class TestDiveAirDiveOutput2(TestDive):
"""Test segments output for air dive 2."""
expected_result = [
" DESCENT: at 20m for 1:00 [RT: 1:00], on Air, SP:0.0, END:19m",
" CONST: at 20m for 29:00 [RT: 30:00], on Air, SP:0.0, END:19m",
" ASCENT: at 9m for 1:06 [RT: 31:06], on Air, SP:0.0, END:8m",
" DECO: at 9m for 0:01 [RT: 31:07], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 32:07], on Air, SP:0.0, END:5m",
" DECO: at 6m for 0:01 [RT: 32:08], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 33:08], on Air, SP:0.0, END:2m",
" DECO: at 3m for 0:50 [RT: 33:58], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 34:58], on Air, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg2 = SegmentDive(20, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg2], [self.airtank])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestDiveAirDiveOutput2(TestDive):
"""Test segments output for air dive 2."""
expected_result = [
" DESCENT: at 20m for 1:00 [RT: 1:00], on Air, SP:0.0, END:19m",
" CONST: at 20m for 29:00 [RT: 30:00], on Air, SP:0.0, END:19m",
" ASCENT: at 9m for 1:06 [RT: 31:06], on Air, SP:0.0, END:8m",
" DECO: at 9m for 0:01 [RT: 31:07], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 32:07], on Air, SP:0.0, END:5m",
" DECO: at 6m for 0:01 [RT: 32:08], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 33:08], on Air, SP:0.0, END:2m",
" DECO: at 3m for 0:50 [RT: 33:58], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 34:58], on Air, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg2 = SegmentDive(20, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg2], [self.airtank])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveAirDiveOutput1(TestDive):
"""Test segments output for air dive 1."""
expected_result = [
" DESCENT: at 30m for 1:30 [RT: 1:30], on Air, SP:0.0, END:29m",
" CONST: at 30m for 28:30 [RT: 30:00], on Air, SP:0.0, END:29m",
" ASCENT: at 15m for 1:30 [RT: 31:30], on Air, SP:0.0, END:14m",
" DECO: at 15m for 0:01 [RT: 31:31], on Air, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 32:31], on Air, SP:0.0, END:11m",
" DECO: at 12m for 0:20 [RT: 32:51], on Air, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 33:51], on Air, SP:0.0, END:8m",
" DECO: at 9m for 2:39 [RT: 36:30], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 37:30], on Air, SP:0.0, END:5m",
" DECO: at 6m for 4:59 [RT: 42:29], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 43:29], on Air, SP:0.0, END:2m",
" DECO: at 3m for 12:42 [RT: 56:11], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 57:11], on Air, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(30, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg1], [self.airtank])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveTxDiveOutput1(TestDive):
"""Test segments output for tx dive 1."""
expected_result = [
" DESCENT: at 30m for 1:30 [RT: 1:30], on Trimix 21/30, SP:0.0, END:19m",
" CONST: at 30m for 28:30 [RT: 30:00], on Trimix 21/30, SP:0.0, END:19m",
" ASCENT: at 15m for 1:30 [RT: 31:30], on Trimix 21/30, SP:0.0, END:8m",
" DECO: at 15m for 0:01 [RT: 31:31], on Trimix 21/30, SP:0.0, END:8m",
" ASCENT: at 12m for 1:00 [RT: 32:31], on Trimix 21/30, SP:0.0, END:6m",
" DECO: at 12m for 0:38 [RT: 33:09], on Trimix 21/30, SP:0.0, END:6m",
" ASCENT: at 9m for 1:00 [RT: 34:09], on Trimix 21/30, SP:0.0, END:4m",
" DECO: at 9m for 3:04 [RT: 37:13], on Trimix 21/30, SP:0.0, END:4m",
" ASCENT: at 6m for 1:00 [RT: 38:13], on Trimix 21/30, SP:0.0, END:1m",
" DECO: at 6m for 6:25 [RT: 44:38], on Trimix 21/30, SP:0.0, END:1m",
" ASCENT: at 3m for 1:00 [RT: 45:38], on Trimix 21/30, SP:0.0, END:0m",
" DECO: at 3m for 16:12 [RT: 61:50], on Trimix 21/30, SP:0.0, END:0m",
" ASCENT: at 0m for 1:00 [RT: 62:50], on Trimix 21/30, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(30, 30 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg1], [self.txtank1])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveTxDiveOutput1(TestDive):
"""Test segments output for tx dive 1."""
expected_result = [
" DESCENT: at 30m for 1:30 [RT: 1:30], on Trimix 21/30, SP:0.0, END:19m",
" CONST: at 30m for 28:30 [RT: 30:00], on Trimix 21/30, SP:0.0, END:19m",
" ASCENT: at 15m for 1:30 [RT: 31:30], on Trimix 21/30, SP:0.0, END:8m",
" DECO: at 15m for 0:01 [RT: 31:31], on Trimix 21/30, SP:0.0, END:8m",
" ASCENT: at 12m for 1:00 [RT: 32:31], on Trimix 21/30, SP:0.0, END:6m",
" DECO: at 12m for 0:38 [RT: 33:09], on Trimix 21/30, SP:0.0, END:6m",
" ASCENT: at 9m for 1:00 [RT: 34:09], on Trimix 21/30, SP:0.0, END:4m",
" DECO: at 9m for 3:04 [RT: 37:13], on Trimix 21/30, SP:0.0, END:4m",
" ASCENT: at 6m for 1:00 [RT: 38:13], on Trimix 21/30, SP:0.0, END:1m",
" DECO: at 6m for 6:25 [RT: 44:38], on Trimix 21/30, SP:0.0, END:1m",
" ASCENT: at 3m for 1:00 [RT: 45:38], on Trimix 21/30, SP:0.0, END:0m",
" DECO: at 3m for 16:12 [RT: 61:50], on Trimix 21/30, SP:0.0, END:0m",
" ASCENT: at 0m for 1:00 [RT: 62:50], on Trimix 21/30, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(30, 30 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg1], [self.txtank1])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestDiveAirDiveOutput1(TestDive):
"""Test segments output for air dive 1."""
expected_result = [
" DESCENT: at 30m for 1:30 [RT: 1:30], on Air, SP:0.0, END:29m",
" CONST: at 30m for 28:30 [RT: 30:00], on Air, SP:0.0, END:29m",
" ASCENT: at 15m for 1:30 [RT: 31:30], on Air, SP:0.0, END:14m",
" DECO: at 15m for 0:01 [RT: 31:31], on Air, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 32:31], on Air, SP:0.0, END:11m",
" DECO: at 12m for 0:20 [RT: 32:51], on Air, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 33:51], on Air, SP:0.0, END:8m",
" DECO: at 9m for 2:39 [RT: 36:30], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 37:30], on Air, SP:0.0, END:5m",
" DECO: at 6m for 4:59 [RT: 42:29], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 43:29], on Air, SP:0.0, END:2m",
" DECO: at 3m for 12:42 [RT: 56:11], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 57:11], on Air, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(30, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg1], [self.airtank])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestDiveAirDiveRunTime2(TestDive):
def runTest(self):
diveseg2 = SegmentDive(20, 30 * 60, self.airtank, 0)
self.profile2 = Dive([diveseg2], [self.airtank])
self.profile2.do_dive()
self.assertEqual(seconds_to_mmss(self.profile2.run_time),
' 32:04', 'bad dive runtime (%s)'
% seconds_to_mmss(self.profile2.run_time))
class TestDiveAirDiveRunTime3(TestDive):
def runTest(self):
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile3 = Dive([diveseg3], [self.airdouble])
self.profile3.do_dive()
self.assertEqual(seconds_to_mmss(self.profile3.run_time),
'131:05', 'bad dive runtime (%s)'
% seconds_to_mmss(self.profile3.run_time))
class TestDiveTxDiveRunTime1(TestDive):
def runTest(self):
diveseg1 = SegmentDive(30, 30 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg1], [self.txtank1])
self.profile1.do_dive()
self.assertEqual(seconds_to_mmss(self.profile1.run_time),
' 55:03', 'bad dive runtime (%s)'
% seconds_to_mmss(self.profile1.run_time))
class TestDiveAirDiveRunTime1(TestDive):
def runTest(self):
diveseg1 = SegmentDive(30, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg1], [self.airtank])
self.profile1.do_dive()
self.assertEqual(seconds_to_mmss(self.profile1.run_time),
' 48:24', 'bad dive runtime ? (%s)'
% seconds_to_mmss(self.profile1.run_time))
class TestDiveNotEnoughGas1(TestDive):
def runTest(self):
diveseg1 = SegmentDive(60, 30 * 60, self.air12l, 0)
self.profile1 = Dive([diveseg1], [self.air12l])
self.profile1.do_dive()
self.assertEqual(self.profile1.tanks[0].check_rule(), False,
'Wrong tank status : it should fail the remaining '
'gas rule test (result:%s)'
% self.profile1.tanks[0].check_rule())
class TestRepetitiveDive1(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(40, 20 * 60, self.airtank12, 0)
self.profile0 = Dive([diveseg1], [self.airtank12])
self.profile0.do_dive()
diveseg2 = SegmentDive(40, 20 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg2], [self.airtank], self.profile0)
self.profile1.do_surface_interval(20 * 60)
self.profile1.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile1.run_time) == ' 68:09', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile1.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile1.model.ox_tox.otu,
40.0702502936, 7, 'bad dive OTU ? (%s)'
% self.profile1.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile1.model.ox_tox.cns * 100,
14.3091665925, 7, 'bad dive CNS ? (%s)'
% (self.profile1.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.airtank12.used_gas, 2115.5196384,
7, 'bad used gas (%s)'
% self.airtank12.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile1.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile1.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile1.no_flight_time()
self.assertEqual(no_flight_time, 5460, 'Bad no flight time: %s'
% no_flight_time)
def test_no_flight_wo_exc(self):
no_flight_time = self.profile1.no_flight_time_wo_exception()
self.assertEqual(no_flight_time, 5460, 'Bad no flight time: %s'
% no_flight_time)
def test_surfaceint(self):
self.assertEqual(self.profile1.get_surface_interval(),
' 20:00',
'wrong surface interval:%s'
% self.profile1.get_surface_interval())
class TestDiveNotEnoughGas1(TestDive):
"""Test a profile with not enough gas."""
def runTest(self):
"""Not enought gas test"""
diveseg1 = SegmentDive(60, 30 * 60, self.air12l, 0)
self.profile1 = Dive([diveseg1], [self.air12l])
self.profile1.do_dive()
self.assertEqual(
self.profile1.tanks[0].check_rule(), False,
'Wrong tank status : it should fail the remaining '
'gas rule test (result:%s)' % self.profile1.tanks[0].check_rule())
class TestRepetitiveTxDive3(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(55, 20 * 60, self.txtank1, 0)
self.profile0 = Dive([diveseg1], [self.txtank1])
self.profile0.do_dive()
diveseg2 = SegmentDive(50, 20 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg2], [self.txtank1], self.profile0)
self.profile1.do_surface_interval(30 * 60)
self.profile1.do_dive()
diveseg3 = SegmentDive(35, 35 * 60, self.txtank1, 0)
self.profile2 = Dive([diveseg3], [self.txtank1], self.profile1)
self.profile2.do_surface_interval(60 * 60)
# self.profile2.refill_tanks()
self.profile2.do_dive()
diveseg4 = SegmentDive(55, 20 * 60, self.txtank1, 0)
self.profile3 = Dive([diveseg4], [self.txtank1], self.profile2)
self.profile3.do_surface_interval(12 * 60 * 60)
# self.profile3.refill_tanks()
self.profile3.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile3.run_time) == ' 72:40', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile3.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile3.model.ox_tox.otu,
115.825853006, 7, 'bad dive OTU ? (%s)'
% self.profile3.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile3.model.ox_tox.cns * 100,
12.6208702934, 7, 'bad dive CNS ? (%s)'
% (self.profile3.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.txtank1.used_gas, 3350.41341833, 7,
'bad used gas (%s)'
% self.txtank1.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile3.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile2.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile3.no_flight_time()
self.assertEqual(no_flight_time, 7380, 'Bad no flight time: %s'
% no_flight_time)
class TestDiveAirDiveOutput2(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg2 = SegmentDive(20, 30 * 60, self.airtank, 0)
self.profile2 = Dive([diveseg2], [self.airtank])
self.profile2.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile2.output_segments[0]),
' DESCENT: at 20m for 1:00 [RT: 1:00], '
'on Air, SP:0.0, END:19m',
'bad segment (%s)'
% self.profile2.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile2.output_segments[1]),
' CONST: at 20m for 29:00 [RT: 30:00], '
'on Air, SP:0.0, END:19m',
'bad segment (%s)'
% self.profile2.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile2.output_segments[2]),
' ASCENT: at 9m for 1:06 [RT: 31:06], '
'on Air, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile2.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile2.output_segments[3]),
' DECO: at 9m for 0:01 [RT: 31:07], '
'on Air, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile2.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile2.output_segments[4]),
' DECO: at 6m for 0:01 [RT: 31:08], '
'on Air, SP:0.0, END:5m',
'bad segment (%s)'
% self.profile2.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile2.output_segments[5]),
' DECO: at 3m for 0:56 [RT: 32:04], '
'on Air, SP:0.0, END:2m',
'bad segment (%s)'
% self.profile2.output_segments[5])
class TestDiveAir70m10min(TestDive):
"""Test air 70m 10min."""
params = ((70, 10), )
def runTest(self):
"""Run one test."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.airdouble, 0)
self.profile1 = Dive([diveseg1], [self.airdouble])
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveAir70m10min(TestDive):
"""Test air 70m 10min."""
params = ((70, 10), )
def runTest(self):
"""Run one test."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.airdouble, 0)
self.profile1 = Dive([diveseg1], [self.airdouble])
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestRepetitiveTxDive1(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(55, 20 * 60, self.txtank1, 0)
self.profile0 = Dive([diveseg1], [self.txtank1])
self.profile0.do_dive()
diveseg2 = SegmentDive(50, 20 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg2], [self.txtank1], self.profile0)
self.profile1.do_surface_interval(20 * 60)
# self.profile1.refill_tanks()
self.profile1.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile1.run_time) == '124:44', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile1.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile1.model.ox_tox.otu,
55.5549635111, 7, 'bad dive OTU ? (%s)'
% self.profile1.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile1.model.ox_tox.cns * 100,
21.1631708375, 7, 'bad dive CNS ? (%s)'
% (self.profile1.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.txtank1.used_gas, 4006.7619273, 7,
'bad used gas (%s)'
% self.txtank1.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile1.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile1.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile1.no_flight_time()
self.assertEqual(no_flight_time, 12660, 'Bad no flight time: %s'
% no_flight_time)
class TestDiveTxHypo160m10min(TestDive):
"""Test TxHypo 160m 10min."""
params = ((160, 10), )
def runTest(self):
"""Run one test."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.txhypo, 0)
self.profile1 = Dive([diveseg1], [self.txtravel,
self.txhypo, self.deco1])
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail('should raise UnauthorizedMod')
class TestDiveTxNormoDecoNx8070m10min(TestDive):
"""Test txnormo 70m 10min."""
params = ((70, 10), )
def runTest(self):
"""Run one test."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.txtanknormodbl, 0)
self.profile1 = Dive([diveseg1], [self.txtanknormodbl,
self.deco1])
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveTxHypo160m10min(TestDive):
"""Test TxHypo 160m 10min."""
params = ((160, 10), )
def runTest(self):
"""Run one test."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.txhypo, 0)
self.profile1 = Dive([diveseg1],
[self.txtravel, self.txhypo, self.deco1])
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail('should raise UnauthorizedMod')
class TestDiveTxHypo160m10min(TestDive):
"""Test tx hypo 160m 10min."""
params = ((160, 10),)
def runTest(self):
"""Should raise an error."""
try:
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60, self.txhypo, 0)
self.profile1 = Dive(
[SegmentDive(40, 130, self.txtravel, 0), SegmentDive(40, 30, self.txhypo, 0), diveseg1],
[self.txtravel, self.txhypo, self.deco1],
)
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveCCAir50m10min(TestDive):
"""Test air 70m 10min."""
params = ((50, 10),)
def runTest(self):
"""Run one test."""
try:
self.setpoint = 1.2
self.dive_tank = self.ccair
self.all_tanks = [self.ccair]
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60, self.dive_tank, self.setpoint)
self.profile1 = Dive([diveseg1], self.all_tanks)
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveAirDiveOutput4(TestDive):
"""Test segments output for air dive 4."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Air, SP:0.0, END:53m",
" CONST: at 55m for 27:15 [RT: 30:00], on Air, SP:0.0, END:53m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Air, SP:0.0, END:29m",
" DECO: at 30m for 0:01 [RT: 32:31], on Air, SP:0.0, END:29m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Air, SP:0.0, END:26m",
" DECO: at 27m for 1:11 [RT: 34:42], on Air, SP:0.0, END:26m",
" ASCENT: at 24m for 1:00 [RT: 35:42], on Air, SP:0.0, END:23m",
" DECO: at 24m for 1:27 [RT: 37:09], on Air, SP:0.0, END:23m",
" ASCENT: at 21m for 1:00 [RT: 38:09], on Air, SP:0.0, END:20m",
" DECO: at 21m for 1:35 [RT: 39:44], on Nitrox 50, SP:0.0, END:20m",
" ASCENT: at 18m for 1:00 [RT: 40:44], on Nitrox 50, SP:0.0, END:17m",
" DECO: at 18m for 2:03 [RT: 42:47], on Nitrox 50, SP:0.0, END:17m",
" ASCENT: at 15m for 1:00 [RT: 43:47], on Nitrox 50, SP:0.0, END:14m",
" DECO: at 15m for 2:55 [RT: 46:42], on Nitrox 50, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 47:42], on Nitrox 50, SP:0.0, END:11m",
" DECO: at 12m for 4:13 [RT: 51:55], on Nitrox 50, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 52:55], on Nitrox 50, SP:0.0, END:8m",
" DECO: at 9m for 6:41 [RT: 59:36], on Nitrox 50, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 60:36], on Nitrox 50, SP:0.0, END:5m",
" DECO: at 6m for 7:20 [RT: 67:56], on Oxygen, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 68:56], on Oxygen, SP:0.0, END:2m",
" DECO: at 3m for 12:32 [RT: 81:28], on Oxygen, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 82:28], on Oxygen, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile1 = Dive([diveseg3], [self.airdouble, self.decoo2,
self.deco2])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveAirDiveOutput4(TestDive):
"""Test segments output for air dive 4."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Air, SP:0.0, END:53m",
" CONST: at 55m for 27:15 [RT: 30:00], on Air, SP:0.0, END:53m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Air, SP:0.0, END:29m",
" DECO: at 30m for 0:01 [RT: 32:31], on Air, SP:0.0, END:29m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Air, SP:0.0, END:26m",
" DECO: at 27m for 1:11 [RT: 34:42], on Air, SP:0.0, END:26m",
" ASCENT: at 24m for 1:00 [RT: 35:42], on Air, SP:0.0, END:23m",
" DECO: at 24m for 1:27 [RT: 37:09], on Air, SP:0.0, END:23m",
" ASCENT: at 21m for 1:00 [RT: 38:09], on Air, SP:0.0, END:20m",
" DECO: at 21m for 1:35 [RT: 39:44], on Nitrox 50, SP:0.0, END:20m",
" ASCENT: at 18m for 1:00 [RT: 40:44], on Nitrox 50, SP:0.0, END:17m",
" DECO: at 18m for 2:03 [RT: 42:47], on Nitrox 50, SP:0.0, END:17m",
" ASCENT: at 15m for 1:00 [RT: 43:47], on Nitrox 50, SP:0.0, END:14m",
" DECO: at 15m for 2:55 [RT: 46:42], on Nitrox 50, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 47:42], on Nitrox 50, SP:0.0, END:11m",
" DECO: at 12m for 4:13 [RT: 51:55], on Nitrox 50, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 52:55], on Nitrox 50, SP:0.0, END:8m",
" DECO: at 9m for 6:41 [RT: 59:36], on Nitrox 50, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 60:36], on Nitrox 50, SP:0.0, END:5m",
" DECO: at 6m for 7:20 [RT: 67:56], on Oxygen, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 68:56], on Oxygen, SP:0.0, END:2m",
" DECO: at 3m for 12:32 [RT: 81:28], on Oxygen, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 82:28], on Oxygen, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile1 = Dive([diveseg3],
[self.airdouble, self.decoo2, self.deco2])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestDiveCCRDiveOutput1(TestDive):
"""Test segments output for ccr dive 1."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Trimix 21/30, SP:1.4, END:38m",
" CONST: at 55m for 27:15 [RT: 30:00], on Trimix 21/30, SP:1.4, END:38m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Trimix 21/30, SP:1.4, END:21m",
" DECO: at 30m for 0:01 [RT: 32:31], on Trimix 21/30, SP:1.4, END:21m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Trimix 21/30, SP:1.4, END:19m",
" DECO: at 27m for 0:31 [RT: 34:02], on Trimix 21/30, SP:1.4, END:19m",
" ASCENT: at 24m for 1:00 [RT: 35:02], on Trimix 21/30, SP:1.4, END:17m",
" DECO: at 24m for 1:02 [RT: 36:04], on Trimix 21/30, SP:1.4, END:17m",
" ASCENT: at 21m for 1:00 [RT: 37:04], on Trimix 21/30, SP:1.4, END:15m",
" DECO: at 21m for 1:26 [RT: 38:30], on Trimix 21/30, SP:1.4, END:15m",
" ASCENT: at 18m for 1:00 [RT: 39:30], on Trimix 21/30, SP:1.4, END:13m",
" DECO: at 18m for 1:55 [RT: 41:25], on Trimix 21/30, SP:1.4, END:13m",
" ASCENT: at 15m for 1:00 [RT: 42:25], on Trimix 21/30, SP:1.4, END:11m",
" DECO: at 15m for 2:21 [RT: 44:46], on Trimix 21/30, SP:1.4, END:11m",
" ASCENT: at 12m for 1:00 [RT: 45:46], on Trimix 21/30, SP:1.4, END:9m",
" DECO: at 12m for 3:21 [RT: 49:07], on Trimix 21/30, SP:1.4, END:9m",
" ASCENT: at 9m for 1:00 [RT: 50:07], on Trimix 21/30, SP:1.4, END:7m",
" DECO: at 9m for 5:15 [RT: 55:22], on Trimix 21/30, SP:1.4, END:7m",
" ASCENT: at 6m for 1:00 [RT: 56:22], on Trimix 21/30, SP:1.4, END:4m",
" DECO: at 6m for 6:44 [RT: 63:06], on Oxygen, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 64:06], on Oxygen, SP:0.0, END:2m",
" DECO: at 3m for 12:26 [RT: 76:32], on Oxygen, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 77:32], on Oxygen, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(55, 30 * 60, self.txtank1, 1.4)
self.profile1 = Dive([diveseg1], [self.txtank1, self.decoo2])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveCCTxHypo110m10min(TestDive):
"""test CC tx hypo 110m 10min."""
params = ((110, 10), )
def runTest(self):
"""Should raise and error."""
try:
self.setpoint = 1.2
self.dive_tank = self.cctxhypo
self.all_tanks = [self.cctxhypo]
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.dive_tank, self.setpoint)
self.profile1 = Dive([diveseg1], self.all_tanks)
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveCCAir50m10min(TestDive):
"""Test air 70m 10min."""
params = ((50, 10), )
def runTest(self):
"""Run one test."""
try:
self.setpoint = 1.2
self.dive_tank = self.ccair
self.all_tanks = [self.ccair]
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.dive_tank, self.setpoint)
self.profile1 = Dive([diveseg1], self.all_tanks)
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveAirDiveOutput3(TestDive):
"""Test segments output for air dive 3."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Air, SP:0.0, END:53m",
" CONST: at 55m for 27:15 [RT: 30:00], on Air, SP:0.0, END:53m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Air, SP:0.0, END:29m",
" DECO: at 30m for 0:01 [RT: 32:31], on Air, SP:0.0, END:29m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Air, SP:0.0, END:26m",
" DECO: at 27m for 1:11 [RT: 34:42], on Air, SP:0.0, END:26m",
" ASCENT: at 24m for 1:00 [RT: 35:42], on Air, SP:0.0, END:23m",
" DECO: at 24m for 1:27 [RT: 37:09], on Air, SP:0.0, END:23m",
" ASCENT: at 21m for 1:00 [RT: 38:09], on Air, SP:0.0, END:20m",
" DECO: at 21m for 2:34 [RT: 40:43], on Air, SP:0.0, END:20m",
" ASCENT: at 18m for 1:00 [RT: 41:43], on Air, SP:0.0, END:17m",
" DECO: at 18m for 3:17 [RT: 45:00], on Air, SP:0.0, END:17m",
" ASCENT: at 15m for 1:00 [RT: 46:00], on Air, SP:0.0, END:14m",
" DECO: at 15m for 5:24 [RT: 51:24], on Air, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 52:24], on Air, SP:0.0, END:11m",
" DECO: at 12m for 7:02 [RT: 59:26], on Air, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 60:26], on Air, SP:0.0, END:8m",
" DECO: at 9m for 13:49 [RT: 74:15], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 75:15], on Air, SP:0.0, END:5m",
" DECO: at 6m for 25:28 [RT:100:43], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT:101:43], on Air, SP:0.0, END:2m",
" DECO: at 3m for 52:20 [RT:154:03], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT:155:03], on Air, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile1 = Dive([diveseg3], [self.airdouble])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestDiveCCTxHypo110m10min(TestDive):
"""test CC tx hypo 110m 10min."""
params = ((110, 10), )
def runTest(self):
"""Should raise and error."""
try:
self.setpoint = 1.2
self.dive_tank = self.cctxhypo
self.all_tanks = [self.cctxhypo]
diveseg1 = SegmentDive(self.params[0][0], self.params[0][1] * 60,
self.dive_tank, self.setpoint)
self.profile1 = Dive([diveseg1], self.all_tanks)
self.profile1.do_dive()
except UnauthorizedMod:
pass
else:
self.fail("should raise UnauthorizedMod")
class TestDiveAirDiveOutput3(TestDive):
"""Test segments output for air dive 3."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Air, SP:0.0, END:53m",
" CONST: at 55m for 27:15 [RT: 30:00], on Air, SP:0.0, END:53m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Air, SP:0.0, END:29m",
" DECO: at 30m for 0:01 [RT: 32:31], on Air, SP:0.0, END:29m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Air, SP:0.0, END:26m",
" DECO: at 27m for 1:11 [RT: 34:42], on Air, SP:0.0, END:26m",
" ASCENT: at 24m for 1:00 [RT: 35:42], on Air, SP:0.0, END:23m",
" DECO: at 24m for 1:27 [RT: 37:09], on Air, SP:0.0, END:23m",
" ASCENT: at 21m for 1:00 [RT: 38:09], on Air, SP:0.0, END:20m",
" DECO: at 21m for 2:34 [RT: 40:43], on Air, SP:0.0, END:20m",
" ASCENT: at 18m for 1:00 [RT: 41:43], on Air, SP:0.0, END:17m",
" DECO: at 18m for 3:17 [RT: 45:00], on Air, SP:0.0, END:17m",
" ASCENT: at 15m for 1:00 [RT: 46:00], on Air, SP:0.0, END:14m",
" DECO: at 15m for 5:24 [RT: 51:24], on Air, SP:0.0, END:14m",
" ASCENT: at 12m for 1:00 [RT: 52:24], on Air, SP:0.0, END:11m",
" DECO: at 12m for 7:02 [RT: 59:26], on Air, SP:0.0, END:11m",
" ASCENT: at 9m for 1:00 [RT: 60:26], on Air, SP:0.0, END:8m",
" DECO: at 9m for 13:49 [RT: 74:15], on Air, SP:0.0, END:8m",
" ASCENT: at 6m for 1:00 [RT: 75:15], on Air, SP:0.0, END:5m",
" DECO: at 6m for 25:28 [RT:100:43], on Air, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT:101:43], on Air, SP:0.0, END:2m",
" DECO: at 3m for 52:20 [RT:154:03], on Air, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT:155:03], on Air, SP:0.0, END:0m", ]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile1 = Dive([diveseg3], [self.airdouble])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx],
'bad segment n°%s (%s)' % (
idx, self.profile1.output_segments[idx]))
class TestDiveCCRDiveOutput1(TestDive):
"""Test segments output for ccr dive 1."""
expected_result = [
" DESCENT: at 55m for 2:45 [RT: 2:45], on Trimix 21/30, SP:1.4, END:38m",
" CONST: at 55m for 27:15 [RT: 30:00], on Trimix 21/30, SP:1.4, END:38m",
" ASCENT: at 30m for 2:30 [RT: 32:30], on Trimix 21/30, SP:1.4, END:21m",
" DECO: at 30m for 0:01 [RT: 32:31], on Trimix 21/30, SP:1.4, END:21m",
" ASCENT: at 27m for 1:00 [RT: 33:31], on Trimix 21/30, SP:1.4, END:19m",
" DECO: at 27m for 0:31 [RT: 34:02], on Trimix 21/30, SP:1.4, END:19m",
" ASCENT: at 24m for 1:00 [RT: 35:02], on Trimix 21/30, SP:1.4, END:17m",
" DECO: at 24m for 1:02 [RT: 36:04], on Trimix 21/30, SP:1.4, END:17m",
" ASCENT: at 21m for 1:00 [RT: 37:04], on Trimix 21/30, SP:1.4, END:15m",
" DECO: at 21m for 1:26 [RT: 38:30], on Trimix 21/30, SP:1.4, END:15m",
" ASCENT: at 18m for 1:00 [RT: 39:30], on Trimix 21/30, SP:1.4, END:13m",
" DECO: at 18m for 1:55 [RT: 41:25], on Trimix 21/30, SP:1.4, END:13m",
" ASCENT: at 15m for 1:00 [RT: 42:25], on Trimix 21/30, SP:1.4, END:11m",
" DECO: at 15m for 2:21 [RT: 44:46], on Trimix 21/30, SP:1.4, END:11m",
" ASCENT: at 12m for 1:00 [RT: 45:46], on Trimix 21/30, SP:1.4, END:9m",
" DECO: at 12m for 3:21 [RT: 49:07], on Trimix 21/30, SP:1.4, END:9m",
" ASCENT: at 9m for 1:00 [RT: 50:07], on Trimix 21/30, SP:1.4, END:7m",
" DECO: at 9m for 5:15 [RT: 55:22], on Trimix 21/30, SP:1.4, END:7m",
" ASCENT: at 6m for 1:00 [RT: 56:22], on Trimix 21/30, SP:1.4, END:4m",
" DECO: at 6m for 6:44 [RT: 63:06], on Oxygen, SP:0.0, END:5m",
" ASCENT: at 3m for 1:00 [RT: 64:06], on Oxygen, SP:0.0, END:2m",
" DECO: at 3m for 12:26 [RT: 76:32], on Oxygen, SP:0.0, END:2m",
" ASCENT: at 0m for 1:00 [RT: 77:32], on Oxygen, SP:0.0, END:0m",
]
def setUp(self):
"""Init of the tests."""
super().setUp()
diveseg1 = SegmentDive(55, 30 * 60, self.txtank1, 1.4)
self.profile1 = Dive([diveseg1], [self.txtank1, self.decoo2])
self.profile1.do_dive()
def test_segments(self):
"""Check all segments."""
for idx in range(len(self.expected_result)):
self.assertEqual(
str(self.profile1.output_segments[idx]),
self.expected_result[idx], 'bad segment n°%s (%s)' %
(idx, self.profile1.output_segments[idx]))
class TestRepetitiveTxDive2(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(55, 20 * 60, self.txtank1, 0)
self.profile0 = Dive([diveseg1], [self.txtank1])
self.profile0.do_dive()
diveseg2 = SegmentDive(50, 20 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg2], [self.txtank1], self.profile0)
self.profile1.do_surface_interval(30 * 60)
self.profile1.do_dive()
diveseg3 = SegmentDive(35, 35 * 60, self.txtank1, 0)
self.profile2 = Dive([diveseg3], [self.txtank1], self.profile1)
self.profile2.do_surface_interval(60 * 60)
# self.profile2.refill_tanks()
self.profile2.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile2.run_time) == '166:21', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile2.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile2.model.ox_tox.otu,
86.5037540773, 7, 'bad dive OTU ? (%s)'
% self.profile2.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile2.model.ox_tox.cns * 100,
24.2843630006, 7, 'bad dive CNS ? (%s)'
% (self.profile2.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.txtank1.used_gas, 4979.54636588, 7,
'bad used gas (%s)'
% self.txtank1.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile2.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile2.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile2.no_flight_time()
self.assertEqual(no_flight_time, 18960, 'Bad no flight time: %s'
% no_flight_time)
class TestDiveCCRDiveOutput1(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(55, 30 * 60, self.txtank1, 1.4)
self.profile1 = Dive([diveseg1], [self.txtank1, self.decoo2])
self.profile1.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile1.output_segments[0]),
' DESCENT: at 55m for 2:45 [RT: 2:45], '
'on Trimix 21/30, SP:1.4, END:38m',
'bad segment (%s)'
% self.profile1.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile1.output_segments[1]),
' CONST: at 55m for 27:15 [RT: 30:00], '
'on Trimix 21/30, SP:1.4, END:38m',
'bad segment (%s)'
% self.profile1.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile1.output_segments[2]),
' ASCENT: at 30m for 2:30 [RT: 32:30], '
'on Trimix 21/30, SP:1.4, END:21m',
'bad segment (%s)'
% self.profile1.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile1.output_segments[3]),
' DECO: at 30m for 0:01 [RT: 32:31], '
'on Trimix 21/30, SP:1.4, END:21m',
'bad segment (%s)'
% self.profile1.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile1.output_segments[4]),
' DECO: at 27m for 0:36 [RT: 33:07], '
'on Trimix 21/30, SP:1.4, END:19m',
'bad segment (%s)'
% self.profile1.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile1.output_segments[5]),
' DECO: at 24m for 1:08 [RT: 34:15], '
'on Trimix 21/30, SP:1.4, END:17m',
'bad segment (%s)'
% self.profile1.output_segments[5])
def test_segment7(self):
self.assertEqual(str(self.profile1.output_segments[6]),
' DECO: at 21m for 1:32 [RT: 35:47], '
'on Trimix 21/30, SP:1.4, END:15m',
'bad segment (%s)'
% self.profile1.output_segments[6])
def test_segment8(self):
self.assertEqual(str(self.profile1.output_segments[7]),
' DECO: at 18m for 2:01 [RT: 37:48], '
'on Trimix 21/30, SP:1.4, END:13m',
'bad segment (%s)'
% self.profile1.output_segments[7])
def test_segment9(self):
self.assertEqual(str(self.profile1.output_segments[8]),
' DECO: at 15m for 2:14 [RT: 40:02], '
'on Trimix 21/30, SP:1.4, END:11m',
'bad segment (%s)'
% self.profile1.output_segments[8])
def test_segment10(self):
self.assertEqual(str(self.profile1.output_segments[9]),
' DECO: at 12m for 3:21 [RT: 43:23], '
'on Trimix 21/30, SP:1.4, END:9m',
'bad segment (%s)'
% self.profile1.output_segments[9])
def test_segment11(self):
self.assertEqual(str(self.profile1.output_segments[10]),
' DECO: at 9m for 5:05 [RT: 48:28], '
'on Trimix 21/30, SP:1.4, END:7m',
'bad segment (%s)'
% self.profile1.output_segments[10])
def test_segment12(self):
self.assertEqual(str(self.profile1.output_segments[11]),
' DECO: at 6m for 6:28 [RT: 54:56], '
'on Oxygen, SP:0.0, END:5m',
'bad segment (%s)'
% self.profile1.output_segments[11])
def test_segment13(self):
self.assertEqual(str(self.profile1.output_segments[12]),
' DECO: at 3m for 11:52 [RT: 66:48], '
'on Oxygen, SP:0.0, END:2m',
'bad segment (%s)'
% self.profile1.output_segments[12])
class TestDiveTxDiveOutput1(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(30, 30 * 60, self.txtank1, 0)
self.profile1 = Dive([diveseg1], [self.txtank1])
self.profile1.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile1.output_segments[0]),
' DESCENT: at 30m for 1:30 [RT: 1:30], '
'on Trimix 21/30, SP:0.0, END:19m',
'bad segment (%s)'
% self.profile1.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile1.output_segments[1]),
' CONST: at 30m for 28:30 [RT: 30:00], '
'on Trimix 21/30, SP:0.0, END:19m',
'bad segment (%s)'
% self.profile1.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile1.output_segments[2]),
' ASCENT: at 15m for 1:30 [RT: 31:30], '
'on Trimix 21/30, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile1.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile1.output_segments[3]),
' DECO: at 15m for 0:01 [RT: 31:31], '
'on Trimix 21/30, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile1.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile1.output_segments[4]),
' DECO: at 12m for 0:43 [RT: 32:14], '
'on Trimix 21/30, SP:0.0, END:6m',
'bad segment (%s)'
% self.profile1.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile1.output_segments[5]),
' DECO: at 9m for 3:08 [RT: 35:22], '
'on Trimix 21/30, SP:0.0, END:4m',
'bad segment (%s)'
% self.profile1.output_segments[5])
def test_segment7(self):
self.assertEqual(str(self.profile1.output_segments[6]),
' DECO: at 6m for 5:15 [RT: 40:37], '
'on Trimix 21/30, SP:0.0, END:1m',
'bad segment (%s)'
% self.profile1.output_segments[6])
def test_segment8(self):
self.assertEqual(str(self.profile1.output_segments[7]),
' DECO: at 3m for 14:26 [RT: 55:03], '
'on Trimix 21/30, SP:0.0, END:0m',
'bad segment (%s)'
% self.profile1.output_segments[7])
class TestDiveAirDiveOutput4(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile3 = Dive([diveseg3], [self.airdouble, self.decoo2,
self.deco2])
self.profile3.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile3.output_segments[0]),
' DESCENT: at 55m for 2:45 [RT: 2:45], '
'on Air, SP:0.0, END:53m',
'bad segment (%s)'
% self.profile3.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile3.output_segments[1]),
' CONST: at 55m for 27:15 [RT: 30:00], '
'on Air, SP:0.0, END:53m',
'bad segment (%s)'
% self.profile3.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile3.output_segments[2]),
' ASCENT: at 30m for 2:30 [RT: 32:30], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile3.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile3.output_segments[3]),
' DECO: at 30m for 0:01 [RT: 32:31], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile3.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile3.output_segments[4]),
' DECO: at 27m for 1:15 [RT: 33:46], '
'on Air, SP:0.0, END:26m',
'bad segment (%s)'
% self.profile3.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile3.output_segments[5]),
' DECO: at 24m for 1:33 [RT: 35:19], '
'on Air, SP:0.0, END:23m',
'bad segment (%s)'
% self.profile3.output_segments[5])
def test_segment7(self):
self.assertEqual(str(self.profile3.output_segments[6]),
' DECO: at 21m for 1:37 [RT: 36:56], '
'on Nitrox 50, SP:0.0, END:20m',
'bad segment (%s)'
% self.profile3.output_segments[6])
def test_segment8(self):
self.assertEqual(str(self.profile3.output_segments[7]),
' DECO: at 18m for 2:09 [RT: 39:05], '
'on Nitrox 50, SP:0.0, END:17m',
'bad segment (%s)'
% self.profile3.output_segments[7])
def test_segment9(self):
self.assertEqual(str(self.profile3.output_segments[8]),
' DECO: at 15m for 2:59 [RT: 42:04], '
'on Nitrox 50, SP:0.0, END:14m',
'bad segment (%s)'
% self.profile3.output_segments[8])
def test_segment10(self):
self.assertEqual(str(self.profile3.output_segments[9]),
' DECO: at 12m for 4:18 [RT: 46:22], '
'on Nitrox 50, SP:0.0, END:11m',
'bad segment (%s)'
% self.profile3.output_segments[9])
def test_segment11(self):
self.assertEqual(str(self.profile3.output_segments[10]),
' DECO: at 9m for 5:48 [RT: 52:10], '
'on Nitrox 50, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile3.output_segments[10])
def test_segment12(self):
self.assertEqual(str(self.profile3.output_segments[11]),
' DECO: at 6m for 6:40 [RT: 58:50], '
'on Oxygen, SP:0.0, END:5m',
'bad segment (%s)'
% self.profile3.output_segments[11])
def test_segment13(self):
self.assertEqual(str(self.profile3.output_segments[12]),
' DECO: at 3m for 11:31 [RT: 70:21], '
'on Oxygen, SP:0.0, END:2m',
'bad segment (%s)'
% self.profile3.output_segments[12])
class TestRepetitiveDive2(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(40, 20 * 60, self.airtank12, 0)
self.profile0 = Dive([diveseg1], [self.airtank12])
self.profile0.do_dive()
diveseg2 = SegmentDive(30, 40 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg2], [self.airtank], self.profile0)
self.profile1.do_surface_interval(30 * 60)
self.profile1.do_dive()
diveseg3 = SegmentDive(25, 35 * 60, self.airtank, 0)
self.profile2 = Dive([diveseg3], [self.airtank], self.profile1)
self.profile2.do_surface_interval(60 * 60)
# self.profile2.refill_tanks()
self.profile2.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile2.run_time) == ' 70:18', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile2.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile2.model.ox_tox.otu,
66.8427163401, 7, 'bad dive OTU ? (%s)'
% self.profile2.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile2.model.ox_tox.cns * 100,
18.1490350581, 7, 'bad dive CNS ? (%s)'
% (self.profile2.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.airtank.used_gas, 2701.73162947, 7,
'bad used gas (%s)'
% self.airtank.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile2.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile2.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile2.no_flight_time()
self.assertEqual(no_flight_time, 18360, 'Bad no flight time: %s'
% no_flight_time)
def test_no_flight_wo_exc(self):
no_flight_time = self.profile2.no_flight_time_wo_exception()
self.assertEqual(no_flight_time, 18360, 'Bad no flight time: %s'
% no_flight_time)
def test_surfaceint(self):
self.assertEqual(self.profile2.get_surface_interval(),
' 60:00',
'wrong surface interval:%s'
% self.profile2.get_surface_interval())
class TestDiveAirDiveOutput3(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg3 = SegmentDive(55, 30 * 60, self.airdouble, 0)
self.profile3 = Dive([diveseg3], [self.airdouble])
self.profile3.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile3.output_segments[0]),
' DESCENT: at 55m for 2:45 [RT: 2:45], '
'on Air, SP:0.0, END:53m',
'bad segment (%s)'
% self.profile3.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile3.output_segments[1]),
' CONST: at 55m for 27:15 [RT: 30:00], '
'on Air, SP:0.0, END:53m',
'bad segment (%s)'
% self.profile3.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile3.output_segments[2]),
' ASCENT: at 30m for 2:30 [RT: 32:30], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile3.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile3.output_segments[3]),
' DECO: at 30m for 0:01 [RT: 32:31], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile3.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile3.output_segments[4]),
' DECO: at 27m for 1:15 [RT: 33:46], '
'on Air, SP:0.0, END:26m',
'bad segment (%s)'
% self.profile3.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile3.output_segments[5]),
' DECO: at 24m for 1:33 [RT: 35:19], '
'on Air, SP:0.0, END:23m',
'bad segment (%s)'
% self.profile3.output_segments[5])
def test_segment7(self):
self.assertEqual(str(self.profile3.output_segments[6]),
' DECO: at 21m for 2:37 [RT: 37:56], '
'on Air, SP:0.0, END:20m',
'bad segment (%s)'
% self.profile3.output_segments[6])
def test_segment8(self):
self.assertEqual(str(self.profile3.output_segments[7]),
' DECO: at 18m for 3:23 [RT: 41:19], '
'on Air, SP:0.0, END:17m',
'bad segment (%s)'
% self.profile3.output_segments[7])
def test_segment9(self):
self.assertEqual(str(self.profile3.output_segments[8]),
' DECO: at 15m for 5:26 [RT: 46:45], '
'on Air, SP:0.0, END:14m',
'bad segment (%s)'
% self.profile3.output_segments[8])
def test_segment10(self):
self.assertEqual(str(self.profile3.output_segments[9]),
' DECO: at 12m for 6:41 [RT: 53:26], '
'on Air, SP:0.0, END:11m',
'bad segment (%s)'
% self.profile3.output_segments[9])
def test_segment11(self):
self.assertEqual(str(self.profile3.output_segments[10]),
' DECO: at 9m for 11:01 [RT: 64:27], '
'on Air, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile3.output_segments[10])
def test_segment12(self):
self.assertEqual(str(self.profile3.output_segments[11]),
' DECO: at 6m for 21:36 [RT: 86:03], '
'on Air, SP:0.0, END:5m',
'bad segment (%s)'
% self.profile3.output_segments[11])
def test_segment13(self):
self.assertEqual(str(self.profile3.output_segments[12]),
' DECO: at 3m for 45:02 [RT:131:05], '
'on Air, SP:0.0, END:2m',
'bad segment (%s)'
% self.profile3.output_segments[12])
class TestDive(unittest.TestCase):
"""Generic Test Dive class."""
params = ((0, 0), )
def setUp(self):
"""Init of the tests."""
# temporary hack (tests):
super().setUp()
activate_debug_for_tests()
# settings.RUN_TIME = True
# settings.SURFACE_TEMP = 12
self.air12l = Tank(tank_vol=12.0, tank_pressure=200, tank_rule="10b")
self.airtank = Tank(tank_vol=18.0, tank_pressure=200, tank_rule="10b")
self.airtank12 = Tank(tank_vol=12.0,
tank_pressure=200,
tank_rule="10b")
self.airdouble = Tank(tank_vol=30.0,
tank_pressure=200,
tank_rule="10b") # bi15l 200b
self.txtank1 = Tank(0.21,
0.30,
tank_vol=20.0,
tank_pressure=200,
tank_rule="10b")
self.txtanknormodbl = Tank(0.21,
0.30,
tank_vol=30.0,
tank_pressure=200,
tank_rule="10b")
self.txhypo = Tank(0.10, 0.50, tank_vol=30.0,
tank_pressure=200) # 2x 15l
self.txtravel = Tank(0.21, 0.30, tank_vol=24.0,
tank_pressure=200) # 2x S80
self.ccair = Tank(tank_vol=3.0, tank_pressure=200, tank_rule='10b')
self.cctxhypo = Tank(0.10,
0.50,
tank_vol=3.0,
tank_pressure=200,
tank_rule='10b')
self.setpoint = 1.2
self.deco1 = Tank(0.8,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.deco2 = Tank(0.5,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.decoo2 = Tank(1.0,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.setpoint = 0.0
self.dive_tank = None
self.all_tanks = None
self.dive_segs = []
def do_dive(self):
"""do the actual dive.
self.params is in the form ((depth, time), (depth, time))
each couple of depth, time is a segment of the same dive.
"""
if not hasattr(self, 'name'):
self.name = '%s:%s' % (self.params[0][0], self.params[0][1])
for param in self.params:
self.dive_segs.append(
SegmentDive(param[0], param[1] * 60, self.dive_tank,
self.setpoint))
self.profile1 = Dive(self.dive_segs, self.all_tanks)
self.profile1.do_dive()
# self.write_details()
def do_repetitive_dive(self):
"""do the actual dive.
self.params is in the form:
((depth, time, interval), (depth, time, interval))
each couple of depth, time, interval is a full dive at the given depth
interval is done before the dive.
"""
if not hasattr(self, 'name'):
self.name = '%s:%s' % (self.params[0][0], self.params[0][1])
self.profiles = [] # repetive dive profiles.
for param in self.params:
if len(self.profiles) > 0:
self.profiles.append(
Dive([
SegmentDive(param[0], param[1] * 60, self.dive_tank,
self.setpoint)
], self.all_tanks, self.profiles[-1]))
self.profiles[-1].do_surface_interval(param[2] * 60)
else:
self.profiles.append(
Dive([
SegmentDive(param[0], param[1] * 60, self.dive_tank,
self.setpoint)
], self.all_tanks))
self.profiles[-1].do_dive()
self.profile1 = self.profiles[-1] # save last dive
# self.write_details()
def tearDown(self):
"""After tests."""
# settings.SURFACE_TEMP = 20
settings.RUN_TIME = True
@property
def details(self):
"""Output details of the dive.
:returns: string
:rtype: str
"""
return '"%s": ["%s", %f, %f, %d, %d, %f, %s], ' % (
self.name, seconds_to_mmss(self.profile1.run_time),
self.profile1.model.ox_tox.otu, self.profile1.model.ox_tox.cns *
100, self.profile1.no_flight_time(),
self.profile1.full_desat_time(), self.profile1.tanks[0].used_gas,
str(self.profile1.tanks[0].check_rule()).lower())
def print_details(self):
"""print detailed results."""
print(self.details)
def write_details(self):
"""write in /tmp/details.txt the detailed results."""
with open('/tmp/details.txt', 'a') as myfile:
myfile.write(self.details + '\n')
class TestDive(unittest.TestCase):
"""Generic Test Dive class."""
params = ((0, 0), )
def setUp(self):
"""Init of the tests."""
# temporary hack (tests):
super().setUp()
activate_debug_for_tests()
# settings.RUN_TIME = True
# settings.SURFACE_TEMP = 12
self.air12l = Tank(tank_vol=12.0,
tank_pressure=200,
tank_rule="10b")
self.airtank = Tank(tank_vol=18.0,
tank_pressure=200,
tank_rule="10b")
self.airtank12 = Tank(tank_vol=12.0,
tank_pressure=200,
tank_rule="10b")
self.airdouble = Tank(tank_vol=30.0,
tank_pressure=200,
tank_rule="10b") # bi15l 200b
self.txtank1 = Tank(0.21,
0.30,
tank_vol=20.0,
tank_pressure=200,
tank_rule="10b")
self.txtanknormodbl = Tank(0.21,
0.30,
tank_vol=30.0,
tank_pressure=200,
tank_rule="10b")
self.txhypo = Tank(0.10, 0.50,
tank_vol=30.0, tank_pressure=200) # 2x 15l
self.txtravel = Tank(0.21, 0.30, tank_vol=24.0,
tank_pressure=200) # 2x S80
self.ccair = Tank(tank_vol=3.0, tank_pressure=200, tank_rule='10b')
self.cctxhypo = Tank(0.10, 0.50, tank_vol=3.0, tank_pressure=200,
tank_rule='10b')
self.setpoint = 1.2
self.deco1 = Tank(0.8,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.deco2 = Tank(0.5,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.decoo2 = Tank(1.0,
0.0,
tank_vol=7.0,
tank_pressure=200,
tank_rule="10b")
self.setpoint = 0.0
self.dive_tank = None
self.all_tanks = None
self.dive_segs = []
def do_dive(self):
"""do the actual dive.
self.params is in the form ((depth, time), (depth, time))
each couple of depth, time is a segment of the same dive.
"""
if not hasattr(self, 'name'):
self.name = '%s:%s' % (self.params[0][0], self.params[0][1])
for param in self.params:
self.dive_segs.append(SegmentDive(param[0], param[1] * 60,
self.dive_tank, self.setpoint))
self.profile1 = Dive(self.dive_segs, self.all_tanks)
self.profile1.do_dive()
# self.write_details()
def do_repetitive_dive(self):
"""do the actual dive.
self.params is in the form:
((depth, time, interval), (depth, time, interval))
each couple of depth, time, interval is a full dive at the given depth
interval is done before the dive.
"""
if not hasattr(self, 'name'):
self.name = '%s:%s' % (self.params[0][0], self.params[0][1])
self.profiles = [] # repetive dive profiles.
for param in self.params:
if len(self.profiles) > 0:
self.profiles.append(
Dive([SegmentDive(param[0], param[1] * 60,
self.dive_tank, self.setpoint)],
self.all_tanks,
self.profiles[-1]))
self.profiles[-1].do_surface_interval(param[2] * 60)
else:
self.profiles.append(
Dive([SegmentDive(param[0], param[1] * 60,
self.dive_tank, self.setpoint)],
self.all_tanks))
self.profiles[-1].do_dive()
self.profile1 = self.profiles[-1] # save last dive
# self.write_details()
def tearDown(self):
"""After tests."""
# settings.SURFACE_TEMP = 20
settings.RUN_TIME = True
@property
def details(self):
"""Output details of the dive.
:returns: string
:rtype: str
"""
return '"%s": ["%s", %f, %f, %d, %d, %f, %s], ' % (
self.name,
seconds_to_mmss(self.profile1.run_time),
self.profile1.model.ox_tox.otu,
self.profile1.model.ox_tox.cns * 100,
self.profile1.no_flight_time(),
self.profile1.full_desat_time(),
self.profile1.tanks[0].used_gas,
str(self.profile1.tanks[0].check_rule()).lower())
def print_details(self):
"""print detailed results."""
print(self.details)
def write_details(self):
"""write in /tmp/details.txt the detailed results."""
with open('/tmp/details.txt', 'a') as myfile:
myfile.write(self.details + '\n')
class TestDiveAirDiveOutput1(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(30, 30 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg1], [self.airtank])
self.profile1.do_dive()
def test_segment1(self):
self.assertEqual(str(self.profile1.output_segments[0]),
' DESCENT: at 30m for 1:30 [RT: 1:30], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile1.output_segments[0])
def test_segment2(self):
self.assertEqual(str(self.profile1.output_segments[1]),
' CONST: at 30m for 28:30 [RT: 30:00], '
'on Air, SP:0.0, END:29m',
'bad segment (%s)'
% self.profile1.output_segments[1])
def test_segment3(self):
self.assertEqual(str(self.profile1.output_segments[2]),
' ASCENT: at 15m for 1:30 [RT: 31:30], '
'on Air, SP:0.0, END:14m',
'bad segment (%s)'
% self.profile1.output_segments[2])
def test_segment4(self):
self.assertEqual(str(self.profile1.output_segments[3]),
' DECO: at 15m for 0:01 [RT: 31:31], '
'on Air, SP:0.0, END:14m',
'bad segment (%s)'
% self.profile1.output_segments[3])
def test_segment5(self):
self.assertEqual(str(self.profile1.output_segments[4]),
' DECO: at 12m for 0:25 [RT: 31:56], '
'on Air, SP:0.0, END:11m',
'bad segment (%s)'
% self.profile1.output_segments[4])
def test_segment6(self):
self.assertEqual(str(self.profile1.output_segments[5]),
' DECO: at 9m for 2:42 [RT: 34:38], '
'on Air, SP:0.0, END:8m',
'bad segment (%s)'
% self.profile1.output_segments[5])
def test_segment7(self):
self.assertEqual(str(self.profile1.output_segments[6]),
' DECO: at 6m for 5:02 [RT: 39:40], '
'on Air, SP:0.0, END:5m',
'bad segment (%s)'
% self.profile1.output_segments[6])
def test_segment8(self):
self.assertEqual(str(self.profile1.output_segments[7]),
' DECO: at 3m for 8:44 [RT: 48:24], '
'on Air, SP:0.0, END:2m',
'bad segment (%s)'
% self.profile1.output_segments[7])
class TestRepetitiveDive3(TestDive):
def setUp(self):
TestDive.setUp(self)
diveseg1 = SegmentDive(40, 20 * 60, self.airtank12, 0)
self.profile0 = Dive([diveseg1], [self.airtank12])
self.profile0.do_dive()
diveseg2 = SegmentDive(30, 40 * 60, self.airtank, 0)
self.profile1 = Dive([diveseg2], [self.airtank], self.profile0)
self.profile1.do_surface_interval(30 * 60)
self.profile1.do_dive()
diveseg3 = SegmentDive(25, 35 * 60, self.airtank, 0)
self.profile2 = Dive([diveseg3], [self.airtank], self.profile1)
self.profile2.do_surface_interval(60 * 60)
# self.profile2.refill_tanks()
self.profile2.do_dive()
diveseg4 = SegmentDive(40, 20 * 60, self.airtank, 0)
self.profile3 = Dive([diveseg4], [self.airtank], self.profile2)
self.profile3.do_surface_interval(12 * 60 * 60)
# self.profile3.refill_tanks()
self.profile3.do_dive()
def test_rt(self):
assert seconds_to_mmss(self.profile3.run_time) == ' 38:36', \
'bad dive runtime ? (%s)' \
% seconds_to_mmss(self.profile3.run_time)
def test_otu(self):
self.assertAlmostEqual(self.profile3.model.ox_tox.otu,
86.8657204829, 7, 'bad dive OTU ? (%s)'
% self.profile3.model.ox_tox.otu)
def test_cns(self):
self.assertAlmostEqual(self.profile3.model.ox_tox.cns * 100,
7.75546902304, 7, 'bad dive CNS ? (%s)'
% (self.profile3.model.ox_tox.cns * 100))
def test_tank_cons(self):
self.assertAlmostEqual(self.airtank.used_gas, 2115.5196384, 7,
'bad used gas (%s)'
% self.airtank.used_gas)
def test_tank_cons_rule(self):
self.assertEqual(self.profile3.tanks[0].check_rule(), True,
'Wrong tank status : it should pass the remaining '
'gas rule test (result:%s)'
% self.profile2.tanks[0].check_rule())
def test_no_flight(self):
no_flight_time = self.profile3.no_flight_time()
self.assertEqual(no_flight_time, 1620, 'Bad no flight time: %s'
% no_flight_time)
def test_no_flight_wo_exc(self):
no_flight_time = self.profile3.no_flight_time_wo_exception()
self.assertEqual(no_flight_time, 1620, 'Bad no flight time: %s'
% no_flight_time)
def test_surfaceint(self):
self.assertEqual(self.profile3.get_surface_interval(),
'720:00',
'wrong surface interval:%s'
% self.profile3.get_surface_interval())
