def __init__(self, opts):
import ft232
flags = [0, 0, 0, 0, 0, 0, 0, 0]
reset_pin = 5
host_pin = 3
serial = opts.ft232_serial[0]
self.sp = ft232.Ft232(serial, baudrate=115200)
self.sp.cbus_setup(mask=0xf, init=0xf)
self.flags = flags
self.reset_pin = reset_pin
self.host_pin = host_pin
def main():
inifile = configparser.ConfigParser()
inifile.read('bootloader.ini')
comport = inifile.get('settings', 'comport')
i = 1
boot_mode = 3
while i < len(sys.argv): # in range(1, len(sys.argv)):
arg2 = sys.argv[i].strip()
if 0 <= arg2.find('--port'):
comport = sys.argv[i + 1].strip()
i += 2
continue
if 0 <= arg2.find('--mode'):
boot_mode = int(sys.argv[i + 1].strip())
continue
i += 1
serial_number = get_serialnumber(comport)
if None == serial_number:
print('serial_number not found')
return
print('target is {}'.format(serial_number))
sp = []
try:
sp = ft232.Ft232(serial_number, baudrate=115200)
except ft232.Ft232Exception:
print("Unable to open the ftdi device: %s" % serial_number)
sys.exit(1)
reboot(sp, boot_mode)
# You may use sp as you would a Serial object
# sp.write(b"Hello World!\n")
# resp = sp.read(100)
# If you want to use the CBUS pins, you enable them with cbus_setup
# 'mask' is a bitmask which specifies which pins to enable
# 'init' is a bitmask for the initial value for each pin
# while True:
# sp.cbus_write(1)
# time.sleep(0.1)
# sp.cbus_write(2)
# time.sleep(0.1)
# sp.cbus_write(4)
# time.sleep(0.1)
# sp.cbus_write(8)
# time.sleep(0.1)
# Print the current value of all setup pins
print("CBUS: %s" % sp.cbus_read())
def main():
# serial_number = "DJ5LV1RQ"
serial_number = "DJ61E92G"
serial_number = "DN0556IZ" # IF314_USBIF
serial_number = "DN6KHMZE" # IF314_USBIF
sp = []
try:
sp = ft232.Ft232(serial_number, baudrate=115200)
except ft232.Ft232Exception:
print("Unable to open the ftdi device: %s" % serial_number)
sys.exit(1)
# You may use sp as you would a Serial object
# sp.write(b"Hello World!\n")
# resp = sp.read(100)
# If you want to use the CBUS pins, you enable them with cbus_setup
# 'mask' is a bitmask which specifies which pins to enable
# 'init' is a bitmask for the initial value for each pin
sp.cbus_setup(mask=15, init=0)
# Change the current value of all setup pins
for i in range(1000):
sp.cbus_write(1)
time.sleep(0.1)
sp.cbus_write(2)
time.sleep(0.1)
sp.cbus_write(4)
time.sleep(0.1)
sp.cbus_write(8)
time.sleep(0.1)
return
# while True:
# sp.cbus_write(1)
# time.sleep(0.1)
# sp.cbus_write(2)
# time.sleep(0.1)
# sp.cbus_write(4)
# time.sleep(0.1)
# sp.cbus_write(8)
# time.sleep(0.1)
# break
# Print the current value of all setup pins
print("CBUS: %s" % sp.cbus_read())
def __init__(self, conn, timeout=10., term_write=None, term_read=None, open_retry_times=3):
conn_dict=self.combine_serial_conn(conn,self._default_conn)
if term_write is None:
term_write="\r\n"
if term_read is None:
term_read="\n"
if isinstance(term_read,anystring):
term_read=[term_read]
IDeviceBackend.__init__(self,conn_dict.copy(),term_write=term_write,term_read=term_read)
port=conn_dict.pop("port")
try:
self.instr=ft232.Ft232(port,**conn_dict)
self._operation_cooldown=self._default_operation_cooldown
self._opened_stack=0
self._open_retry_times=open_retry_times
self.cooldown()
self.set_timeout(timeout)
except self.Error as e:
raise self.BackendOpenError(e)
def __init__(self, terminal, opts):
# Lazy-init FT232.
# On windows systems, if D2XX drivers are not installed
try:
import ft232
except:
print("ERROR: Failed to load pyft232")
print("ERROR: Is D2XX/libftdi installed?")
sys.exit(1)
# HACK: On some linux systems (debian buster) we can't free libftdi context
# HACK: or things will segfault
# HACK: This hack causes intentional memory leak, but prevents segfault
def dummy(x):
pass
try:
ft232.libftdi.ftdi.ftdi_free = dummy
except:
pass
serial = opts["mt12505_serial"]
if opts["mt12505_serial"] == None:
devices = ft232.list_devices()
devices = self.__to_mt12505_devices(devices)
if len(devices) == 0:
raise Exception("ERROR: No MT12505 devices found")
if len(devices) == 1:
serial = devices[0][0]
else:
print(
"WARNING: Multiple MT12505 devices found, please specify serial"
)
for d in devices:
print(f"Serial: {d[0]} Description: {d[1]}")
sys.exit(1)
self.sp = ft232.Ft232(serial, baudrate=115200)
self.sp.cbus_setup(mask=0xf, init=0xf)
return super().__init__(terminal, opts)