import esphomeyaml.config_validation as cv
from esphomeyaml.components import binary_sensor
from esphomeyaml.components.esp32_ble_tracker import ESP32BLETracker
from esphomeyaml.const import CONF_MAC_ADDRESS, CONF_NAME, ESP_PLATFORM_ESP32
from esphomeyaml.core import HexInt
from esphomeyaml.helpers import ArrayInitializer, get_variable
ESP_PLATFORMS = [ESP_PLATFORM_ESP32]
DEPENDENCIES = ['esp32_ble_tracker']
CONF_ESP32_BLE_ID = 'esp32_ble_id'
PLATFORM_SCHEMA = cv.nameable(
binary_sensor.BINARY_SENSOR_PLATFORM_SCHEMA.extend({
vol.Required(CONF_MAC_ADDRESS):
cv.mac_address,
cv.GenerateID(CONF_ESP32_BLE_ID):
cv.use_variable_id(ESP32BLETracker)
}))
def to_code(config):
hub = None
for hub in get_variable(config[CONF_ESP32_BLE_ID]):
yield
addr = [HexInt(i) for i in config[CONF_MAC_ADDRESS].parts]
rhs = hub.make_device(config[CONF_NAME],
ArrayInitializer(*addr, multiline=False))
binary_sensor.register_binary_sensor(rhs, config)
"Maximum internal filter value for ESP32 is 13us")
return value
else:
return cv.positive_time_period_microseconds(value)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakePulseCounterSensor),
vol.Required(CONF_PIN):
pins.internal_gpio_input_pin_schema,
vol.Optional(CONF_COUNT_MODE):
vol.Schema({
vol.Required(CONF_RISING_EDGE): COUNT_MODE_SCHEMA,
vol.Required(CONF_FALLING_EDGE): COUNT_MODE_SCHEMA,
}),
vol.Optional(CONF_INTERNAL_FILTER):
validate_internal_filter,
vol.Optional(CONF_UPDATE_INTERVAL):
cv.positive_time_period_milliseconds,
vol.Optional(CONF_PULL_MODE):
cv.invalid("The pull_mode option has been removed in 1.7.0, "
"please use the pin mode schema now.")
}))
def to_code(config):
pin = None
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
if vcc == 'VCC':
return cv.only_on_esp8266(vcc)
return pins.analog_pin(value)
MakeADCSensor = Application.struct('MakeADCSensor')
ADCSensorComponent = sensor.sensor_ns.class_('ADCSensorComponent',
sensor.PollingSensorComponent)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(ADCSensorComponent),
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeADCSensor),
vol.Required(CONF_PIN):
validate_adc_pin,
vol.Optional(CONF_ATTENUATION):
vol.All(cv.only_on_esp32, cv.one_of(*ATTENUATION_MODES, lower=True)),
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
pin = config[CONF_PIN]
if pin == 'VCC':
pin = 0
rhs = App.make_adc_sensor(config[CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
import esphomeyaml.config_validation as cv
from esphomeyaml.const import CONF_MAKE_ID, CONF_NAME, CONF_QOS, CONF_TOPIC
from esphomeyaml.helpers import App, Application, add, variable, setup_component, Component
DEPENDENCIES = ['mqtt']
MakeMQTTSubscribeTextSensor = Application.struct('MakeMQTTSubscribeTextSensor')
MQTTSubscribeTextSensor = text_sensor.text_sensor_ns.class_(
'MQTTSubscribeTextSensor', text_sensor.TextSensor, Component)
PLATFORM_SCHEMA = cv.nameable(
text_sensor.TEXT_SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(MQTTSubscribeTextSensor),
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeMQTTSubscribeTextSensor),
vol.Required(CONF_TOPIC):
cv.subscribe_topic,
vol.Optional(CONF_QOS):
cv.mqtt_qos,
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
rhs = App.make_mqtt_subscribe_text_sensor(config[CONF_NAME],
config[CONF_TOPIC])
make = variable(config[CONF_MAKE_ID], rhs)
sensor_ = make.Psensor
if CONF_QOS in config:
add(sensor_.set_qos(config[CONF_QOS]))
from esphomeyaml.components import sensor
from esphomeyaml.const import CONF_ADDRESS, CONF_MAKE_ID, CONF_NAME, CONF_PRESSURE, \
CONF_TEMPERATURE, CONF_UPDATE_INTERVAL
from esphomeyaml.helpers import App, Application, add, variable
DEPENDENCIES = ['i2c']
MakeMS5611Sensor = Application.MakeMS5611Sensor
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeMS5611Sensor),
vol.Optional(CONF_ADDRESS):
cv.i2c_address,
vol.Required(CONF_TEMPERATURE):
cv.nameable(sensor.SENSOR_SCHEMA),
vol.Required(CONF_PRESSURE):
cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
})
def to_code(config):
rhs = App.make_ms5611_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_PRESSURE][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
if CONF_ADDRESS in config:
add(make.Pms5611.set_address(config[CONF_ADDRESS]))
BME680PressureSensor = sensor.sensor_ns.class_('BME680PressureSensor',
sensor.EmptyPollingParentSensor)
BME680HumiditySensor = sensor.sensor_ns.class_('BME680HumiditySensor',
sensor.EmptyPollingParentSensor)
BME680GasResistanceSensor = sensor.sensor_ns.class_(
'BME680GasResistanceSensor', sensor.EmptyPollingParentSensor)
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeBME680Sensor),
vol.Optional(CONF_ADDRESS, default=0x76):
cv.i2c_address,
vol.Required(CONF_TEMPERATURE):
cv.nameable(
BME680_OVERSAMPLING_SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(BME680TemperatureSensor),
})),
vol.Required(CONF_PRESSURE):
cv.nameable(
BME680_OVERSAMPLING_SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(BME680PressureSensor),
})),
vol.Required(CONF_HUMIDITY):
cv.nameable(
BME680_OVERSAMPLING_SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(BME680HumiditySensor),
})),
vol.Required(CONF_GAS_RESISTANCE):
from esphomeyaml.components import sensor
from esphomeyaml.components.esp32_ble_tracker import CONF_ESP32_BLE_ID, ESP32BLETracker, \
make_address_array
from esphomeyaml.const import CONF_BATTERY_LEVEL, CONF_HUMIDITY, CONF_MAC_ADDRESS, CONF_MAKE_ID, \
CONF_NAME, CONF_TEMPERATURE
from esphomeyaml.helpers import Pvariable, esphomelib_ns, get_variable
DEPENDENCIES = ['esp32_ble_tracker']
XiaomiDevice = esphomelib_ns.XiaomiDevice
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(XiaomiDevice),
cv.GenerateID(CONF_ESP32_BLE_ID): cv.use_variable_id(ESP32BLETracker),
vol.Required(CONF_MAC_ADDRESS): cv.mac_address,
vol.Optional(CONF_TEMPERATURE): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_HUMIDITY): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_BATTERY_LEVEL): cv.nameable(sensor.SENSOR_SCHEMA),
})
def to_code(config):
hub = None
for hub in get_variable(config[CONF_ESP32_BLE_ID]):
yield
rhs = hub.make_xiaomi_device(make_address_array(config[CONF_MAC_ADDRESS]))
dev = Pvariable(config[CONF_MAKE_ID], rhs)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sensor.register_sensor(dev.Pmake_temperature_sensor(conf[CONF_NAME]), conf)
if CONF_HUMIDITY in config:
DEPENDENCIES = ['i2c']
MakeMS5611Sensor = Application.struct('MakeMS5611Sensor')
MS5611Component = sensor.sensor_ns.class_('MS5611Component', PollingComponent, i2c.I2CDevice)
MS5611TemperatureSensor = sensor.sensor_ns.class_('MS5611TemperatureSensor',
sensor.EmptyPollingParentSensor)
MS5611PressureSensor = sensor.sensor_ns.class_('MS5611PressureSensor',
sensor.EmptyPollingParentSensor)
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(MS5611Component),
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeMS5611Sensor),
vol.Optional(CONF_ADDRESS): cv.i2c_address,
vol.Required(CONF_TEMPERATURE): cv.nameable(sensor.SENSOR_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(MS5611TemperatureSensor),
})),
vol.Required(CONF_PRESSURE): cv.nameable(sensor.SENSOR_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(MS5611PressureSensor),
})),
vol.Optional(CONF_UPDATE_INTERVAL): cv.update_interval,
}).extend(cv.COMPONENT_SCHEMA.schema)
def to_code(config):
rhs = App.make_ms5611_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_PRESSURE][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
ms5611 = make.Pms5611
Pvariable(config[CONF_ID], ms5611)
"long.")
try:
x = int(x, 16)
except ValueError:
raise vol.Invalid("Valid characters for parts of a UID are 0123456789ABCDEF.")
if x < 0 or x > 255:
raise vol.Invalid("Valid values for UID parts (separated by '-') are 00 to FF")
return value
PN532BinarySensor = binary_sensor.binary_sensor_ns.class_('PN532BinarySensor',
binary_sensor.BinarySensor)
PLATFORM_SCHEMA = cv.nameable(binary_sensor.BINARY_SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(PN532BinarySensor),
vol.Required(CONF_UID): validate_uid,
cv.GenerateID(CONF_PN532_ID): cv.use_variable_id(PN532Component)
}))
def to_code(config):
for hub in get_variable(config[CONF_PN532_ID]):
yield
addr = [HexInt(int(x, 16)) for x in config[CONF_UID].split('-')]
rhs = hub.make_tag(config[CONF_NAME], ArrayInitializer(*addr, multiline=False))
binary_sensor.register_binary_sensor(rhs, config)
def to_hass_config(data, config):
return binary_sensor.core_to_hass_config(data, config)
CONF_DEFAULT_TRANSITION_LENGTH, CONF_EFFECTS, CONF_GAMMA_CORRECT, CONF_MAKE_ID, \
CONF_NAME, CONF_WARM_WHITE, CONF_WARM_WHITE_COLOR_TEMPERATURE
from esphomeyaml.cpp_generator import get_variable, variable
from esphomeyaml.cpp_helpers import setup_component
from esphomeyaml.cpp_types import App
PLATFORM_SCHEMA = cv.nameable(
light.LIGHT_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(light.MakeLight),
vol.Required(CONF_COLD_WHITE):
cv.use_variable_id(output.FloatOutput),
vol.Required(CONF_WARM_WHITE):
cv.use_variable_id(output.FloatOutput),
vol.Required(CONF_COLD_WHITE_COLOR_TEMPERATURE):
validate_color_temperature,
vol.Required(CONF_WARM_WHITE_COLOR_TEMPERATURE):
validate_color_temperature,
vol.Optional(CONF_GAMMA_CORRECT):
cv.positive_float,
vol.Optional(CONF_DEFAULT_TRANSITION_LENGTH):
cv.positive_time_period_milliseconds,
vol.Optional(CONF_EFFECTS):
light.validate_effects(light.MONOCHROMATIC_EFFECTS),
}).extend(cv.COMPONENT_SCHEMA.schema), validate_cold_white_colder)
def to_code(config):
for cold_white in get_variable(config[CONF_COLD_WHITE]):
yield
for warm_white in get_variable(config[CONF_WARM_WHITE]):
from esphomeyaml.components import sensor
from esphomeyaml.components.dallas import DallasComponent
from esphomeyaml.const import CONF_ADDRESS, CONF_DALLAS_ID, CONF_INDEX, CONF_NAME, \
CONF_RESOLUTION
from esphomeyaml.helpers import HexIntLiteral, get_variable
DallasTemperatureSensor = sensor.sensor_ns.class_(
'DallasTemperatureSensor', sensor.EmptyPollingParentSensor)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(DallasTemperatureSensor),
vol.Exclusive(CONF_ADDRESS, 'dallas'):
cv.hex_int,
vol.Exclusive(CONF_INDEX, 'dallas'):
cv.positive_int,
cv.GenerateID(CONF_DALLAS_ID):
cv.use_variable_id(DallasComponent),
vol.Optional(CONF_RESOLUTION):
vol.All(vol.Coerce(int), vol.Range(min=9, max=12)),
}), cv.has_at_least_one_key(CONF_ADDRESS, CONF_INDEX))
def to_code(config):
for hub in get_variable(config[CONF_DALLAS_ID]):
yield
if CONF_ADDRESS in config:
address = HexIntLiteral(config[CONF_ADDRESS])
rhs = hub.Pget_sensor_by_address(config[CONF_NAME], address,
config.get(CONF_RESOLUTION))
CONF_IS_CS_PACKAGE = 'is_cs_package'
def validate_integration_time(value):
value = cv.positive_time_period_milliseconds(value).total_milliseconds
if value not in INTEGRATION_TIMES:
raise vol.Invalid(u"Unsupported integration time {}.".format(value))
return value
MakeTSL2561Sensor = Application.MakeTSL2561Sensor
PLATFORM_SCHEMA = cv.nameable(sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeTSL2561Sensor),
vol.Optional(CONF_ADDRESS, default=0x39): cv.i2c_address,
vol.Optional(CONF_INTEGRATION_TIME): validate_integration_time,
vol.Optional(CONF_GAIN): vol.All(vol.Upper, cv.one_of(*GAINS)),
vol.Optional(CONF_IS_CS_PACKAGE): cv.boolean,
vol.Optional(CONF_UPDATE_INTERVAL): cv.positive_time_period_milliseconds,
}))
def to_code(config):
rhs = App.make_tsl2561_sensor(config[CONF_NAME], config[CONF_ADDRESS],
config.get(CONF_UPDATE_INTERVAL))
make_tsl = variable(config[CONF_MAKE_ID], rhs)
tsl2561 = make_tsl.Ptsl2561
if CONF_INTEGRATION_TIME in config:
add(tsl2561.set_integration_time(INTEGRATION_TIMES[config[CONF_INTEGRATION_TIME]]))
if CONF_GAIN in config:
add(tsl2561.set_gain(GAINS[config[CONF_GAIN]]))
if CONF_IS_CS_PACKAGE in config:
import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml.components import sensor
from esphomeyaml.const import CONF_HUMIDITY, CONF_MAKE_ID, CONF_NAME, CONF_TEMPERATURE, \
CONF_UPDATE_INTERVAL
from esphomeyaml.helpers import App, Application, variable
DEPENDENCIES = ['i2c']
MakeHTU21DSensor = Application.MakeHTU21DSensor
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeHTU21DSensor),
vol.Required(CONF_TEMPERATURE): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Required(CONF_HUMIDITY): cv.nameable(sensor.SENSOR_SCHEMA),
vol.Optional(CONF_UPDATE_INTERVAL): cv.positive_time_period_milliseconds,
})
def to_code(config):
rhs = App.make_htu21d_sensor(config[CONF_TEMPERATURE][CONF_NAME],
config[CONF_HUMIDITY][CONF_NAME],
config.get(CONF_UPDATE_INTERVAL))
htu21d = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(htu21d.Phtu21d.Pget_temperature_sensor(), htu21d.Pmqtt_temperature,
config[CONF_TEMPERATURE])
sensor.setup_sensor(htu21d.Phtu21d.Pget_humidity_sensor(), htu21d.Pmqtt_humidity,
config[CONF_HUMIDITY])
CONF_PIN_A = 'pin_a'
CONF_PIN_B = 'pin_b'
CONF_PIN_RESET = 'pin_reset'
MakeRotaryEncoderSensor = Application.struct('MakeRotaryEncoderSensor')
RotaryEncoderSensor = sensor.sensor_ns.class_('RotaryEncoderSensor',
sensor.Sensor, Component)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(RotaryEncoderSensor),
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeRotaryEncoderSensor),
vol.Required(CONF_PIN_A):
pins.internal_gpio_input_pin_schema,
vol.Required(CONF_PIN_B):
pins.internal_gpio_input_pin_schema,
vol.Optional(CONF_PIN_RESET):
pins.internal_gpio_input_pin_schema,
vol.Optional(CONF_RESOLUTION):
cv.one_of(*RESOLUTIONS, string=True),
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
for pin_a in gpio_input_pin_expression(config[CONF_PIN_A]):
yield
for pin_b in gpio_input_pin_expression(config[CONF_PIN_B]):
yield
rhs = App.make_rotary_encoder_sensor(config[CONF_NAME], pin_a, pin_b)
return cv.one_of(*GAIN)(value)
def validate_mux(value):
value = cv.string(value).upper()
value = value.replace(' ', '_')
return cv.one_of(*MUX)(value)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
vol.Required(CONF_MULTIPLEXER):
validate_mux,
vol.Required(CONF_GAIN):
validate_gain,
cv.GenerateID(CONF_ADS1115_ID):
cv.use_variable_id(ADS1115Component),
vol.Optional(CONF_UPDATE_INTERVAL):
cv.positive_time_period_milliseconds,
}))
def to_code(config):
hub = None
for hub in get_variable(config[CONF_ADS1115_ID]):
yield
mux = MUX[config[CONF_MULTIPLEXER]]
gain = GAIN[config[CONF_GAIN]]
rhs = hub.get_sensor(config[CONF_NAME], mux, gain,
HDC1080Component = sensor.sensor_ns.class_('HDC1080Component',
PollingComponent, i2c.I2CDevice)
HDC1080TemperatureSensor = sensor.sensor_ns.class_(
'HDC1080TemperatureSensor', sensor.EmptyPollingParentSensor)
HDC1080HumiditySensor = sensor.sensor_ns.class_(
'HDC1080HumiditySensor', sensor.EmptyPollingParentSensor)
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeHDC1080Sensor),
cv.GenerateID():
cv.declare_variable_id(HDC1080Component),
vol.Required(CONF_TEMPERATURE):
cv.nameable(
sensor.SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(HDC1080TemperatureSensor),
})),
vol.Required(CONF_HUMIDITY):
cv.nameable(
sensor.SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(HDC1080HumiditySensor),
})),
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
}).extend(cv.COMPONENT_SCHEMA.schema)
def to_code(config):
rhs = App.make_hdc1080_sensor(config[CONF_TEMPERATURE][CONF_NAME],
import voluptuous as vol
from esphomeyaml import pins
from esphomeyaml.components import switch
import esphomeyaml.config_validation as cv
from esphomeyaml.const import CONF_MAKE_ID, CONF_NAME, CONF_PIN
from esphomeyaml.helpers import App, Application, gpio_output_pin_expression, variable, \
setup_component, Component
MakeGPIOSwitch = Application.struct('MakeGPIOSwitch')
GPIOSwitch = switch.switch_ns.class_('GPIOSwitch', switch.Switch, Component)
PLATFORM_SCHEMA = cv.nameable(switch.SWITCH_PLATFORM_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(GPIOSwitch),
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeGPIOSwitch),
vol.Required(CONF_PIN): pins.gpio_output_pin_schema,
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
for pin in gpio_output_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_gpio_switch(config[CONF_NAME], pin)
make = variable(config[CONF_MAKE_ID], rhs)
gpio = make.Pswitch_
switch.setup_switch(gpio, make.Pmqtt, config)
setup_component(gpio, config)
BUILD_FLAGS = '-DUSE_GPIO_SWITCH'
MakeFastLEDLight = Application.struct('MakeFastLEDLight')
PLATFORM_SCHEMA = cv.nameable(
light.LIGHT_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeFastLEDLight),
vol.Required(CONF_CHIPSET):
cv.one_of(*CHIPSETS, upper=True),
vol.Required(CONF_DATA_PIN):
pins.output_pin,
vol.Required(CONF_CLOCK_PIN):
pins.output_pin,
vol.Required(CONF_NUM_LEDS):
cv.positive_not_null_int,
vol.Optional(CONF_RGB_ORDER):
cv.one_of(*RGB_ORDERS, upper=True),
vol.Optional(CONF_MAX_REFRESH_RATE):
cv.positive_time_period_microseconds,
vol.Optional(CONF_GAMMA_CORRECT):
cv.positive_float,
vol.Optional(CONF_COLOR_CORRECT):
vol.All([cv.percentage], vol.Length(min=3, max=3)),
vol.Optional(CONF_DEFAULT_TRANSITION_LENGTH):
cv.positive_time_period_milliseconds,
vol.Optional(CONF_POWER_SUPPLY):
cv.use_variable_id(PowerSupplyComponent),
vol.Optional(CONF_EFFECTS):
light.validate_effects(light.ADDRESSABLE_EFFECTS),
}).extend(cv.COMPONENT_SCHEMA.schema))
from esphomeyaml import automation
from esphomeyaml.components import cover
from esphomeyaml.const import CONF_CLOSE_ACTION, CONF_LAMBDA, CONF_MAKE_ID, CONF_NAME, \
CONF_OPEN_ACTION, CONF_STOP_ACTION, CONF_OPTIMISTIC
from esphomeyaml.cpp_generator import variable, process_lambda, add
from esphomeyaml.cpp_helpers import setup_component
from esphomeyaml.cpp_types import Application, App, optional, NoArg
MakeTemplateCover = Application.struct('MakeTemplateCover')
TemplateCover = cover.cover_ns.class_('TemplateCover', cover.Cover)
PLATFORM_SCHEMA = cv.nameable(cover.COVER_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeTemplateCover),
cv.GenerateID(): cv.declare_variable_id(TemplateCover),
vol.Optional(CONF_LAMBDA): cv.lambda_,
vol.Optional(CONF_OPTIMISTIC): cv.boolean,
vol.Optional(CONF_OPEN_ACTION): automation.validate_automation(single=True),
vol.Optional(CONF_CLOSE_ACTION): automation.validate_automation(single=True),
vol.Optional(CONF_STOP_ACTION): automation.validate_automation(single=True),
}).extend(cv.COMPONENT_SCHEMA.schema), cv.has_at_least_one_key(CONF_LAMBDA, CONF_OPTIMISTIC))
def to_code(config):
rhs = App.make_template_cover(config[CONF_NAME])
make = variable(config[CONF_MAKE_ID], rhs)
cover.setup_cover(make.Ptemplate_, make.Pmqtt, config)
setup_component(make.Ptemplate_, config)
if CONF_LAMBDA in config:
for template_ in process_lambda(config[CONF_LAMBDA], [],
sensor.EmptyPollingParentSensor)
INA219PowerSensor = sensor.sensor_ns.class_('INA219PowerSensor',
sensor.EmptyPollingParentSensor)
SENSOR_KEYS = [CONF_BUS_VOLTAGE, CONF_SHUNT_VOLTAGE, CONF_CURRENT, CONF_POWER]
PLATFORM_SCHEMA = vol.All(
sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(INA219Component),
vol.Optional(CONF_ADDRESS, default=0x40):
cv.i2c_address,
vol.Optional(CONF_BUS_VOLTAGE):
cv.nameable(
sensor.SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(INA219VoltageSensor),
})),
vol.Optional(CONF_SHUNT_VOLTAGE):
cv.nameable(
sensor.SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(INA219VoltageSensor),
})),
vol.Optional(CONF_CURRENT):
cv.nameable(
sensor.SENSOR_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(INA219CurrentSensor),
})),
vol.Optional(CONF_POWER):
import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml.components import light
from esphomeyaml.const import CONF_DEFAULT_TRANSITION_LENGTH, CONF_GAMMA_CORRECT, CONF_MAKE_ID, \
CONF_NAME, CONF_OUTPUT
from esphomeyaml.helpers import App, get_variable, variable
PLATFORM_SCHEMA = cv.nameable(light.LIGHT_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(light.MakeLight),
vol.Required(CONF_OUTPUT): cv.use_variable_id(None),
vol.Optional(CONF_GAMMA_CORRECT): cv.positive_float,
vol.Optional(CONF_DEFAULT_TRANSITION_LENGTH): cv.positive_time_period_milliseconds,
}))
def to_code(config):
output = None
for output in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_monochromatic_light(config[CONF_NAME], output)
light_struct = variable(config[CONF_MAKE_ID], rhs)
light.setup_light(light_struct.Pstate, light_struct.Pmqtt, config)
import esphomeyaml.config_validation as cv
from esphomeyaml.const import CONF_BATTERY_LEVEL, CONF_HUMIDITY, CONF_MAC_ADDRESS, CONF_MAKE_ID, \
CONF_NAME, CONF_TEMPERATURE
from esphomeyaml.cpp_generator import get_variable, Pvariable
DEPENDENCIES = ['esp32_ble_tracker']
PLATFORM_SCHEMA = sensor.PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(esp32_ble_tracker.XiaomiDevice),
cv.GenerateID(CONF_ESP32_BLE_ID):
cv.use_variable_id(ESP32BLETracker),
vol.Required(CONF_MAC_ADDRESS):
cv.mac_address,
vol.Optional(CONF_TEMPERATURE):
cv.nameable(esp32_ble_tracker.XIAOMI_SENSOR_SCHEMA),
vol.Optional(CONF_HUMIDITY):
cv.nameable(esp32_ble_tracker.XIAOMI_SENSOR_SCHEMA),
vol.Optional(CONF_BATTERY_LEVEL):
cv.nameable(esp32_ble_tracker.XIAOMI_SENSOR_SCHEMA),
})
def to_code(config):
for hub in get_variable(config[CONF_ESP32_BLE_ID]):
yield
rhs = hub.make_xiaomi_device(make_address_array(config[CONF_MAC_ADDRESS]))
dev = Pvariable(config[CONF_MAKE_ID], rhs)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sensor.register_sensor(dev.Pmake_temperature_sensor(conf[CONF_NAME]),
import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml.components import switch
from esphomeyaml.const import CONF_INVERTED, CONF_MAKE_ID, CONF_NAME
from esphomeyaml.helpers import App, Application, variable
MakeShutdownSwitch = Application.struct('MakeShutdownSwitch')
ShutdownSwitch = switch.switch_ns.class_('ShutdownSwitch', switch.Switch)
PLATFORM_SCHEMA = cv.nameable(
switch.SWITCH_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(ShutdownSwitch),
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeShutdownSwitch),
vol.Optional(CONF_INVERTED):
cv.invalid("Shutdown switches do not support inverted mode!"),
}))
def to_code(config):
rhs = App.make_shutdown_switch(config[CONF_NAME])
shutdown = variable(config[CONF_MAKE_ID], rhs)
switch.setup_switch(shutdown.Pshutdown, shutdown.Pmqtt, config)
BUILD_FLAGS = '-DUSE_SHUTDOWN_SWITCH'
def to_hass_config(data, config):
setup_component
from esphomeyaml.cpp_types import Application, App
MakeUltrasonicSensor = Application.struct('MakeUltrasonicSensor')
UltrasonicSensorComponent = sensor.sensor_ns.class_(
'UltrasonicSensorComponent', sensor.PollingSensorComponent)
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID():
cv.declare_variable_id(UltrasonicSensorComponent),
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeUltrasonicSensor),
vol.Required(CONF_TRIGGER_PIN):
pins.gpio_output_pin_schema,
vol.Required(CONF_ECHO_PIN):
pins.internal_gpio_input_pin_schema,
vol.Exclusive(CONF_TIMEOUT_METER, 'timeout'):
cv.positive_float,
vol.Exclusive(CONF_TIMEOUT_TIME, 'timeout'):
cv.positive_time_period_microseconds,
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
}))
def to_code(config):
for trigger in gpio_output_pin_expression(config[CONF_TRIGGER_PIN]):
yield
for echo in gpio_input_pin_expression(config[CONF_ECHO_PIN]):
yield
import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml.components import fan, output
from esphomeyaml.const import CONF_MAKE_ID, CONF_NAME, CONF_OSCILLATION_OUTPUT, CONF_OUTPUT
from esphomeyaml.helpers import App, add, get_variable, variable, setup_component
PLATFORM_SCHEMA = cv.nameable(
fan.FAN_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(fan.MakeFan),
vol.Required(CONF_OUTPUT):
cv.use_variable_id(output.BinaryOutput),
vol.Optional(CONF_OSCILLATION_OUTPUT):
cv.use_variable_id(output.BinaryOutput),
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
for output_ in get_variable(config[CONF_OUTPUT]):
yield
rhs = App.make_fan(config[CONF_NAME])
fan_struct = variable(config[CONF_MAKE_ID], rhs)
add(fan_struct.Poutput.set_binary(output_))
if CONF_OSCILLATION_OUTPUT in config:
for oscillation_output in get_variable(
config[CONF_OSCILLATION_OUTPUT]):
yield
add(fan_struct.Poutput.set_oscillation(oscillation_output))
DEPENDENCIES = ['i2c']
BH1750_RESOLUTIONS = {
4.0: sensor.sensor_ns.BH1750_RESOLUTION_4P0_LX,
1.0: sensor.sensor_ns.BH1750_RESOLUTION_1P0_LX,
0.5: sensor.sensor_ns.BH1750_RESOLUTION_0P5_LX,
}
MakeBH1750Sensor = Application.MakeBH1750Sensor
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeBH1750Sensor),
vol.Optional(CONF_ADDRESS, default=0x23):
cv.i2c_address,
vol.Optional(CONF_RESOLUTION):
vol.All(cv.positive_float, cv.one_of(*BH1750_RESOLUTIONS)),
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
}))
def to_code(config):
rhs = App.make_bh1750_sensor(config[CONF_NAME], config[CONF_ADDRESS],
config.get(CONF_UPDATE_INTERVAL))
make_bh1750 = variable(config[CONF_MAKE_ID], rhs)
bh1750 = make_bh1750.Pbh1750
if CONF_RESOLUTION in config:
add(bh1750.set_resolution(BH1750_RESOLUTIONS[config[CONF_RESOLUTION]]))
sensor.setup_sensor(bh1750, make_bh1750.Pmqtt, config)
import esphomeyaml.config_validation as cv
from esphomeyaml.components import sensor
from esphomeyaml.const import CONF_MAKE_ID, CONF_NAME, CONF_UPDATE_INTERVAL, ESP_PLATFORM_ESP32
from esphomeyaml.cpp_generator import variable
from esphomeyaml.cpp_helpers import setup_component
from esphomeyaml.cpp_types import Application, App
ESP_PLATFORMS = [ESP_PLATFORM_ESP32]
MakeESP32TemperatureSensor = Application.struct('MakeESP32TemperatureSensor')
ESP32TemperatureSensor = sensor.sensor_ns.class_('ESP32TemperatureSensor',
sensor.PollingSensorComponent)
PLATFORM_SCHEMA = cv.nameable(sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(): cv.declare_variable_id(ESP32TemperatureSensor),
cv.GenerateID(CONF_MAKE_ID): cv.declare_variable_id(MakeESP32TemperatureSensor),
vol.Optional(CONF_UPDATE_INTERVAL): cv.update_interval,
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
rhs = App.make_esp32_temperature_sensor(config[CONF_NAME], config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Phall, make.Pmqtt, config)
setup_component(make.Phall, config)
BUILD_FLAGS = '-DUSE_ESP32_TEMPERATURE_SENSOR'
def to_hass_config(data, config):
PLATFORM_SCHEMA = cv.nameable(switch.SWITCH_PLATFORM_SCHEMA.extend({
vol.Optional(CONF_LG): vol.Schema({
vol.Required(CONF_DATA): cv.hex_uint32_t,
vol.Optional(CONF_NBITS, default=28): vol.All(vol.Coerce(int), cv.one_of(28, 32)),
}),
vol.Optional(CONF_NEC): vol.Schema({
vol.Required(CONF_ADDRESS): cv.hex_uint16_t,
vol.Required(CONF_COMMAND): cv.hex_uint16_t,
}),
vol.Optional(CONF_SONY): vol.Schema({
vol.Required(CONF_DATA): cv.hex_uint32_t,
vol.Optional(CONF_NBITS, default=12): vol.All(vol.Coerce(int), cv.one_of(12, 15, 20)),
}),
vol.Optional(CONF_PANASONIC): vol.Schema({
vol.Required(CONF_ADDRESS): cv.hex_uint16_t,
vol.Required(CONF_COMMAND): cv.hex_uint32_t,
}),
vol.Optional(CONF_RAW): vol.Any(validate_raw_data, vol.Schema({
vol.Required(CONF_DATA): validate_raw_data,
vol.Optional(CONF_CARRIER_FREQUENCY): vol.All(cv.frequency, vol.Coerce(int)),
})),
vol.Optional(CONF_RC_SWITCH_RAW): RC_SWITCH_RAW_SCHEMA,
vol.Optional(CONF_RC_SWITCH_TYPE_A): RC_SWITCH_TYPE_A_SCHEMA,
vol.Optional(CONF_RC_SWITCH_TYPE_B): RC_SWITCH_TYPE_B_SCHEMA,
vol.Optional(CONF_RC_SWITCH_TYPE_C): RC_SWITCH_TYPE_C_SCHEMA,
vol.Optional(CONF_RC_SWITCH_TYPE_D): RC_SWITCH_TYPE_D_SCHEMA,
vol.Optional(CONF_REPEAT): vol.Any(cv.positive_not_null_int, vol.Schema({
vol.Required(CONF_TIMES): cv.positive_not_null_int,
vol.Required(CONF_WAIT_TIME): cv.positive_time_period_microseconds,
})),
cv.GenerateID(CONF_REMOTE_TRANSMITTER_ID): cv.use_variable_id(RemoteTransmitterComponent),
cv.GenerateID(CONF_TRANSMITTER_ID): cv.declare_variable_id(RemoteTransmitter),
vol.Optional(CONF_INVERTED): cv.invalid("Remote Transmitters do not support inverted mode!"),
}), cv.has_exactly_one_key(*REMOTE_KEYS))
import voluptuous as vol
import esphomeyaml.config_validation as cv
from esphomeyaml import pins
from esphomeyaml.components import sensor
from esphomeyaml.const import CONF_MAKE_ID, CONF_NAME, CONF_PIN, CONF_UPDATE_INTERVAL
from esphomeyaml.helpers import App, Application, gpio_input_pin_expression, variable
MakeDutyCycleSensor = Application.MakeDutyCycleSensor
PLATFORM_SCHEMA = cv.nameable(
sensor.SENSOR_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(MakeDutyCycleSensor),
vol.Required(CONF_PIN):
pins.internal_gpio_input_pin_schema,
vol.Optional(CONF_UPDATE_INTERVAL):
cv.update_interval,
}))
def to_code(config):
pin = None
for pin in gpio_input_pin_expression(config[CONF_PIN]):
yield
rhs = App.make_duty_cycle_sensor(config[CONF_NAME], pin,
config.get(CONF_UPDATE_INTERVAL))
make = variable(config[CONF_MAKE_ID], rhs)
sensor.setup_sensor(make.Pduty, make.Pmqtt, config)
import esphomeyaml.config_validation as cv
from esphomeyaml.components import light, output
from esphomeyaml.const import CONF_BLUE, CONF_DEFAULT_TRANSITION_LENGTH, CONF_GAMMA_CORRECT, \
CONF_GREEN, CONF_MAKE_ID, CONF_NAME, CONF_RED, CONF_WHITE, CONF_EFFECTS
from esphomeyaml.helpers import App, get_variable, variable, setup_component
PLATFORM_SCHEMA = cv.nameable(
light.LIGHT_PLATFORM_SCHEMA.extend({
cv.GenerateID(CONF_MAKE_ID):
cv.declare_variable_id(light.MakeLight),
vol.Required(CONF_RED):
cv.use_variable_id(output.FloatOutput),
vol.Required(CONF_GREEN):
cv.use_variable_id(output.FloatOutput),
vol.Required(CONF_BLUE):
cv.use_variable_id(output.FloatOutput),
vol.Required(CONF_WHITE):
cv.use_variable_id(output.FloatOutput),
vol.Optional(CONF_GAMMA_CORRECT):
cv.positive_float,
vol.Optional(CONF_DEFAULT_TRANSITION_LENGTH):
cv.positive_time_period_milliseconds,
vol.Optional(CONF_EFFECTS):
light.validate_effects(light.RGB_EFFECTS),
}).extend(cv.COMPONENT_SCHEMA.schema))
def to_code(config):
for red in get_variable(config[CONF_RED]):
yield
for green in get_variable(config[CONF_GREEN]):