class GroveUltrasonicRanger(object):
def __init__(self, pin):
self.dio = GPIO(pin)
def _get_distance(self):
self.dio.dir(GPIO.OUT)
self.dio.write(0)
usleep(2)
self.dio.write(1)
usleep(10)
self.dio.write(0)
self.dio.dir(GPIO.IN)
t0 = time.time()
count = 0
while count < _TIMEOUT1:
if self.dio.read():
break
count += 1
if count >= _TIMEOUT1:
return None
t1 = time.time()
count = 0
while count < _TIMEOUT2:
if not self.dio.read():
break
count += 1
if count >= _TIMEOUT2:
return None
t2 = time.time()
dt = int((t1 - t0) * 1000000)
if dt > 530:
return None
distance = ((t2 - t1) * 1000000 / 29 / 2) # cm
return distance
def get_distance(self):
while True:
dist = self._get_distance()
if dist:
return dist
def on(self):
self.write(1)
def off(self):
self.write(0)
class Ultrasonic(object):
def __init__(self, pin):
#Digital Port
self.dio = GPIO(pin)
self._TIMEOUT1 = 1000
self._TIMEOUT2 = 10000
def usleep(self, x):
sleep(x / 1000000.0)
def _get_distance(self):
self.dio.dir(GPIO.OUT)
self.dio.write(0)
self.usleep(2)
self.dio.write(1)
self.usleep(10)
self.dio.write(0)
self.dio.dir(GPIO.IN)
t0 = time()
count = 0
while count < self._TIMEOUT1:
if self.dio.read():
break
count += 1
if count >= self._TIMEOUT1:
return None
t1 = time()
count = 0
while count < self._TIMEOUT2:
if not self.dio.read():
break
count += 1
if count >= self._TIMEOUT2:
return None
t2 = time()
dt = int((t1 - t0) * 1000000)
if dt > 530:
return None
distance = ((t2 - t1) * 1000000 / 29 / 2) # cm
return distance
def read(self):
while True:
dist = self._get_distance()
if dist:
return dist
class GroveUltrasonicRanger(object):
def __init__(self, pin):
# Register a single pin for ultrasonic snesor
self.dio = GPIO(pin)
def _get_distance(self):
# OUT mode (trigger)
# sends out a short pulse (low-high-low)
self.dio.dir(GPIO.OUT)
self.dio.write(0)
usleep(2)
self.dio.write(1)
usleep(10)
self.dio.write(0)
# IN mode (echo)
self.dio.dir(GPIO.IN)
t0 = time.time()
count = 0
while count < _TIMEOUT1:
if self.dio.read():
break
count += 1
if count >= _TIMEOUT1:
return None
t1 = time.time()
count = 0
while count < _TIMEOUT2:
if not self.dio.read():
break
count += 1
if count >= _TIMEOUT2:
return None
t2 = time.time()
dt = int((t1 - t0) * 1000000)
if dt > 530:
return None
distance = ((t2 - t1) * 1000000 / 29 / 2) # cm
return distance
def get_distance(self):
while True:
dist = self._get_distance()
if dist:
return dist
class SensorDistancia(object):
def __init__(self, pin):
self.distancia = GPIO(pin)
def _get_distance(self):
usleep = lambda x: time.sleep(x / 1000000.0)
_TIMEOUT1 = 1000
_TIMEOUT2 = 10000
self.distancia.dir(GPIO.OUT)
self.distancia.write(0)
usleep(2)
self.distancia.write(1)
usleep(10)
self.distancia.write(0)
self.distancia.dir(GPIO.IN)
t0 = time.time()
count = 0
while count < _TIMEOUT1:
if self.distancia.read():
break
count += 1
if count >= _TIMEOUT1:
return None
t1 = time.time()
count = 0
while count < _TIMEOUT2:
if not self.distancia.read():
break
count += 1
if count >= _TIMEOUT2:
return None
t2 = time.time()
dt = int((t1 - t0) * 1000000)
if dt > 530:
return None
distance = ((t2 - t1) * 1000000 / 29 / 2) # cm
return distance
def get_distance(self):
while True:
dist = self._get_distance()
if dist:
return dist
class DHT(object):
DHT_TYPE = {'DHT11': '11', 'DHT22': '22', 'DHT10': '10'}
DEFAULT_ADDR = 0x38
RESET_REG_ADDR = 0xba
MAX_CNT = 320
PULSES_CNT = 41
def __init__(self, dht_type, pin=12, bus_num=1):
if dht_type != self.DHT_TYPE['DHT11'] and dht_type != self.DHT_TYPE[
'DHT22'] and dht_type != self.DHT_TYPE['DHT10']:
print('ERROR: Please use 11|22|10 as dht type.')
exit(1)
self.dht_type = dht_type
if dht_type == self.DHT_TYPE['DHT10']:
self.bus = Bus(bus_num)
self.addr = self.DEFAULT_ADDR
self._dht10_init()
else:
self.pin = GPIO(pin, GPIO.OUT)
self._last_temp = 0.0
self._last_humi = 0.0
@property
def dht_type(self):
return self._dht_type
@dht_type.setter
def dht_type(self, type):
self._dht_type = type
######################## dht10 ############################
def _dht10_start_mess(self):
reg_set = [0x33, 0x00]
self.bus.write_i2c_block_data(self.addr, 0xac, reg_set)
def _dht10_reset(self):
self.bus.write_byte(self.addr, self.RESET_REG_ADDR)
def _dht10_set_system_cfg(self):
reg_set = [0x08, 0x00]
self.bus.write_i2c_block_data(self.addr, 0xe1, reg_set)
def _dht10_read_status(self):
return self.bus.read_byte_data(self.addr, 0)
def _dht10_init(self):
time.sleep(.5)
self._dht10_reset()
# delay is needed after reset
time.sleep(.3)
self._dht10_set_system_cfg()
status = self._dht10_read_status()
# we must check the calibrate flag, bit[3] : 1 for calibrated ok,0 for Not calibrated.
while status & 0x08 != 0x08:
print("try calibrated again!n\n")
self._dht10_reset()
time.sleep(.5)
self.bus.dth10_set_system_cfg()
status = self._dht10_read_status()
time.sleep(.5)
#########################################################
def _read(self):
if self.dht_type == self.DHT_TYPE['DHT10']:
t = 0
h = 0
self._dht10_start_mess()
time.sleep(.075)
# we must check the device busy flag, bit[7] : 1 for busy ,0 for idle.
while (self._dht10_read_status() & 0x80) != 0:
time.sleep(.5)
print("wait for device not busy")
from smbus2 import SMBus, i2c_msg, SMBusWrapper
with SMBusWrapper(1) as bus:
msg = i2c_msg.read(self.addr, 6)
data = bus.i2c_rdwr(msg)
data = list(msg)
t = (t | data[1]) << 8
t = (t | data[2]) << 8
t = (t | data[3]) >> 4
h = (h | data[3]) << 8
h = (h | data[4]) << 8
h = (h | data[5]) & 0xfffff
t = t * 100.0 / 1024 / 1024
h = h * 200.0 / 1024 / 1024 - 50
return t, h
# Send Falling signal to trigger sensor output data
# Wait for 20ms to collect 42 bytes data
else:
self.pin.dir(GPIO.OUT)
self.pin.write(1)
time.sleep(.2)
self.pin.write(0)
time.sleep(.018)
self.pin.dir(GPIO.IN)
# a short delay needed
for i in range(10):
pass
# pullup by host 20-40 us
count = 0
while self.pin.read():
count += 1
if count > self.MAX_CNT:
# print("pullup by host 20-40us failed")
return None, "pullup by host 20-40us failed"
pulse_cnt = [0] * (2 * self.PULSES_CNT)
fix_crc = False
for i in range(0, self.PULSES_CNT * 2, 2):
while not self.pin.read():
pulse_cnt[i] += 1
if pulse_cnt[i] > self.MAX_CNT:
# print("pulldown by DHT timeout %d" % i)
return None, "pulldown by DHT timeout %d" % i
while self.pin.read():
pulse_cnt[i + 1] += 1
if pulse_cnt[i + 1] > self.MAX_CNT:
# print("pullup by DHT timeout %d" % (i + 1))
if i == (self.PULSES_CNT - 1) * 2:
# fix_crc = True
# break
pass
return None, "pullup by DHT timeout %d" % i
total_cnt = 0
for i in range(2, 2 * self.PULSES_CNT, 2):
total_cnt += pulse_cnt[i]
# Low level ( 50 us) average counter
average_cnt = total_cnt / (self.PULSES_CNT - 1)
# print("low level average loop = %d" % average_cnt)
data = ''
for i in range(3, 2 * self.PULSES_CNT, 2):
if pulse_cnt[i] > average_cnt:
data += '1'
else:
data += '0'
data0 = int(data[0:8], 2)
data1 = int(data[8:16], 2)
data2 = int(data[16:24], 2)
data3 = int(data[24:32], 2)
data4 = int(data[32:40], 2)
if fix_crc and data4 != ((data0 + data1 + data2 + data3) & 0xFF):
data4 = data4 ^ 0x01
data = data[0:self.PULSES_CNT - 2] + ('1' if data4
& 0x01 else '0')
if data4 == ((data0 + data1 + data2 + data3) & 0xFF):
if self._dht_type == self.DHT_TYPE['DHT11']:
humi = int(data0)
temp = int(data2)
elif self._dht_type == self.DHT_TYPE['DHT22']:
humi = float(int(data[0:16], 2) * 0.1)
temp = float(
int(data[17:32], 2) * 0.2 * (0.5 - int(data[16], 2)))
else:
# print("checksum error!")
return None, "checksum error!"
return humi, temp
def read(self, retries=15):
for i in range(retries):
humi, temp = self._read()
if not humi is None:
break
if humi is None:
return self._last_humi, self._last_temp
self._last_humi, self._last_temp = humi, temp
return humi, temp
class Grove4DigitDisplay(object):
colon_index = 1
def __init__(self, clk, dio, brightness=BRIGHT_DEFAULT):
self.brightness = brightness
self.clk = GPIO(clk, direction=GPIO.OUT)
self.dio = GPIO(dio, direction=GPIO.OUT)
self.data = [0] * 4
self.show_colon = False
def clear(self):
self.show_colon = False
self.data = [0] * 4
self._show()
def show(self, data):
if type(data) is str:
for i, c in enumerate(data):
if c in charmap:
self.data[i] = charmap[c]
else:
self.data[i] = 0
if i == self.colon_index and self.show_colon:
self.data[i] |= 0x80
if i == 3:
break
elif type(data) is int:
self.data = [0, 0, 0, charmap['0']]
if data < 0:
negative = True
data = -data
else:
negative = False
index = 3
while data != 0:
self.data[index] = charmap[str(data % 10)]
index -= 1
if index < 0:
break
data = int(data / 10)
if negative:
if index >= 0:
self.data[index] = charmap['-']
else:
self.data = charmap['_'] + [charmap['9']] * 3
else:
raise ValueError('Not support {}'.format(type(data)))
self._show()
def _show(self):
with self:
self._transfer(ADDR_AUTO)
with self:
self._transfer(STARTADDR)
for i in range(4):
self._transfer(self.data[i])
with self:
self._transfer(0x88 + self.brightness)
def update(self, index, value):
if index < 0 or index > 4:
return
if value in charmap:
self.data[index] = charmap[value]
else:
self.data[index] = 0
if index == self.colon_index and self.show_colon:
self.data[index] |= 0x80
with self:
self._transfer(ADDR_FIXED)
with self:
self._transfer(STARTADDR | index)
self._transfer(self.data[index])
with self:
self._transfer(0x88 + self.brightness)
def set_brightness(self, brightness):
if brightness > 7:
brightness = 7
self.brightness = brightness
self._show()
def set_colon(self, enable):
self.show_colon = enable
if self.show_colon:
self.data[self.colon_index] |= 0x80
else:
self.data[self.colon_index] &= 0x7F
self._show()
def _transfer(self, data):
for _ in range(8):
self.clk.write(0)
if data & 0x01:
self.dio.write(1)
else:
self.dio.write(0)
data >>= 1
time.sleep(0.000001)
self.clk.write(1)
time.sleep(0.000001)
self.clk.write(0)
self.dio.write(1)
self.clk.write(1)
self.dio.dir(GPIO.IN)
while self.dio.read():
time.sleep(0.001)
if self.dio.read():
self.dio.dir(GPIO.OUT)
self.dio.write(0)
self.dio.dir(GPIO.IN)
self.dio.dir(GPIO.OUT)
def _start(self):
self.clk.write(1)
self.dio.write(1)
self.dio.write(0)
self.clk.write(0)
def _stop(self):
self.clk.write(0)
self.dio.write(0)
self.clk.write(1)
self.dio.write(1)
def __enter__(self):
self._start()
def __exit__(self, exc_type, exc_val, exc_tb):
self._stop()
class UltrasonicRanger(object):
"""
[Digital GPIO]
Ultra Soonic Ranger class for:
Ultra Sonic Ranger (https://wiki.seeedstudio.com/Grove-Ultrasonic_Ranger/)
Args:
pin(int): number of digital pin/channel the sensor connected.
"""
def __init__(self, pin):
self.dio =GPIO(pin)
def get_distance(self):
self.dio.dir(GPIO.OUT)
self.dio.write(0)
usleep(2)
self.dio.write(1)
usleep(10)
self.dio.write(0)
self.dio.dir(GPIO.IN)
t0 = time.time()
count = 0
while count < _TIMEOUT1:
if self.dio.read():
break
count += 1
if count >= _TIMEOUT1:
return None
t1 = time.time()
count = 0
while count < _TIMEOUT2:
if not self.dio.read():
break
count += 1
if count >= _TIMEOUT2:
return None
t2 = time.time()
dt = int((t1 - t0) * 1000000)
if dt > 530:
return None
distance = ((t2 - t1) * 1000000 / 29 / 2) # cm
return round(distance, 1)
def convert_distance_to_water_level(self):
distance = self.get_distance()
if distance is None:
return -1
absolute_distance_cm = distance - _MIN_WATER_LEVEL_CM
distance_percentage = (absolute_distance_cm * 100) / _MAX_WATER_LEVEL_CM
water_level_percentage = 100 - distance_percentage
return round(water_level_percentage, 1)
