def __init__(self, parent, main):
QtGui.QWidget.__init__(self, parent)
self.main = main
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
mainLayout = QtGui.QHBoxLayout()
mainLayout.setContentsMargins(0, 0, 0, 0)
mainLayout.setSpacing(0)
self.setLayout(mainLayout)
#########################################
## Editor/Terminal on left, Compiler Bar on right
self.editorCompilerSplitter = QtGui.QSplitter(self)
mainLayout.addWidget(self.editorCompilerSplitter, 20)
self.editorCompilerSplitter.setOrientation(QtCore.Qt.Horizontal)
####################################################
## Editor at top, Terminal at bottom Splitter
self.editorTerminalSplitter = QtGui.QSplitter(self)
self.editorTerminalSplitter.setOrientation(QtCore.Qt.Vertical)
self.editorCompilerSplitter.addWidget(self.editorTerminalSplitter)
#########################################
## Editor Widget
self.editor = EditorWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.editor)
#########################################
## Terminal Widget
self.terminalWidget = TerminalWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.terminalWidget)
##############################################################
### Arduino Compiler Bar
self.arduinoCompilerBar = ArduinoCompilerBar(self, self.main)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("compile_action"),
self.on_compile_action)
self.connect(self.arduinoCompilerBar,
QtCore.SIGNAL("project_settings_changed"),
self.on_project_settings_changed)
self.editorCompilerSplitter.addWidget(self.arduinoCompilerBar)
## Layout tweeks - TODO store thas in project
self.editorCompilerSplitter.setStretchFactor(0, 2)
self.editorCompilerSplitter.setStretchFactor(1, 0)
self.editorTerminalSplitter.setStretchFactor(0, 5)
self.editorTerminalSplitter.setStretchFactor(1, 2)
def __init__(self, parent, main):
QtGui.QWidget.__init__(self, parent)
self.main = main
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
mainLayout = QtGui.QHBoxLayout()
mainLayout.setContentsMargins(0, 0, 0, 0)
mainLayout.setSpacing(0)
self.setLayout(mainLayout)
#########################################
## Editor/Terminal on left, Compiler Bar on right
self.editorCompilerSplitter = QtGui.QSplitter(self)
mainLayout.addWidget(self.editorCompilerSplitter, 20)
self.editorCompilerSplitter.setOrientation(QtCore.Qt.Horizontal)
####################################################
## Editor at top, Terminal at bottom Splitter
self.editorTerminalSplitter = QtGui.QSplitter(self)
self.editorTerminalSplitter.setOrientation(QtCore.Qt.Vertical)
self.editorCompilerSplitter.addWidget(self.editorTerminalSplitter)
#########################################
## Editor Widget
self.editor = EditorWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.editor)
#########################################
## Terminal Widget
self.terminalWidget = TerminalWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.terminalWidget)
##############################################################
### Arduino Compiler Bar
self.arduinoCompilerBar = ArduinoCompilerBar(self, self.main)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("compile_action"), self.on_compile_action)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("project_settings_changed"), self.on_project_settings_changed)
self.editorCompilerSplitter.addWidget(self.arduinoCompilerBar)
## Layout tweeks - TODO store thas in project
self.editorCompilerSplitter.setStretchFactor(0, 2)
self.editorCompilerSplitter.setStretchFactor(1, 0)
self.editorTerminalSplitter.setStretchFactor(0, 5)
self.editorTerminalSplitter.setStretchFactor(1, 2)
class ArduinoEditorWidget(QtGui.QWidget):
def __init__(self, parent, main):
QtGui.QWidget.__init__(self, parent)
self.main = main
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
mainLayout = QtGui.QHBoxLayout()
mainLayout.setContentsMargins(0, 0, 0, 0)
mainLayout.setSpacing(0)
self.setLayout(mainLayout)
#########################################
## Editor/Terminal on left, Compiler Bar on right
self.editorCompilerSplitter = QtGui.QSplitter(self)
mainLayout.addWidget(self.editorCompilerSplitter, 20)
self.editorCompilerSplitter.setOrientation(QtCore.Qt.Horizontal)
####################################################
## Editor at top, Terminal at bottom Splitter
self.editorTerminalSplitter = QtGui.QSplitter(self)
self.editorTerminalSplitter.setOrientation(QtCore.Qt.Vertical)
self.editorCompilerSplitter.addWidget(self.editorTerminalSplitter)
#########################################
## Editor Widget
self.editor = EditorWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.editor)
#########################################
## Terminal Widget
self.terminalWidget = TerminalWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.terminalWidget)
##############################################################
### Arduino Compiler Bar
self.arduinoCompilerBar = ArduinoCompilerBar(self, self.main)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("compile_action"),
self.on_compile_action)
self.connect(self.arduinoCompilerBar,
QtCore.SIGNAL("project_settings_changed"),
self.on_project_settings_changed)
self.editorCompilerSplitter.addWidget(self.arduinoCompilerBar)
## Layout tweeks - TODO store thas in project
self.editorCompilerSplitter.setStretchFactor(0, 2)
self.editorCompilerSplitter.setStretchFactor(1, 0)
self.editorTerminalSplitter.setStretchFactor(0, 5)
self.editorTerminalSplitter.setStretchFactor(1, 2)
##########################################
## Load Project
##########################################
def load_project(self, project_file_path, tabIndex=None):
# checks its a file, then laods editor
## TODO - maybe check for .pde only
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
fileInfo = QtCore.QFileInfo(project_file_path)
if fileInfo.isDir():
self.emit(QtCore.SIGNAL("open_file"), None)
self.editor.setText("")
self.lblFileName.setText("")
self.lblFileSize.setText("")
self.lblFileModified.setText("")
## TODO throw warning
return
self.project_file_path = fileInfo.filePath()
self.project_settings_file = fileInfo.absolutePath().append(
"/project_settings.yaml")
self.load_project_settings()
self.editor.load_file(self.project_file_path)
self.arduinoCompilerBar.set_project(self.project_settings)
##########################################
## Compile Events
##########################################
def on_compile_action(self, compile_action):
print "on_compile_action", compile_action
## Save file
if self.editor.save_file():
## Set up compiler
compiler = app.Compiler.Compiler(self)
self.connect(compiler, QtCore.SIGNAL("compile_log"),
self.terminalWidget.on_compile_log)
dic = self.project_settings.copy(
) ## Dnnt know why, maybe a pass back is them not by red
dic['file_path'] = self.project_file_path
## make, and only upload with "uplod_compile"
if compile_action == 'compile' or compile_action == 'upload_compile':
compiler.arduino_make_project(dic)
if compile_action == 'upload' or compile_action == 'upload_compile':
compiler.arduino_upload_project(dic)
##########################################
## Project Settings
##########################################
def on_project_settings_changed(self, new_project_settings):
self.project_settings = new_project_settings
self.save_project_settings()
def save_project_settings(self):
yaml_string = yaml.dump(self.project_settings,
Dumper=Dumper,
default_flow_style=False)
app.utils.write_file(self.project_settings_file, yaml_string)
#print "project_settings_saved", self.project_settings, self.project_settings_file
def load_project_settings(self):
fileInfo = QtCore.QFileInfo(self.project_settings_file)
if fileInfo.exists():
self.project_settings = app.utils.load_yaml(
self.project_settings_file)
else:
self.project_settings = None
#print "project_settings", self.project_settings
class ArduinoEditorWidget(QtGui.QWidget):
def __init__(self, parent, main):
QtGui.QWidget.__init__(self, parent)
self.main = main
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
mainLayout = QtGui.QHBoxLayout()
mainLayout.setContentsMargins(0, 0, 0, 0)
mainLayout.setSpacing(0)
self.setLayout(mainLayout)
#########################################
## Editor/Terminal on left, Compiler Bar on right
self.editorCompilerSplitter = QtGui.QSplitter(self)
mainLayout.addWidget(self.editorCompilerSplitter, 20)
self.editorCompilerSplitter.setOrientation(QtCore.Qt.Horizontal)
####################################################
## Editor at top, Terminal at bottom Splitter
self.editorTerminalSplitter = QtGui.QSplitter(self)
self.editorTerminalSplitter.setOrientation(QtCore.Qt.Vertical)
self.editorCompilerSplitter.addWidget(self.editorTerminalSplitter)
#########################################
## Editor Widget
self.editor = EditorWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.editor)
#########################################
## Terminal Widget
self.terminalWidget = TerminalWidget(self, self.main)
self.editorTerminalSplitter.addWidget(self.terminalWidget)
##############################################################
### Arduino Compiler Bar
self.arduinoCompilerBar = ArduinoCompilerBar(self, self.main)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("compile_action"), self.on_compile_action)
self.connect(self.arduinoCompilerBar, QtCore.SIGNAL("project_settings_changed"), self.on_project_settings_changed)
self.editorCompilerSplitter.addWidget(self.arduinoCompilerBar)
## Layout tweeks - TODO store thas in project
self.editorCompilerSplitter.setStretchFactor(0, 2)
self.editorCompilerSplitter.setStretchFactor(1, 0)
self.editorTerminalSplitter.setStretchFactor(0, 5)
self.editorTerminalSplitter.setStretchFactor(1, 2)
##########################################
## Load Project
##########################################
def load_project(self, project_file_path, tabIndex=None):
# checks its a file, then laods editor
## TODO - maybe check for .pde only
self.project_file_path = None
self.project_settings_file = None
self.project_settings = None
fileInfo = QtCore.QFileInfo(project_file_path)
if fileInfo.isDir():
self.emit(QtCore.SIGNAL("open_file"), None)
self.editor.setText("")
self.lblFileName.setText("")
self.lblFileSize.setText("")
self.lblFileModified.setText("")
## TODO throw warning
return
self.project_file_path = fileInfo.filePath()
self.project_settings_file = fileInfo.absolutePath().append("/project_settings.yaml")
self.load_project_settings()
self.editor.load_file(self.project_file_path)
self.arduinoCompilerBar.set_project(self.project_settings)
##########################################
## Compile Events
##########################################
def on_compile_action(self, compile_action):
print "on_compile_action", compile_action
## Save file
if self.editor.save_file():
## Set up compiler
compiler = app.Compiler.Compiler(self)
self.connect(compiler, QtCore.SIGNAL("compile_log"), self.terminalWidget.on_compile_log)
dic = self.project_settings.copy() ## Dnnt know why, maybe a pass back is them not by red
dic['file_path'] = self.project_file_path
## make, and only upload with "uplod_compile"
if compile_action == 'compile' or compile_action == 'upload_compile':
compiler.arduino_make_project(dic)
if compile_action == 'upload' or compile_action == 'upload_compile':
compiler.arduino_upload_project(dic)
##########################################
## Project Settings
##########################################
def on_project_settings_changed(self, new_project_settings):
self.project_settings = new_project_settings
self.save_project_settings()
def save_project_settings(self):
yaml_string = yaml.dump(self.project_settings, Dumper=Dumper, default_flow_style=False)
app.utils.write_file(self.project_settings_file, yaml_string)
#print "project_settings_saved", self.project_settings, self.project_settings_file
def load_project_settings(self):
fileInfo = QtCore.QFileInfo(self.project_settings_file)
if fileInfo.exists():
self.project_settings =app.utils.load_yaml(self.project_settings_file)
else:
self.project_settings = None
#print "project_settings", self.project_settings
