def __init__(self, bitrate,
constellation, samples_per_symbol,
differential, excess_bw, gray_coded,
freq_bw, timing_bw, phase_bw,
verbose, log):
gr.hier_block2.__init__(self, "bert_receive",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
self._bitrate = bitrate
self._demod = digital.generic_demod(constellation, samples_per_symbol,
differential, excess_bw, gray_coded,
freq_bw, timing_bw, phase_bw,
verbose, log)
self._symbol_rate = self._bitrate * self._demod.bits_per_symbol()
self._sample_rate = self._symbol_rate * samples_per_symbol
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0/self._symbol_rate)
self.connect(self._demod.time_recov, self._snr_probe)
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0/self._symbol_rate)
self.connect(self, self._demod, self._descrambler, self._ber)
def __init__(self, bitrate, constellation, samples_per_symbol,
differential, excess_bw, gray_coded, freq_bw, timing_bw,
phase_bw, verbose, log):
gr.hier_block2.__init__(
self,
"bert_receive",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
self._bitrate = bitrate
self._demod = digital.generic_demod(constellation, samples_per_symbol,
differential, excess_bw,
gray_coded, freq_bw, timing_bw,
phase_bw, verbose, log)
self._symbol_rate = self._bitrate * self._demod.bits_per_symbol()
self._sample_rate = self._symbol_rate * samples_per_symbol
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0 / self._symbol_rate)
self.connect(self._demod.time_recov, self._snr_probe)
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F,
7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0 / self._symbol_rate)
self.connect(self, self._demod, self._descrambler, self._ber)
def __init__(self, type, alpha, probe_rate): """ Type can be "snr", "signal_mean", or "noise_variance" """ #create block probe_block = gr.probe_mpsk_snr_c(alpha) #forward callbacks self.set_alpha = probe_block.set_alpha #init _probe_base.__init__(self, probe_block, getattr(probe_block, type), probe_rate)
def __init__(self,
if_rate, # Incoming sample rate
symbol_rate, # Original symbol rate
excess_bw, # RRC excess bandwidth, typically 0.35-0.5
costas_alpha, # Costas loop 1st order gain, typically 0.01-0.2
costas_beta, # Costas loop 2nd order gain, typically alpha^2/4.0
costas_max, # Costas loop max frequency offset in radians/sample
mm_gain_mu, # M&M loop 1st order gain, typically 0.001-0.2
mm_gain_omega, # M&M loop 2nd order gain, typically alpha^2/4.0
mm_omega_limit, # M&M loop max timing error
):
gr.hier_block2.__init__(self, "receive_path",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
grc_wxgui.top_block_gui.__init__(self, title="Top Block")
self._if_rate = if_rate
self._sps = int(self._if_rate/symbol_rate)
print "IF sample rate:", n2s(self._if_rate)
print "Symbol rate:", n2s(symbol_rate)
print "Samples/symbol:", self._sps
print "RRC bandwidth:", excess_bw
# Create AGC to scale input to unity
self._agc = gr.agc_cc(1e-5, 1.0, 1.0, 1.0)
# Create RRC with specified excess bandwidth
taps = gr.firdes.root_raised_cosine(1.0, # Gain
self._sps, # Sampling rate
1.0, # Symbol rate
excess_bw, # Roll-off factor
11*self._sps) # Number of taps
self._rrc = gr.fir_filter_ccf(1, taps)
# Create a Costas loop frequency/phase recovery block
print "Costas alpha:", costas_alpha
print "Costas beta:", costas_beta
print "Costas max:", costas_max
self._costas = gr.costas_loop_cc(costas_alpha, # PLL first order gain
costas_beta, # PLL second order gain
costas_max, # Max frequency offset rad/sample
-costas_max, # Min frequency offset rad/sample
2) # BPSK
# Create a M&M bit synchronization retiming block
mm_mu = 0.5
mm_omega = self._sps
print "MM gain mu:", mm_gain_mu
print "MM gain omega:", mm_gain_omega
print "MM omega limit:", mm_omega_limit
self._mm = gr.clock_recovery_mm_cc(mm_omega, # Initial samples/symbol
mm_gain_omega, # Second order gain
mm_mu, # Initial symbol phase
mm_gain_mu, # First order gain
mm_omega_limit) # Maximum timing offset
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0/symbol_rate)
# #Null for recuperate the out of snr
# self.gr_null_sink_0 = gr.null_sink(gr.sizeof_double)
#
# self.connect(self._snr_probe, (self.gr_null_sink_0,0))
self.connect(self._mm, self._snr_probe)
# Slice the resulting constellation into bits.
# Get inphase channel and make decision about 0
self._c2r = gr.complex_to_real()
self._slicer = gr.binary_slicer_fb()
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0/symbol_rate)
# #Null for recuperate the out of ber
# self.gr_null_sink_1 = gr.null_sink(gr.sizeof_double)
#
# self.connect(self._ber, self.gr_null_sink_1)
self.create_number_sink(self._sps)
self.connect((self._snr_probe, 0), (self.wxgui_numbersink2_0, 0))
self.connect((self._ber, 0), (self.wxgui_numbersink2_1, 0))
self.connect(self, self._agc, self._rrc, self._costas, self._mm,
self._c2r, self._slicer, self._descrambler, self._ber)
def __init__(self,
if_rate, # Incoming sample rate
symbol_rate, # Original symbol rate
excess_bw, # RRC excess bandwidth, typically 0.35-0.5
costas_alpha, # Costas loop 1st order gain, typically 0.01-0.2
costas_beta, # Costas loop 2nd order gain, typically alpha^2/4.0
costas_max, # Costas loop max frequency offset in radians/sample
mm_gain_mu, # M&M loop 1st order gain, typically 0.001-0.2
mm_gain_omega, # M&M loop 2nd order gain, typically alpha^2/4.0
mm_omega_limit, # M&M loop max timing error
):
gr.hier_block2.__init__(self, "receive_path",
gr.io_signature(1, 1, gr.sizeof_gr_complex), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
self._if_rate = if_rate
self._sps = int(self._if_rate/symbol_rate)
print "IF sample rate:", n2s(self._if_rate)
print "Symbol rate:", n2s(symbol_rate)
print "Samples/symbol:", self._sps
print "RRC bandwidth:", excess_bw
# Create AGC to scale input to unity
self._agc = gr.agc_cc(1e-5, 1.0, 1.0, 1.0)
# Create RRC with specified excess bandwidth
taps = gr.firdes.root_raised_cosine(1.0, # Gain
self._sps, # Sampling rate
1.0, # Symbol rate
excess_bw, # Roll-off factor
11*self._sps) # Number of taps
self._rrc = gr.fir_filter_ccf(1, taps)
# Create a Costas loop frequency/phase recovery block
print "Costas alpha:", costas_alpha
print "Costas beta:", costas_beta
print "Costas max:", costas_max
self._costas = gr.costas_loop_cc(costas_alpha, # PLL first order gain
costas_beta, # PLL second order gain
costas_max, # Max frequency offset rad/sample
-costas_max, # Min frequency offset rad/sample
2) # BPSK
# Create a M&M bit synchronization retiming block
mm_mu = 0.5
mm_omega = self._sps
print "MM gain mu:", mm_gain_mu
print "MM gain omega:", mm_gain_omega
print "MM omega limit:", mm_omega_limit
self._mm = gr.clock_recovery_mm_cc(mm_omega, # Initial samples/symbol
mm_gain_omega, # Second order gain
mm_mu, # Initial symbol phase
mm_gain_mu, # First order gain
mm_omega_limit) # Maximum timing offset
# Add an SNR probe on the demodulated constellation
self._snr_probe = gr.probe_mpsk_snr_c(10.0/symbol_rate)
self.connect(self._mm, self._snr_probe)
# Slice the resulting constellation into bits.
# Get inphase channel and make decision about 0
self._c2r = gr.complex_to_real()
self._slicer = gr.binary_slicer_fb()
# Descramble BERT sequence. A channel error will create 3 incorrect bits
self._descrambler = gr.descrambler_bb(0x8A, 0x7F, 7) # CCSDS 7-bit descrambler
# Measure BER by the density of 0s in the stream
self._ber = gr.probe_density_b(1.0/symbol_rate)
self.connect(self, self._agc, self._rrc, self._costas, self._mm,
self._c2r, self._slicer, self._descrambler, self._ber)
