def testNLM4LockAsync(t, env):
""" Asynchronously lock and unlock
FLAGS: nsv3 nlm
DEPEND: NLM0
CODE: NLM3
"""
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
event = threading.Event()
env.nlm.lock_msg(lock, 'cookie', False, True, False, 1, None, event)
if event.wait(10.0):
raise FailureException("NLM Async lock request timed out!")
else:
res = env.nlm.cb_server.get_cb_res('cookie')
if res:
nlm4check(res.stat, msg="Async LOCK")
else:
raise FailureException("NLM Async lock request timed out!")
env.nlm.unlock_msg(lock, 'cookie', None, event)
if event.wait(10.0):
raise FailureException("NLM Async unlock request timed out!")
else:
res = env.nlm.cb_server.get_cb_res('cookie')
if res:
nlm4check(res.stat, msg="Async UNLOCK")
else:
raise FailureException("NLM Async lock request timed out!")
def testNLM4Lock(t, env):
""" Lock and unlock a directory.
FLAGS: nfsv3 nlm
DEPEND: NLM0 NLM1
CODE: NLM2
"""
### Setup Phase ###
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="Initial TEST of unlocked dir")
### Execution Phase ###
res = env.nlm.lockk(lock, 'cookie', False, True, False, 1)
nlm4check(res.stat, msg="LOCK")
### Verification Phase ###
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="TEST of previously locked dir")
lock2 = nlm4_lock(t.name + 'bad', mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock2, 'badcookie', True)
nlm4check(res.stat,
msg="TEST of previously locked dir with bad creds",
stat=NLM4_DENIED)
res = env.nlm.unlock(lock, 'cookie')
nlm4check(res.stat, msg="UNLOCK")
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="Final TEST of unlocked dir")
def testNLM4LoopTestExclusive2(t, env):
""" Loop, sending NLM4TEST(Exclusive) messages. This is to find a specific
LK bug (related to SAS escalation bug 85961).
To run, use multiple clients to run this test against multiple nodes.
This test should be SAFE to run alongside itself or NLMLOOP1 or
NLMLOOPLOCK2.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLMLOOP2
"""
failed = False
count = 0
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
for i in range(10000):
# Do an EXCLUSIVE Test
res = env.nlm.test(lock, 'cookie', True)
if res.stat.stat != NLM4_GRANTED:
count = count + 1
if res.holder.exclusive:
print "(%d) res.stat = %s" % (i, nlm4_stats[res.stat.stat])
print res
failed = True
if count > 0:
print "Got %d shared BLOCKED messages (which may be a bug " \
"depending on what other tests are running)" % (count)
if failed:
t.fail("FAILED TestExclusive test")
def testNfs3Create_SizeSet(t, env):
""" Create a file with file_mode_set=1 and Size
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210, \
"CREATE - file %s (size=%d expected %d)" % \
(test_file, res.attributes.size, 9876543210))
def testNfs3FSInfo(t, env):
"""Retrieve the information of a file via the FSINFO rpc
FLAGS: nfsv3 fsinfo all
DEPEND:
CODE: FSINFO1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.fsinfo(test_file_fh)
### Verification Phase ###s
check(res, msg="FSINFO - file %s" % test_file)
def testNfs3SymLink(t, env):
""" Create a symlink to a file via the SYMLINK rpc
FLAGS: nfsv3 symlink all
DEPEND:
CODE: SLINK1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
test_link=t.name + "_link_1"
mount_path='/' + '/'.join(env.mc.opts.path[:-1])
link_path='/'.join([mount_path, test_dir, test_file])
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
# once bug 76982 is closed, drop the mode arguments
res = env.c1.symlink(test_dir_fh, test_link, mode_set=1, mode_val=0777,
size_set=1, size_val=len(link_path), data=link_path)
### Verification Phase ###
check(res, msg="SYMLINK - link %s" % test_link)
res = env.c1.lookup(test_dir_fh, test_link)
check(res, msg="LOOKUP - link %s" % test_link)
if res.status != NFS3_OK:
t.fail_support("SYMLINK FAILED: File [%] still exists." % test_link)
def testNfs3Rename(t, env):
""" Rename a file with the RENAME rpc
FLAGS: nfsv3 rename all
DEPEND:
CODE: RENAME1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
new_test_file = test_file + "_renamed"
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1, file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
### Execution Phase ###
res = env.c1.rename(test_dir_fh, test_file, test_dir_fh, new_test_file)
### Verification Phase ###
check_msg = "RENAME - file %s" % test_file
check(res, msg=check_msg)
res = env.c1.lookup(test_dir_fh, new_test_file)
check(res, msg="LOOKUP - file %s" % new_test_file)
if res.status != NFS3_OK:
t.fail_support("RENAME FAILED: File [%s] does not exist." % new_test_file)
def testNfs3PathConf(t, env):
"""Retrieve the pathconf information of a file via the PATHCONF rpc
FLAGS: nfsv3 pathconf all
DEPEND:
CODE: PTHCNF1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.pathconf(test_file_fh)
### Verification Phase ###
check(res, msg="PATHCONF - file %s" % test_file)
def testNfs3Lookup(t, env):
""" Get the handle for a file via the LOOKUP rpc
FLAGS: nfsv3 lookup all
DEPEND:
CODE: LOOKUP1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1, file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
if res.object.data != test_file_fh:
t.fail.support(
" ".join(
[
"LOOKUP - file handle returned [%s]" % res.object.data,
"is different than return of CREATE [%s]" % test_file_fh,
]
)
)
def testNfs3Access_Read(t, env):
""" Create a file, and check access permissions with ACCESS rpc
FLAGS: nfsv3 access all
DEPEND:
CODE: ACCESS1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.access(test_file_fh, ACCESS3_READ)
### Verification Phase ###
check(res, msg="ACCESS - file %s" % test_file)
if res.resok.access != ACCESS3_READ:
t.fail_support(" ".join([
"ACCESS - response: access bit mask [%s]" % res.resok.access,
"is not the correct value [%s]" % ACCESS3_READ
]))
def testNfs3Remove(t, env):
""" Create a file and remove it with the REMOVE rpc
FLAGS: nfsv3 remove all
DEPEND:
CODE: REMOVE1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
### Execution Phase ###
res = env.c1.remove(test_dir_fh, test_file)
### Verification Phase ###
check(res, msg="REMOVE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
if res.status == NFS3_OK:
t.fail_support("REMOVE FAILED: File [%] still exists." % test_file)
def testNfs3Access_Read(t, env):
""" Create a file, and check access permissions with ACCESS rpc
FLAGS: nfsv3 access all
DEPEND:
CODE: ACCESS1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.access(test_file_fh, ACCESS3_READ)
### Verification Phase ###
check(res, msg="ACCESS - file %s" % test_file)
if res.resok.access != ACCESS3_READ:
t.fail_support(" ".join([
"ACCESS - response: access bit mask [%s]" % res.resok.access,
"is not the correct value [%s]" % ACCESS3_READ]))
def testNfs3FSInfo(t, env):
"""Retrieve the information of a file via the FSINFO rpc
FLAGS: nfsv3 fsinfo all
DEPEND:
CODE: FSINFO1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.fsinfo(test_file_fh)
### Verification Phase ###s
check(res, msg="FSINFO - file %s" % test_file)
def testNfs3GetAttr(t, env):
""" Get the attributes of a file via the GETATTR rpc
FLAGS: nfsv3 getattr all
DEPEND:
CODE: GATTR1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.getattr(test_file_fh)
### Verification Phase ###
check(res, msg="GETATTR - %s" % test_file)
def testNfs3Create_UidAdminFail(t, env):
""" Create a file with uid_set=1 as second user
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE8
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c3.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
uid_set=1, uid_val=1234,
gid_set=1, gid_val=5678)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c3.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c3.getattr(test_file_fh)
checkvalid(res.attributes.uid == 10, \
"CREATE - file %s (uid=%d expected %d)" \
% (test_file, res.attributes.uid, 10))
checkvalid(res.attributes.gid == 10 or \
res.attributes.gid == 0, \
"CREATE - file %s (gid=%d expected %d)" \
% (test_file, res.attributes.gid, 10))
def testNfs3Link(t, env):
""" Create a hard-link to a file via LINK rpc
FLAGS: nfsv3 link all
DEPEND:
CODE: LINK1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
test_link=t.name + "_link_1"
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.link(test_file_fh, test_dir_fh, test_link)
### Verification Phase ###
check(res, msg="LINK - file %s" % test_file)
def testNLM4LoopTestExclusive(t, env):
""" Loop, sending NLM4TEST(Exclusive) messages. This is to find a specific
LK bug (related to SAS escalation bug 85961).
To run, use multiple clients to run this test against multiple nodes.
This test should be SAFE to run alongside itself or NLMLOOP2.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLMLOOP1
"""
failed = False
for i in range(10000):
# Do an EXCLUSIVE Test
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock, 'cookie', True)
if res.stat.stat != NLM4_GRANTED:
print "(%d) res.stat = %s" % (i, nlm4_stats[res.stat.stat])
print res
failed = True
if failed:
t.fail("FAILED TestExclusive test")
def testNfs3PathConf(t, env):
"""Retrieve the pathconf information of a file via the PATHCONF rpc
FLAGS: nfsv3 pathconf all
DEPEND:
CODE: PTHCNF1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.pathconf(test_file_fh)
### Verification Phase ###
check(res, msg="PATHCONF - file %s" % test_file)
def testNfs3Create_AllUnset(t, env):
""" Create a file with all _set bits = 0
Failure is expected due to bug #76982
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=0,
file_mode_val=0777)
#print "###DEBUG - CREATE_ALLUNSET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
def testNfs3Create_FileModeReset(t, env):
""" Create a file with one mode and then recreate it with another mode.
Expect the first mode to remain. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2R
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0321)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0654)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mode == 0321,
"CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0321))
def testNfs3Create_UidAdminFail(t, env):
""" Create a file with uid_set=1 as second user
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE8
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c3.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
uid_set=1, uid_val=1234,
gid_set=1, gid_val=5678)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c3.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c3.getattr(test_file_fh)
checkvalid(res.attributes.uid == 10, \
"CREATE - file %s (uid=%d expected %d)" \
% (test_file, res.attributes.uid, 10))
checkvalid(res.attributes.gid == 10 or \
res.attributes.gid == 0, \
"CREATE - file %s (gid=%d expected %d)" \
% (test_file, res.attributes.gid, 10))
def testNfs3Create_FileModeSet(t, env):
""" Create a file with file_mode_set=1
Use this as a work around until bug #76982 is closed
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(
res.attributes.mode == 0777, "CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0777))
def testNfs3Create_AtimeSet(t, env):
""" Create a file with atime_set=2
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE5
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777,
mtime_set=2, mtime_val=nfstime3(1234, 5678),
atime_set=2, atime_val=nfstime3(1234, 5678))
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.atime.seconds == 1234 and \
res.attributes.atime.nseconds == 5678, \
"CREATE - file %s (atime=%s expected %s)" \
% (test_file, str(res.attributes.atime), \
str(nfstime3(1234, 5678))))
def testNfs3Create_FileModeSet(t, env):
""" Create a file with file_mode_set=1
Use this as a work around until bug #76982 is closed
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mode == 0777,
"CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0777))
def testNfs3Create_EmptyFileName(t, env):
""" Create a file with all _set bits = 0
Failure is expected due to bug #76982
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE10
"""
### Setup Phase ###
test_file = b""
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=0,
file_mode_val=0777)
# print "###DEBUG - CREATE_ALLUNSET RESULTS:", res, "\n"
### Verification Phase ###
check(res, NFS3ERR_ACCES, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, NFS3ERR_ACCES, msg="LOOKUP - file %s" % test_file)
def testNfs3CommitLargeValuesNoWrite(t, env):
""" Tests COMMIT with large values. No reason to write beforehand. This
repros bug 77753.
FLAGS: nfsv3 commit all
DEPEND:
CODE: COMMIT3
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
offset = 3500000000
datalen = 4000000000
res = env.c1.commit(test_file_fh, offset, datalen)
check(res, msg="COMMIT of test file %s" % test_file)
def testNfs3Commit(t, env):
"""Commits changes to a file via the COMMIT rpc
FLAGS: nfsv3 commit all
DEPEND:
CODE: COMMIT1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
test_data = "Test String"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
res = env.c1.write(test_file_fh, offset=0, count=len(test_data), stable=FILE_SYNC, data=test_data)
check(res, msg="WRITE - file %s" % test_file)
### Execution Phase ###
res = env.c1.commit(test_file_fh)
### Verification Phase ###
check(res, msg="COMMIT of test file %s" % test_file)
def testNfs3CommitLargeValuesNoWrite(t, env):
""" Tests COMMIT with large values. No reason to write beforehand. This
repros bug 77753.
FLAGS: nfsv3 commit all
DEPEND:
CODE: COMMIT3
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
offset = 3500000000
datalen = 4000000000
res = env.c1.commit(test_file_fh, offset, datalen)
check(res, msg="COMMIT of test file %s" % test_file)
def testNfs3Rename(t, env):
""" Rename a file with the RENAME rpc
FLAGS: nfsv3 rename all
DEPEND:
CODE: RENAME1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
new_test_file = test_file + "_renamed"
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
### Execution Phase ###
res = env.c1.rename(test_dir_fh, test_file, test_dir_fh, new_test_file)
### Verification Phase ###
check_msg = "RENAME - file %s" % test_file
check(res, msg=check_msg)
res = env.c1.lookup(test_dir_fh, new_test_file)
check(res, msg="LOOKUP - file %s" % new_test_file)
if res.status != NFS3_OK:
t.fail_support("RENAME FAILED: File [%s] does not exist." \
% new_test_file)
def testNfs3ACL_BasicACLv3Operations(t, env):
""" Create a file with all _set bits = 0
Failure is expected due to bug #76982
FLAGS: nfsv3 acl all
DEPEND:
CODE: POSIXACL01
"""
### Setup Phase ###
test_file = b"_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=0,
file_mode_val=0777)
test_file_fh = res.resok.obj.handle.data
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
env.acl_c3.acl_null()
env.acl_c3.acl_setacl(test_file_fh, [(0x1, 1000, 0o777), (0x2, 2000, 0o777), (0x3, 0, 0o777)],
mask=0x0)
res = env.acl_c3.acl_getacl(test_file_fh, 0x1)
print "###DEBUG - GETACL3 RESULTS:", res, "\n"
try:
res = env.acl_c3.acl_getxattrdir(test_file_fh, True)
except Exception as e:
print("{}".format(e))
def testNLM4LoopTestExclusive(t,env):
""" Loop, sending NLM4TEST(Exclusive) messages. This is to find a specific
LK bug (related to SAS escalation bug 85961).
To run, use multiple clients to run this test against multiple nodes.
This test should be SAFE to run alongside itself or NLMLOOP2.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLMLOOP1
"""
failed = False
for i in range(10000):
# Do an EXCLUSIVE Test
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock, 'cookie', True)
if res.stat.stat != NLM4_GRANTED:
print "(%d) res.stat = %s" % (i, nlm4_stats[res.stat.stat])
print res
failed = True
if failed:
t.fail("FAILED TestExclusive test")
def testNfs3Remove(t, env):
""" Create a file and remove it with the REMOVE rpc
FLAGS: nfsv3 remove all
DEPEND:
CODE: REMOVE1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
### Execution Phase ###
res = env.c1.remove(test_dir_fh, test_file)
### Verification Phase ###
check(res, msg="REMOVE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
if res.status == NFS3_OK:
t.fail_support("REMOVE FAILED: File [%] still exists." % test_file)
def testNfs3Commit(t, env):
"""Commits changes to a file via the COMMIT rpc
FLAGS: nfsv3 commit all
DEPEND:
CODE: COMMIT1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
test_data = "Test String"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
res = env.c1.write(test_file_fh,
offset=0,
count=len(test_data),
stable=FILE_SYNC,
data=test_data)
check(res, msg="WRITE - file %s" % test_file)
### Execution Phase ###
res = env.c1.commit(test_file_fh)
### Verification Phase ###
check(res, msg="COMMIT of test file %s" % test_file)
def testNLM4Lock(t,env):
""" Lock and unlock a directory.
FLAGS: nfsv3 nlm
DEPEND: NLM0 NLM1
CODE: NLM2
"""
### Setup Phase ###
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="Initial TEST of unlocked dir")
### Execution Phase ###
res = env.nlm.lockk(lock, 'cookie', False, True, False, 1)
nlm4check(res.stat,msg="LOCK")
### Verification Phase ###
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="TEST of previously locked dir")
lock2 = nlm4_lock(t.name + 'bad', mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.test(lock2, 'badcookie', True)
nlm4check(res.stat, msg="TEST of previously locked dir with bad creds", stat=NLM4_DENIED)
res = env.nlm.unlock(lock, 'cookie')
nlm4check(res.stat,msg="UNLOCK")
res = env.nlm.test(lock, 'cookie', True)
nlm4check(res.stat, msg="Final TEST of unlocked dir")
def testNfs3Create_SizeSet(t, env):
""" Create a file with file_mode_set=1 and Size
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777,
size_set=1,
size_val=9876543210)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210, \
"CREATE - file %s (size=%d expected %d)" % \
(test_file, res.attributes.size, 9876543210))
def testNLM4LockAsync(t,env):
""" Asynchronously lock and unlock
FLAGS: nsv3 nlm
DEPEND: NLM0
CODE: NLM3
"""
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
event = threading.Event()
env.nlm.lock_msg(lock, 'cookie', False, True, False, 1, None, event)
if event.wait(10.0):
raise FailureException("NLM Async lock request timed out!")
else:
res = env.nlm.cb_server.get_cb_res('cookie')
if res:
nlm4check(res.stat, msg="Async LOCK")
else:
raise FailureException("NLM Async lock request timed out!")
env.nlm.unlock_msg(lock, 'cookie', None, event)
if event.wait(10.0):
raise FailureException("NLM Async unlock request timed out!")
else:
res = env.nlm.cb_server.get_cb_res('cookie')
if res:
nlm4check(res.stat, msg="Async UNLOCK")
else:
raise FailureException("NLM Async lock request timed out!")
def testNfs3Lookup(t, env):
""" Get the handle for a file via the LOOKUP rpc
FLAGS: nfsv3 lookup all
DEPEND:
CODE: LOOKUP1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
if res.object.data != test_file_fh:
t.fail.support(" ".join([
"LOOKUP - file handle returned [%s]" % res.object.data,
"is different than return of CREATE [%s]" % test_file_fh
]))
def testNLM4LoopTestExclusive2(t,env):
""" Loop, sending NLM4TEST(Exclusive) messages. This is to find a specific
LK bug (related to SAS escalation bug 85961).
To run, use multiple clients to run this test against multiple nodes.
This test should be SAFE to run alongside itself or NLMLOOP1 or
NLMLOOPLOCK2.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLMLOOP2
"""
failed = False
count = 0
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
for i in range(10000):
# Do an EXCLUSIVE Test
res = env.nlm.test(lock, 'cookie', True)
if res.stat.stat != NLM4_GRANTED:
count = count + 1
if res.holder.exclusive:
print "(%d) res.stat = %s" % (i, nlm4_stats[res.stat.stat])
print res
failed = True
if count > 0:
print "Got %d shared BLOCKED messages (which may be a bug " \
"depending on what other tests are running)" % (count)
if failed:
t.fail("FAILED TestExclusive test")
def testNfs3MkNod(t, env):
"""Create a special device file via the MKNOD rpc.
... requires nfs root user to be mapped to root instead of nobody
FLAGS: nfsv3 mknod all
DEPEND:
CODE: MKNOD1
"""
### Setup Phase ###
test_dir=t.name + "_dir_1"
type_list = [NF3BLK, NF3CHR, NF3SOCK, NF3FIFO]
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR of new test dir %s" % test_dir)
res = env.c1.lookup(mnt_fh, test_dir)
check(res, msg="LOOKUP of new dir %s" % test_dir)
test_dir_fh = res.object.data
### Execution Phase ###
for type in type_list:
# remove mode_set and _val args once bug #76982 is closed
test_file = "".join([t.name, "_", ftype3[type]])
#test_file = "".join([mount_path, "/", test_dir, "/", t.name, "_", ftype3[type], "/"])
res = env.c1.mknod(test_dir_fh, test_file, type, mode_set=1, mode_val=0777)
#res = env.c1.mknod(mnt_fh, test_file, type, mode_set=1, mode_val=0777)
check(res, msg="MKNOD of test file %s" % test_file)
### Verification Phase ###
for type in type_list:
test_file = "".join([t.name, "_", ftype3[type]])
res = env.c1.lookup(test_dir_fh, test_file)
#res = env.c1.lookup(mnt_fh, test_file)
check(res, msg="LOOKUP test file %s" % test_file)
def testNfs3Create_FileModeReset(t, env):
""" Create a file with one mode and then recreate it with another mode.
Expect the first mode to remain. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE2R
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0321)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0654)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mode == 0321,
"CREATE - file %s (mode=%d expected %d)" %
(test_file, res.attributes.mode, 0321))
def testNfs3Create_MtimeSet(t, env):
""" Create a file with mtime_set=2
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE4
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777,
mtime_set=2,
mtime_val=nfstime3(1234, 5678))
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
check(res, msg="CREATE - file %s" % test_file)
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.mtime.seconds == 1234 and \
res.attributes.mtime.nseconds == 5678, \
"CREATE - file %s (mtime=%s expected %s)" \
% (test_file, str(res.attributes.mtime), \
str(nfstime3(1234, 5678))))
def testNfs3GetAttr(t, env):
""" Get the attributes of a file via the GETATTR rpc
FLAGS: nfsv3 getattr all
DEPEND:
CODE: GATTR1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.getattr(test_file_fh)
### Verification Phase ###
check(res, msg="GETATTR - %s" % test_file)
def testNfs3ReadLink(t, env):
""" Create a symlink to a file and read the link via the READLINK rpc
FLAGS: nfsv3 readlink all
DEPEND:
CODE: RDLINK1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
test_link = t.name + "_link_1"
mount_path = '/' + '/'.join(env.mc.opts.path[:-1])
link_path = '/'.join([mount_path, test_dir, test_file])
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
res = env.c1.symlink(test_dir_fh,
test_link,
mode_set=1,
mode_val=0777,
size_set=1,
size_val=len(link_path),
data=link_path)
check(res, msg="SYMLINK - link %s" % test_link)
res = env.c1.lookup(test_dir_fh, test_link)
check(res, msg="LOOKUP of test symlink %s" % test_link)
test_link_fh = res.object.data
### Execution Phase ###
res = env.c1.readlink(test_link_fh)
### Verification Phase ###
check(res, msg="READLINK on existing file %s" % test_file)
if res.resok.type != NF3LNK:
t.fail_support(" ".join([
"READLINK - data type returned [%s]" % res.resok.type,
"does not match expected NF3LNK[%s]." % NF3LNK
]))
if res.resok.data != link_path:
t.fail_support(" ".join([
"READLINK - data returned [%s]" % res.resok.data,
"does not match expected [%s]." % link_path
]))
if len(res.resok.data) != len(link_path):
t.fail_support(" ".join([
"READLINK - bytes returned [%d]" % len(res.resok.data),
"does not match expected bytes [%d]." % len(link_path)
]))
def testNfs3ReadDirPlus(t, env):
""" Retrieve entries sequentially from a dir via the READDIRPLUS rpc
FLAGS: nfsv3 readdirplus all
DEPEND:
CODE: RDDIRPLS1
#ToDo: switch depend to create1 once bug #76982 is closed
"""
### Setup Phase ###
test_file = t.name + "_file_1"
created_files = []
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
cookie = 0
cookie_verf = 0
dir_count = 150
max_count = 1200
test_file_count = 15
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
for i in range(1, test_file_count + 1):
temp_name = "%s_%s" % (test_file, i)
res = env.c1.create(test_dir_fh, temp_name, file_mode_set=1, file_mode_val=0777)
check(res, msg="CREATE - file %s" % temp_name)
created_files.append(temp_name)
### Execution Phase ###
entries = env.c1.do_readdirplus(test_dir_fh, cookie, cookie_verf, dir_count, max_count)
### Verification Phase ###
# Add 2 to the count to account for "." and ".." entries
if len(entries) != test_file_count + 2:
t.fail_support(
" ".join(
[
"READDIR - number of dir entries returned [%s]" % len(entries),
"does not match number created [%s]" % (test_file_count + 2),
]
)
)
for e in entries:
if e.name not in created_files:
if e.name != "." and e.name != "..":
t.fail_support(
" ".join(
[
"READDIR - returned entry name [%s]" % e.name,
"was not in the list of created files [%s]" % ("\n".join(created_files)),
]
)
)
def testNfs3CommitLarge(t, env):
""" Tests COMMIT with large amounts of writes beforehand. Dial up the
datalen for an even larger filesize.
FLAGS: nfsv3 commit all
DEPEND:
CODE: COMMIT2
"""
### Setup Phase ###
datalen = 512 * 1024 * 1024
writesize = 512 * 1024
test_data = "a" * writesize
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
# WRITE in a loop until we write datalen
offset = 0
wlen = writesize
while (offset < datalen):
if (datalen - offset < writesize):
wlen = datalen - offset
test_data = "a" * wlen
print "Writing offset = %ld, length = %d" % (offset, wlen)
res = env.c1.write(test_file_fh,
offset=offset,
count=wlen,
stable=UNSTABLE,
data=test_data)
check(res,
msg="WRITE - file %s - offset=%ld - len=%d" %
(test_file, offset, wlen))
offset = offset + wlen
### Execution Phase ###
offset = 0
print "Committing %d data at offset %d" % (datalen, offset)
res = env.c1.commit(test_file_fh, offset, datalen)
### Verification Phase ###
check(res, msg="COMMIT of test file %s" % test_file)
def testNfs3Null(t, env):
""" NFSPROC3_NULL
FLAGS: nfsv3 all
DEPEND:
CODE: NULL1
"""
### Setup Phase ###
mnt_fh = homedir_fh(env.mc, env.c1)
### Execution Phase ###
res = env.c1.null()
def testNfs3Null(t, env):
""" NFSPROC3_NULL
FLAGS: nfsv3 all
DEPEND:
CODE: NULL1
"""
### Setup Phase ###
mnt_fh = homedir_fh(env.mc, env.c1)
### Execution Phase ###
res = env.c1.null()
def testNfs3Create_Exclusive(t, env):
""" Create a file in exclusive mode
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE9
"""
### Setup Phase ###
#verf = '12345678'
verf = str(0x3B9ACA01)
wrongverf = '87654321'
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="CREATE - file %s" % test_file)
fh1 = res.resok.obj.handle.data
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="2nd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 2nd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
# Create the file again, should return an error
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=wrongverf)
check(res, NFS3ERR_EXIST, msg="3rd CREATE with wrong verifier")
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="3rd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 3rd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
def testNfs3Create_Exclusive(t, env):
""" Create a file in exclusive mode
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE9
"""
### Setup Phase ###
#verf = '12345678'
verf = str(0x3B9ACA01)
wrongverf = '87654321'
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="CREATE - file %s" % test_file)
fh1 = res.resok.obj.handle.data
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="2nd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 2nd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
# Create the file again, should return an error
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=wrongverf)
check(res, NFS3ERR_EXIST, msg="3rd CREATE with wrong verifier")
# Create with same verifier should return same object
res = env.c1.create(test_dir_fh, test_file,
nfs3_mode=EXCLUSIVE, exclusive_verf=verf)
check(res, msg="3rd CREATE with correct verifier")
fh2 = res.resok.obj.handle.data
# Compare file handles
checkvalid(fh1 == fh2, "Filehandle changed on 3rd exclusive create"
"(fh1 = %s, fh2 = %s)" % (fh1, fh2))
def testNfs3ReadDirPlus(t, env):
""" Retrieve entries sequentially from a dir via the READDIRPLUS rpc
FLAGS: nfsv3 readdirplus all
DEPEND:
CODE: RDDIRPLS1
#ToDo: switch depend to create1 once bug #76982 is closed
"""
### Setup Phase ###
test_file = t.name + "_file_1"
created_files = []
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
cookie = 0
cookie_verf = 0
dir_count = 150
max_count = 1200
test_file_count = 15
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
for i in range(1, test_file_count + 1):
temp_name = "%s_%s" % (test_file, i)
res = env.c1.create(test_dir_fh,
temp_name,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % temp_name)
created_files.append(temp_name)
### Execution Phase ###
entries = env.c1.do_readdirplus(test_dir_fh, cookie, cookie_verf,
dir_count, max_count)
### Verification Phase ###
# Add 2 to the count to account for "." and ".." entries
if len(entries) != test_file_count + 2:
t.fail_support(" ".join([
"READDIR - number of dir entries returned [%s]" % len(entries),
"does not match number created [%s]" % (test_file_count + 2)
]))
for e in entries:
if e.name not in created_files:
if e.name != "." and e.name != "..":
t.fail_support(" ".join([
"READDIR - returned entry name [%s]" % e.name,
"was not in the list of created files [%s]" %\
("\n".join(created_files))
]))
def testNfs3SetAttr(t, env):
""" Set the attributes of a file via the SETATTR rpc
and verify they change correctly
FLAGS: nfsv3 setattr all
DEPEND:
CODE: SATTR1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
old_mode=0777
new_mode=0755
old_size=111
new_size=333
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file,
file_mode_set=1, file_mode_val=old_mode,
size_set=1, size_val=old_size)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
res = env.c1.getattr(test_file_fh)
check(res, msg="GETATTR - file %s" % test_file)
if res.attributes.size != old_size:
t.fail_support(" ".join([
"GETATTR - Initial file size [%s]" % res.attributes.size,
"does not match specified value [%s]" % old_size]))
if res.attributes.mode != old_mode:
t.fail_support(" ".join([
"GETATTR - Initial file mode [%s]" % res.attributes.mode,
"does not match specified value [%s]" % old_mode]))
### Execution Phase ###
res = env.c1.setattr(test_file_fh,
mode_set=1, mode_val=new_mode,
size_set=1, size_val=new_size)
### Verification Phase ###
check(res, msg="SETATTR - file %s" % test_file)
if res.wcc.after.attributes.mode != new_mode:
t.fail_support(" ".join([
"SETATTR - mode value [%s]" % res.wcc.after.attributes.mode,
"does not match specified value [%s]" % new_mode]))
if res.wcc.after.attributes.size != new_size:
t.fail_support(" ".join([
"SETATTR - size attr value [%s]" % res.wcc.after.attributes.size,
"does not match specified value [%s]" % new_size]))
def testNfs3Write(t, env):
""" Write test data into a file via WRITE rpc,
read the file and verify the output
FLAGS: nfsv3 write all
DEPEND:
CODE: WRITE1
"""
### Setup Phase ###
test_file = t.name + "_file_1"
test_dir = t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
test_data = "Test String"
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh,
test_file,
file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.write(test_file_fh,
offset=0,
count=len(test_data),
stable=FILE_SYNC,
data=test_data)
### Verification Phase ###
check(res, msg="WRITE - file %s" % test_file)
if res.resok.count != len(test_data):
t.fail_support(" ".join([
"WRITE - response: data returned [%d]" % res.resok.count,
"bytes of data written. [%d] bytes expected" % len(test_data)
]))
res = env.c1.read(test_file_fh, offset=0, count=len(test_data))
check(res, msg="READ - file %s" % test_file)
if res.resok.data != test_data:
t.fail.support(" ".join([
"WRITE - operation returned [%s]." % res.resok.data,
"[%s] expected." % test_data
]))
if res.resok.count != len(test_data):
t.fail_support(" ".join([
"WRITE - operation returned [%d] bytes." % res.resok.count,
"[%d] bytes expected." % len(test_data)
]))
def testNfs3Create_SizeTruncate(t, env):
""" Create a file with a specified size and then truncate it with
another create. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3T
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=1234567890)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 9876543210))
### Execution Phase 2 ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=0)
check(res, msg="CREATE(3) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase 2 ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 0,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 0))
def testNfs3Create_SizeTruncate(t, env):
""" Create a file with a specified size and then truncate it with
another create. (Unchecked is the default creation type.)
FLAGS: nfsv3 create all
DEPEND:
CODE: CREATE3T
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - test dir %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
### Execution Phase ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=9876543210)
check(res, msg="CREATE(1) - file %s" % test_file)
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=1234567890)
check(res, msg="CREATE(2) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 9876543210,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 9876543210))
### Execution Phase 2 ###
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777, size_set=1, size_val=0)
check(res, msg="CREATE(3) - file %s" % test_file)
test_file_fh = res.resok.obj.handle.data
#print "###DEBUG - CREATE_FILEMODESET RESULTS:", res, "\n"
### Verification Phase 2 ###
res = env.c1.lookup(test_dir_fh, test_file)
check(res, msg="LOOKUP - file %s" % test_file)
res = env.c1.getattr(test_file_fh)
checkvalid(res.attributes.size == 0,
"CREATE - file %s (size=%d expected %d)" %
(test_file, res.attributes.size, 0))
def testNLM4Cancel(t, env):
""" Send LOCK and then CANCEL RPC.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLMCANCEL1
"""
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
res = env.nlm.lockk(lock, 'cookie', True)
lock = env.nlm.cancel(lock,
netobj_cookie='cookie123',
block=True,
exclusive=True)
def testNLMathon(t, env):
""" NLM it up!
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLM4
"""
print "Running NLM Stress..."
mnt_fh = homedir_fh(env.mc, env.c1)
lock = nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
threads = []
for i in range(0,1000):
threads.append(threading.Thread(target=runRandomProc,args=(lock,i,env)))
threads[i].start()
for i in range(0,1000):
threads[i].join()
def testNfs3ReadLink(t, env):
""" Create a symlink to a file and read the link via the READLINK rpc
FLAGS: nfsv3 readlink all
DEPEND:
CODE: RDLINK1
"""
### Setup Phase ###
test_file=t.name + "_file_1"
test_dir=t.name + "_dir_1"
test_link=t.name + "_link_1"
mount_path='/' + '/'.join(env.mc.opts.path[:-1])
link_path='/'.join([mount_path, test_dir, test_file])
mnt_fh = homedir_fh(env.mc, env.c1)
res = env.c1.mkdir(mnt_fh, test_dir, dir_mode_set=1, dir_mode_val=0777)
check(res, msg="MKDIR - %s" % test_dir)
test_dir_fh = res.resok.obj.handle.data
res = env.c1.create(test_dir_fh, test_file, file_mode_set=1,
file_mode_val=0777)
check(res, msg="CREATE - file %s " % test_file)
res = env.c1.symlink(test_dir_fh, test_link, mode_set=1, mode_val=0777,
size_set=1, size_val=len(link_path), data=link_path)
check(res, msg="SYMLINK - link %s" % test_link)
res = env.c1.lookup(test_dir_fh, test_link)
check(res, msg="LOOKUP of test symlink %s" % test_link)
test_link_fh = res.object.data
### Execution Phase ###
res = env.c1.readlink(test_link_fh)
### Verification Phase ###
check(res, msg="READLINK on existing file %s" % test_file)
if res.resok.type != NF3LNK:
t.fail_support(" ".join([
"READLINK - data type returned [%s]" % res.resok.type,
"does not match expected NF3LNK[%s]." % NF3LNK]))
if res.resok.data != link_path:
t.fail_support(" ".join([
"READLINK - data returned [%s]" % res.resok.data,
"does not match expected [%s]." % link_path]))
if len(res.resok.data) != len(link_path):
t.fail_support(" ".join([
"READLINK - bytes returned [%d]" % len(res.resok.data),
"does not match expected bytes [%d]." % len(link_path)]))
def testNLM4Test(t, env):
""" Test the NLM TEST op.
It's a test to test TEST.
FLAGS: nfsv3 nlm
DEPEND: NLM0
CODE: NLM1
"""
### Setup Phase ###
mnt_fh = homedir_fh(env.mc, env.c1)
### Execution Phase ###
res = env.nlm.test(nlm4_lock(t.name, mnt_fh, 'owner', env.pid, 0, 1024)
,'cookie', True)
### Verification Phase ###
nlm4check(res.stat, msg="TEST")
