Example #1
0
 def add_port(self, port_name):
     Modlib.runshell([
         LinuxBridge.iptool, "link", "set", port_name, "mtu",
         str(self.mtu)
     ])
     Modlib.runshell([LinuxBridge.brctl, "addif", self.name, port_name])
     self.ports.add(port_name)
Example #2
0
 def stp(self, val=True):
     """ Turn STP protocol on/off. """
     if val:
         state = "on"
     else:
         state = "off"
     Modlib.runshell([LinuxBridge.brctl, "stp", self.name, state])
Example #3
0
 def add_patch_port(self, peer_patch_port):
     iface_opt = "options:peer={0}".format(peer_patch_port)
     Modlib.runshell([
         OvsBridge.brctl, "--may-exist", "add-port", self.name,
         self._patch_port, "--", "set", "interface", self._patch_port,
         "type=patch", iface_opt
     ])
Example #4
0
 def add_port(self, port_name):
     Modlib.runshell([
         OvsBridge.iptool, "link", "set", "dev", port_name, "mtu",
         str(self.mtu)
     ])
     Modlib.runshell(
         [OvsBridge.brctl, "--may-exist", "add-port", self.name, port_name])
     self.ports.add(port_name)
Example #5
0
    def add_sdn_ctrl(self, sdn_ctrl_cfg):
        if sdn_ctrl_cfg["ConnectionType"] == "tcp":
            ctrl_conn_str = ":".join([
                sdn_ctrl_cfg["ConnectionType"], sdn_ctrl_cfg["HostName"],
                sdn_ctrl_cfg["Port"]
            ])

            Modlib.runshell(
                [OvsBridge.brctl, "set-controller", self.name, ctrl_conn_str])
Example #6
0
 def del_port(self, port_name):
     p = Modlib.runshell([LinuxBridge.brctl, "show", self.name])
     wlist = map(str.split, p.stdout.decode("utf-8").splitlines()[1:])
     port_lines = filter(lambda x: len(x) == 4, wlist)
     ports = map(lambda x: x[-1], port_lines)
     for port in ports:
         if port == port_name:
             Modlib.runshell(
                 [LinuxBridge.brctl, "delif", self.name, port_name])
             if port_name in self.ports:
                 self.ports.remove(port_name)
Example #7
0
 def req_handler_remove_tunnel(self, cbt):
     msg = cbt.request.params
     ctl = modlib.CTL_REMOVE_TUNNEL
     ctl["EVIO"]["TransactionId"] = cbt.tag
     req = ctl["EVIO"]["Request"]
     req["OverlayId"] = msg["OverlayId"]
     req["TunnelId"] = msg["TunnelId"]
     self.send_control(json.dumps(ctl))
     if "TapName" in msg and msg["TapName"]:
         modlib.runshell(
             [self.iptool, "link", "del", "dev", msg["TapName"]])
Example #8
0
 def req_handler_manage_bridge(self, cbt):
     try:
         olid = cbt.request.params["OverlayId"]
         br = self._ovl_net[olid]
         port_name = cbt.request.params.get("TapName")
         tnlid = cbt.request.params["TunnelId"]
         if cbt.request.params["UpdateType"] == "LnkEvCreated":
             # block external system components from attempting to configure our
             # tunnel as a source of traffic
             #port_name = cbt.request.params["TapName"]
             Modlib.runshell([
                 "sysctl",
                 "net.ipv6.conf.{}.disable_ipv6=1".format(port_name)
             ])
             Modlib.runshell([OvsBridge.iptool, "addr", "flush", port_name])
         elif cbt.request.params["UpdateType"] == "LnkEvConnected":
             #port_name = cbt.request.params["TapName"]
             self._tunnels[olid][port_name] = {
                 "PeerId": cbt.request.params["PeerId"],
                 "TunnelId": tnlid,
                 "ConnectedTimestamp":
                 cbt.request.params["ConnectedTimestamp"],
                 "TapName": port_name,
                 "MAC": Modlib.delim_mac_str(cbt.request.params["MAC"]),
                 "PeerMac":
                 Modlib.delim_mac_str(cbt.request.params["PeerMac"])
             }
             self._tunnels[olid]["DSeq"] = self._tunnels[olid]["DSeq"] + 1
             br.add_port(port_name)
             self.log("LOG_INFO", "Port %s added to bridge %s", port_name,
                      str(br))
         elif cbt.request.params["UpdateType"] == "LnkEvRemoved":
             self._tunnels[olid].pop(port_name, None)
             if br.bridge_type == OvsBridge.bridge_type:
                 self._tunnels[olid][
                     "DSeq"] = self._tunnels[olid]["DSeq"] + 1
                 br.del_port(port_name)
                 self.log("LOG_INFO", "Port %s removed from bridge %s",
                          port_name, str(br))
     except RuntimeError as err:
         self.register_cbt("Logger", "LOG_WARNING", str(err))
     cbt.set_response(None, True)
     self.complete_cbt(cbt)
Example #9
0
    def __init__(self,
                 name,
                 ip_addr,
                 prefix_len,
                 mtu,
                 cm,
                 stp_enable,
                 sdn_ctrl_cfg=None):
        """ Initialize an OpenvSwitch bridge object. """
        super(OvsBridge, self).__init__(name, ip_addr, prefix_len, mtu, cm)
        if OvsBridge.brctl is None or OvsBridge.iptool is None:
            raise RuntimeError(
                "openvswitch-switch was not found"
                if not OvsBridge.brctl else "iproute2 was not found")
        self._patch_port = self.name[:3] + "-pp0"
        Modlib.runshell([OvsBridge.brctl, "--may-exist", "add-br", self.name])

        if ip_addr and prefix_len:
            net = "{0}/{1}".format(ip_addr, prefix_len)
            Modlib.runshell(
                [OvsBridge.iptool, "addr", "flush", "dev", self.name])
            Modlib.runshell(
                [OvsBridge.iptool, "addr", "add", net, "dev", self.name])

        try:
            Modlib.runshell([
                OvsBridge.brctl, "set", "int", self.name,
                "mtu_request=" + str(self.mtu)
            ])
        except RuntimeError as e:
            self.cm.register_cbt(
                "Logger", "LOG_WARN",
                "The following error occurred while setting"
                " MTU for OVS bridge: {0}".format(e))

        self.stp(stp_enable)
        Modlib.runshell(
            [OvsBridge.iptool, "link", "set", "dev", self.name, "up"])

        if sdn_ctrl_cfg:
            self.add_sdn_ctrl(sdn_ctrl_cfg)
Example #10
0
 def add_port(self, port_name):
     self.name = port_name
     net = "{0}/{1}".format(self.ip_addr, self.prefix_len)
     Modlib.runshell([VNIC.iptool, "addr", "add", net, "dev", self.name])
     Modlib.runshell(
         [VNIC.iptool, "link", "set", self.name, "mtu",
          str(self.mtu)])
     Modlib.runshell([VNIC.iptool, "link", "set", "dev", self.name, "up"])
Example #11
0
    def __init__(self, name, ip_addr, prefix_len, mtu, cm, stp_enable):
        """ Initialize a Linux bridge object. """
        super(LinuxBridge, self).__init__(name, ip_addr, prefix_len, mtu, cm)
        if LinuxBridge.brctl is None or LinuxBridge.iptool is None:
            raise RuntimeError("bridge-utils was not found" if not LinuxBridge.
                               brctl else "iproute2 was not found")
        p = Modlib.runshell([LinuxBridge.brctl, "show"])
        wlist = map(str.split, p.stdout.decode("utf-8").splitlines()[1:])
        brwlist = filter(lambda x: len(x) != 1, wlist)
        brlist = map(lambda x: x[0], brwlist)
        for br in brlist:
            if br == name:
                return

        p = Modlib.runshell([LinuxBridge.brctl, "addbr", self.name])
        net = "{0}/{1}".format(ip_addr, prefix_len)
        if ip_addr and prefix_len:
            Modlib.runshell(
                [LinuxBridge.iptool, "addr", "add", net, "dev", name])
        self.stp(stp_enable)
        Modlib.runshell([LinuxBridge.iptool, "link", "set", "dev", name, "up"])
Example #12
0
 def del_br(self):
     # Set the device down and delete the bridge
     Modlib.runshell(
         [LinuxBridge.iptool, "link", "set", "dev", self.name, "down"])
     Modlib.runshell([LinuxBridge.brctl, "delbr", self.name])
Example #13
0
 def set_port_prio(self, port, prio):
     """ Set port priority value. """
     Modlib.runshell(
         [LinuxBridge.brctl, "setportprio", self.name, port,
          str(prio)])
Example #14
0
 def set_path_cost(self, port, cost):
     """ Set port path cost value for STP protocol. """
     Modlib.runshell(
         [LinuxBridge.brctl, "setpathcost", self.name, port,
          str(cost)])
Example #15
0
 def set_bridge_prio(self, prio):
     """ Set bridge priority value. """
     Modlib.runshell(
         [LinuxBridge.brctl, "setbridgeprio", self.name,
          str(prio)])
Example #16
0
 def del_sdn_ctrl(self):
     Modlib.runshell([OvsBridge.brctl, "del-controller", self.name])
Example #17
0
    def del_br(self):
        self.del_sdn_ctrl()

        Modlib.runshell([OvsBridge.brctl, "--if-exists", "del-br", self.name])
Example #18
0
 def del_port(self, port_name):
     Modlib.runshell(
         [OvsBridge.brctl, "--if-exists", "del-port", self.name, port_name])
     if port_name in self.ports:
         self.ports.remove(port_name)
Example #19
0
 def stp(self, enable):
     Modlib.runshell([
         OvsBridge.brctl, "set", "bridge", self.name,
         "stp_enable={0}".format("true" if enable else "false")
     ])