def setUp(self):
optparser = BaseOptions()
optparser.parseOptions([
'dummyfile.xml',
'--debug=%s' % logging._levelNames[log.level].lower()
])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="testprimary" type="primary">
<vlan type="project" number="3003">
<network number="10.240.4.0/26" gateway="10.240.4.254"/>
</vlan>
<filer type="filer" name="filer01">
<vfiler>
<ipaddress type="primary" ip="10.240.4.1"/>
<aggregate name="aggr01" type="root"/>
<aggregate name="aggr02">
<volume>
<setref type="snapvault" name="default_primary"/>
</volume>
</aggregate>
</vfiler>
</filer>
<filer type="nearstore" name="nearstore01">
</filer>
</site>
<snapvaultset name="default_primary" targetfiler="nearstore01" targetaggregate="aggr02">
<snapvaultdef basename="sv_daily">
<snapschedule>1@1</snapschedule>
<snapvaultschedule>8@2</snapvaultschedule>
</snapvaultdef>
<snapvaultdef basename="sv_weekly">
<snapvaultschedule>13@sun@3</snapvaultschedule>
</snapvaultdef>
</snapvaultset>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.docgen = NetAppCommandsGenerator(self.project, self.defaults)
def load_testfile(self, filename):
"""
Load a test file for verifying functionality
"""
filepath = os.path.join(XML_FILE_LOCATION, filename)
tree = etree.parse(filepath)
self.project = Project()
self.project.configure_from_node(tree.getroot(), self.defaults, None)
self.docgenerator = NetAppCommandsGenerator(self.project, self.defaults)
def setUp(self):
optparser = BaseOptions()
optparser.parseOptions(['dummyfile.xml', '--debug=%s' % logging._levelNames[log.level].lower()])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="testprimary" type="primary">
<vlan type="project" number="3003">
<network number="10.240.4.0/26" gateway="10.240.4.254"/>
</vlan>
<filer type="filer" name="filer01">
<vfiler>
<ipaddress type="primary" ip="10.240.4.1"/>
<aggregate name="aggr01" type="root"/>
<aggregate name="aggr02">
<volume>
<setref type="snapvault" name="default_primary"/>
</volume>
</aggregate>
</vfiler>
</filer>
<filer type="nearstore" name="nearstore01">
</filer>
</site>
<snapvaultset name="default_primary" targetfiler="nearstore01" targetaggregate="aggr02">
<snapvaultdef basename="sv_daily">
<snapschedule>1@1</snapschedule>
<snapvaultschedule>8@2</snapvaultschedule>
</snapvaultdef>
<snapvaultdef basename="sv_weekly">
<snapvaultschedule>13@sun@3</snapvaultschedule>
</snapvaultdef>
</snapvaultset>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.docgen = NetAppCommandsGenerator(self.project, self.defaults)
class SnapVaultTest(unittest.TestCase):
"""
Test SnapVault configurations
"""
def setUp(self):
optparser = BaseOptions()
optparser.parseOptions(['dummyfile.xml', '--debug=%s' % logging._levelNames[log.level].lower()])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="testprimary" type="primary">
<vlan type="project" number="3003">
<network number="10.240.4.0/26" gateway="10.240.4.254"/>
</vlan>
<filer type="filer" name="filer01">
<vfiler>
<ipaddress type="primary" ip="10.240.4.1"/>
<aggregate name="aggr01" type="root"/>
<aggregate name="aggr02">
<volume>
<setref type="snapvault" name="default_primary"/>
</volume>
</aggregate>
</vfiler>
</filer>
<filer type="nearstore" name="nearstore01">
</filer>
</site>
<snapvaultset name="default_primary" targetfiler="nearstore01" targetaggregate="aggr02">
<snapvaultdef basename="sv_daily">
<snapschedule>1@1</snapschedule>
<snapvaultschedule>8@2</snapvaultschedule>
</snapvaultdef>
<snapvaultdef basename="sv_weekly">
<snapvaultschedule>13@sun@3</snapvaultschedule>
</snapvaultdef>
</snapvaultset>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.docgen = NetAppCommandsGenerator(self.project, self.defaults)
def test_aggregates_exist(self):
"""
Check that all the right aggregates exist
"""
aggregates = []
for filer in self.project.get_filers():
log.debug("adding aggregates on filer: %s: %s", filer, filer.get_aggregates())
aggregates.extend( filer.get_aggregates() )
pass
self.failUnlessEqual( len(aggregates), 3)
def test_volumes_exist(self):
"""
Test the snapvault volumes exist
"""
vols = self.project.get_volumes()
log.debug("vols: %s", [x for x in vols])
for vol in vols:
log.debug("snapvaults: %s", vol.snapvaults)
for snap in vol.snapvaults:
log.debug("snap: %s", snap)
pass
pass
filer = [ x for x in self.project.get_filers() if x.name == 'nearstore01'][0]
cmds = self.docgen.filer_snapvault_init_commands(filer)
log.debug("cmds: %s", cmds)
self.failUnlessEqual( len(cmds), 1 )
class SnapVaultTest(unittest.TestCase):
"""
Test SnapVault configurations
"""
def setUp(self):
optparser = BaseOptions()
optparser.parseOptions([
'dummyfile.xml',
'--debug=%s' % logging._levelNames[log.level].lower()
])
self.defaults = RawConfigParser()
configfiles = self.defaults.read(TESTCONF)
xmldata = """
<project name="testproj" code="01">
<site name="testprimary" type="primary">
<vlan type="project" number="3003">
<network number="10.240.4.0/26" gateway="10.240.4.254"/>
</vlan>
<filer type="filer" name="filer01">
<vfiler>
<ipaddress type="primary" ip="10.240.4.1"/>
<aggregate name="aggr01" type="root"/>
<aggregate name="aggr02">
<volume>
<setref type="snapvault" name="default_primary"/>
</volume>
</aggregate>
</vfiler>
</filer>
<filer type="nearstore" name="nearstore01">
</filer>
</site>
<snapvaultset name="default_primary" targetfiler="nearstore01" targetaggregate="aggr02">
<snapvaultdef basename="sv_daily">
<snapschedule>1@1</snapschedule>
<snapvaultschedule>8@2</snapvaultschedule>
</snapvaultdef>
<snapvaultdef basename="sv_weekly">
<snapvaultschedule>13@sun@3</snapvaultschedule>
</snapvaultdef>
</snapvaultset>
</project>
"""
node = etree.fromstring(xmldata)
self.project = Project()
self.project.configure_from_node(node, self.defaults, None)
self.docgen = NetAppCommandsGenerator(self.project, self.defaults)
def test_aggregates_exist(self):
"""
Check that all the right aggregates exist
"""
aggregates = []
for filer in self.project.get_filers():
log.debug("adding aggregates on filer: %s: %s", filer,
filer.get_aggregates())
aggregates.extend(filer.get_aggregates())
pass
self.failUnlessEqual(len(aggregates), 3)
def test_volumes_exist(self):
"""
Test the snapvault volumes exist
"""
vols = self.project.get_volumes()
log.debug("vols: %s", [x for x in vols])
for vol in vols:
log.debug("snapvaults: %s", vol.snapvaults)
for snap in vol.snapvaults:
log.debug("snap: %s", snap)
pass
pass
filer = [
x for x in self.project.get_filers() if x.name == 'nearstore01'
][0]
cmds = self.docgen.filer_snapvault_init_commands(filer)
log.debug("cmds: %s", cmds)
self.failUnlessEqual(len(cmds), 1)