def run_interactive_mode():
"""
Run outliers in interactive mode.
In this mode, outliers will run onces and then stop.
"""
# Initialize Elasticsearch connection
while not es.init_connection():
time.sleep(60)
if settings.config.getboolean("general", "es_wipe_all_existing_outliers"):
es.remove_all_outliers()
# Make sure housekeeping is up and running
housekeeping_job = HousekeepingJob()
housekeeping_job.start()
# The difference with daemon mode is that in interactive mode, we want to allow the user to stop execution on the
# command line, interactively.
try:
analyzed_models = perform_analysis(housekeeping_job)
print_analysis_summary(analyzed_models)
except KeyboardInterrupt:
logging.logger.info(
"keyboard interrupt received, stopping housekeeping thread")
finally:
logging.logger.info(
"asking housekeeping jobs to shutdown after finishing")
housekeeping_job.stop_housekeeping()
logging.logger.info("finished performing outlier detection")
def run_interactive_mode():
es.init_connection()
if settings.config.getboolean("general", "es_wipe_all_existing_outliers"):
es.remove_all_outliers()
# Make sure housekeeping is up and running
housekeeping_job = HousekeepingJob()
housekeeping_job.start()
try:
analyzed_models = perform_analysis()
print_analysis_summary(analyzed_models)
except KeyboardInterrupt:
logging.logger.info(
"keyboard interrupt received, stopping housekeeping thread")
except Exception:
logging.logger.error("error running outliers in interactive mode",
exc_info=True)
finally:
logging.logger.info(
"asking housekeeping jobs to shutdown after finishing")
housekeeping_job.shutdown_flag.set()
housekeeping_job.join()
logging.logger.info("finished performing outlier detection")
def run_daemon_mode():
"""
Run outliers in daemon mode.
In this mode, outliers will continue running based on the cron scheduled defined in the configuration file.
"""
# In daemon mode, we also want to monitor the configuration file for changes.
# In case of a change, we need to make sure that we are using this new configuration file
for config_file in settings.args.config:
logging.logger.info("monitoring configuration file %s for changes",
config_file)
# Monitor configuration files for potential changes
file_mod_watcher = FileModificationWatcher()
file_mod_watcher.add_files(settings.args.config)
# Initialize Elasticsearch connection
while not es.init_connection():
time.sleep(60)
# Create housekeeping job, don't start it yet
housekeeping_job = HousekeepingJob()
first_run = True
run_succeeded_without_errors = None
# The daemon should run forever, until the user kills it
while True:
next_run = None
should_schedule_next_run = False
# This loop will run for as long we don't need to perform an analysis
while (next_run is None or datetime.now() < next_run) and first_run is False and \
run_succeeded_without_errors is True:
# Check if we already know when to perform the analysis next; if not, we need to schedule it
if next_run is None:
should_schedule_next_run = True
# Check for configuration file changes and load them in case it's needed
if file_mod_watcher.files_changed():
logging.logger.info("configuration file changed, reloading")
settings.process_configuration_files()
should_schedule_next_run = True
# Schedule a next rune based on the cron schedule defined in the configuration file
if should_schedule_next_run:
next_run = croniter(settings.config.get("daemon", "schedule"),
datetime.now()).get_next(datetime)
logging.logger.info(
"next run scheduled on {0:%Y-%m-%d %H:%M:%S}".format(
next_run))
should_schedule_next_run = False
# Wait 5 seconds before checking the cron schedule again
time.sleep(5)
# Refresh settings in case the cron has changed for example
settings.process_configuration_files()
# On the first run, we might have to wipe all the existing outliers if this is set in the configuration file
if first_run:
first_run = False
logging.logger.info(
"first run, so we will start immediately - after this, we will respect the cron "
"schedule defined in the configuration file")
# Wipe all existing outliers if needed
if settings.config.getboolean("general",
"es_wipe_all_existing_outliers"):
logging.logger.info(
"wiping all existing outliers on first run")
es.remove_all_outliers()
# Make sure we are still connected to Elasticsearch before analyzing, in case something went wrong with
# the connection in between runs
while not es.init_connection():
time.sleep(60)
# Make sure housekeeping is up and running
if not housekeeping_job.is_alive():
housekeeping_job.start()
# Perform analysis and print the analysis summary at the end
logging.print_generic_intro("starting outlier detection")
analyzed_models = perform_analysis(housekeeping_job)
print_analysis_summary(analyzed_models)
errored_models = [
analyzer for analyzer in analyzed_models
if analyzer.unknown_error_analysis
]
# Check the result of the analysis. In case an error occured, we want to re-run right away (after a minute)
if errored_models:
run_succeeded_without_errors = False
logging.logger.warning(
"ran into errors while analyzing use cases - not going to wait for the cron "
"schedule, we just start analyzing again after sleeping for a minute first"
)
time.sleep(60)
else:
run_succeeded_without_errors = True
logging.print_generic_intro("finished performing outlier detection")
def run_daemon_mode():
# In daemon mode, we also want to monitor the configuration file for changes.
# In case of a change, we need to make sure that we are using this new configuration file
for config_file in settings.args.config:
logging.logger.info("monitoring configuration file " + config_file +
" for changes")
file_mod_watcher = FileModificationWatcher()
file_mod_watcher.add_files(settings.args.config)
# Initialize Elasticsearch connection
es.init_connection()
# Create housekeeping job, don't start it yet
housekeeping_job = HousekeepingJob()
num_runs = 0
first_run = True
run_succeeded_without_errors = None
while True:
num_runs += 1
next_run = None
should_schedule_next_run = False
while (next_run is None or datetime.now() < next_run) and first_run is False and \
run_succeeded_without_errors is True:
if next_run is None:
should_schedule_next_run = True
# Check for configuration file changes and load them in case it's needed
if file_mod_watcher.files_changed():
logging.logger.info("configuration file changed, reloading")
settings.process_configuration_files()
should_schedule_next_run = True
if should_schedule_next_run:
next_run = croniter(settings.config.get("daemon", "schedule"),
datetime.now()).get_next(datetime)
logging.logger.info(
"next run scheduled on {0:%Y-%m-%d %H:%M:%S}".format(
next_run))
should_schedule_next_run = False
time.sleep(5)
settings.process_configuration_files() # Refresh settings
if first_run:
first_run = False
logging.logger.info(
"first run, so we will start immediately - after this, we will respect the cron "
+ "schedule defined in the configuration file")
# Wipe all existing outliers if needed
if settings.config.getboolean("general",
"es_wipe_all_existing_outliers"):
logging.logger.info(
"wiping all existing outliers on first run")
es.remove_all_outliers()
else:
# Make sure we are still connected to Elasticsearch before analyzing, in case something went wrong with
# the connection in between runs
es.init_connection()
# Make sure housekeeping is up and running
if not housekeeping_job.is_alive():
housekeeping_job.start()
# Perform analysis
logging.print_generic_intro("starting outlier detection")
analyzed_models = perform_analysis()
print_analysis_summary(analyzed_models)
errored_models = [
analyzer for analyzer in analyzed_models
if analyzer.unknown_error_analysis
]
# Check the result of the analysis
if errored_models:
run_succeeded_without_errors = False
logging.logger.warning(
"ran into errors while analyzing use cases - not going to wait for the cron "
+
"schedule, we just start analyzing again after sleeping for a minute first"
)
time.sleep(60)
else:
run_succeeded_without_errors = True
logging.print_generic_intro("finished performing outlier detection")
if settings.args.run_mode == "daemon":
# In daemon mode, we also want to monitor the configuration file for changes.
# In case of a change, we need to make sure that we are using this new configuration file
for config_file in settings.args.config:
logging.logger.info("monitoring configuration file " + config_file +
" for changes")
file_mod_watcher = FileModificationWatcher()
file_mod_watcher.add_files(settings.args.config)
# Initialize Elasticsearch connection
es.init_connection()
# Start housekeeping activities
housekeeping_job = HousekeepingJob()
housekeeping_job.start()
num_runs = 0
first_run = True
run_succeeded_without_errors = None
while True:
num_runs += 1
next_run = None
should_schedule_next_run = False
while (
next_run is None or datetime.now() < next_run
) and first_run is False and run_succeeded_without_errors is True:
if next_run is None:
should_schedule_next_run = True