def test_device_command_reboot():
api_instance = esperclient.CommandsApi(esperclient.ApiClient(configuration))
command = esperclient.CommandRequest(command='REBOOT')
try:
api_response = api_instance.run_command(enterprise_id, device_id, command)
#print(api_response)
except ApiException as e:
print("Exception when calling CommandsApi->run_command: %s\n" % e)
assert api_response.id is not None, "Id cannot be None"
assert api_response.state == 'Command Initiated', "Command could not be initiated"
def test_device_command_status_get():
api_instance = esperclient.CommandsApi(esperclient.ApiClient(configuration))
command_id = '0fd65c8a-a015-4695-a7b6-6f79c75887df' # replace with valid uuid
device_id = 'cd2d9e4b-953c-482f-abbc-168910851bad' # replace with valid uuid
try:
api_response = api_instance.get_command(command_id, device_id, enterprise_id)
#print(api_response)
except ApiException as e:
print("Exception when calling CommandsApi->get_command: %s\n" % e)
assert api_response.id is not None, "Id cannot be None"
def test_device_command_settings_change():
api_instance = esperclient.CommandsApi(esperclient.ApiClient(configuration))
command_args = esperclient.CommandArgs(brightness_value=100)
command = esperclient.CommandRequest(command='SET_BRIGHTNESS_SCALE', command_args=command_args)
try:
api_response = api_instance.run_command(enterprise_id, device_id, command)
# print(api_response)
except ApiException as e:
print("Exception when calling CommandsApi->run_command: %s\n" % e)
assert api_response.id is not None, "Id cannot be None"
assert api_response.state == 'Command Initiated', "Command could not be initiated"
def test_device_app_deploy():
api_instance = esperclient.CommandsApi(esperclient.ApiClient(configuration))
command_args = esperclient.CommandArgs(app_version='2f81b955-4a30-4b1b-a99f-b4016ba24854') # replace with valid uuid
command = esperclient.CommandRequest(command='INSTALL', command_args=command_args)
try:
api_response = api_instance.run_command(enterprise_id, device_id, command)
#print(api_response)
except ApiException as e:
print("Exception when calling CommandsApi->run_command: %s\n" % e)
assert api_response.id is not None, "Id cannot be None"
assert api_response.state == 'Command Initiated', "Command could not be initiated"
def run_whitelist_command(device, package_name):
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs(package_name=package_name)
command = esperclient.CommandRequest(command='ADD_TO_WHITELIST',
command_args=command_args)
try:
api_response = api_instance.run_command(ENTERPRISE_ID, device.id,
command)
if api_response.id is not None:
print('Whitelist command fired successfully on {} for {}'.format(
device.device_name, package_name))
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
def run_uninstall_command(device, package_name, app_id):
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs(package_name=package_name,
app_version=app_id)
command = esperclient.CommandRequest(command='UNINSTALL',
command_args=command_args)
try:
api_response = api_instance.run_command(ENTERPRISE_ID, device.id,
command)
if api_response.id is not None:
print('Uninstall command fired successfully on ' + device.device_name +\
' for ' + package_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
def change_device_settings(command, value):
if command == "brightness":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
if int(value) > 100 or int(value) < 0:
print("Brightness value has to be in between 0-100")
sys.exit(1)
command_args = esperclient.CommandArgs(brightness_value=int(value))
command = esperclient.CommandRequest(
command='SET_BRIGHTNESS_SCALE', command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('brightness command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "alarm_volume":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
if int(value) > 100 or int(value) < 0:
print("Alarm volume value has to be in between 0-100")
sys.exit(1)
command_args = esperclient.CommandArgs(volume_level=int(value),
stream=int(2))
command = esperclient.CommandRequest(command='SET_STREAM_VOLUME',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print(
'alarm volume change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "ring_volume":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
if int(value) > 100 or int(value) < 0:
print("Ring volume value has to be in between 0-100")
sys.exit(1)
command_args = esperclient.CommandArgs(volume_level=int(value),
stream=int(0))
command = esperclient.CommandRequest(command='SET_STREAM_VOLUME',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('Ring volume change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "notification_volume":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
if int(value) > 100 or int(value) < 0:
print("Notification volume value has to be in between 0-100")
sys.exit(1)
command_args = esperclient.CommandArgs(volume_level=int(value),
stream=int(1))
command = esperclient.CommandRequest(command='SET_STREAM_VOLUME',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print(
'Notification volume change command fired successfully on '
+ device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "music_volume":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
if int(value) > 100 or int(value) < 0:
print("Music volume value has to be in between 0-100")
sys.exit(1)
command_args = esperclient.CommandArgs(volume_level=int(value),
stream=int(3))
command = esperclient.CommandRequest(command='SET_STREAM_VOLUME',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print(
'Music volume change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "bluetooth":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs(bluetooth_state=value)
command = esperclient.CommandRequest(command='SET_BLUETOOTH_STATE',
command_args=command_args)
# print(command)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('Bluetooth change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "wifi":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs(wifi_state=value)
command = esperclient.CommandRequest(command='SET_WIFI_STATE',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('Wifi change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "gps":
for device in ACTIVE_DEVICE_LIST:
if value == "off":
state = 0
elif value == "sensors_only":
state = 1
elif value == "battery_saving":
state = 2
elif value == "high":
state = 3
else:
print(
"Invalid GPS state: Valid states are: off, high, sensors_only"
"and battery_saving")
sys.exit(1)
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs(gps_state=int(state))
command = esperclient.CommandRequest(command='SET_GPS_STATE',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('GPS change command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "ping":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs()
command = esperclient.CommandRequest(command='UPDATE_HEARTBEAT',
command_args=command_args)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('UPDATE_HEARTBEAT command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
elif command == "reboot":
for device in ACTIVE_DEVICE_LIST:
api_instance = esperclient.CommandsApi(
esperclient.ApiClient(CONFIGURATION))
command_args = esperclient.CommandArgs()
command = esperclient.CommandRequest(command='REBOOT',
command_args=command_args)
# print(command)
try:
api_response = api_instance.run_command(
ENTERPRISE_ID, device.id, command)
if api_response.id is not None:
print('Reboot command fired successfully on ' +
device.device_name)
except ApiException as api_exception:
print("Exception when calling CommandsApi->run_command: %s\n" %
api_exception)
def get_command_api_client(self):
return client.CommandsApi(client.ApiClient(self.config))