def setUp(self):
self.clock = Clock()
self.monkey_patcher = MonkeyPatcher()
self.monkey_patcher.addPatch(rate_limiter.time, "time", self.clock)
self.monkey_patcher.patch()
self.address = ("127.0.0.1", 55)
self.query = Query()
self.query.rpctype = "ping"
self.query._from = 15
self.query._transaction_id = 99
self.packet = krpc_coder.encode(self.query)
# Patch in hardcoded value for the bandwidth
# limits so that changing the constants will
# not effect the usefulness of this test case
# (The global bandwidth is set to 3 standard ping queries)
# (The per user bandwidth is set to 1 standard ping query)
self.monkey_patcher.addPatch(rate_limiter.constants,
"global_bandwidth_rate",
3 * len(self.packet))
self.monkey_patcher.addPatch(rate_limiter.constants,
"host_bandwidth_rate",
1 * len(self.packet))
self.monkey_patcher.patch()
def setUp(self):
self.clock = Clock()
self.monkey_patcher = MonkeyPatcher()
self.monkey_patcher.addPatch(rate_limiter.time, "time", self.clock)
self.monkey_patcher.patch()
self.address = ("127.0.0.1", 55)
self.query = Query()
self.query.rpctype = "ping"
self.query._from = 15
self.query._transaction_id = 99
self.packet = krpc_coder.encode(self.query)
# Patch in hardcoded value for the bandwidth
# limits so that changing the constants will
# not effect the usefulness of this test case
# (The global bandwidth is set to 3 standard ping queries)
# (The per user bandwidth is set to 1 standard ping query)
self.monkey_patcher.addPatch(rate_limiter.constants,
"global_bandwidth_rate", 3 * len(self.packet))
self.monkey_patcher.addPatch(rate_limiter.constants,
"host_bandwidth_rate", 1 * len(self.packet))
self.monkey_patcher.patch()
class RateLimiterPatcherTestCase(unittest.TestCase):
def setUp(self):
self.clock = Clock()
self.monkey_patcher = MonkeyPatcher()
self.monkey_patcher.addPatch(rate_limiter.time, "time", self.clock)
self.monkey_patcher.patch()
self.address = ("127.0.0.1", 55)
self.query = Query()
self.query.rpctype = "ping"
self.query._from = 15
self.query._transaction_id = 99
self.packet = krpc_coder.encode(self.query)
# Patch in hardcoded value for the bandwidth
# limits so that changing the constants will
# not effect the usefulness of this test case
# (The global bandwidth is set to 3 standard ping queries)
# (The per user bandwidth is set to 1 standard ping query)
self.monkey_patcher.addPatch(rate_limiter.constants,
"global_bandwidth_rate", 3 * len(self.packet))
self.monkey_patcher.addPatch(rate_limiter.constants,
"host_bandwidth_rate", 1 * len(self.packet))
self.monkey_patcher.patch()
def tearDown(self):
self.monkey_patcher.restore()
def _patched_sender(self):
ksender = KRPC_Sender(TreeRoutingTable, 2**50)
ksender.transport = HollowTransport()
# Start the protocol to simulate
# a regular environment
rate_limited_proto = RateLimiter_Patcher(ksender)
rate_limited_proto.startProtocol()
return rate_limited_proto
def test_inbound_overflowHostAndReset(self):
"""
Make sure that we cannot overflow our inbound host bandwidth limit
@see dhtbot.constants.host_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
counter = Counter()
rate_limited_proto.krpcReceived = counter
# One packet should be accepted without problems
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), self.address)
self.assertEquals(1, counter.count)
counter.reset()
# The second packet should be dropped
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), self.address)
self.assertEquals(0, counter.count)
# Reset the rate limiter and the next packet should
# be accepted
self.clock.set(1)
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), self.address)
self.assertEquals(1, counter.count)
def test_inbound_overflowGlobalAndReset(self):
"""
Make sure that we cannot overflow our inbound global bandwidth limit
@see dhtbot.constants.host_global_rate
"""
address1 = ("127.0.0.1", 66)
address2 = ("127.0.0.1", 76)
address3 = ("127.0.0.1", 86)
address4 = ("127.0.0.1", 555)
rate_limited_proto = self._patched_sender()
counter = Counter()
rate_limited_proto.krpcReceived = counter
# The first three packets should be accepted without
# any problems
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), address1)
self.assertEquals(1, counter.count)
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), address2)
self.assertEquals(2, counter.count)
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), address3)
self.assertEquals(3, counter.count)
# The fourth packet should be dropped
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), address4)
self.assertEquals(3, counter.count)
# Reset the rate limiter and the next packet should be
# accepted
self.clock.set(1)
rate_limited_proto.datagramReceived(
krpc_coder.encode(self.query), self.address)
self.assertEquals(4, counter.count)
def test_outbound_overflowHostAndReset(self):
"""
Make sure that we cannot overflow our outbound host bandwidth limit
@see dhtbot.constants.host_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
# The first packet should go through without any problems
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
# Second packet should not go through
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertFalse(
rate_limited_proto._original.transport._packet_was_sent())
# Update the clock (reseting the rate limiter)
self.clock.set(1)
# This packet should now go through)
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
def test_outbound_overflowGlobalAndReset(self):
"""
Make sure that we cannot overflow our outbound global bandwidth limit
@see dhtbot.constants.global_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
# Reset the hollow transport
rate_limited_proto._original.transport._reset()
# The first three packets should go through without any problems
address1 = ("127.0.0.1", 66)
address2 = ("127.0.0.1", 76)
address3 = ("127.0.0.1", 86)
address4 = ("127.0.0.1", 555)
# Packet 1, 2, 3
for i in range(1, 4):
rate_limited_proto.sendKRPC(
self.query, locals()['address' + str(i)])
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
# The fourth packet should not go through
rate_limited_proto.sendKRPC(self.query, address4)
self.assertFalse(
rate_limited_proto._original.transport._packet_was_sent())
# Change the time to reset the rate limiter
self.clock.set(1)
# This packet should now go through
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
def setUp(self):
self.clock = Clock()
self.monkey_patcher = MonkeyPatcher()
self.monkey_patcher.addPatch(rate_limiter.time, "time", self.clock)
self.monkey_patcher.patch()
class RateLimiterPatcherTestCase(unittest.TestCase):
def setUp(self):
self.clock = Clock()
self.monkey_patcher = MonkeyPatcher()
self.monkey_patcher.addPatch(rate_limiter.time, "time", self.clock)
self.monkey_patcher.patch()
self.address = ("127.0.0.1", 55)
self.query = Query()
self.query.rpctype = "ping"
self.query._from = 15
self.query._transaction_id = 99
self.packet = krpc_coder.encode(self.query)
# Patch in hardcoded value for the bandwidth
# limits so that changing the constants will
# not effect the usefulness of this test case
# (The global bandwidth is set to 3 standard ping queries)
# (The per user bandwidth is set to 1 standard ping query)
self.monkey_patcher.addPatch(rate_limiter.constants,
"global_bandwidth_rate",
3 * len(self.packet))
self.monkey_patcher.addPatch(rate_limiter.constants,
"host_bandwidth_rate",
1 * len(self.packet))
self.monkey_patcher.patch()
def tearDown(self):
self.monkey_patcher.restore()
def _patched_sender(self):
ksender = KRPC_Sender(TreeRoutingTable, 2**50)
ksender.transport = HollowTransport()
# Start the protocol to simulate
# a regular environment
rate_limited_proto = RateLimiter_Patcher(ksender)
rate_limited_proto.startProtocol()
return rate_limited_proto
def test_inbound_overflowHostAndReset(self):
"""
Make sure that we cannot overflow our inbound host bandwidth limit
@see dhtbot.constants.host_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
counter = Counter()
rate_limited_proto.krpcReceived = counter
# One packet should be accepted without problems
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
self.address)
self.assertEquals(1, counter.count)
counter.reset()
# The second packet should be dropped
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
self.address)
self.assertEquals(0, counter.count)
# Reset the rate limiter and the next packet should
# be accepted
self.clock.set(1)
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
self.address)
self.assertEquals(1, counter.count)
def test_inbound_overflowGlobalAndReset(self):
"""
Make sure that we cannot overflow our inbound global bandwidth limit
@see dhtbot.constants.host_global_rate
"""
address1 = ("127.0.0.1", 66)
address2 = ("127.0.0.1", 76)
address3 = ("127.0.0.1", 86)
address4 = ("127.0.0.1", 555)
rate_limited_proto = self._patched_sender()
counter = Counter()
rate_limited_proto.krpcReceived = counter
# The first three packets should be accepted without
# any problems
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
address1)
self.assertEquals(1, counter.count)
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
address2)
self.assertEquals(2, counter.count)
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
address3)
self.assertEquals(3, counter.count)
# The fourth packet should be dropped
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
address4)
self.assertEquals(3, counter.count)
# Reset the rate limiter and the next packet should be
# accepted
self.clock.set(1)
rate_limited_proto.datagramReceived(krpc_coder.encode(self.query),
self.address)
self.assertEquals(4, counter.count)
def test_outbound_overflowHostAndReset(self):
"""
Make sure that we cannot overflow our outbound host bandwidth limit
@see dhtbot.constants.host_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
# The first packet should go through without any problems
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
# Second packet should not go through
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertFalse(
rate_limited_proto._original.transport._packet_was_sent())
# Update the clock (reseting the rate limiter)
self.clock.set(1)
# This packet should now go through)
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
def test_outbound_overflowGlobalAndReset(self):
"""
Make sure that we cannot overflow our outbound global bandwidth limit
@see dhtbot.constants.global_bandwidth_rate
"""
rate_limited_proto = self._patched_sender()
# Reset the hollow transport
rate_limited_proto._original.transport._reset()
# The first three packets should go through without any problems
address1 = ("127.0.0.1", 66)
address2 = ("127.0.0.1", 76)
address3 = ("127.0.0.1", 86)
address4 = ("127.0.0.1", 555)
# Packet 1, 2, 3
for i in range(1, 4):
rate_limited_proto.sendKRPC(self.query,
locals()['address' + str(i)])
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
# The fourth packet should not go through
rate_limited_proto.sendKRPC(self.query, address4)
self.assertFalse(
rate_limited_proto._original.transport._packet_was_sent())
# Change the time to reset the rate limiter
self.clock.set(1)
# This packet should now go through
rate_limited_proto.sendKRPC(self.query, self.address)
self.assertTrue(
rate_limited_proto._original.transport._packet_was_sent())
