def __init__(self, solver_object):
self.form = FreeCADGui.PySideUic.loadUi(FreeCAD.getHomePath() + "Mod/Fem/Resources/ui/SolverCalculix.ui")
from femtools.ccxtools import CcxTools as ccx
# we do not need to pass the analysis, it will be found on fea init
self.fea = ccx(solver_object)
self.fea.setup_working_dir()
self.fea.setup_ccx()
self.Calculix = QtCore.QProcess()
self.Timer = QtCore.QTimer()
self.Timer.start(300)
self.fem_console_message = ''
# Connect Signals and Slots
QtCore.QObject.connect(self.form.tb_choose_working_dir, QtCore.SIGNAL("clicked()"), self.choose_working_dir)
QtCore.QObject.connect(self.form.pb_write_inp, QtCore.SIGNAL("clicked()"), self.write_input_file_handler)
QtCore.QObject.connect(self.form.pb_edit_inp, QtCore.SIGNAL("clicked()"), self.editCalculixInputFile)
QtCore.QObject.connect(self.form.pb_run_ccx, QtCore.SIGNAL("clicked()"), self.runCalculix)
QtCore.QObject.connect(self.form.rb_static_analysis, QtCore.SIGNAL("clicked()"), self.select_static_analysis)
QtCore.QObject.connect(self.form.rb_frequency_analysis, QtCore.SIGNAL("clicked()"), self.select_frequency_analysis)
QtCore.QObject.connect(self.form.rb_thermomech_analysis, QtCore.SIGNAL("clicked()"), self.select_thermomech_analysis)
QtCore.QObject.connect(self.form.rb_check_mesh, QtCore.SIGNAL("clicked()"), self.select_check_mesh)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("started()"), self.calculixStarted)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("stateChanged(QProcess::ProcessState)"), self.calculixStateChanged)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("error(QProcess::ProcessError)"), self.calculixError)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("finished(int)"), self.calculixFinished)
QtCore.QObject.connect(self.Timer, QtCore.SIGNAL("timeout()"), self.UpdateText)
self.update()
def __init__(self, solver_object):
self.form = FreeCADGui.PySideUic.loadUi(
FreeCAD.getHomePath() + "Mod/Fem/Resources/ui/SolverCalculix.ui")
from femtools.ccxtools import CcxTools as ccx
# we do not need to pass the analysis, it will be found on fea init
# TODO: if there is not analysis object in document init of fea
# will fail with an exception and task panel will not open
# handle more smart by a pop up error message and still open
# task panel, may be deactivate write and run button.
self.fea = ccx(solver_object)
self.fea.setup_working_dir()
self.fea.setup_ccx()
self.Calculix = QtCore.QProcess()
self.Timer = QtCore.QTimer()
self.Timer.start(300)
self.fem_console_message = ""
# Connect Signals and Slots
QtCore.QObject.connect(self.form.tb_choose_working_dir,
QtCore.SIGNAL("clicked()"),
self.choose_working_dir)
QtCore.QObject.connect(self.form.pb_write_inp,
QtCore.SIGNAL("clicked()"),
self.write_input_file_handler)
QtCore.QObject.connect(self.form.pb_edit_inp,
QtCore.SIGNAL("clicked()"),
self.editCalculixInputFile)
QtCore.QObject.connect(self.form.pb_run_ccx,
QtCore.SIGNAL("clicked()"), self.runCalculix)
QtCore.QObject.connect(self.form.rb_static_analysis,
QtCore.SIGNAL("clicked()"),
self.select_static_analysis)
QtCore.QObject.connect(self.form.rb_frequency_analysis,
QtCore.SIGNAL("clicked()"),
self.select_frequency_analysis)
QtCore.QObject.connect(self.form.rb_thermomech_analysis,
QtCore.SIGNAL("clicked()"),
self.select_thermomech_analysis)
QtCore.QObject.connect(self.form.rb_check_mesh,
QtCore.SIGNAL("clicked()"),
self.select_check_mesh)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("started()"),
self.calculixStarted)
QtCore.QObject.connect(
self.Calculix,
QtCore.SIGNAL("stateChanged(QProcess::ProcessState)"),
self.calculixStateChanged)
QtCore.QObject.connect(self.Calculix,
QtCore.SIGNAL("error(QProcess::ProcessError)"),
self.calculixError)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("finished(int)"),
self.calculixFinished)
QtCore.QObject.connect(self.Timer, QtCore.SIGNAL("timeout()"),
self.UpdateText)
self.update()
def run_fem_solver(solver, working_dir=None):
if solver.Proxy.Type == "Fem::FemSolverCalculixCcxTools":
App.Console.PrintMessage("CalxuliX ccx tools solver!\n")
from femtools.ccxtools import CcxTools as ccx
fea = ccx(solver)
fea.reset_mesh_purge_results_checked()
if working_dir is None:
fea.run()
else:
fea.update_objects()
fea.setup_working_dir(working_dir)
fea.setup_ccx()
message = fea.check_prerequisites()
if not message:
fea.write_inp_file()
fea.ccx_run()
fea.load_results()
else:
App.Console.PrintError("Houston, we have a problem ...!\n{}\n".format(message))
else:
# App.Console.PrintMessage("Frame work solver!\n")
try:
if working_dir is not None:
machine = getMachine(solver, working_dir)
else:
machine = getMachine(solver)
except MustSaveError:
error_message = (
"Please save the file before executing the solver. "
"This must be done because the location of the working "
"directory is set to \"Beside *.FCStd File\"."
)
App.Console.PrintError(error_message + "\n")
if App.GuiUp:
QtGui.QMessageBox.critical(
FreeCADGui.getMainWindow(),
"Can't start Solver",
error_message
)
return
except DirectoryDoesNotExistError:
error_message = "Selected working directory doesn't exist."
App.Console.PrintError(error_message + "\n")
if App.GuiUp:
QtGui.QMessageBox.critical(
FreeCADGui.getMainWindow(),
"Can't start Solver",
error_message
)
return
if not machine.running:
machine.reset()
machine.target = RESULTS
machine.start()
machine.join() # wait for the machine to finish.
def run_fem_solver(solver, working_dir=None):
""" Execute *solver* of the solver framework.
Uses :meth:`getMachine <femsolver.solverbase.Proxy.getMachine>` to obtain a
:class:`Machine` instance of the solver. It than executes the Machine with
using the ``RESULTS`` target (see :class:`Machine` for infos about
different targets). This method is blocking, it waits for the solver to
finished before returning. Be aware of :class:`Machine` caching when using
the function.
:param solver:
A document object which must be a framework compliant solver. This means
that it should be derived from the document object provided by
:mod:`femsolver.solverbase` and implement all required methods
correctly. Of particular importance is :meth:`getMachine
<femsolver.solverbase.Proxy.getMachine>` as it is used by this method
the get the :class:`Machine` used to execute the solver.
:param working_dir:
If specified it overwrites the automatic and user configurable working
directory management of the Solver framework. Should always be a
absolute path because the location of the binary is not consistent
among platforms. If ``None`` the automatic working directory management
is used.
:note:
There is some legacy code to execute the old Calculix solver
(pre-framework) which behaives differently because it doesn't use a
:class:`Machine`.
"""
if solver.Proxy.Type == "Fem::FemSolverCalculixCcxTools":
App.Console.PrintMessage("CalxuliX ccx tools solver!\n")
from femtools.ccxtools import CcxTools as ccx
fea = ccx(solver)
fea.reset_mesh_purge_results_checked()
if working_dir is None:
fea.run()
else:
fea.update_objects()
fea.setup_working_dir(working_dir)
fea.setup_ccx()
message = fea.check_prerequisites()
if not message:
fea.write_inp_file()
fea.ccx_run()
fea.load_results()
else:
App.Console.PrintError(
"Houston, we have a problem ...!\n{}\n".format(message))
else:
# App.Console.PrintMessage("Frame work solver!\n")
try:
if working_dir is not None:
machine = getMachine(solver, working_dir)
else:
machine = getMachine(solver)
except femutils.MustSaveError:
error_message = (
"Please save the file before executing the solver. "
"This must be done because the location of the working "
"directory is set to \"Beside *.FCStd File\".")
App.Console.PrintError(error_message + "\n")
if App.GuiUp:
QtGui.QMessageBox.critical(FreeCADGui.getMainWindow(),
"Can't start Solver", error_message)
return
except femutils.DirectoryDoesNotExistError:
error_message = "Selected working directory doesn't exist."
App.Console.PrintError(error_message + "\n")
if App.GuiUp:
QtGui.QMessageBox.critical(FreeCADGui.getMainWindow(),
"Can't start Solver", error_message)
return
if not machine.running:
machine.reset()
machine.target = RESULTS
machine.start()
machine.join() # wait for the machine to finish.
