def testReceivingServerAction():
c = \
"""
[general]
fdtSendingClientCommand = sudo -u %(sudouser)s bash wrapper_fdt.sh -P 35 -p %(port)s -c %(hostDest)s -d / -fl %(fileList)s -noupdates
fdtReceivingServerCommand = sudo -u %(sudouser)s bash wrapper_fdt.sh -bs 2M -p %(port)s -noupdates
"""
f = getTempFile(c)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
a = ReceivingServerAction("some_id", dict(port = 1000, gridUserDest = "someuser"))
a._setUp(conf, 1000)
assert a.options["port"] == 1000
# this one did not get interpolated for server action, so it's not set
py.test.raises(KeyError, a.options.__getitem__, "fdtSendingClientCommand")
assert a.command == "sudo -u someuser bash wrapper_fdt.sh -bs 2M -p 1000 -noupdates"
def testFDTDServiceOpenFiles():
"""
#41 - Too many open files (fdtd side)
"""
hostName = os.uname()[1]
f = getTempFile(functionalFDTDConfiguration)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
conf.sanitize()
testName = inspect.stack()[0][3]
logger = Logger(name=testName,
logFile="/tmp/fdtdtest-%s.log" % testName,
level=logging.DEBUG)
apMon = None
fdtd = FDTD(conf, apMon, logger)
proc = Process(os.getpid())
initStateNumOpenFiles = len(proc.get_open_files())
for testAction in [TestAction("fakeSrc", "fakeDst") for i in range(3)]:
r = fdtd.service.service(testAction)
logger.debug("Result: %s" % r)
assert r.status == 0
# after TestAction, there should not be left behind any open files
numOpenFilesNow = len(proc.get_open_files())
assert initStateNumOpenFiles == numOpenFilesNow
# test on ReceivingServerAction - it's action after which the
# separate logger is not closed, test the number of open files went +1,
# send CleanupProcessesAction and shall again remain
# initStateNumOpenFiles send appropriate TestAction first (like in real)
serverId = "server-id"
testAction = TestAction(hostName, hostName)
testAction.id = serverId
r = fdtd.service.service(testAction)
assert r.status == 0
options = dict(gridUserDest="someuserDest",
clientIP=os.uname()[1],
destFiles=[])
recvServerAction = ReceivingServerAction(testAction.id, options)
r = fdtd.service.service(recvServerAction)
print r.msg
assert r.status == 0
numOpenFilesNow = len(proc.get_open_files())
# there should be only 1 extra opened file now
assert initStateNumOpenFiles == numOpenFilesNow - 1
cleanupAction = CleanupProcessesAction(serverId, timeout=2)
r = fdtd.service.service(cleanupAction)
print r.msg
assert r.status == 0
numOpenFilesNow = len(proc.get_open_files())
assert initStateNumOpenFiles == numOpenFilesNow
fdtd.shutdown()
fdtd.pyroDaemon.closedown()
logger.close()
def testReceivingServerAction():
c = \
"""
[general]
fdtSendingClientCommand = sudo -u %(sudouser)s bash wrapper_fdt.sh -P 35 -p %(port)s -c %(hostDest)s -d / -fl %(fileList)s -noupdates
fdtReceivingServerCommand = sudo -u %(sudouser)s bash wrapper_fdt.sh -bs 2M -p %(port)s -noupdates
"""
f = getTempFile(c)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
a = ReceivingServerAction("some_id",
dict(port=1000, gridUserDest="someuser"))
a._setUp(conf, 1000)
assert a.options["port"] == 1000
# this one did not get interpolated for server action, so it's not set
py.test.raises(KeyError, a.options.__getitem__, "fdtSendingClientCommand")
cmd = "sudo -u someuser bash wrapper_fdt.sh -bs 2M -p 1000 -noupdates"
assert a.command == cmd
def testReceivingServerActionCheckTargetFileNames():
logger = Logger()
files = ["/mnt/data", "/etc/passwd", "/etc/something/nonsence", "/tmp"]
options = dict(port=1000, gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
logger.info("%s - checking presence of files at target location ..." %
a.__class__.__name__)
r = a._checkTargetFileNames(files)
logger.debug("Results:\n%s" % r)
expected = \
""" exists True: /mnt/data
exists False: /mnt/.data
exists True: /etc/passwd
exists False: /etc/.passwd
exists False: /etc/something/nonsence
exists False: /etc/something/.nonsence
exists True: /tmp
exists False: /.tmp
"""
assert r == expected
def testReceivingServerActionCheckTargetFileNames():
logger = Logger()
files = ["/mnt/data", "/etc/passwd", "/etc/something/nonsence", "/tmp"]
options = dict(port=1000, gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
logger.info("%s - checking presence of files at target location ..." %
a.__class__.__name__)
r = a._checkTargetFileNames(files)
logger.debug("Results:\n%s" % r)
expected = \
""" exists True: /mnt/data
exists False: /mnt/.data
exists True: /etc/passwd
exists False: /etc/.passwd
exists False: /etc/something/nonsence
exists False: /etc/something/.nonsence
exists True: /tmp
exists False: /.tmp
"""
assert r == expected
def testReceivingServerAddressAlreadyInUse():
c = """
[general]
port = 6700
debug = DEBUG
portRangeFDTServer = 54321,54323
fdtReceivingServerCommand = java -jar ../fdtjava/fdt.jar -bs 64K -p %(port)s -wCount 5 -S -noupdates
fdtServerLogOutputTimeout = 2
fdtServerLogOutputToWaitFor = "FDTServer start listening on port: %(port)s"
fdtReceivingServerKillTimeout = 1
killCommand = "kill -9 %(pid)s"
killCommandSudo = "kill -9 %(pid)s"
"""
f = getTempFile(c)
inputOptions = "-d DEBUG -p 6700 --config=%s" % f.name
conf = ConfigFDTD(inputOptions.split())
testName = inspect.stack()[0][3]
logger = Logger(name=testName, level=logging.DEBUG)
apMon = None
daemon = FDTD(conf, apMon, logger)
assert len(daemon._executors) == 0
files = ["/mnt/data", "/etc/passwd", "/etc/something/nonsence", "/tmp"]
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
a._checkForAddressAlreadyInUseError("some message", 222, logger)
a._checkForAddressAlreadyInUseError("some message", 25, logger)
a._checkForAddressAlreadyInUseError("Address already in use", 25, logger)
a._checkForAddressAlreadyInUseError("Address already in use", 22225,
logger)
logger.info("Now real FDT Java server real attempts")
logger.info('#' * 78)
# 1) successful attempt
logger.info('1' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
assert len(daemon._executors) == 0
result = a.execute(conf=conf, caller=daemon, apMon=apMon, logger=logger)
assert len(daemon._executors) == 1
assert result.status == 0
assert result.serverPort == 54321
assert result.msg == "FDT server is running"
# 2) this executor attempt shall fail with Address already in use,
# fool into reusing the same port 54321 as the previous process
# by replacing caller.getFreePort() method which is used in
# ReceivingServerAction.exectute()
def myFoolGetFreePort(inp, logger):
def returner():
logger.debug("myFoolGetFreePort called, returning %s" % inp)
return inp
return returner
daemon.getFreePort = myFoolGetFreePort(54321, logger)
logger.info('2' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id-2", options)
py.test.raises(FDTDException,
a.execute,
conf=conf,
caller=daemon,
apMon=apMon,
logger=logger)
# starting FDT Java command failed, but the request remains in the
# executor container for later cleanup
assert len(daemon._executors) == 2
# 3) kill both executors / processes - one running, other failed
logger.info('3' * 78)
daemon.killProcess("some_id", logger, waitTimeout=False)
assert len(daemon._executors) == 1
daemon.killProcess("some_id-2", logger, waitTimeout=False)
assert len(daemon._executors) == 0
# 4) try starting FDT Java server on privileged port - will fail
logger.info('4' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
daemon.getFreePort = myFoolGetFreePort(999, logger)
py.test.raises(FDTDException,
a.execute,
conf=conf,
caller=daemon,
apMon=apMon,
logger=logger)
assert len(daemon._executors) == 1
daemon.killProcess("some_id", logger, waitTimeout=False)
assert len(daemon._executors) == 0
daemon.shutdown()
daemon.pyroDaemon.closedown()
def performTransfer(self):
self.logger.info("Starting transfer %s" % self)
if self.result != None:
self.logger.warn("Skipping transfer %s (already failed)." % self)
return
# timeout is used only on TestActions (testing mutual connection)
# id of the initial action (this test (TestAction)) is later used
# in all subsequent actions related to this particular transfer
timeout = int(self.conf.get("timeout"))
testAction = TestAction(self.hostSrc, self.hostDest, timeout=timeout)
self.id = testAction.id
self.logger.info("Testing remote parties availability, "
"transfer id: '%s' ..." % testAction.id)
self.receiver.perform(testAction)
self.sender.perform(testAction)
# remote services are available, authenticate with both
# remoteGridUserSrc - user's name at the source site
# remoteGridUserDest - user's name at the destination site
authStartTime = datetime.datetime.now()
remoteGridUserSrc, remoteGridUserDest = self._runAuthChain()
authEndTime = datetime.datetime.now()
authTime = (authEndTime - authStartTime).seconds
par = dict(id=self.id, authentication=authTime)
self.logger.debug("Authentication lasted: %s [s]." % authTime)
if self.apMon:
self.logger.debug("Sending data to ApMon ...")
self.apMon.sendParameters("fdtcp", None, par)
# find out client IP address, server will need
# it (-f <allowedIPsList>) when starting
clientIP = socket.gethostbyname(self.hostSrc)
self.logger.debug("Client IP address is: '%s'" % clientIP)
# since the separate log file may not be closed properly once the
# ReceivingServer request is send, register the request for possible
# cleaning now (issue found during ticket:5#comment:24)
# no exception was raised, remote process must be running, register
# for clean up (remote process may however terminate normally, then
# shall be removed from the container of processes at the remote
# party)
self.toCleanup.append(self.receiver.uri)
# start receiving server first, information on its port will need
# the client
# destFiles - list if files at destination - just check (#36)
destFiles = [f.fileDest for f in self.files]
options = dict(gridUserDest=remoteGridUserDest,
clientIP=clientIP,
destFiles=destFiles)
recvServerAction = ReceivingServerAction(self.id, options)
result = self.receiver.perform(recvServerAction)
serverFDTPort = result.serverPort
self.logger.info("Remote FDT server: %s:%s" %
(result.host, serverFDTPort))
# calling the client is synchronous action - waiting until it finishes
# if the client hangs without progress - may want to kill such remote
# process, thus register the remote URI into clean up local container
# if something goes wrong, this remote URI later receives
# CleanupAction to kill its running processes
self.toCleanup.append(self.sender.uri)
# start sending FDT client which initiates the transfer process
options = dict(port=serverFDTPort,
hostDest=self.hostDest,
transferFiles=self.files,
gridUserSrc=remoteGridUserSrc)
sndClientAction = SendingClientAction(self.id, options)
# this command will stop the execution flow, for very very long if
# the transfer data is bulky - status monitoring via MonALISA
# using the transfer id
result = self.sender.perform(sndClientAction)
self.logger.info("Transfer result: %s, logs (FDT sending "
"client):\n%s" % (result, result.log))
self.result = result.status
# don't put the log there for now, but in case of failure it puts the
# log into result and then into report file
# self.log = result.log
# clean up remote processes
# the server - FDT Java server is run with -S - it gets
# automatically shut once the transfer is over
# the client - if everything was all right (client not hanging), it
# has already successfully finished (and the key of the process
# has been removed from the container with the client)
# yet call the cleanup at both sides explicitly
self.performCleanup(waitTimeout=True)
def testFDTDServiceOpenFilesFullTransfer():
"""
#41:comment:8 - Too many open files (fdtd side)
SendingClient actually removed itself from the executors container
once it finishes so subsequent CleanupProcessesAction doesn't know
about this process, nor about its open separate log file, which
doesn't get closed.
Simulate a simple successful transfer, send all actions and
check number of open files - does all as it happens in fdtd.service()
"""
hostName = os.uname()[1]
testName = inspect.stack()[0][3]
initStateNumOpenFilesTestStart, filesStr = getOpenFilesList()
print("%s: test 0: open files: %s items:\n%s" %
(testName, initStateNumOpenFilesTestStart, filesStr))
# there should not be any open files now
assert initStateNumOpenFilesTestStart == 0
f = getTempFile(functionalFDTDConfiguration)
inputOption = "--config=%s --port=10001" % f.name
confServer = ConfigFDTD(inputOption.split())
confServer.sanitize()
loggerServer = Logger(name=testName,
logFile="/tmp/fdtdtest-%s-writer.log" % testName,
level=logging.DEBUG)
apMon = None
fdtdServer = FDTD(confServer, apMon, loggerServer)
inputOption = "--config=%s --port=10002" % f.name
confReader = ConfigFDTD(inputOption.split())
confReader.sanitize()
loggerReader = Logger(name=testName,
logFile="/tmp/fdtdtest-%s-reader.log" % testName,
level=logging.DEBUG)
apMon = None
fdtdReader = FDTD(confReader, apMon, loggerReader)
# -2 open log files, additional -1 is the temp config file
initStateNumOpenFiles, filesStr = getOpenFilesList()
print("%s: test 1: open files: %s items:\n%s" %
(testName, initStateNumOpenFiles, filesStr))
assert initStateNumOpenFilesTestStart == initStateNumOpenFiles - 2 - 1
testActionServer = TestAction(hostName, hostName)
testActionServer.id = testActionServer.id + "-writer"
r = fdtdServer.service.service(testActionServer)
assert r.status == 0
options = dict(gridUserDest="someuserDest",
clientIP=os.uname()[1],
destFiles=["/dev/null"])
recvServerAction = ReceivingServerAction(testActionServer.id, options)
r = fdtdServer.service.service(recvServerAction)
print r.msg
assert r.status == 0
serverFDTPort = r.serverPort
# there should be only 1 extra opened file now - ReceivingServerAction
# separate log
numOpenFilesNow, filesStr = getOpenFilesList()
print("%s: test 2: open files: %s items:\n%s" %
(testName, numOpenFilesNow, filesStr))
assert initStateNumOpenFiles == numOpenFilesNow - 1
testActionReader = TestAction(hostName, hostName)
testActionReader.id = testActionReader.id + "-reader"
r = fdtdReader.service.service(testActionReader)
assert r.status == 0
files = [TransferFile("/etc/passwd", "/dev/null")] # list of TransferFile
options = dict(port=serverFDTPort,
hostDest=os.uname()[1],
transferFiles=files,
gridUserSrc="soemuserSrc")
sndClientAction = SendingClientAction(testActionReader.id, options)
r = fdtdReader.service.service(sndClientAction)
assert r.status == 0
# there should be +2 extra - for separate both server and client
numOpenFilesNow, filesStr = getOpenFilesList()
print("%s: test 3: open files: %s items:\n%s" %
(testName, numOpenFilesNow, filesStr))
# 2 extra files - separate transfer log at both ends
assert initStateNumOpenFiles == numOpenFilesNow - 2
# now the transfer is over, both server (writer) and sender (reader)
# parties kept their separate log files open, CleanupProcessesAction
# will close them
print "going to clean up"
cl = CleanupProcessesAction(testActionReader.id, waitTimeout=False)
r = fdtdReader.service.service(cl)
assert r.status == 0
# one shall be closed now
numOpenFilesNow, filesStr = getOpenFilesList()
print("%s: test 4: open files: %s items:\n%s" %
(testName, numOpenFilesNow, filesStr))
assert initStateNumOpenFiles == numOpenFilesNow - 1
cl = CleanupProcessesAction(testActionServer.id, waitTimeout=False)
r = fdtdServer.service.service(cl)
assert r.status == 0
# both separate log files should be closed now
# problem #41:comment:8 was here - server behaved correctly, but
# reader kept its separate log file open
numOpenFilesNow, filesStr = getOpenFilesList()
print("%s: test 5: open files: %s items:\n%s" %
(testName, numOpenFilesNow, filesStr))
assert initStateNumOpenFiles == numOpenFilesNow
fdtdServer.shutdown()
fdtdServer.pyroDaemon.closedown()
loggerServer.close()
fdtdReader.shutdown()
fdtdReader.pyroDaemon.closedown()
loggerReader.close()
# after even log files were closed, etc
numOpenFilesNow, filesStr = getOpenFilesList()
print("%s: test 6: open files: %s items:\n%s" %
(testName, numOpenFilesNow, filesStr))
# -1: the temp configuration file is still open
assert initStateNumOpenFilesTestStart == numOpenFilesNow - 1
def testAddressAlreadyInUseRoundRobinPortReservation():
"""
#38 - Address already in use FDT Java
https://trac.hep.caltech.edu/trac/fdtcp/ticket/38
Address already in use problem was seen during #5:comment:20
https://trac.hep.caltech.edu/trac/fdtcp/ticket/5#comment:20
2 times out of 338 transfer (attempts). Probably, when there is
traffic the port can't be bound immediately even if it was
released very short ago by the previous process.
This test could not reproduce the problem (when reusing immediately
the same port number for the next request), so FDTD.getFreePort()
was reimplemented to reserver ports on round-robin basis.
"""
hostName = os.uname()[1]
f = getTempFile(functionalFDTDConfiguration)
inputOption = "--config=%s" % f.name
conf = ConfigFDTD(inputOption.split())
conf.sanitize()
testName = inspect.stack()[0][3]
logger = Logger(name=testName,
logFile="/tmp/fdtdtest-%s.log" % testName,
level=logging.DEBUG)
apMon = None
fdtd = FDTD(conf, apMon, logger)
# launch two subsequent ReceivingServerAction, second will likely fail
# to bind the same, just very short ago, released port
serverId = "%s" % testName
testAction = TestAction(hostName, hostName)
testAction.id = serverId
# do TestAction
r = fdtd.service.service(testAction)
assert r.status == 0
options = dict(gridUserDest="someuserDest",
clientIP=os.uname()[1],
destFiles=[])
recvServerAction = ReceivingServerAction(testAction.id, options)
# do ReceivingServerAction - start FDT Java server
r = fdtd.service.service(recvServerAction)
print r.msg
assert r.status == 0
assert r.serverPort == 54321
cleanupAction = CleanupProcessesAction(serverId,
timeout=0,
waitTimeout=False)
# do CleanupProcessesAction - shut FDT Java server, port shall be
# released
r = fdtd.service.service(cleanupAction)
print r.msg
assert r.status == 0
# do another ReceivingServerAction - start FDT Java server
r = fdtd.service.service(recvServerAction)
print r.msg
assert r.status == 0
# will not get the same port, but the next one in the range
assert r.serverPort == 54322
# in fact, if separate log files are enabled, after this last
# ReceivingServerAction, there is a separate log file open.
# taking the the service down, it should also closed it's related
# to open files #41 problem
fdtd.shutdown()
fdtd.pyroDaemon.closedown()
logger.close()
def testReceivingServerAddressAlreadyInUse():
c = """
[general]
port = 6700
debug = DEBUG
portRangeFDTServer = 54321,54323
fdtReceivingServerCommand = java -jar ../fdtjava/fdt.jar -bs 64K -p %(port)s -wCount 5 -S -noupdates
fdtServerLogOutputTimeout = 2
fdtServerLogOutputToWaitFor = "FDTServer start listening on port: %(port)s"
fdtReceivingServerKillTimeout = 1
killCommand = "kill -9 %(pid)s"
killCommandSudo = "kill -9 %(pid)s"
"""
f = getTempFile(c)
inputOptions = "-d DEBUG -p 6700 --config=%s" % f.name
conf = ConfigFDTD(inputOptions.split())
testName = inspect.stack()[0][3]
logger = Logger(name=testName, level=logging.DEBUG)
apMon = None
daemon = FDTD(conf, apMon, logger)
assert len(daemon._executors) == 0
files = ["/mnt/data", "/etc/passwd", "/etc/something/nonsence", "/tmp"]
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
a._checkForAddressAlreadyInUseError("some message", 222, logger)
a._checkForAddressAlreadyInUseError("some message", 25, logger)
a._checkForAddressAlreadyInUseError("Address already in use", 25, logger)
a._checkForAddressAlreadyInUseError("Address already in use", 22225,
logger)
logger.info("Now real FDT Java server real attempts")
logger.info('#' * 78)
# 1) successful attempt
logger.info('1' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
assert len(daemon._executors) == 0
result = a.execute(conf=conf, caller=daemon, apMon=apMon, logger=logger)
assert len(daemon._executors) == 1
assert result.status == 0
assert result.serverPort == 54321
assert result.msg == "FDT server is running"
# 2) this executor attempt shall fail with Address already in use,
# fool into reusing the same port 54321 as the previous process
# by replacing caller.getFreePort() method which is used in
# ReceivingServerAction.exectute()
def myFoolGetFreePort(inp, logger):
def returner():
logger.debug("myFoolGetFreePort called, returning %s" % inp)
return inp
return returner
daemon.getFreePort = myFoolGetFreePort(54321, logger)
logger.info('2' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id-2", options)
py.test.raises(FDTDException, a.execute, conf=conf, caller=daemon,
apMon=apMon, logger=logger)
# starting FDT Java command failed, but the request remains in the
# executor container for later cleanup
assert len(daemon._executors) == 2
# 3) kill both executors / processes - one running, other failed
logger.info('3' * 78)
daemon.killProcess("some_id", logger, waitTimeout=False)
assert len(daemon._executors) == 1
daemon.killProcess("some_id-2", logger, waitTimeout=False)
assert len(daemon._executors) == 0
# 4) try starting FDT Java server on privileged port - will fail
logger.info('4' * 78)
options = dict(gridUserDest="someuser", destFiles=files)
a = ReceivingServerAction("some_id", options)
daemon.getFreePort = myFoolGetFreePort(999, logger)
py.test.raises(FDTDException, a.execute, conf=conf, caller=daemon,
apMon=apMon, logger=logger)
assert len(daemon._executors) == 1
daemon.killProcess("some_id", logger, waitTimeout=False)
assert len(daemon._executors) == 0
daemon.shutdown()
daemon.pyroDaemon.closedown()
