def __init__(self, entry_settings, filename, main=None):
QtGui.QWidget.__init__(self, main)
self.main = main
self.setWindowTitle('Lockin scan monitor')
self.setMinimumSize(1200, 600)
self.entry_settings = entry_settings
# set up batch list display
self.batchListWidget = JPLBatchListWidget(entry_settings)
batchArea = QtGui.QScrollArea()
batchArea.setWidgetResizable(True)
batchArea.setWidget(self.batchListWidget)
batchDisplay = QtGui.QGroupBox()
batchDisplay.setTitle('Batch List')
batchLayout = QtGui.QVBoxLayout()
batchLayout.addWidget(batchArea)
batchDisplay.setLayout(batchLayout)
# set up single scan monitor + daq class
self.singleScan = SingleScan(filename, parent=self, main=self.main)
# set up progress bar
self.currentProgBar = QtGui.QProgressBar()
self.totalProgBar = QtGui.QProgressBar()
progressDisplay = QtGui.QWidget()
progressLayout = QtGui.QGridLayout()
progressLayout.addWidget(QtGui.QLabel('Current Progress'), 0, 0)
progressLayout.addWidget(self.currentProgBar, 0, 1)
progressLayout.addWidget(QtGui.QLabel('Total progress'), 1, 0)
progressLayout.addWidget(self.totalProgBar, 1, 1)
progressDisplay.setLayout(progressLayout)
mainLayout = QtGui.QGridLayout()
mainLayout.addWidget(batchDisplay, 0, 0, 1, 2)
mainLayout.addWidget(self.singleScan, 0, 2, 1, 3)
mainLayout.addWidget(progressDisplay, 1, 0, 1, 5)
self.setLayout(mainLayout)
# Initiate progress bar
total_time = ceil(Shared.jpl_scan_time(entry_settings))
self.totalProgBar.setRange(0, total_time)
self.totalProgBar.setValue(0)
self.batch_time_taken = 0
# Start scan
self.next_entry_signal.connect(self.next_entry)
# this makes sure batch starts at index 0
self.current_entry_index = -1
self.next_entry_signal.emit()
def __init__(self, entry_settings, filename, main=None):
QtGui.QWidget.__init__(self, main)
self.main = main
self.setWindowTitle('Lockin scan monitor')
self.setMinimumSize(1200, 600)
self.entry_settings = entry_settings
# set up batch list display
self.batchListWidget = JPLBatchListWidget(entry_settings)
batchArea = QtGui.QScrollArea()
batchArea.setWidgetResizable(True)
batchArea.setWidget(self.batchListWidget)
batchDisplay = QtGui.QGroupBox()
batchDisplay.setTitle('Batch List')
batchLayout = QtGui.QVBoxLayout()
batchLayout.addWidget(batchArea)
batchDisplay.setLayout(batchLayout)
# set up single scan monitor + daq class
self.singleScan = SingleScan(filename, parent=self, main=self.main)
# set up progress bar
self.currentProgBar = QtGui.QProgressBar()
self.totalProgBar = QtGui.QProgressBar()
progressDisplay = QtGui.QWidget()
progressLayout = QtGui.QGridLayout()
progressLayout.addWidget(QtGui.QLabel('Current Progress'), 0, 0)
progressLayout.addWidget(self.currentProgBar, 0, 1)
progressLayout.addWidget(QtGui.QLabel('Total progress'), 1, 0)
progressLayout.addWidget(self.totalProgBar, 1, 1)
progressDisplay.setLayout(progressLayout)
mainLayout = QtGui.QGridLayout()
mainLayout.addWidget(batchDisplay, 0, 0, 1, 2)
mainLayout.addWidget(self.singleScan, 0, 2, 1, 3)
mainLayout.addWidget(progressDisplay, 1, 0, 1, 5)
self.setLayout(mainLayout)
# Initiate progress bar
total_time = ceil(Shared.jpl_scan_time(entry_settings))
self.totalProgBar.setRange(0, total_time)
self.totalProgBar.setValue(0)
self.batch_time_taken = 0
# Start scan
self.next_entry_signal.connect(self.next_entry)
# this makes sure batch starts at index 0
self.current_entry_index = -1
self.next_entry_signal.emit()
def on_scan_jpl(self):
# when invoke this dialog, pause live lockin monitor in the main panel
self.liaMonitor.stop()
# if it is test mode, or real-run mode with instrument correctly connected
if self.testModeAction.isChecked() or (self.synHandle
and self.liaHandle):
dconfig = ScanLockin.JPLScanConfig(main=self)
entry_settings = None
dconfig_result = dconfig.exec_()
else:
# instrument handle is None, pop up error
msg = Shared.MsgError(
self, 'Instrument Offline!',
'Connect to the synthesizer and lockin first before proceed.')
msg.exec_()
return None
# this loop makes sure the config dialog does not disappear
# unless the settings are all valid / or user hits cancel
while dconfig_result: # if dialog accepted
entry_settings, filename = dconfig.get_settings()
if entry_settings:
total_time = Shared.jpl_scan_time(entry_settings)
now = datetime.datetime.today()
length = datetime.timedelta(seconds=total_time)
then = now + length
text = 'This batch job is estimated to take {:s}.\nIt is expected to finish at {:s}.'.format(
str(length), then.strftime('%I:%M %p, %m-%d-%Y (%a)'))
q = Shared.MsgInfo(self, 'Time Estimation', text)
q.addButton(QtGui.QMessageBox.Cancel)
qres = q.exec_()
if qres == QtGui.QMessageBox.Ok:
break
else:
dconfig_result = dconfig.exec_()
else:
dconfig_result = dconfig.exec_()
if entry_settings and dconfig_result:
dscan = ScanLockin.JPLScanWindow(entry_settings,
filename,
main=self)
dscan.exec_()
else:
pass
def on_scan_jpl(self):
# when invoke this dialog, pause live lockin monitor in the main panel
self.liaMonitor.stop()
# if it is test mode, or real-run mode with instrument correctly connected
if self.testModeAction.isChecked() or (self.synHandle and self.liaHandle):
dconfig = ScanLockin.JPLScanConfig(main=self)
entry_settings = None
dconfig_result = dconfig.exec_()
else:
# instrument handle is None, pop up error
msg = Shared.MsgError(self, 'Instrument Offline!', 'Connect to the synthesizer and lockin first before proceed.')
msg.exec_()
return None
# this loop makes sure the config dialog does not disappear
# unless the settings are all valid / or user hits cancel
while dconfig_result: # if dialog accepted
entry_settings, filename = dconfig.get_settings()
if entry_settings:
total_time = Shared.jpl_scan_time(entry_settings)
now = datetime.datetime.today()
length = datetime.timedelta(seconds=total_time)
then = now + length
text = 'This batch job is estimated to take {:s}.\nIt is expected to finish at {:s}.'.format(str(length), then.strftime('%I:%M %p, %m-%d-%Y (%a)'))
q = Shared.MsgInfo(self, 'Time Estimation', text)
q.addButton(QtGui.QMessageBox.Cancel)
qres = q.exec_()
if qres == QtGui.QMessageBox.Ok:
break
else:
dconfig_result = dconfig.exec_()
else:
dconfig_result = dconfig.exec_()
if entry_settings and dconfig_result:
dscan = ScanLockin.JPLScanWindow(entry_settings, filename, main=self)
dscan.exec_()
else:
pass