def obmc_boot_test_teardown():
r"""
Clean up after the Main keyword.
"""
if cp_setup_called:
plug_in_setup()
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='cleanup', stop_on_plug_in_failure=0)
if 'boot_results_file_path' in globals():
# Save boot_results object to a file in case it is needed again.
gp.qprint_timen("Saving boot_results to the following path.")
gp.qprint_var(boot_results_file_path)
pickle.dump(boot_results, open(boot_results_file_path, 'wb'),
pickle.HIGHEST_PROTOCOL)
global save_stack
# Restore any global values saved on the save_stack.
for parm_name in main_func_parm_list:
# Get the parm_value if it was saved on the stack.
try:
parm_value = save_stack.pop(parm_name)
except:
# If it was not saved, no further action is required.
continue
# Restore the saved value.
cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\
"}\", parm_value)"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
gp.dprintn(save_stack.sprint_obj())
def obmc_boot_test_teardown():
r"""
Clean up after the Main keyword.
"""
if cp_setup_called:
plug_in_setup()
rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages(
call_point='cleanup', stop_on_plug_in_failure=0)
if 'boot_results_file_path' in globals():
# Save boot_results object to a file in case it is needed again.
gp.qprint_timen("Saving boot_results to the following path.")
gp.qprint_var(boot_results_file_path)
pickle.dump(boot_results, open(boot_results_file_path, 'wb'),
pickle.HIGHEST_PROTOCOL)
global save_stack
# Restore any global values saved on the save_stack.
for parm_name in main_func_parm_list:
# Get the parm_value if it was saved on the stack.
try:
parm_value = save_stack.pop(parm_name)
except BaseException:
# If it was not saved, no further action is required.
continue
# Restore the saved value.
cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\
"}\", parm_value)"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
gp.dprintn(save_stack.sprint_obj())
def obmc_boot_test_py(loc_boot_stack=None,
loc_stack_mode=None,
loc_quiet=None):
r"""
Do main program processing.
"""
global save_stack
# Process function parms.
for parm_name in main_func_parm_list:
# Get parm's value.
cmd_buf = "parm_value = loc_" + parm_name
exec(cmd_buf)
gp.dpvar(parm_name)
gp.dpvar(parm_value)
if parm_value is None:
# Parm was not specified by the calling function so set it to its
# corresponding global value.
cmd_buf = "loc_" + parm_name + " = BuiltIn().get_variable_value" +\
"(\"${" + parm_name + "}\")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
else:
# Save the global value on a stack.
cmd_buf = "save_stack.push(BuiltIn().get_variable_value(\"${" +\
parm_name + "}\"), \"" + parm_name + "\")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
# Set the global value to the passed value.
cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\
"}\", loc_" + parm_name + ")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
gp.dprintn(save_stack.sprint_obj())
setup()
if ffdc_only:
gp.qprint_timen("Caller requested ffdc_only.")
pre_boot_plug_in_setup()
grk.run_key_u("my_ffdc")
return
# Process caller's boot_stack.
while (len(boot_stack) > 0):
test_loop_body()
gp.qprint_timen("Finished processing stack.")
# Process caller's boot_list.
if len(boot_list) > 0:
for ix in range(1, max_num_tests + 1):
test_loop_body()
gp.qprint_timen("Completed all requested boot tests.")
boot_pass, boot_fail = boot_results.return_total_pass_fail()
if boot_fail > boot_fail_threshold:
error_message = "Boot failures exceed the boot failure" +\
" threshold:\n" +\
gp.sprint_var(boot_fail) +\
gp.sprint_var(boot_fail_threshold)
BuiltIn().fail(gp.sprint_error(error_message))
def process_pgm_parms():
r"""
Process the program parameters by assigning them all to corresponding
globals. Also, set some global values that depend on program parameters.
"""
# Program parameter processing.
# Assign all program parms to python variables which are global to this
# module.
global parm_list
parm_list = BuiltIn().get_variable_value("${parm_list}")
# The following subset of parms should be processed as integers.
int_list = [
'max_num_tests', 'boot_pass', 'boot_fail', 'ffdc_only',
'boot_fail_threshold', 'quiet', 'test_mode', 'debug'
]
for parm in parm_list:
if parm in int_list:
sub_cmd = "int(BuiltIn().get_variable_value(\"${" + parm +\
"}\", \"0\"))"
else:
sub_cmd = "BuiltIn().get_variable_value(\"${" + parm + "}\")"
cmd_buf = "global " + parm + " ; " + parm + " = " + sub_cmd
gp.dpissuing(cmd_buf)
exec(cmd_buf)
if re.match(r".*_host$", parm):
cmd_buf = "process_host(" + parm + ", '" + parm + "')"
exec(cmd_buf)
if re.match(r".*_password$", parm):
# Register the value of any parm whose name ends in _password.
# This will cause the print functions to replace passwords with
# asterisks in the output.
cmd_buf = "gp.register_passwords(" + parm + ")"
exec(cmd_buf)
global ffdc_dir_path_style
global boot_list
global boot_stack
global boot_results_file_path
global boot_results
global ffdc_list_file_path
global ffdc_report_list_path
global ffdc_summary_list_path
if ffdc_dir_path_style == "":
ffdc_dir_path_style = int(os.environ.get('FFDC_DIR_PATH_STYLE', '0'))
# Convert these program parms to lists for easier processing..
boot_list = filter(None, boot_list.split(":"))
boot_stack = filter(None, boot_stack.split(":"))
boot_results_file_path = "/tmp/" + openbmc_nickname + ":pid_" +\
str(master_pid) + ":boot_results"
if os.path.isfile(boot_results_file_path):
# We've been called before in this run so we'll load the saved
# boot_results object.
boot_results = pickle.load(open(boot_results_file_path, 'rb'))
else:
boot_results = boot_results(boot_table, boot_pass, boot_fail)
ffdc_list_file_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_FILE_LIST"
ffdc_report_list_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_REPORT_FILE_LIST"
ffdc_summary_list_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_SUMMARY_FILE_LIST"
def obmc_boot_test_py(loc_boot_stack=None,
loc_stack_mode=None,
loc_quiet=None):
r"""
Do main program processing.
"""
global save_stack
ga.set_term_options(term_requests={'pgm_names': ['process_plug_in_packages.py']})
gp.dprintn()
# Process function parms.
for parm_name in main_func_parm_list:
# Get parm's value.
parm_value = eval("loc_" + parm_name)
gp.dpvars(parm_name, parm_value)
if parm_value is not None:
# Save the global value on a stack.
cmd_buf = "save_stack.push(BuiltIn().get_variable_value(\"${" +\
parm_name + "}\"), \"" + parm_name + "\")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
# Set the global value to the passed value.
cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\
"}\", loc_" + parm_name + ")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
gp.dprintn(save_stack.sprint_obj())
setup()
init_boot_pass, init_boot_fail = boot_results.return_total_pass_fail()
if ffdc_only:
gp.qprint_timen("Caller requested ffdc_only.")
if do_pre_boot_plug_in_setup:
pre_boot_plug_in_setup()
grk.run_key_u("my_ffdc")
return
if delete_errlogs:
# print error logs before delete
status, error_logs = grk.run_key_u("Get Error Logs")
pels = pel.peltool("-l", ignore_err=1)
log.print_error_logs(error_logs, "AdditionalData Message Severity")
gp.qprint_var(pels)
# Delete errlogs prior to doing any boot tests.
grk.run_key(delete_errlogs_cmd, ignore=1)
grk.run_key(delete_bmcdump_cmd, ignore=1)
# Process caller's boot_stack.
while (len(boot_stack) > 0):
test_loop_body()
gp.qprint_timen("Finished processing stack.")
post_stack()
# Process caller's boot_list.
if len(boot_list) > 0:
for ix in range(1, max_num_tests + 1):
test_loop_body()
gp.qprint_timen("Completed all requested boot tests.")
boot_pass, boot_fail = boot_results.return_total_pass_fail()
new_fail = boot_fail - init_boot_fail
if new_fail > boot_fail_threshold:
error_message = "Boot failures exceed the boot failure" +\
" threshold:\n" +\
gp.sprint_var(new_fail) +\
gp.sprint_var(boot_fail_threshold)
BuiltIn().fail(gp.sprint_error(error_message))
def obmc_boot_test_py(loc_boot_stack=None,
loc_stack_mode=None,
loc_quiet=None):
r"""
Do main program processing.
"""
global save_stack
# Process function parms.
for parm_name in main_func_parm_list:
# Get parm's value.
cmd_buf = "parm_value = loc_" + parm_name
exec(cmd_buf)
gp.dpvar(parm_name)
gp.dpvar(parm_value)
if parm_value is None:
# Parm was not specified by the calling function so set it to its
# corresponding global value.
cmd_buf = "loc_" + parm_name + " = BuiltIn().get_variable_value" +\
"(\"${" + parm_name + "}\")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
else:
# Save the global value on a stack.
cmd_buf = "save_stack.push(BuiltIn().get_variable_value(\"${" +\
parm_name + "}\"), \"" + parm_name + "\")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
# Set the global value to the passed value.
cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\
"}\", loc_" + parm_name + ")"
gp.dpissuing(cmd_buf)
exec(cmd_buf)
gp.dprintn(save_stack.sprint_obj())
setup()
init_boot_pass, init_boot_fail = boot_results.return_total_pass_fail()
if ffdc_only:
gp.qprint_timen("Caller requested ffdc_only.")
pre_boot_plug_in_setup()
grk.run_key_u("my_ffdc")
return
# Process caller's boot_stack.
while (len(boot_stack) > 0):
test_loop_body()
gp.qprint_timen("Finished processing stack.")
# Process caller's boot_list.
if len(boot_list) > 0:
for ix in range(1, max_num_tests + 1):
test_loop_body()
gp.qprint_timen("Completed all requested boot tests.")
boot_pass, boot_fail = boot_results.return_total_pass_fail()
new_fail = boot_fail - init_boot_fail
if new_fail > boot_fail_threshold:
error_message = "Boot failures exceed the boot failure" +\
" threshold:\n" +\
gp.sprint_var(new_fail) +\
gp.sprint_var(boot_fail_threshold)
BuiltIn().fail(gp.sprint_error(error_message))
def process_pgm_parms():
r"""
Process the program parameters by assigning them all to corresponding
globals. Also, set some global values that depend on program parameters.
"""
# Program parameter processing.
# Assign all program parms to python variables which are global to this
# module.
global parm_list
parm_list = BuiltIn().get_variable_value("${parm_list}")
# The following subset of parms should be processed as integers.
int_list = ['max_num_tests', 'boot_pass', 'boot_fail', 'ffdc_only',
'boot_fail_threshold', 'delete_errlogs', 'quiet', 'test_mode',
'debug']
for parm in parm_list:
if parm in int_list:
sub_cmd = "int(BuiltIn().get_variable_value(\"${" + parm +\
"}\", \"0\"))"
else:
sub_cmd = "BuiltIn().get_variable_value(\"${" + parm + "}\")"
cmd_buf = "global " + parm + " ; " + parm + " = " + sub_cmd
gp.dpissuing(cmd_buf)
exec(cmd_buf)
if re.match(r".*_host$", parm):
cmd_buf = "process_host(" + parm + ", '" + parm + "')"
exec(cmd_buf)
if re.match(r".*_password$", parm):
# Register the value of any parm whose name ends in _password.
# This will cause the print functions to replace passwords with
# asterisks in the output.
cmd_buf = "gp.register_passwords(" + parm + ")"
exec(cmd_buf)
global ffdc_dir_path_style
global boot_list
global boot_stack
global boot_results_file_path
global boot_results
global ffdc_list_file_path
global ffdc_report_list_path
global ffdc_summary_list_path
if ffdc_dir_path_style == "":
ffdc_dir_path_style = int(os.environ.get('FFDC_DIR_PATH_STYLE', '0'))
# Convert these program parms to lists for easier processing..
boot_list = filter(None, boot_list.split(":"))
boot_stack = filter(None, boot_stack.split(":"))
cleanup_boot_results_file()
boot_results_file_path = create_boot_results_file_path(pgm_name,
openbmc_nickname,
master_pid)
if os.path.isfile(boot_results_file_path):
# We've been called before in this run so we'll load the saved
# boot_results object.
boot_results = pickle.load(open(boot_results_file_path, 'rb'))
else:
boot_results = boot_results(boot_table, boot_pass, boot_fail)
ffdc_list_file_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_FILE_LIST"
ffdc_report_list_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_REPORT_FILE_LIST"
ffdc_summary_list_path = base_tool_dir_path + openbmc_nickname +\
"/FFDC_SUMMARY_FILE_LIST"
