def __init__(self,
ksl,
gd,
nvalence,
setups,
bd,
dtype,
world,
kd,
kptband_comm,
timer,
atomic_hamiltonian=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd, dtype, world,
kd, kptband_comm, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
if atomic_hamiltonian is None:
if ksl.using_blacs:
atomic_hamiltonian = 'distributed'
else:
atomic_hamiltonian = 'dense'
if isinstance(atomic_hamiltonian, str):
atomic_hamiltonian = get_atomic_hamiltonian(atomic_hamiltonian)
self.atomic_hamiltonian = atomic_hamiltonian
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(
gd, [setup.phit_j for setup in setups], kd, dtype=dtype, cut=True)
def __init__(self, ksl, gd, nvalence, setups, bd,
dtype, world, kd, timer=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd,
dtype, world, kd, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(gd,
[setup.phit_j
for setup in setups],
kd,
cut=True)
def __init__(self, ksl, gd, nvalence, setups, bd,
dtype, world, kd, timer=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd,
dtype, world, kd, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(gd,
[setup.phit_j
for setup in setups],
kd.comm,
cut=True)
if not kd.gamma:
self.basis_functions.set_k_points(kd.ibzk_qc)
def get_lcao_projections_HSP(calc, bfs=None, spin=0, projectionsonly=True):
"""Some title.
if projectionsonly is True, return the projections::
V_qnM = <psi_qn | Phi_qM>
else, also return the Hamiltonian, overlap, and projector overlaps::
H_qMM = <Phi_qM| H |Phi_qM'>
S_qMM = <Phi_qM|Phi_qM'>
P_aqMi = <pt^a_qi|Phi_qM>
"""
if calc.wfs.kpt_comm.size != 1:
raise NotImplementedError('Parallelization over spin/kpt not '
'implemented yet.')
spos_ac = calc.atoms.get_scaled_positions() % 1.
comm = calc.wfs.gd.comm
nq = len(calc.wfs.ibzk_qc)
Nk = calc.wfs.nibzkpts
nao = calc.wfs.setups.nao
dtype = calc.wfs.dtype
if bfs is None:
bfs = get_bfs(calc)
tci = TwoCenterIntegrals(calc.wfs.gd.cell_cv,
calc.wfs.gd.pbc_c,
calc.wfs.setups,
calc.wfs.ibzk_qc,
calc.wfs.gamma)
# Calculate projector overlaps, and (lower triangle of-) S and T matrices
S_qMM = np.zeros((nq, nao, nao), dtype)
T_qMM = np.zeros((nq, nao, nao), dtype)
P_aqMi = {}
for a in bfs.my_atom_indices:
ni = calc.wfs.setups[a].ni
P_aqMi[a] = np.zeros((nq, nao, ni), dtype)
tci.calculate(spos_ac, S_qMM, T_qMM, P_aqMi)
add_paw_correction_to_overlap(calc.wfs.setups, P_aqMi, S_qMM)
calc.wfs.gd.comm.sum(S_qMM)
calc.wfs.gd.comm.sum(T_qMM)
# Calculate projections
V_qnM = np.zeros((nq, calc.wfs.bd.nbands, nao), dtype)
for kpt in calc.wfs.kpt_u:
if kpt.s != spin:
continue
V_nM = V_qnM[kpt.q]
#bfs.integrate2(kpt.psit_nG[:], V_nM, kpt.q) # all bands to save time
for n, V_M in enumerate(V_nM): # band-by-band to save memory
bfs.integrate2(kpt.psit_nG[n][:], V_M, kpt.q)
for a, P_ni in kpt.P_ani.items():
dS_ii = calc.wfs.setups[a].dO_ii
P_Mi = P_aqMi[a][kpt.q]
V_nM += np.dot(P_ni, np.inner(dS_ii, P_Mi).conj())
comm.sum(V_qnM)
if projectionsonly:
return V_qnM
# Determine potential matrix
vt_G = calc.hamiltonian.vt_sG[spin]
H_qMM = np.zeros((nq, nao, nao), dtype)
for q, H_MM in enumerate(H_qMM):
bfs.calculate_potential_matrix(vt_G, H_MM, q)
# Make Hamiltonian as sum of kinetic (T) and potential (V) matrices
# and add atomic corrections
for a, P_qMi in P_aqMi.items():
dH_ii = unpack(calc.hamiltonian.dH_asp[a][spin])
for P_Mi, H_MM in zip(P_qMi, H_qMM):
H_MM += np.dot(P_Mi, np.inner(dH_ii, P_Mi).conj())
comm.sum(H_qMM)
H_qMM += T_qMM
# Fill in the upper triangles of H and S
for H_MM, S_MM in zip(H_qMM, S_qMM):
tri2full(H_MM)
tri2full(S_MM)
H_qMM *= Hartree
return V_qnM, H_qMM, S_qMM, P_aqMi
def get_lcao_projections_HSP(calc, bfs=None, spin=0, projectionsonly=True):
"""Some title.
if projectionsonly is True, return the projections::
V_qnM = <psi_qn | Phi_qM>
else, also return the Hamiltonian, overlap, and projector overlaps::
H_qMM = <Phi_qM| H |Phi_qM'>
S_qMM = <Phi_qM|Phi_qM'>
P_aqMi = <pt^a_qi|Phi_qM>
"""
if calc.wfs.kd.comm.size != 1:
raise NotImplementedError('Parallelization over spin/kpt not '
'implemented yet.')
spos_ac = calc.atoms.get_scaled_positions() % 1.
comm = calc.wfs.gd.comm
nq = len(calc.wfs.kd.ibzk_qc)
Nk = calc.wfs.kd.nibzkpts
nao = calc.wfs.setups.nao
dtype = calc.wfs.dtype
if bfs is None:
bfs = get_bfs(calc)
tci = TwoCenterIntegrals(calc.wfs.gd.cell_cv, calc.wfs.gd.pbc_c,
calc.wfs.setups, calc.wfs.kd.ibzk_qc,
calc.wfs.kd.gamma)
# Calculate projector overlaps, and (lower triangle of-) S and T matrices
S_qMM = np.zeros((nq, nao, nao), dtype)
T_qMM = np.zeros((nq, nao, nao), dtype)
P_aqMi = {}
for a in bfs.my_atom_indices:
ni = calc.wfs.setups[a].ni
P_aqMi[a] = np.zeros((nq, nao, ni), dtype)
tci.calculate(spos_ac, S_qMM, T_qMM, P_aqMi)
add_paw_correction_to_overlap(calc.wfs.setups, P_aqMi, S_qMM)
calc.wfs.gd.comm.sum(S_qMM)
calc.wfs.gd.comm.sum(T_qMM)
# Calculate projections
V_qnM = np.zeros((nq, calc.wfs.bd.nbands, nao), dtype)
for kpt in calc.wfs.kpt_u:
if kpt.s != spin:
continue
V_nM = V_qnM[kpt.q]
#bfs.integrate2(kpt.psit_nG[:], V_nM, kpt.q) # all bands to save time
for n, V_M in enumerate(V_nM): # band-by-band to save memory
bfs.integrate2(kpt.psit_nG[n][:], V_M, kpt.q)
for a, P_ni in kpt.P_ani.items():
dS_ii = calc.wfs.setups[a].dO_ii
P_Mi = P_aqMi[a][kpt.q]
V_nM += np.dot(P_ni, np.inner(dS_ii, P_Mi).conj())
comm.sum(V_qnM)
if projectionsonly:
return V_qnM
# Determine potential matrix
vt_G = calc.hamiltonian.vt_sG[spin]
H_qMM = np.zeros((nq, nao, nao), dtype)
for q, H_MM in enumerate(H_qMM):
bfs.calculate_potential_matrix(vt_G, H_MM, q)
# Make Hamiltonian as sum of kinetic (T) and potential (V) matrices
# and add atomic corrections
for a, P_qMi in P_aqMi.items():
dH_ii = unpack(calc.hamiltonian.dH_asp[a][spin])
for P_Mi, H_MM in zip(P_qMi, H_qMM):
H_MM += np.dot(P_Mi, np.inner(dH_ii, P_Mi).conj())
comm.sum(H_qMM)
H_qMM += T_qMM
# Fill in the upper triangles of H and S
for H_MM, S_MM in zip(H_qMM, S_qMM):
tri2full(H_MM)
tri2full(S_MM)
H_qMM *= Hartree
return V_qnM, H_qMM, S_qMM, P_aqMi
class LCAOWaveFunctions(WaveFunctions):
def __init__(self, ksl, gd, nvalence, setups, bd,
dtype, world, kd, timer=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd,
dtype, world, kd, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(gd,
[setup.phit_j
for setup in setups],
kd,
cut=True)
def empty(self, n=(), global_array=False, realspace=False):
if realspace:
return self.gd.empty(n, self.dtype, global_array)
else:
if isinstance(n, int):
n = (n,)
nao = self.setups.nao
return np.empty(n + (nao,), self.dtype)
def summary(self, fd):
fd.write('Wave functions: LCAO\n')
def set_eigensolver(self, eigensolver):
WaveFunctions.set_eigensolver(self, eigensolver)
eigensolver.initialize(self.gd, self.dtype, self.setups.nao, self.ksl)
def set_positions(self, spos_ac):
self.timer.start('Basic WFS set positions')
WaveFunctions.set_positions(self, spos_ac)
self.timer.stop('Basic WFS set positions')
self.timer.start('Basis functions set positions')
self.basis_functions.set_positions(spos_ac)
self.timer.stop('Basis functions set positions')
if self.ksl is not None:
self.basis_functions.set_matrix_distribution(self.ksl.Mstart,
self.ksl.Mstop)
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
mynbands = self.bd.mynbands
Mstop = self.ksl.Mstop
Mstart = self.ksl.Mstart
mynao = Mstop - Mstart
if self.ksl.using_blacs: # XXX
# S and T have been distributed to a layout with blacs, so
# discard them to force reallocation from scratch.
#
# TODO: evaluate S and T when they *are* distributed, thus saving
# memory and avoiding this problem
self.S_qMM = None
self.T_qMM = None
S_qMM = self.S_qMM
T_qMM = self.T_qMM
if S_qMM is None: # XXX
# First time:
assert T_qMM is None
if self.ksl.using_blacs: # XXX
self.tci.set_matrix_distribution(Mstart, mynao)
S_qMM = np.empty((nq, mynao, nao), self.dtype)
T_qMM = np.empty((nq, mynao, nao), self.dtype)
for kpt in self.kpt_u:
if kpt.C_nM is None:
kpt.C_nM = np.empty((mynbands, nao), self.dtype)
self.allocate_arrays_for_projections(
self.basis_functions.my_atom_indices)
self.P_aqMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
self.P_aqMi[a] = np.empty((nq, nao, ni), self.dtype)
for kpt in self.kpt_u:
q = kpt.q
kpt.P_aMi = dict([(a, P_qMi[q])
for a, P_qMi in self.P_aqMi.items()])
self.timer.start('TCI: Calculate S, T, P')
# Calculate lower triangle of S and T matrices:
self.tci.calculate(spos_ac, S_qMM, T_qMM, self.P_aqMi)
add_paw_correction_to_overlap(self.setups, self.P_aqMi, S_qMM,
self.ksl.Mstart, self.ksl.Mstop)
self.timer.stop('TCI: Calculate S, T, P')
S_MM = None # allow garbage collection of old S_qMM after redist
S_qMM = self.ksl.distribute_overlap_matrix(S_qMM)
T_qMM = self.ksl.distribute_overlap_matrix(T_qMM)
for kpt in self.kpt_u:
q = kpt.q
kpt.S_MM = S_qMM[q]
kpt.T_MM = T_qMM[q]
if (debug and self.band_comm.size == 1 and self.gd.comm.rank == 0 and
nao > 0 and not self.ksl.using_blacs):
# S and T are summed only on comm master, so check only there
from numpy.linalg import eigvalsh
self.timer.start('Check positive definiteness')
for S_MM in S_qMM:
tri2full(S_MM, UL='L')
smin = eigvalsh(S_MM).real.min()
if smin < 0:
raise RuntimeError('Overlap matrix has negative '
'eigenvalue: %e' % smin)
self.timer.stop('Check positive definiteness')
self.positions_set = True
self.S_qMM = S_qMM
self.T_qMM = T_qMM
def initialize(self, density, hamiltonian, spos_ac):
if density.nt_sG is None:
if self.kpt_u[0].f_n is None or self.kpt_u[0].C_nM is None:
density.initialize_from_atomic_densities(self.basis_functions)
# Initialize GLLB-potential from basis function orbitals
if hamiltonian.xc.type == 'GLLB':
hamiltonian.xc.initialize_from_atomic_orbitals(self.basis_functions)
else:
# We have the info we need for a density matrix, so initialize
# from that instead of from scratch. This will be the case
# after set_positions() during a relaxation
density.initialize_from_wavefunctions(self)
else:
# After a restart, nt_sg doesn't exist yet, so we'll have to
# make sure it does. Of course, this should have been taken care
# of already by this time, so we should improve the code elsewhere
density.calculate_normalized_charges_and_mix()
hamiltonian.update(density)
def initialize_wave_functions_from_lcao(self):
"""
Fill the calc.wfs.kpt_[u].psit_nG arrays with usefull data.
Normally psit_nG is NOT used in lcao mode, but some extensions
(like ase.dft.wannier) want to have it.
This code is adapted from fd.py / initialize_from_lcao_coefficients()
and fills psit_nG with data constructed from the current lcao
coefficients (kpt.C_nM).
(This may or may not work in band-parallel case!)
"""
#print('initialize_wave_functions_from_lcao')
bfs = self.basis_functions
for kpt in self.kpt_u:
#print("kpt: {0}".format(kpt))
kpt.psit_nG = self.gd.zeros(self.bd.nbands, self.dtype)
bfs.lcao_to_grid(kpt.C_nM, kpt.psit_nG[:self.bd.mynbands], kpt.q)
# kpt.C_nM = None
#
def initialize_wave_functions_from_restart_file(self):
"""Dummy function to ensure compatibility to fd mode"""
self.initialize_wave_functions_from_lcao()
#
def calculate_density_matrix(self, f_n, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix(f_n, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
# ----------------------------
if 1:
# XXX Should not conjugate, but call gemm(..., 'c')
# Although that requires knowing C_Mn and not C_nM.
# that also conforms better to the usual conventions in literature
Cf_Mn = C_nM.T.conj() * f_n
self.timer.start('gemm')
gemm(1.0, C_nM, Cf_Mn, 0.0, rho_MM, 'n')
self.timer.stop('gemm')
self.timer.start('band comm sum')
self.bd.comm.sum(rho_MM)
self.timer.stop('band comm sum')
else:
# Alternative suggestion. Might be faster. Someone should test this
from gpaw.utilities.blas import r2k
C_Mn = C_nM.T.copy()
r2k(0.5, C_Mn, f_n * C_Mn, 0.0, rho_MM)
tri2full(rho_MM)
def calculate_density_matrix_delta(self, d_nn, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix_delta(d_nn, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
def add_to_density_from_k_point_with_occupation(self, nt_sG, kpt, f_n):
"""Add contribution to pseudo electron-density. Do not use the standard
occupation numbers, but ones given with argument f_n."""
# Custom occupations are used in calculation of response potential
# with GLLB-potential
if kpt.rho_MM is None:
rho_MM = self.calculate_density_matrix(f_n, kpt.C_nM)
if hasattr(kpt, 'c_on'):
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands),
dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
assert abs(c_n.imag).max() < 1e-14
d_nn += ne * np.outer(c_n.conj(), c_n).real
rho_MM += self.calculate_density_matrix_delta(d_nn, kpt.C_nM)
else:
rho_MM = kpt.rho_MM
self.timer.start('Construct density')
self.basis_functions.construct_density(rho_MM, nt_sG[kpt.s], kpt.q)
self.timer.stop('Construct density')
def add_to_kinetic_density_from_k_point(self, taut_G, kpt):
raise NotImplementedError('Kinetic density calculation for LCAO '
'wavefunctions is not implemented.')
def calculate_forces(self, hamiltonian, F_av):
self.timer.start('LCAO forces')
spos_ac = self.tci.atoms.get_scaled_positions() % 1.0
ksl = self.ksl
nao = ksl.nao
mynao = ksl.mynao
nq = len(self.kd.ibzk_qc)
dtype = self.dtype
tci = self.tci
gd = self.gd
bfs = self.basis_functions
Mstart = ksl.Mstart
Mstop = ksl.Mstop
from gpaw.kohnsham_layouts import BlacsOrbitalLayouts
isblacs = isinstance(ksl, BlacsOrbitalLayouts) # XXX
if not isblacs:
self.timer.start('TCI derivative')
dThetadR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dTdR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dPdR_aqvMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
dPdR_aqvMi[a] = np.empty((nq, 3, nao, ni), dtype)
tci.calculate_derivative(spos_ac, dThetadR_qvMM, dTdR_qvMM,
dPdR_aqvMi)
gd.comm.sum(dThetadR_qvMM)
gd.comm.sum(dTdR_qvMM)
self.timer.stop('TCI derivative')
my_atom_indices = bfs.my_atom_indices
atom_indices = bfs.atom_indices
def _slices(indices):
for a in indices:
M1 = bfs.M_a[a] - Mstart
M2 = M1 + self.setups[a].nao
if M2 > 0:
yield a, max(0, M1), M2
def slices():
return _slices(atom_indices)
def my_slices():
return _slices(my_atom_indices)
#
# ----- -----
# \ -1 \ *
# E = ) S H rho = ) c eps f c
# mu nu / mu x x z z nu / n mu n n n nu
# ----- -----
# x z n
#
# We use the transpose of that matrix. The first form is used
# if rho is given, otherwise the coefficients are used.
self.timer.start('Initial')
rhoT_uMM = []
ET_uMM = []
if not isblacs:
if self.kpt_u[0].rho_MM is None:
self.timer.start('Get density matrix')
for kpt in self.kpt_u:
rhoT_MM = ksl.get_transposed_density_matrix(kpt.f_n,
kpt.C_nM)
rhoT_uMM.append(rhoT_MM)
ET_MM = ksl.get_transposed_density_matrix(kpt.f_n
* kpt.eps_n,
kpt.C_nM)
ET_uMM.append(ET_MM)
if hasattr(kpt, 'c_on'):
# XXX does this work with BLACS/non-BLACS/etc.?
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands), dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
d_nn += ne * np.outer(c_n.conj(), c_n)
rhoT_MM += ksl.get_transposed_density_matrix_delta(d_nn, kpt.C_nM)
ET_MM += ksl.get_transposed_density_matrix_delta(d_nn * kpt.eps_n, kpt.C_nM)
self.timer.stop('Get density matrix')
else:
rhoT_uMM = []
ET_uMM = []
for kpt in self.kpt_u:
H_MM = self.eigensolver.calculate_hamiltonian_matrix(hamiltonian, self, kpt)
tri2full(H_MM)
S_MM = kpt.S_MM.copy()
tri2full(S_MM)
ET_MM = np.linalg.solve(S_MM, gemmdot(H_MM,
kpt.rho_MM)).T.copy()
del S_MM, H_MM
rhoT_MM = kpt.rho_MM.T.copy()
rhoT_uMM.append(rhoT_MM)
ET_uMM.append(ET_MM)
self.timer.stop('Initial')
if isblacs: # XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
from gpaw.blacs import BlacsGrid, Redistributor
def get_density_matrix(f_n, C_nM, redistributor):
rho1_mm = ksl.calculate_blocked_density_matrix(f_n,
C_nM).conj()
rho_mm = redistributor.redistribute(rho1_mm)
return rho_mm
pcutoff_a = [max([pt.get_cutoff() for pt in setup.pt_j])
for setup in self.setups]
phicutoff_a = [max([phit.get_cutoff() for phit in setup.phit_j])
for setup in self.setups]
# XXX should probably use bdsize x gdsize instead
# That would be consistent with some existing grids
grid = BlacsGrid(ksl.block_comm, self.gd.comm.size,
self.bd.comm.size)
blocksize1 = -(-nao // grid.nprow)
blocksize2 = -(-nao // grid.npcol)
# XXX what are rows and columns actually?
desc = grid.new_descriptor(nao, nao, blocksize1, blocksize2)
rhoT_umm = []
ET_umm = []
redistributor = Redistributor(grid.comm, ksl.mmdescriptor, desc)
Fpot_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
self.timer.start('Get density matrix')
rhoT_mm = get_density_matrix(kpt.f_n, kpt.C_nM, redistributor)
rhoT_umm.append(rhoT_mm)
self.timer.stop('Get density matrix')
self.timer.start('Potential')
rhoT_mM = ksl.distribute_to_columns(rhoT_mm, desc)
vt_G = hamiltonian.vt_sG[kpt.s]
Fpot_av += bfs.calculate_force_contribution(vt_G, rhoT_mM,
kpt.q)
del rhoT_mM
self.timer.stop('Potential')
self.timer.start('Get density matrix')
for kpt in self.kpt_u:
ET_mm = get_density_matrix(kpt.f_n * kpt.eps_n, kpt.C_nM,
redistributor)
ET_umm.append(ET_mm)
self.timer.stop('Get density matrix')
M1start = blocksize1 * grid.myrow
M2start = blocksize2 * grid.mycol
M1stop = min(M1start + blocksize1, nao)
M2stop = min(M2start + blocksize2, nao)
m1max = M1stop - M1start
m2max = M2stop - M2start
if not isblacs:
# Kinetic energy contribution
#
# ----- d T
# a \ mu nu
# F += 2 Re ) -------- rho
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Fkin_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
dEdTrhoT_vMM = (dTdR_qvMM[kpt.q]
* rhoT_uMM[u][np.newaxis]).real
for a, M1, M2 in my_slices():
Fkin_av[a, :] += 2.0 * dEdTrhoT_vMM[:, M1:M2].sum(-1).sum(-1)
del dEdTrhoT_vMM
# Density matrix contribution due to basis overlap
#
# ----- d Theta
# a \ mu nu
# F += -2 Re ) ------------ E
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Ftheta_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
dThetadRE_vMM = (dThetadR_qvMM[kpt.q]
* ET_uMM[u][np.newaxis]).real
for a, M1, M2 in my_slices():
Ftheta_av[a, :] += -2.0 * dThetadRE_vMM[:, M1:M2].sum(-1).sum(-1)
del dThetadRE_vMM
if isblacs:
from gpaw.lcao.overlap import TwoCenterIntegralCalculator
self.timer.start('Prepare TCI loop')
M_a = bfs.M_a
Fkin2_av = np.zeros_like(F_av)
Ftheta2_av = np.zeros_like(F_av)
cell_cv = tci.atoms.cell
spos_ac = tci.atoms.get_scaled_positions() % 1.0
overlapcalc = TwoCenterIntegralCalculator(self.kd.ibzk_qc,
derivative=False)
def get_phases(offset):
return overlapcalc.phaseclass(overlapcalc.ibzk_qc, offset)
# XXX this is not parallel *AT ALL*.
self.timer.start('Get neighbors')
nl = tci.atompairs.pairs.neighbors
r_and_offset_aao = get_r_and_offsets(nl, spos_ac, cell_cv)
atompairs = r_and_offset_aao.keys()
atompairs.sort()
self.timer.stop('Get neighbors')
T_expansions = tci.T_expansions
Theta_expansions = tci.Theta_expansions
P_expansions = tci.P_expansions
nq = len(self.ibzk_qc)
dH_asp = hamiltonian.dH_asp
self.timer.start('broadcast dH')
alldH_asp = {}
for a in range(len(self.setups)):
gdrank = bfs.sphere_a[a].rank
if gdrank == gd.rank:
dH_sp = dH_asp[a]
else:
ni = self.setups[a].ni
dH_sp = np.empty((self.nspins, ni * (ni + 1) // 2))
gd.comm.broadcast(dH_sp, gdrank)
# okay, now everyone gets copies of dH_sp
alldH_asp[a] = dH_sp
self.timer.stop('broadcast dH')
# This will get sort of hairy. We need to account for some
# three-center overlaps, such as:
#
# a1
# Phi ~a3 a3 ~a3 a2 a2,a1
# < ---- |p > dH <p |Phi > rho
# dR
#
# To this end we will loop over all pairs of atoms (a1, a3),
# and then a sub-loop over (a3, a2).
from gpaw.lcao.overlap import DerivativeAtomicDisplacement
class Displacement(DerivativeAtomicDisplacement):
def __init__(self, a1, a2, R_c, offset):
phases = overlapcalc.phaseclass(overlapcalc.ibzk_qc,
offset)
DerivativeAtomicDisplacement.__init__(self, None, a1, a2,
R_c, offset, phases)
# Cache of Displacement objects with spherical harmonics with
# evaluated spherical harmonics.
disp_aao = {}
def get_displacements(a1, a2, maxdistance):
# XXX the way maxdistance is handled it can lead to
# bad caching when different maxdistances are passed
# to subsequent calls with same pair of atoms
disp_o = disp_aao.get((a1, a2))
if disp_o is None:
disp_o = []
for r, offset in r_and_offset_aao[(a1, a2)]:
if np.linalg.norm(r) > maxdistance:
continue
disp = Displacement(a1, a2, r, offset)
disp_o.append(disp)
disp_aao[(a1, a2)] = disp_o
return [disp for disp in disp_o if disp.r < maxdistance]
self.timer.stop('Prepare TCI loop')
self.timer.start('Not so complicated loop')
for (a1, a2) in atompairs:
if a1 >= a2:
# Actually this leads to bad load balance.
# We should take a1 > a2 or a1 < a2 equally many times.
# Maybe decide which of these choices
# depending on whether a2 % 1 == 0
continue
m1start = M_a[a1] - M1start
m2start = M_a[a2] - M2start
if m1start >= blocksize1 or m2start >= blocksize2:
continue
T_expansion = T_expansions.get(a1, a2)
Theta_expansion = Theta_expansions.get(a1, a2)
P_expansion = P_expansions.get(a1, a2)
nm1, nm2 = T_expansion.shape
m1stop = min(m1start + nm1, m1max)
m2stop = min(m2start + nm2, m2max)
if m1stop <= 0 or m2stop <= 0:
continue
m1start = max(m1start, 0)
m2start = max(m2start, 0)
J1start = max(0, M1start - M_a[a1])
J2start = max(0, M2start - M_a[a2])
M1stop = J1start + m1stop - m1start
J2stop = J2start + m2stop - m2start
dTdR_qvmm = T_expansion.zeros((nq, 3), dtype=dtype)
dThetadR_qvmm = Theta_expansion.zeros((nq, 3), dtype=dtype)
disp_o = get_displacements(a1, a2,
phicutoff_a[a1] + phicutoff_a[a2])
for disp in disp_o:
disp.evaluate_overlap(T_expansion, dTdR_qvmm)
disp.evaluate_overlap(Theta_expansion, dThetadR_qvmm)
for u, kpt in enumerate(self.kpt_u):
rhoT_mm = rhoT_umm[u][m1start:m1stop, m2start:m2stop]
ET_mm = ET_umm[u][m1start:m1stop, m2start:m2stop]
Fkin_v = 2.0 * (dTdR_qvmm[kpt.q][:, J1start:M1stop,
J2start:J2stop]
* rhoT_mm[np.newaxis]).real.sum(-1).sum(-1)
Ftheta_v = 2.0 * (dThetadR_qvmm[kpt.q][:, J1start:M1stop,
J2start:J2stop]
* ET_mm[np.newaxis]).real.sum(-1).sum(-1)
Fkin2_av[a1] += Fkin_v
Fkin2_av[a2] -= Fkin_v
Ftheta2_av[a1] -= Ftheta_v
Ftheta2_av[a2] += Ftheta_v
Fkin_av = Fkin2_av
Ftheta_av = Ftheta2_av
self.timer.stop('Not so complicated loop')
dHP_and_dSP_aauim = {}
a2values = {}
for (a2, a3) in atompairs:
if not a3 in a2values:
a2values[a3] = []
a2values[a3].append(a2)
Fatom_av = np.zeros_like(F_av)
Frho_av = np.zeros_like(F_av)
self.timer.start('Complicated loop')
for a1, a3 in atompairs:
if a1 == a3:
continue
m1start = M_a[a1] - M1start
if m1start >= blocksize1:
continue
P_expansion = P_expansions.get(a1, a3)
nm1 = P_expansion.shape[0]
m1stop = min(m1start + nm1, m1max)
if m1stop <= 0:
continue
m1start = max(m1start, 0)
J1start = max(0, M1start - M_a[a1])
J1stop = J1start + m1stop - m1start
disp_o = get_displacements(a1, a3,
phicutoff_a[a1] + pcutoff_a[a3])
if len(disp_o) == 0:
continue
dPdR_qvmi = P_expansion.zeros((nq, 3), dtype=dtype)
for disp in disp_o:
disp.evaluate_overlap(P_expansion, dPdR_qvmi)
dPdR_qvmi = dPdR_qvmi[:, :, J1start:J1stop, :].copy()
for a2 in a2values[a3]:
m2start = M_a[a2] - M2start
if m2start >= blocksize2:
continue
P_expansion2 = P_expansions.get(a2, a3)
nm2 = P_expansion2.shape[0]
m2stop = min(m2start + nm2, m2max)
if m2stop <= 0:
continue
disp_o = get_displacements(a2, a3,
phicutoff_a[a2] + pcutoff_a[a3])
if len(disp_o) == 0:
continue
m2start = max(m2start, 0)
J2start = max(0, M2start - M_a[a2])
J2stop = J2start + m2stop - m2start
if (a2, a3) in dHP_and_dSP_aauim:
dHP_uim, dSP_uim = dHP_and_dSP_aauim[(a2, a3)]
else:
P_qmi = P_expansion2.zeros((nq,), dtype=dtype)
for disp in disp_o:
disp.evaluate_direct(P_expansion2, P_qmi)
P_qmi = P_qmi[:, J2start:J2stop].copy()
dH_sp = alldH_asp[a3]
dS_ii = self.setups[a3].dO_ii
dHP_uim = []
dSP_uim = []
for u, kpt in enumerate(self.kpt_u):
dH_ii = unpack(dH_sp[kpt.s])
dHP_im = np.dot(P_qmi[kpt.q], dH_ii).T.conj()
# XXX only need nq of these
dSP_im = np.dot(P_qmi[kpt.q], dS_ii).T.conj()
dHP_uim.append(dHP_im)
dSP_uim.append(dSP_im)
dHP_and_dSP_aauim[(a2, a3)] = dHP_uim, dSP_uim
for u, kpt in enumerate(self.kpt_u):
rhoT_mm = rhoT_umm[u][m1start:m1stop, m2start:m2stop]
ET_mm = ET_umm[u][m1start:m1stop, m2start:m2stop]
dPdRdHP_vmm = np.dot(dPdR_qvmi[kpt.q], dHP_uim[u])
dPdRdSP_vmm = np.dot(dPdR_qvmi[kpt.q], dSP_uim[u])
Fatom_c = 2.0 * (dPdRdHP_vmm
* rhoT_mm).real.sum(-1).sum(-1)
Frho_c = 2.0 * (dPdRdSP_vmm
* ET_mm).real.sum(-1).sum(-1)
Fatom_av[a1] += Fatom_c
Fatom_av[a3] -= Fatom_c
Frho_av[a1] -= Frho_c
Frho_av[a3] += Frho_c
self.timer.stop('Complicated loop')
if not isblacs:
# Potential contribution
#
# ----- / d Phi (r)
# a \ | mu ~
# F += -2 Re ) | ---------- v (r) Phi (r) dr rho
# / | d R nu nu mu
# ----- / a
# mu in a; nu
#
self.timer.start('Potential')
Fpot_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
vt_G = hamiltonian.vt_sG[kpt.s]
Fpot_av += bfs.calculate_force_contribution(vt_G, rhoT_uMM[u],
kpt.q)
self.timer.stop('Potential')
# Density matrix contribution from PAW correction
#
# ----- -----
# a \ a \ b
# F += 2 Re ) Z E - 2 Re ) Z E
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# with
# b*
# ----- dP
# b \ i mu b b
# Z = ) -------- dS P
# mu nu / dR ij j nu
# ----- b mu
# ij
#
self.timer.start('Paw correction')
Frho_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
work_MM = np.zeros((mynao, nao), dtype)
ZE_MM = None
for b in my_atom_indices:
setup = self.setups[b]
dO_ii = np.asarray(setup.dO_ii, dtype)
dOP_iM = np.zeros((setup.ni, nao), dtype)
gemm(1.0, self.P_aqMi[b][kpt.q], dO_ii, 0.0, dOP_iM, 'c')
for v in range(3):
gemm(1.0, dOP_iM, dPdR_aqvMi[b][kpt.q][v][Mstart:Mstop],
0.0, work_MM, 'n')
ZE_MM = (work_MM * ET_uMM[u]).real
for a, M1, M2 in slices():
dE = 2 * ZE_MM[M1:M2].sum()
Frho_av[a, v] -= dE # the "b; mu in a; nu" term
Frho_av[b, v] += dE # the "mu nu" term
del work_MM, ZE_MM
self.timer.stop('Paw correction')
# Atomic density contribution
# ----- -----
# a \ a \ b
# F += -2 Re ) A rho + 2 Re ) A rho
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# b*
# ----- d P
# b \ i mu b b
# A = ) ------- dH P
# mu nu / d R ij j nu
# ----- b mu
# ij
#
self.timer.start('Atomic Hamiltonian force')
Fatom_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
for b in my_atom_indices:
H_ii = np.asarray(unpack(hamiltonian.dH_asp[b][kpt.s]), dtype)
HP_iM = gemmdot(H_ii,
np.ascontiguousarray(self.P_aqMi[b][kpt.q].T.conj()))
for v in range(3):
dPdR_Mi = dPdR_aqvMi[b][kpt.q][v][Mstart:Mstop]
ArhoT_MM = (gemmdot(dPdR_Mi, HP_iM) * rhoT_uMM[u]).real
for a, M1, M2 in slices():
dE = 2 * ArhoT_MM[M1:M2].sum()
Fatom_av[a, v] += dE # the "b; mu in a; nu" term
Fatom_av[b, v] -= dE # the "mu nu" term
self.timer.stop('Atomic Hamiltonian force')
F_av += Fkin_av + Fpot_av + Ftheta_av + Frho_av + Fatom_av
self.timer.start('Wait for sum')
ksl.orbital_comm.sum(F_av)
if self.bd.comm.rank == 0:
self.kpt_comm.sum(F_av, 0)
self.timer.stop('Wait for sum')
self.timer.stop('LCAO forces')
def _get_wave_function_array(self, u, n, realspace=True):
kpt = self.kpt_u[u]
if kpt.C_nM is None:
# Hack to make sure things are available after restart
self.lazyloader.load(self)
C_M = kpt.C_nM[n]
if realspace:
psit_G = self.gd.zeros(dtype=self.dtype)
self.basis_functions.lcao_to_grid(C_M, psit_G, kpt.q)
return psit_G
else:
return C_M
def load_lazily(self, hamiltonian, spos_ac):
"""Horrible hack to recalculate lcao coefficients after restart."""
self.basis_functions.set_positions(spos_ac)
class LazyLoader:
def __init__(self, hamiltonian, spos_ac):
self.spos_ac = spos_ac
def load(self, wfs):
wfs.set_positions(self.spos_ac) # this sets rank_a
# Now we need to pass wfs.rank_a or things to work
# XXX WTF why does one have to fiddle with rank_a???
hamiltonian.set_positions(self.spos_ac, wfs.rank_a)
wfs.eigensolver.iterate(hamiltonian, wfs)
del wfs.lazyloader
self.lazyloader = LazyLoader(hamiltonian, spos_ac)
def write(self, writer, write_wave_functions=False):
writer['Mode'] = 'lcao'
if not write_wave_functions:
return
writer.dimension('nbasis', self.setups.nao)
writer.add('WaveFunctionCoefficients',
('nspins', 'nibzkpts', 'nbands', 'nbasis'),
dtype=self.dtype)
for s in range(self.nspins):
for k in range(self.nibzkpts):
C_nM = self.collect_array('C_nM', k, s)
writer.fill(C_nM, s, k)
def read_coefficients(self, reader):
for kpt in self.kpt_u:
kpt.C_nM = self.bd.empty(self.setups.nao, dtype=self.dtype)
for myn, C_M in enumerate(kpt.C_nM):
n = self.bd.global_index(myn)
C_M[:] = reader.get('WaveFunctionCoefficients',
kpt.s, kpt.k, n)
def estimate_memory(self, mem):
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
ni_total = sum([setup.ni for setup in self.setups])
itemsize = mem.itemsize[self.dtype]
mem.subnode('C [qnM]', nq * self.bd.mynbands * nao * itemsize)
nM1, nM2 = self.ksl.get_overlap_matrix_shape()
mem.subnode('S, T [2 x qmm]', 2 * nq * nM1 * nM2 * itemsize)
mem.subnode('P [aqMi]', nq * nao * ni_total // self.gd.comm.size)
self.tci.estimate_memory(mem.subnode('TCI'))
self.basis_functions.estimate_memory(mem.subnode('BasisFunctions'))
self.eigensolver.estimate_memory(mem.subnode('Eigensolver'),
self.dtype)
class LCAOWaveFunctions(WaveFunctions):
def __init__(self, ksl, gd, nvalence, setups, bd,
dtype, world, kd, timer=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd,
dtype, world, kd, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(gd,
[setup.phit_j
for setup in setups],
kd.comm,
cut=True)
if not kd.gamma:
self.basis_functions.set_k_points(kd.ibzk_qc)
def summary(self, fd):
fd.write('Mode: LCAO\n')
def set_eigensolver(self, eigensolver):
WaveFunctions.set_eigensolver(self, eigensolver)
eigensolver.initialize(self.gd, self.dtype, self.setups.nao, self.ksl)
def set_positions(self, spos_ac):
self.timer.start('Basic WFS set positions')
WaveFunctions.set_positions(self, spos_ac)
self.timer.stop('Basic WFS set positions')
self.timer.start('Basis functions set positions')
self.basis_functions.set_positions(spos_ac)
self.timer.stop('Basis functions set positions')
if self.ksl is not None:
self.basis_functions.set_matrix_distribution(self.ksl.Mstart,
self.ksl.Mstop)
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
mynbands = self.mynbands
Mstop = self.ksl.Mstop
Mstart = self.ksl.Mstart
mynao = Mstop - Mstart
if self.ksl.using_blacs: # XXX
# S and T have been distributed to a layout with blacs, so
# discard them to force reallocation from scratch.
#
# TODO: evaluate S and T when they *are* distributed, thus saving
# memory and avoiding this problem
self.S_qMM = None
self.T_qMM = None
S_qMM = self.S_qMM
T_qMM = self.T_qMM
if S_qMM is None: # XXX
# First time:
assert T_qMM is None
if self.ksl.using_blacs: # XXX
self.tci.set_matrix_distribution(Mstart, mynao)
S_qMM = np.empty((nq, mynao, nao), self.dtype)
T_qMM = np.empty((nq, mynao, nao), self.dtype)
for kpt in self.kpt_u:
if kpt.C_nM is None:
kpt.C_nM = np.empty((mynbands, nao), self.dtype)
self.allocate_arrays_for_projections(
self.basis_functions.my_atom_indices)
self.P_aqMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
self.P_aqMi[a] = np.empty((nq, nao, ni), self.dtype)
for kpt in self.kpt_u:
q = kpt.q
kpt.P_aMi = dict([(a, P_qMi[q])
for a, P_qMi in self.P_aqMi.items()])
self.timer.start('TCI: Calculate S, T, P')
# Calculate lower triangle of S and T matrices:
self.tci.calculate(spos_ac, S_qMM, T_qMM, self.P_aqMi)
add_paw_correction_to_overlap(self.setups, self.P_aqMi, S_qMM,
self.ksl.Mstart, self.ksl.Mstop)
self.timer.stop('TCI: Calculate S, T, P')
S_MM = None # allow garbage collection of old S_qMM after redist
S_qMM = self.ksl.distribute_overlap_matrix(S_qMM)
T_qMM = self.ksl.distribute_overlap_matrix(T_qMM)
for kpt in self.kpt_u:
q = kpt.q
kpt.S_MM = S_qMM[q]
kpt.T_MM = T_qMM[q]
if (debug and self.band_comm.size == 1 and self.gd.comm.rank == 0 and
nao > 0 and not self.ksl.using_blacs):
# S and T are summed only on comm master, so check only there
from numpy.linalg import eigvalsh
self.timer.start('Check positive definiteness')
for S_MM in S_qMM:
tri2full(S_MM, UL='L')
smin = eigvalsh(S_MM).real.min()
if smin < 0:
raise RuntimeError('Overlap matrix has negative '
'eigenvalue: %e' % smin)
self.timer.stop('Check positive definiteness')
self.positions_set = True
self.S_qMM = S_qMM
self.T_qMM = T_qMM
def initialize(self, density, hamiltonian, spos_ac):
if density.nt_sG is None:
if self.kpt_u[0].f_n is None or self.kpt_u[0].C_nM is None:
density.initialize_from_atomic_densities(self.basis_functions)
else:
# We have the info we need for a density matrix, so initialize
# from that instead of from scratch. This will be the case
# after set_positions() during a relaxation
density.initialize_from_wavefunctions(self)
else:
# After a restart, nt_sg doesn't exist yet, so we'll have to
# make sure it does. Of course, this should have been taken care
# of already by this time, so we should improve the code elsewhere
density.calculate_normalized_charges_and_mix()
hamiltonian.update(density)
def calculate_density_matrix(self, f_n, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix(f_n, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
# ----------------------------
if 1:
# XXX Should not conjugate, but call gemm(..., 'c')
# Although that requires knowing C_Mn and not C_nM.
# that also conforms better to the usual conventions in literature
Cf_Mn = C_nM.T.conj() * f_n
gemm(1.0, C_nM, Cf_Mn, 0.0, rho_MM, 'n')
self.bd.comm.sum(rho_MM)
else:
# Alternative suggestion. Might be faster. Someone should test this
C_Mn = C_nM.T.copy()
r2k(0.5, C_Mn, f_n * C_Mn, 0.0, rho_MM)
tri2full(rho_MM)
def calculate_density_matrix_delta(self, d_nn, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix_delta(d_nn, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
def add_to_density_from_k_point_with_occupation(self, nt_sG, kpt, f_n):
"""Add contribution to pseudo electron-density. Do not use the standard
occupation numbers, but ones given with argument f_n."""
# Custom occupations are used in calculation of response potential
# with GLLB-potential
Mstart = self.basis_functions.Mstart
Mstop = self.basis_functions.Mstop
if kpt.rho_MM is None:
rho_MM = self.calculate_density_matrix(f_n, kpt.C_nM)
if hasattr(kpt, 'c_on'):
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands), dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
d_nn += ne * np.outer(c_n.conj(), c_n)
rho_MM += self.calculate_density_matrix_delta(d_nn, kpt.C_nM)
else:
rho_MM = kpt.rho_MM
self.timer.start('Construct density')
self.basis_functions.construct_density(rho_MM,
nt_sG[kpt.s], kpt.q)
self.timer.stop('Construct density')
def add_to_density_from_k_point(self, nt_sG, kpt):
"""Add contribution to pseudo electron-density. """
self.add_to_density_from_k_point_with_occupation(nt_sG, kpt, kpt.f_n)
def add_to_kinetic_density_from_k_point(self, taut_G, kpt):
raise NotImplementedError('Kinetic density calculation for LCAO '
'wavefunctions is not implemented.')
def calculate_forces(self, hamiltonian, F_av):
self.timer.start('LCAO forces')
spos_ac = self.tci.atoms.get_scaled_positions() % 1.0
nao = self.ksl.nao
mynao = self.ksl.mynao
nq = len(self.kd.ibzk_qc)
dtype = self.dtype
dThetadR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dTdR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dPdR_aqvMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
dPdR_aqvMi[a] = np.empty((nq, 3, nao, ni), dtype)
self.timer.start('LCAO forces: tci derivative')
self.tci.calculate_derivative(spos_ac, dThetadR_qvMM, dTdR_qvMM,
dPdR_aqvMi)
#if not hasattr(self.tci, 'set_positions'): # XXX newtci
comm = self.gd.comm
comm.sum(dThetadR_qvMM)
comm.sum(dTdR_qvMM)
self.timer.stop('LCAO forces: tci derivative')
# TODO: Most contributions will be the same for each spin.
for kpt in self.kpt_u:
self.calculate_forces_by_kpoint(kpt, hamiltonian,
F_av, self.tci,
self.P_aqMi,
dThetadR_qvMM[kpt.q],
dTdR_qvMM[kpt.q],
dPdR_aqvMi)
self.ksl.orbital_comm.sum(F_av)
if self.bd.comm.rank == 0:
self.kpt_comm.sum(F_av, 0)
self.timer.stop('LCAO forces')
def print_arrays_with_ranks(self, names, arrays_nax):
# Debugging function for checking properties of distributed arrays
# Prints rank, label, list of atomic indices, and element sum
# for parts of array on this cpu as a primitive "hash" function
my_atom_indices = self.basis_functions.my_atom_indices
from gpaw.mpi import rank
for name, array_ax in zip(names, arrays_nax):
sums = [array_ax[a].sum() for a in my_atom_indices]
print rank, name, my_atom_indices, sums
def calculate_forces_by_kpoint(self, kpt, hamiltonian,
F_av, tci, P_aqMi,
dThetadR_vMM, dTdR_vMM, dPdR_aqvMi):
k = kpt.k
q = kpt.q
mynao = self.ksl.mynao
nao = self.ksl.nao
dtype = self.dtype
Mstart = self.ksl.Mstart
Mstop = self.ksl.Mstop
basis_functions = self.basis_functions
my_atom_indices = basis_functions.my_atom_indices
atom_indices = basis_functions.atom_indices
def _slices(indices):
for a in indices:
M1 = basis_functions.M_a[a] - Mstart
M2 = M1 + self.setups[a].niAO
yield a, M1, M2
def slices():
return _slices(atom_indices)
def my_slices():
return _slices(my_atom_indices)
#
# ----- -----
# \ -1 \ *
# E = ) S H rho = ) c eps f c
# mu nu / mu x x z z nu / n mu n n n nu
# ----- -----
# x z n
#
# We use the transpose of that matrix. The first form is used
# if rho is given, otherwise the coefficients are used.
self.timer.start('LCAO forces: initial')
if kpt.rho_MM is None:
rhoT_MM = self.ksl.get_transposed_density_matrix(kpt.f_n, kpt.C_nM)
ET_MM = self.ksl.get_transposed_density_matrix(kpt.f_n * kpt.eps_n,
kpt.C_nM)
if hasattr(kpt, 'c_on'):
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands), dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
d_nn += ne * np.outer(c_n.conj(), c_n)
rhoT_MM += self.ksl.get_transposed_density_matrix_delta(d_nn, kpt.C_nM)
ET_MM+=self.ksl.get_transposed_density_matrix_delta(d_nn*kpt.eps_n, kpt.C_nM)
else:
H_MM = self.eigensolver.calculate_hamiltonian_matrix(hamiltonian,
self,
kpt)
tri2full(H_MM)
S_MM = self.S_qMM[q].copy()
tri2full(S_MM)
ET_MM = np.linalg.solve(S_MM, gemmdot(H_MM, kpt.rho_MM)).T.copy()
del S_MM, H_MM
rhoT_MM = kpt.rho_MM.T.copy()
self.timer.stop('LCAO forces: initial')
# Kinetic energy contribution
#
# ----- d T
# a \ mu nu
# F += 2 Re ) -------- rho
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Fkin_av = np.zeros_like(F_av)
dEdTrhoT_vMM = (dTdR_vMM * rhoT_MM[np.newaxis]).real
for a, M1, M2 in my_slices():
Fkin_av[a, :] = 2 * dEdTrhoT_vMM[:, M1:M2].sum(-1).sum(-1)
del dEdTrhoT_vMM
# Potential contribution
#
# ----- / d Phi (r)
# a \ | mu ~
# F += -2 Re ) | ---------- v (r) Phi (r) dr rho
# / | d R nu nu mu
# ----- / a
# mu in a; nu
#
self.timer.start('LCAO forces: potential')
Fpot_av = np.zeros_like(F_av)
vt_G = hamiltonian.vt_sG[kpt.s]
DVt_vMM = np.zeros((3, mynao, nao), dtype)
# Note that DVt_vMM contains dPhi(r) / dr = - dPhi(r) / dR^a
basis_functions.calculate_potential_matrix_derivative(vt_G, DVt_vMM, q)
for a, M1, M2 in slices():
for v in range(3):
Fpot_av[a, v] = 2 * (DVt_vMM[v, M1:M2, :]
* rhoT_MM[M1:M2, :]).real.sum()
del DVt_vMM
self.timer.stop('LCAO forces: potential')
# Density matrix contribution due to basis overlap
#
# ----- d Theta
# a \ mu nu
# F += -2 Re ) ------------ E
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Frho_av = np.zeros_like(F_av)
dThetadRE_vMM = (dThetadR_vMM * ET_MM[np.newaxis]).real
for a, M1, M2 in my_slices():
Frho_av[a, :] = -2 * dThetadRE_vMM[:, M1:M2].sum(-1).sum(-1)
del dThetadRE_vMM
# Density matrix contribution from PAW correction
#
# ----- -----
# a \ a \ b
# F += 2 Re ) Z E - 2 Re ) Z E
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# with
# b*
# ----- dP
# b \ i mu b b
# Z = ) -------- dS P
# mu nu / dR ij j nu
# ----- b mu
# ij
#
self.timer.start('LCAO forces: paw correction')
dPdR_avMi = dict([(a, dPdR_aqvMi[a][q]) for a in my_atom_indices])
work_MM = np.zeros((mynao, nao), dtype)
ZE_MM = None
for b in my_atom_indices:
setup = self.setups[b]
dO_ii = np.asarray(setup.dO_ii, dtype)
dOP_iM = np.zeros((setup.ni, nao), dtype)
gemm(1.0, self.P_aqMi[b][q], dO_ii, 0.0, dOP_iM, 'c')
for v in range(3):
gemm(1.0, dOP_iM, dPdR_avMi[b][v][Mstart:Mstop], 0.0,
work_MM, 'n')
ZE_MM = (work_MM * ET_MM).real
for a, M1, M2 in slices():
dE = 2 * ZE_MM[M1:M2].sum()
Frho_av[a, v] -= dE # the "b; mu in a; nu" term
Frho_av[b, v] += dE # the "mu nu" term
del work_MM, ZE_MM
self.timer.stop('LCAO forces: paw correction')
# Atomic density contribution
# ----- -----
# a \ a \ b
# F += -2 Re ) A rho + 2 Re ) A rho
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# b*
# ----- d P
# b \ i mu b b
# A = ) ------- dH P
# mu nu / d R ij j nu
# ----- b mu
# ij
#
self.timer.start('LCAO forces: atomic density')
Fatom_av = np.zeros_like(F_av)
for b in my_atom_indices:
H_ii = np.asarray(unpack(hamiltonian.dH_asp[b][kpt.s]), dtype)
HP_iM = gemmdot(H_ii, np.conj(self.P_aqMi[b][q].T))
for v in range(3):
dPdR_Mi = dPdR_avMi[b][v][Mstart:Mstop]
ArhoT_MM = (gemmdot(dPdR_Mi, HP_iM) * rhoT_MM).real
for a, M1, M2 in slices():
dE = 2 * ArhoT_MM[M1:M2].sum()
Fatom_av[a, v] += dE # the "b; mu in a; nu" term
Fatom_av[b, v] -= dE # the "mu nu" term
self.timer.stop('LCAO forces: atomic density')
F_av += Fkin_av + Fpot_av + Frho_av + Fatom_av
def _get_wave_function_array(self, u, n):
kpt = self.kpt_u[u]
C_nM = kpt.C_nM
if C_nM is None:
# Hack to make sure things are available after restart
self.lazyloader.load(self)
psit_G = self.gd.zeros(dtype=self.dtype)
psit_1G = psit_G.reshape(1, -1)
C_1M = kpt.C_nM[n].reshape(1, -1)
q = kpt.q # Should we enforce q=-1 for gamma-point?
if self.kd.gamma:
q = -1
self.basis_functions.lcao_to_grid(C_1M, psit_1G, q)
return psit_G
def load_lazily(self, hamiltonian, spos_ac):
"""Horrible hack to recalculate lcao coefficients after restart."""
class LazyLoader:
def __init__(self, hamiltonian, spos_ac):
self.hamiltonian = hamiltonian
self.spos_ac = spos_ac
def load(self, wfs):
wfs.set_positions(self.spos_ac)
wfs.eigensolver.iterate(hamiltonian, wfs)
del wfs.lazyloader
self.lazyloader = LazyLoader(hamiltonian, spos_ac)
def write_wave_functions(self, writer):
if self.world.rank == 0:
writer.dimension('nbasis', self.setups.nao)
writer.add('WaveFunctionCoefficients',
('nspins', 'nibzkpts', 'nbands', 'nbasis'),
dtype=self.dtype)
for s in range(self.nspins):
for k in range(self.nibzkpts):
C_nM = self.collect_array('C_nM', k, s)
if self.world.rank == 0:
writer.fill(C_nM, s, k)
def read_coefficients(self, reader):
for kpt in self.kpt_u:
kpt.C_nM = self.bd.empty(self.setups.nao, dtype=self.dtype)
for n in self.bd.get_band_indices():
kpt.C_nM[n] = reader.get('WaveFunctionCoefficients',
kpt.s, kpt.k, n)
def estimate_memory(self, mem):
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
ni_total = sum([setup.ni for setup in self.setups])
itemsize = mem.itemsize[self.dtype]
mem.subnode('C [qnM]', nq * self.mynbands * nao * itemsize)
nM1, nM2 = self.ksl.get_overlap_matrix_shape()
mem.subnode('S, T [2 x qmm]', 2 * nq * nM1 * nM2 * itemsize)
mem.subnode('P [aqMi]', nq * nao * ni_total // self.gd.comm.size)
self.tci.estimate_memory(mem.subnode('TCI'))
self.basis_functions.estimate_memory(mem.subnode('BasisFunctions'))
self.eigensolver.estimate_memory(mem.subnode('Eigensolver'),
self.dtype)
class LCAOWaveFunctions(WaveFunctions):
mode = 'lcao'
def __init__(self,
ksl,
gd,
nvalence,
setups,
bd,
dtype,
world,
kd,
kptband_comm,
timer,
atomic_hamiltonian=None):
WaveFunctions.__init__(self, gd, nvalence, setups, bd, dtype, world,
kd, kptband_comm, timer)
self.ksl = ksl
self.S_qMM = None
self.T_qMM = None
self.P_aqMi = None
if atomic_hamiltonian is None:
if ksl.using_blacs:
atomic_hamiltonian = 'distributed'
else:
atomic_hamiltonian = 'dense'
if isinstance(atomic_hamiltonian, str):
atomic_hamiltonian = get_atomic_hamiltonian(atomic_hamiltonian)
self.atomic_hamiltonian = atomic_hamiltonian
self.timer.start('TCI: Evaluate splines')
self.tci = NewTCI(gd.cell_cv, gd.pbc_c, setups, kd.ibzk_qc, kd.gamma)
self.timer.stop('TCI: Evaluate splines')
self.basis_functions = BasisFunctions(
gd, [setup.phit_j for setup in setups], kd, dtype=dtype, cut=True)
def empty(self, n=(), global_array=False, realspace=False):
if realspace:
return self.gd.empty(n, self.dtype, global_array)
else:
if isinstance(n, int):
n = (n, )
nao = self.setups.nao
return np.empty(n + (nao, ), self.dtype)
def summary(self, fd):
fd.write('Wave functions: LCAO\n')
fd.write(' Diagonalizer: %s\n' % self.ksl.get_description())
fd.write(' Atomic Hamiltonian: %s\n' %
self.atomic_hamiltonian.description)
def set_eigensolver(self, eigensolver):
WaveFunctions.set_eigensolver(self, eigensolver)
eigensolver.initialize(self.gd, self.dtype, self.setups.nao, self.ksl)
def set_positions(self, spos_ac):
self.timer.start('Basic WFS set positions')
WaveFunctions.set_positions(self, spos_ac)
self.timer.stop('Basic WFS set positions')
self.timer.start('Basis functions set positions')
self.basis_functions.set_positions(spos_ac)
self.timer.stop('Basis functions set positions')
if self.ksl is not None:
self.basis_functions.set_matrix_distribution(
self.ksl.Mstart, self.ksl.Mstop)
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
mynbands = self.bd.mynbands
Mstop = self.ksl.Mstop
Mstart = self.ksl.Mstart
mynao = Mstop - Mstart
if self.ksl.using_blacs: # XXX
# S and T have been distributed to a layout with blacs, so
# discard them to force reallocation from scratch.
#
# TODO: evaluate S and T when they *are* distributed, thus saving
# memory and avoiding this problem
self.S_qMM = None
self.T_qMM = None
S_qMM = self.S_qMM
T_qMM = self.T_qMM
if S_qMM is None: # XXX
# First time:
assert T_qMM is None
if self.ksl.using_blacs: # XXX
self.tci.set_matrix_distribution(Mstart, mynao)
S_qMM = np.empty((nq, mynao, nao), self.dtype)
T_qMM = np.empty((nq, mynao, nao), self.dtype)
for kpt in self.kpt_u:
if kpt.C_nM is None:
kpt.C_nM = np.empty((mynbands, nao), self.dtype)
self.allocate_arrays_for_projections(
self.basis_functions.my_atom_indices)
self.P_aqMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
self.P_aqMi[a] = np.empty((nq, nao, ni), self.dtype)
self.timer.start('TCI: Calculate S, T, P')
# Calculate lower triangle of S and T matrices:
self.tci.calculate(spos_ac, S_qMM, T_qMM, self.P_aqMi)
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
from gpaw.lcao.newoverlap import newoverlap
self.P_neighbors_a, self.P_aaqim, self.newP_aqMi \
= newoverlap(self, spos_ac)
# XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
for kpt in self.kpt_u:
q = kpt.q
kpt.P_aMi = dict([(a, P_qMi[q])
for a, P_qMi in self.P_aqMi.items()])
kpt.P_aaim = dict([(a1a2, P_qim[q])
for a1a2, P_qim in self.P_aaqim.items()])
add_paw_correction_to_overlap(self.setups, self.P_aqMi, S_qMM,
self.ksl.Mstart, self.ksl.Mstop)
self.timer.stop('TCI: Calculate S, T, P')
S_MM = None # allow garbage collection of old S_qMM after redist
S_qMM = self.ksl.distribute_overlap_matrix(S_qMM, root=-1)
T_qMM = self.ksl.distribute_overlap_matrix(T_qMM, root=-1)
for kpt in self.kpt_u:
q = kpt.q
kpt.S_MM = S_qMM[q]
kpt.T_MM = T_qMM[q]
if (debug and self.band_comm.size == 1 and self.gd.comm.rank == 0
and nao > 0 and not self.ksl.using_blacs):
# S and T are summed only on comm master, so check only there
from numpy.linalg import eigvalsh
self.timer.start('Check positive definiteness')
for S_MM in S_qMM:
tri2full(S_MM, UL='L')
smin = eigvalsh(S_MM).real.min()
if smin < 0:
raise RuntimeError('Overlap matrix has negative '
'eigenvalue: %e' % smin)
self.timer.stop('Check positive definiteness')
self.positions_set = True
self.S_qMM = S_qMM
self.T_qMM = T_qMM
def initialize(self, density, hamiltonian, spos_ac):
self.timer.start('LCAO WFS Initialize')
if density.nt_sG is None:
if self.kpt_u[0].f_n is None or self.kpt_u[0].C_nM is None:
density.initialize_from_atomic_densities(self.basis_functions)
else:
# We have the info we need for a density matrix, so initialize
# from that instead of from scratch. This will be the case
# after set_positions() during a relaxation
density.initialize_from_wavefunctions(self)
# Initialize GLLB-potential from basis function orbitals
if hamiltonian.xc.type == 'GLLB':
hamiltonian.xc.initialize_from_atomic_orbitals(\
self.basis_functions)
else:
# After a restart, nt_sg doesn't exist yet, so we'll have to
# make sure it does. Of course, this should have been taken care
# of already by this time, so we should improve the code elsewhere
density.calculate_normalized_charges_and_mix()
#print "Updating hamiltonian in LCAO initialize wfs"
hamiltonian.update(density)
self.timer.stop('LCAO WFS Initialize')
def initialize_wave_functions_from_lcao(self):
"""
Fill the calc.wfs.kpt_[u].psit_nG arrays with usefull data.
Normally psit_nG is NOT used in lcao mode, but some extensions
(like ase.dft.wannier) want to have it.
This code is adapted from fd.py / initialize_from_lcao_coefficients()
and fills psit_nG with data constructed from the current lcao
coefficients (kpt.C_nM).
(This may or may not work in band-parallel case!)
"""
#print('initialize_wave_functions_from_lcao')
bfs = self.basis_functions
for kpt in self.kpt_u:
#print("kpt: {0}".format(kpt))
kpt.psit_nG = self.gd.zeros(self.bd.nbands, self.dtype)
bfs.lcao_to_grid(kpt.C_nM, kpt.psit_nG[:self.bd.mynbands], kpt.q)
# kpt.C_nM = None
def initialize_wave_functions_from_restart_file(self):
"""Dummy function to ensure compatibility to fd mode"""
self.initialize_wave_functions_from_lcao()
def calculate_density_matrix(self, f_n, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix(f_n, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
# ----------------------------
if 1:
# XXX Should not conjugate, but call gemm(..., 'c')
# Although that requires knowing C_Mn and not C_nM.
# that also conforms better to the usual conventions in literature
Cf_Mn = C_nM.T.conj() * f_n
self.timer.start('gemm')
gemm(1.0, C_nM, Cf_Mn, 0.0, rho_MM, 'n')
self.timer.stop('gemm')
self.timer.start('band comm sum')
self.bd.comm.sum(rho_MM)
self.timer.stop('band comm sum')
else:
# Alternative suggestion. Might be faster. Someone should test this
from gpaw.utilities.blas import r2k
C_Mn = C_nM.T.copy()
r2k(0.5, C_Mn, f_n * C_Mn, 0.0, rho_MM)
tri2full(rho_MM)
def calculate_density_matrix_delta(self, d_nn, C_nM, rho_MM=None):
# ATLAS can't handle uninitialized output array:
#rho_MM.fill(42)
self.timer.start('Calculate density matrix')
rho_MM = self.ksl.calculate_density_matrix_delta(d_nn, C_nM, rho_MM)
self.timer.stop('Calculate density matrix')
return rho_MM
def add_to_density_from_k_point_with_occupation(self, nt_sG, kpt, f_n):
"""Add contribution to pseudo electron-density. Do not use the standard
occupation numbers, but ones given with argument f_n."""
# Custom occupations are used in calculation of response potential
# with GLLB-potential
if kpt.rho_MM is None:
rho_MM = self.calculate_density_matrix(f_n, kpt.C_nM)
if hasattr(kpt, 'c_on'):
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands),
dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
assert abs(c_n.imag).max() < 1e-14
d_nn += ne * np.outer(c_n.conj(), c_n).real
rho_MM += self.calculate_density_matrix_delta(d_nn, kpt.C_nM)
else:
rho_MM = kpt.rho_MM
self.timer.start('Construct density')
self.basis_functions.construct_density(rho_MM, nt_sG[kpt.s], kpt.q)
self.timer.stop('Construct density')
def add_to_kinetic_density_from_k_point(self, taut_G, kpt):
raise NotImplementedError('Kinetic density calculation for LCAO '
'wavefunctions is not implemented.')
def calculate_forces(self, hamiltonian, F_av):
self.timer.start('LCAO forces')
spos_ac = self.tci.atoms.get_scaled_positions() % 1.0
ksl = self.ksl
nao = ksl.nao
mynao = ksl.mynao
nq = len(self.kd.ibzk_qc)
dtype = self.dtype
tci = self.tci
gd = self.gd
bfs = self.basis_functions
Mstart = ksl.Mstart
Mstop = ksl.Mstop
from gpaw.kohnsham_layouts import BlacsOrbitalLayouts
isblacs = isinstance(ksl, BlacsOrbitalLayouts) # XXX
if not isblacs:
self.timer.start('TCI derivative')
dThetadR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dTdR_qvMM = np.empty((nq, 3, mynao, nao), dtype)
dPdR_aqvMi = {}
for a in self.basis_functions.my_atom_indices:
ni = self.setups[a].ni
dPdR_aqvMi[a] = np.empty((nq, 3, nao, ni), dtype)
tci.calculate_derivative(spos_ac, dThetadR_qvMM, dTdR_qvMM,
dPdR_aqvMi)
gd.comm.sum(dThetadR_qvMM)
gd.comm.sum(dTdR_qvMM)
self.timer.stop('TCI derivative')
my_atom_indices = bfs.my_atom_indices
atom_indices = bfs.atom_indices
def _slices(indices):
for a in indices:
M1 = bfs.M_a[a] - Mstart
M2 = M1 + self.setups[a].nao
if M2 > 0:
yield a, max(0, M1), M2
def slices():
return _slices(atom_indices)
def my_slices():
return _slices(my_atom_indices)
#
# ----- -----
# \ -1 \ *
# E = ) S H rho = ) c eps f c
# mu nu / mu x x z z nu / n mu n n n nu
# ----- -----
# x z n
#
# We use the transpose of that matrix. The first form is used
# if rho is given, otherwise the coefficients are used.
self.timer.start('Initial')
rhoT_uMM = []
ET_uMM = []
if not isblacs:
if self.kpt_u[0].rho_MM is None:
self.timer.start('Get density matrix')
for kpt in self.kpt_u:
rhoT_MM = ksl.get_transposed_density_matrix(
kpt.f_n, kpt.C_nM)
rhoT_uMM.append(rhoT_MM)
ET_MM = ksl.get_transposed_density_matrix(
kpt.f_n * kpt.eps_n, kpt.C_nM)
ET_uMM.append(ET_MM)
if hasattr(kpt, 'c_on'):
# XXX does this work with BLACS/non-BLACS/etc.?
assert self.bd.comm.size == 1
d_nn = np.zeros((self.bd.mynbands, self.bd.mynbands),
dtype=kpt.C_nM.dtype)
for ne, c_n in zip(kpt.ne_o, kpt.c_on):
d_nn += ne * np.outer(c_n.conj(), c_n)
rhoT_MM += ksl.get_transposed_density_matrix_delta(\
d_nn, kpt.C_nM)
ET_MM += ksl.get_transposed_density_matrix_delta(\
d_nn * kpt.eps_n, kpt.C_nM)
self.timer.stop('Get density matrix')
else:
rhoT_uMM = []
ET_uMM = []
for kpt in self.kpt_u:
H_MM = self.eigensolver.calculate_hamiltonian_matrix(\
hamiltonian, self, kpt)
tri2full(H_MM)
S_MM = kpt.S_MM.copy()
tri2full(S_MM)
ET_MM = np.linalg.solve(S_MM,
gemmdot(H_MM,
kpt.rho_MM)).T.copy()
del S_MM, H_MM
rhoT_MM = kpt.rho_MM.T.copy()
rhoT_uMM.append(rhoT_MM)
ET_uMM.append(ET_MM)
self.timer.stop('Initial')
if isblacs: # XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
from gpaw.blacs import BlacsGrid, Redistributor
def get_density_matrix(f_n, C_nM, redistributor):
rho1_mm = ksl.calculate_blocked_density_matrix(f_n,
C_nM).conj()
rho_mm = redistributor.redistribute(rho1_mm)
return rho_mm
pcutoff_a = [
max([pt.get_cutoff() for pt in setup.pt_j])
for setup in self.setups
]
phicutoff_a = [
max([phit.get_cutoff() for phit in setup.phit_j])
for setup in self.setups
]
# XXX should probably use bdsize x gdsize instead
# That would be consistent with some existing grids
grid = BlacsGrid(ksl.block_comm, self.gd.comm.size,
self.bd.comm.size)
blocksize1 = -(-nao // grid.nprow)
blocksize2 = -(-nao // grid.npcol)
# XXX what are rows and columns actually?
desc = grid.new_descriptor(nao, nao, blocksize1, blocksize2)
rhoT_umm = []
ET_umm = []
redistributor = Redistributor(grid.comm, ksl.mmdescriptor, desc)
Fpot_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
self.timer.start('Get density matrix')
rhoT_mm = get_density_matrix(kpt.f_n, kpt.C_nM, redistributor)
rhoT_umm.append(rhoT_mm)
self.timer.stop('Get density matrix')
self.timer.start('Potential')
rhoT_mM = ksl.distribute_to_columns(rhoT_mm, desc)
vt_G = hamiltonian.vt_sG[kpt.s]
Fpot_av += bfs.calculate_force_contribution(
vt_G, rhoT_mM, kpt.q)
del rhoT_mM
self.timer.stop('Potential')
self.timer.start('Get density matrix')
for kpt in self.kpt_u:
ET_mm = get_density_matrix(kpt.f_n * kpt.eps_n, kpt.C_nM,
redistributor)
ET_umm.append(ET_mm)
self.timer.stop('Get density matrix')
M1start = blocksize1 * grid.myrow
M2start = blocksize2 * grid.mycol
M1stop = min(M1start + blocksize1, nao)
M2stop = min(M2start + blocksize2, nao)
m1max = M1stop - M1start
m2max = M2stop - M2start
if not isblacs:
# Kinetic energy contribution
#
# ----- d T
# a \ mu nu
# F += 2 Re ) -------- rho
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Fkin_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
dEdTrhoT_vMM = (dTdR_qvMM[kpt.q] *
rhoT_uMM[u][np.newaxis]).real
for a, M1, M2 in my_slices():
Fkin_av[a, :] += \
2.0 * dEdTrhoT_vMM[:, M1:M2].sum(-1).sum(-1)
del dEdTrhoT_vMM
# Density matrix contribution due to basis overlap
#
# ----- d Theta
# a \ mu nu
# F += -2 Re ) ------------ E
# / d R nu mu
# ----- mu nu
# mu in a; nu
#
Ftheta_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
dThetadRE_vMM = (dThetadR_qvMM[kpt.q] *
ET_uMM[u][np.newaxis]).real
for a, M1, M2 in my_slices():
Ftheta_av[a, :] += \
-2.0 * dThetadRE_vMM[:, M1:M2].sum(-1).sum(-1)
del dThetadRE_vMM
if isblacs:
from gpaw.lcao.overlap import TwoCenterIntegralCalculator
self.timer.start('Prepare TCI loop')
M_a = bfs.M_a
Fkin2_av = np.zeros_like(F_av)
Ftheta2_av = np.zeros_like(F_av)
cell_cv = tci.atoms.cell
spos_ac = tci.atoms.get_scaled_positions() % 1.0
overlapcalc = TwoCenterIntegralCalculator(self.kd.ibzk_qc,
derivative=False)
# XXX this is not parallel *AT ALL*.
self.timer.start('Get neighbors')
nl = tci.atompairs.pairs.neighbors
r_and_offset_aao = get_r_and_offsets(nl, spos_ac, cell_cv)
atompairs = r_and_offset_aao.keys()
atompairs.sort()
self.timer.stop('Get neighbors')
T_expansions = tci.T_expansions
Theta_expansions = tci.Theta_expansions
P_expansions = tci.P_expansions
nq = len(self.kd.ibzk_qc)
dH_asp = hamiltonian.dH_asp
self.timer.start('broadcast dH')
alldH_asp = {}
for a in range(len(self.setups)):
gdrank = bfs.sphere_a[a].rank
if gdrank == gd.rank:
dH_sp = dH_asp[a]
else:
ni = self.setups[a].ni
dH_sp = np.empty((self.nspins, ni * (ni + 1) // 2))
gd.comm.broadcast(dH_sp, gdrank)
# okay, now everyone gets copies of dH_sp
alldH_asp[a] = dH_sp
self.timer.stop('broadcast dH')
# This will get sort of hairy. We need to account for some
# three-center overlaps, such as:
#
# a1
# Phi ~a3 a3 ~a3 a2 a2,a1
# < ---- |p > dH <p |Phi > rho
# dR
#
# To this end we will loop over all pairs of atoms (a1, a3),
# and then a sub-loop over (a3, a2).
from gpaw.lcao.overlap import DerivativeAtomicDisplacement
class Displacement(DerivativeAtomicDisplacement):
def __init__(self, a1, a2, R_c, offset):
phases = overlapcalc.phaseclass(overlapcalc.ibzk_qc,
offset)
DerivativeAtomicDisplacement.__init__(
self, None, a1, a2, R_c, offset, phases)
# Cache of Displacement objects with spherical harmonics with
# evaluated spherical harmonics.
disp_aao = {}
def get_displacements(a1, a2, maxdistance):
# XXX the way maxdistance is handled it can lead to
# bad caching when different maxdistances are passed
# to subsequent calls with same pair of atoms
disp_o = disp_aao.get((a1, a2))
if disp_o is None:
disp_o = []
for R_c, offset in r_and_offset_aao[(a1, a2)]:
if np.linalg.norm(R_c) > maxdistance:
continue
disp = Displacement(a1, a2, R_c, offset)
disp_o.append(disp)
disp_aao[(a1, a2)] = disp_o
return [disp for disp in disp_o if disp.r < maxdistance]
self.timer.stop('Prepare TCI loop')
self.timer.start('Not so complicated loop')
for (a1, a2) in atompairs:
if a1 >= a2:
# Actually this leads to bad load balance.
# We should take a1 > a2 or a1 < a2 equally many times.
# Maybe decide which of these choices
# depending on whether a2 % 1 == 0
continue
m1start = M_a[a1] - M1start
m2start = M_a[a2] - M2start
if m1start >= blocksize1 or m2start >= blocksize2:
continue # (we have only one block per CPU)
T_expansion = T_expansions.get(a1, a2)
Theta_expansion = Theta_expansions.get(a1, a2)
#P_expansion = P_expansions.get(a1, a2)
nm1, nm2 = T_expansion.shape
m1stop = min(m1start + nm1, m1max)
m2stop = min(m2start + nm2, m2max)
if m1stop <= 0 or m2stop <= 0:
continue
m1start = max(m1start, 0)
m2start = max(m2start, 0)
J1start = max(0, M1start - M_a[a1])
J2start = max(0, M2start - M_a[a2])
M1stop = J1start + m1stop - m1start
J2stop = J2start + m2stop - m2start
dTdR_qvmm = T_expansion.zeros((nq, 3), dtype=dtype)
dThetadR_qvmm = Theta_expansion.zeros((nq, 3), dtype=dtype)
disp_o = get_displacements(a1, a2,
phicutoff_a[a1] + phicutoff_a[a2])
for disp in disp_o:
disp.evaluate_overlap(T_expansion, dTdR_qvmm)
disp.evaluate_overlap(Theta_expansion, dThetadR_qvmm)
for u, kpt in enumerate(self.kpt_u):
rhoT_mm = rhoT_umm[u][m1start:m1stop, m2start:m2stop]
ET_mm = ET_umm[u][m1start:m1stop, m2start:m2stop]
Fkin_v = 2.0 * (
dTdR_qvmm[kpt.q][:, J1start:M1stop, J2start:J2stop] *
rhoT_mm[np.newaxis]).real.sum(-1).sum(-1)
Ftheta_v = 2.0 * (dThetadR_qvmm[kpt.q][:, J1start:M1stop,
J2start:J2stop] *
ET_mm[np.newaxis]).real.sum(-1).sum(-1)
Fkin2_av[a1] += Fkin_v
Fkin2_av[a2] -= Fkin_v
Ftheta2_av[a1] -= Ftheta_v
Ftheta2_av[a2] += Ftheta_v
Fkin_av = Fkin2_av
Ftheta_av = Ftheta2_av
self.timer.stop('Not so complicated loop')
dHP_and_dSP_aauim = {}
a2values = {}
for (a2, a3) in atompairs:
if not a3 in a2values:
a2values[a3] = []
a2values[a3].append(a2)
Fatom_av = np.zeros_like(F_av)
Frho_av = np.zeros_like(F_av)
self.timer.start('Complicated loop')
for a1, a3 in atompairs:
if a1 == a3:
# Functions reside on same atom, so their overlap
# does not change when atom is displaced
continue
m1start = M_a[a1] - M1start
if m1start >= blocksize1:
continue
P_expansion = P_expansions.get(a1, a3)
nm1 = P_expansion.shape[0]
m1stop = min(m1start + nm1, m1max)
if m1stop <= 0:
continue
m1start = max(m1start, 0)
J1start = max(0, M1start - M_a[a1])
J1stop = J1start + m1stop - m1start
disp_o = get_displacements(a1, a3,
phicutoff_a[a1] + pcutoff_a[a3])
if len(disp_o) == 0:
continue
dPdR_qvmi = P_expansion.zeros((nq, 3), dtype=dtype)
for disp in disp_o:
disp.evaluate_overlap(P_expansion, dPdR_qvmi)
dPdR_qvmi = dPdR_qvmi[:, :, J1start:J1stop, :].copy()
for a2 in a2values[a3]:
m2start = M_a[a2] - M2start
if m2start >= blocksize2:
continue
P_expansion2 = P_expansions.get(a2, a3)
nm2 = P_expansion2.shape[0]
m2stop = min(m2start + nm2, m2max)
if m2stop <= 0:
continue
disp_o = get_displacements(a2, a3,
phicutoff_a[a2] + pcutoff_a[a3])
if len(disp_o) == 0:
continue
m2start = max(m2start, 0)
J2start = max(0, M2start - M_a[a2])
J2stop = J2start + m2stop - m2start
if (a2, a3) in dHP_and_dSP_aauim:
dHP_uim, dSP_uim = dHP_and_dSP_aauim[(a2, a3)]
else:
P_qmi = P_expansion2.zeros((nq, ), dtype=dtype)
for disp in disp_o:
disp.evaluate_direct(P_expansion2, P_qmi)
P_qmi = P_qmi[:, J2start:J2stop].copy()
dH_sp = alldH_asp[a3]
dS_ii = self.setups[a3].dO_ii
dHP_uim = []
dSP_uim = []
for u, kpt in enumerate(self.kpt_u):
dH_ii = unpack(dH_sp[kpt.s])
dHP_im = np.dot(P_qmi[kpt.q], dH_ii).T.conj()
# XXX only need nq of these
dSP_im = np.dot(P_qmi[kpt.q], dS_ii).T.conj()
dHP_uim.append(dHP_im)
dSP_uim.append(dSP_im)
dHP_and_dSP_aauim[(a2, a3)] = dHP_uim, dSP_uim
for u, kpt in enumerate(self.kpt_u):
rhoT_mm = rhoT_umm[u][m1start:m1stop, m2start:m2stop]
ET_mm = ET_umm[u][m1start:m1stop, m2start:m2stop]
dPdRdHP_vmm = np.dot(dPdR_qvmi[kpt.q], dHP_uim[u])
dPdRdSP_vmm = np.dot(dPdR_qvmi[kpt.q], dSP_uim[u])
Fatom_c = 2.0 * (dPdRdHP_vmm *
rhoT_mm).real.sum(-1).sum(-1)
Frho_c = 2.0 * (dPdRdSP_vmm *
ET_mm).real.sum(-1).sum(-1)
Fatom_av[a1] += Fatom_c
Fatom_av[a3] -= Fatom_c
Frho_av[a1] -= Frho_c
Frho_av[a3] += Frho_c
self.timer.stop('Complicated loop')
if not isblacs:
# Potential contribution
#
# ----- / d Phi (r)
# a \ | mu ~
# F += -2 Re ) | ---------- v (r) Phi (r) dr rho
# / | d R nu nu mu
# ----- / a
# mu in a; nu
#
self.timer.start('Potential')
Fpot_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
vt_G = hamiltonian.vt_sG[kpt.s]
Fpot_av += bfs.calculate_force_contribution(
vt_G, rhoT_uMM[u], kpt.q)
self.timer.stop('Potential')
# Density matrix contribution from PAW correction
#
# ----- -----
# a \ a \ b
# F += 2 Re ) Z E - 2 Re ) Z E
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# with
# b*
# ----- dP
# b \ i mu b b
# Z = ) -------- dS P
# mu nu / dR ij j nu
# ----- b mu
# ij
#
self.timer.start('Paw correction')
Frho_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
work_MM = np.zeros((mynao, nao), dtype)
ZE_MM = None
for b in my_atom_indices:
setup = self.setups[b]
dO_ii = np.asarray(setup.dO_ii, dtype)
dOP_iM = np.zeros((setup.ni, nao), dtype)
gemm(1.0, self.P_aqMi[b][kpt.q], dO_ii, 0.0, dOP_iM, 'c')
for v in range(3):
gemm(1.0, dOP_iM,
dPdR_aqvMi[b][kpt.q][v][Mstart:Mstop], 0.0,
work_MM, 'n')
ZE_MM = (work_MM * ET_uMM[u]).real
for a, M1, M2 in slices():
dE = 2 * ZE_MM[M1:M2].sum()
Frho_av[a, v] -= dE # the "b; mu in a; nu" term
Frho_av[b, v] += dE # the "mu nu" term
del work_MM, ZE_MM
self.timer.stop('Paw correction')
# Atomic density contribution
# ----- -----
# a \ a \ b
# F += -2 Re ) A rho + 2 Re ) A rho
# / mu nu nu mu / mu nu nu mu
# ----- -----
# mu nu b; mu in a; nu
#
# b*
# ----- d P
# b \ i mu b b
# A = ) ------- dH P
# mu nu / d R ij j nu
# ----- b mu
# ij
#
self.timer.start('Atomic Hamiltonian force')
Fatom_av = np.zeros_like(F_av)
for u, kpt in enumerate(self.kpt_u):
for b in my_atom_indices:
H_ii = np.asarray(unpack(hamiltonian.dH_asp[b][kpt.s]),
dtype)
HP_iM = gemmdot(
H_ii,
np.ascontiguousarray(self.P_aqMi[b][kpt.q].T.conj()))
for v in range(3):
dPdR_Mi = dPdR_aqvMi[b][kpt.q][v][Mstart:Mstop]
ArhoT_MM = (gemmdot(dPdR_Mi, HP_iM) * rhoT_uMM[u]).real
for a, M1, M2 in slices():
dE = 2 * ArhoT_MM[M1:M2].sum()
Fatom_av[a, v] += dE # the "b; mu in a; nu" term
Fatom_av[b, v] -= dE # the "mu nu" term
self.timer.stop('Atomic Hamiltonian force')
F_av += Fkin_av + Fpot_av + Ftheta_av + Frho_av + Fatom_av
self.timer.start('Wait for sum')
ksl.orbital_comm.sum(F_av)
if self.bd.comm.rank == 0:
self.kd.comm.sum(F_av, 0)
self.timer.stop('Wait for sum')
self.timer.stop('LCAO forces')
def _get_wave_function_array(self, u, n, realspace=True):
kpt = self.kpt_u[u]
if kpt.C_nM is None:
# Hack to make sure things are available after restart
self.lazyloader.load(self)
C_M = kpt.C_nM[n]
if realspace:
psit_G = self.gd.zeros(dtype=self.dtype)
self.basis_functions.lcao_to_grid(C_M, psit_G, kpt.q)
return psit_G
else:
return C_M
def load_lazily(self, hamiltonian, spos_ac):
"""Horrible hack to recalculate lcao coefficients after restart."""
self.basis_functions.set_positions(spos_ac)
class LazyLoader:
def __init__(self, hamiltonian, spos_ac):
self.spos_ac = spos_ac
def load(self, wfs):
wfs.set_positions(self.spos_ac) # this sets rank_a
# Now we need to pass wfs.rank_a or things to work
# XXX WTF why does one have to fiddle with rank_a???
hamiltonian.set_positions(self.spos_ac, wfs.rank_a)
wfs.eigensolver.iterate(hamiltonian, wfs)
del wfs.lazyloader
self.lazyloader = LazyLoader(hamiltonian, spos_ac)
def write(self, writer, write_wave_functions=False):
writer['Mode'] = 'lcao'
if not write_wave_functions:
return
writer.dimension('nbasis', self.setups.nao)
writer.add('WaveFunctionCoefficients',
('nspins', 'nibzkpts', 'nbands', 'nbasis'),
dtype=self.dtype)
for s in range(self.nspins):
for k in range(self.kd.nibzkpts):
C_nM = self.collect_array('C_nM', k, s)
writer.fill(C_nM, s, k)
def read_coefficients(self, reader):
for kpt in self.kpt_u:
kpt.C_nM = self.bd.empty(self.setups.nao, dtype=self.dtype)
for myn, C_M in enumerate(kpt.C_nM):
n = self.bd.global_index(myn)
C_M[:] = reader.get('WaveFunctionCoefficients', kpt.s, kpt.k,
n)
def estimate_memory(self, mem):
nq = len(self.kd.ibzk_qc)
nao = self.setups.nao
ni_total = sum([setup.ni for setup in self.setups])
itemsize = mem.itemsize[self.dtype]
mem.subnode('C [qnM]', nq * self.bd.mynbands * nao * itemsize)
nM1, nM2 = self.ksl.get_overlap_matrix_shape()
mem.subnode('S, T [2 x qmm]', 2 * nq * nM1 * nM2 * itemsize)
mem.subnode('P [aqMi]', nq * nao * ni_total // self.gd.comm.size)
self.tci.estimate_memory(mem.subnode('TCI'))
self.basis_functions.estimate_memory(mem.subnode('BasisFunctions'))
self.eigensolver.estimate_memory(mem.subnode('Eigensolver'),
self.dtype)