processProfileCommandline(commandline)
if self.importMode:
return self.__processImportCommandline(commandline)
for currArg in commandline[1:]: #skip script name
#Handle all options that don't follow -<letter><option>
if currArg.lower() in ("/help", "/h", "-help", "--help", "-h"):
self.printUsage()
return False
elif os.path.splitext(currArg)[1] == ".md":
if not os.path.isfile(currArg):
logger.writeError("Project file " + currArg + " does not exist")
return False
else:
self.projectFile = currArg
continue
elif currArg.lower() == "--clean":
continue
elif currArg.lower().startswith("--pythonpath="):
sys.path.append(os.path.abspath(currArg[13:]))
continue
#Handle all options that follow -<letter><option>
currFlag = currArg[:2].lower()
currValue = currArg[2:]
if currFlag in ("-i"):
logger.writeError("Command-line option is not allowed in build or clean mode: " + currArg)
return False
elif currFlag == "-p":
if not validateOptionPair(currFlag, currValue):
return False
defines.setPrefixDefines(self.defines, os.path.abspath(currValue))
self.prefixDefined = True
elif currFlag == "-t":
if not validateOptionPair(currFlag, currValue):
return False
try:
count = int(currValue)
except ValueError:
count = 0
if count < 1:
logger.writeError("Positive numeric value needed " + definePair)
return False
self.threadCount = count
elif currFlag == "-j":
if not validateOptionPair(currFlag, currValue):
return False
try:
count = int(currValue)
except ValueError:
count = 0
if count < 1:
logger.writeError("Positive numeric value needed " + definePair)
return False
#Add "-j<jobSlots>" only if user defines -j on command-line
defines.setJobSlotsDefines(self.defines, currValue)
elif currFlag == "-l":
if not validateOptionPair(currFlag, currValue):
return False
self.logger = str.lower(currValue)
elif currFlag == "-r":
if not validateOption(currFlag, currValue):
return False
self.restart = True
elif currFlag == "-c":
if not validateOption(currFlag, currValue):
return False
self.continueBuilding = True
elif currFlag == "-b":
if not validateOptionPair(currFlag, currValue):
return False
self.buildDir = currValue
elif currFlag == "-w":
if not validateOptionPair(currFlag, currValue):
return False
self.downloadDir = currValue
elif currFlag == "-f":
if not validateOptionPair(currFlag, currValue):
return False
self.logDir = currValue
elif currFlag == "-k":
if not validateOption(currFlag, currValue):
return False
if self.cleanMode:
logger.writeError("Command-line arguments '--clean' and '-k' cannot both be used at the same time")
return False
self.cleanMixDown = False
elif currFlag == "-v":
if not validateOption(currFlag, currValue):
return False
self.verbose = True
elif currFlag == "-s":
if not validateOptionPair(currFlag, currValue):
return False
self.skipSteps = currValue
elif currFlag == "-o":
if not validateOptionPair(currFlag, currValue):
return False
self.overrideFile = currValue
elif currFlag == "-d":
if not validateOptionPair(currFlag, currValue):
return False
for definePair in currValue.split(","):
splitPair = definePair.split("=")
if len(splitPair) != 2:
logger.writeError("Invalid define pair given, " + definePair)
return False
if splitPair[0].lower() in self.commandLineDefines:
logger.writeError("Define pair already given, " + definePair)
return False
self.commandLineDefines[splitPair[0]] = splitPair[1]
elif currFlag == "-n":
if not validateOptionPair(currFlag, currValue):
return False
names = currValue.split(",")
if len(names) == 0:
logger.writeError("Build target names command-line option used but no names specified.")
return False
for name in names:
currName = name.lower().strip()
if currName == "":
logger.writeError("Empty build target name given on command-line (option '-n')")
return False
self.targetsToBuild.append(currName)
elif currFlag == "-g":
if not validateOptionPair(currFlag, currValue):
return False
names = currValue.split(",")
if len(names) == 0:
logger.writeError("Override group command-line option used but no names specified.")
return False
for name in names:
currName = name.lower().strip()
if currName == "":
logger.writeError("Empty override group name given on command-line (option '-g')")
return False
self.overrideGroupNames.append(currName)
else:
logger.writeError("Command-line argument '" + currArg + "' not understood")
return False
return True
def processCommandline(self, commandline=[]):
if len(commandline) < 2:
self.printUsage()
return False
#Find mode
for arg in commandline[1:]: #skip script name
loweredArg = arg.lower()
if loweredArg == "--import":
self.importMode = True
elif loweredArg == "--clean":
self.cleanMode = True
self.cleanMixDown = False
elif loweredArg == "--profile":
self.profileMode = True
if (self.cleanMode and (self.profileMode or self.importMode)) or\
(self.profileMode and (self.importMode or self.cleanMode)):
logger.writeError(
"MixDown cannot be in both two command-line modes at the same time. Run 'MixDown --help' for instructions."
)
return False
if self.profileMode:
return self.__processProfileCommandline(commandline)
if self.importMode:
return self.__processImportCommandline(commandline)
for currArg in commandline[1:]: #skip script name
#Handle all options that don't follow -<letter><option>
if currArg.lower() in ("/help", "/h", "-help", "--help", "-h"):
self.printUsage()
return False
elif os.path.splitext(currArg)[1] == ".md":
if not os.path.isfile(currArg):
logger.writeError("Project file " + currArg +
" does not exist")
return False
else:
self.projectFile = currArg
continue
elif currArg.lower() == "--clean":
continue
elif currArg.lower().startswith("--pythonpath="):
sys.path.append(os.path.abspath(currArg[13:]))
continue
#Handle all options that follow -<letter><option>
currFlag = currArg[:2].lower()
currValue = currArg[2:]
if currFlag in ("-i"):
logger.writeError(
"Command-line option is not allowed in build or clean mode: "
+ currArg)
return False
elif currFlag == "-p":
if not validateOptionPair(currFlag, currValue):
return False
defines.setPrefixDefines(self.defines,
os.path.abspath(currValue))
self.prefixDefined = True
elif currFlag == "-t":
if not validateOptionPair(currFlag, currValue):
return False
try:
count = int(currValue)
except ValueError:
count = 0
if count < 1:
logger.writeError("Positive numeric value needed " +
definePair)
return False
self.threadCount = count
elif currFlag == "-j":
if not validateOptionPair(currFlag, currValue):
return False
try:
count = int(currValue)
except ValueError:
count = 0
if count < 1:
logger.writeError("Positive numeric value needed " +
definePair)
return False
#Add "-j<jobSlots>" only if user defines -j on command-line
defines.setJobSlotsDefines(self.defines, currValue)
elif currFlag == "-l":
if not validateOptionPair(currFlag, currValue):
return False
self.logger = str.lower(currValue)
elif currFlag == "-r":
if not validateOption(currFlag, currValue):
return False
self.restart = True
elif currFlag == "-c":
if not validateOption(currFlag, currValue):
return False
self.continueBuilding = True
elif currFlag == "-b":
if not validateOptionPair(currFlag, currValue):
return False
self.buildDir = currValue
elif currFlag == "-w":
if not validateOptionPair(currFlag, currValue):
return False
self.downloadDir = currValue
elif currFlag == "-f":
if not validateOptionPair(currFlag, currValue):
return False
self.logDir = currValue
elif currFlag == "-k":
if not validateOption(currFlag, currValue):
return False
if self.cleanMode:
logger.writeError(
"Command-line arguments '--clean' and '-k' cannot both be used at the same time"
)
return False
self.cleanMixDown = False
elif currFlag == "-v":
if not validateOption(currFlag, currValue):
return False
self.verbose = True
elif currFlag == "-s":
if not validateOptionPair(currFlag, currValue):
return False
self.skipSteps = currValue
elif currFlag == "-o":
if not validateOptionPair(currFlag, currValue):
return False
self.overrideFile = currValue
elif currFlag == "-d":
if not validateOptionPair(currFlag, currValue):
return False
for definePair in currValue.split(","):
splitPair = definePair.split("=")
if len(splitPair) != 2:
logger.writeError("Invalid define pair given, " +
definePair)
return False
if splitPair[0].lower() in self.commandLineDefines:
logger.writeError("Define pair already given, " +
definePair)
return False
self.commandLineDefines[splitPair[0]] = splitPair[1]
elif currFlag == "-n":
if not validateOptionPair(currFlag, currValue):
return False
names = currValue.split(",")
if len(names) == 0:
logger.writeError(
"Build target names command-line option used but no names specified."
)
return False
for name in names:
currName = name.lower().strip()
if currName == "":
logger.writeError(
"Empty build target name given on command-line (option '-n')"
)
return False
self.targetsToBuild.append(currName)
elif currFlag == "-g":
if not validateOptionPair(currFlag, currValue):
return False
names = currValue.split(",")
if len(names) == 0:
logger.writeError(
"Override group command-line option used but no names specified."
)
return False
for name in names:
currName = name.lower().strip()
if currName == "":
logger.writeError(
"Empty override group name given on command-line (option '-g')"
)
return False
self.overrideGroupNames.append(currName)
else:
logger.writeError("Command-line argument '" + currArg +
"' not understood")
return False
return True
