def test_clean_and_id_rad_string(): """Test the clean_and_id_rad_string method.""" correct_str = '0.5 in. Gypsum Wall' incorrect_str = '0.5 in., Gypsum Wall' long_str = 'This is an exceptionally long text string that should never be used ' \ 'for the name of anything in EnergyPlus but is actually ok for Radiance' assert clean_and_id_rad_string(correct_str).startswith('0.5in.GypsumWall') assert clean_and_id_rad_string(incorrect_str).startswith( '0.5in.GypsumWall') assert len(clean_and_id_rad_string(long_str)) > 70
try: from honeybee_radiance.view import View except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) VIEW_TYPES = ('v', 'h', 'l', 'c', 'a') if all_required_inputs(ghenv.Component): # process the points/vectors into tuples _pos = (_position.X, _position.Y, _position.Z) _dir = (_direction.X, _direction.Y, _direction.Z) # set the default values name = clean_and_id_rad_string('View') if _name_ is None else _name_ _up_vec = (_up_vector_.X, _up_vector_.Y, _up_vector_.Z) if _up_vector_ \ is not None else (0, 0, 1) _type_ = 'v' if _view_type_ is None else VIEW_TYPES[_view_type_] _h_angle_ = 60 if _h_angle_ is None else _h_angle_ _v_angle_ = 60 if _v_angle_ is None else _v_angle_ view = View(clean_rad_string(name), _pos, _dir, _up_vec, _type_, _h_angle_, _v_angle_) if _name_ is not None: view.display_name = _name_
try: from honeybee_radiance.view import View except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) VIEW_TYPES = ('v', 'h', 'l', 'c', 'a') if all_required_inputs(ghenv.Component): # process the points/vectors into tuples _pos = (_position.X, _position.Y, _position.Z) _dir = (_direction.X, _direction.Y, _direction.Z) # set the default values name = 'RadianceView' if _name_ is None else _name_ _up_vec = (_up_vector_.X, _up_vector_.Y, _up_vector_.Z) if _up_vector_ \ is not None else (0, 0, 1) _type_ = 'v' if _view_type_ is None else VIEW_TYPES[_view_type_] _h_angle_ = 60 if _h_angle_ is None else _h_angle_ _v_angle_ = 60 if _v_angle_ is None else _v_angle_ view = View(clean_and_id_rad_string(name), _pos, _dir, _up_vec, _type_, _h_angle_, _v_angle_) if _name_ is not None: view.display_name = _name_
ghenv.Component.AdditionalHelpFromDocStrings = '4' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: from honeybee_radiance.view import View except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs from ladybug_rhino.viewport import viewport_by_name, viewport_properties except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) VIEW_TYPES = ('v', 'h', 'l', 'c', 'a') # set the default values _name_ = 'RadianceView' if _name_ is None else _name_ viewp = viewport_by_name(_viewport_) v_props = viewport_properties(viewp, _view_type_) view = View(clean_and_id_rad_string(_name_), v_props['position'], v_props['direction'], v_props['up_vector'], VIEW_TYPES[v_props['view_type']], v_props['h_angle'], v_props['v_angle']) view.display_name = _name_
try: # import the ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # check and duplicate the input objects group_shds = [] for shd in _shades: assert isinstance(shd, Shade), 'Expected Shade ' \ 'for dynamic shade group. Got {}.'.format(type(shd)) group_shds.append(shd.duplicate()) # set the name of the dynamic group name = clean_and_id_rad_string( 'ShadeGroup') if _name_ is None else clean_rad_string(_name_) for shd in group_shds: shd.properties.radiance.dynamic_group_identifier = name # assign any states if they are connected if len(states_) != 0: # convert the sub-face states to shade states shd_states = [ RadianceShadeState(st.modifier, st.shades) for st in states_ ] # assign states (including shades) to the first shade group_shds[0].properties.radiance.states = [ state.duplicate() for state in shd_states ] # remove shades from following shades to ensure they aren't double-counted
from honeybee.typing import clean_and_id_rad_string, clean_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: from honeybee_radiance.dynamic import StateGeometry except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import the ladybug_rhino dependencies from ladybug_rhino.togeometry import to_face3d from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): geo = [] # list of geometries that will be returned # set default name name = clean_and_id_rad_string('StateGeo') if _name_ is None \ else clean_and_id_rad_string(_name_) # create the StateGeometry i = 0 # iterator to ensure each geometry gets a unique name for rh_geo in _geo: for lb_face in to_face3d(rh_geo): hb_geo = StateGeometry('{}_{}'.format(name, i), lb_face, _modifier_) if _name_ is not None: hb_geo.display_name = _name_ geo.append(hb_geo)
ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string, clean_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Plastic except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.0 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ name = clean_and_id_rad_string('OpaqueMaterial') if _name_ is None else \ clean_rad_string(_name_) # create the modifier modifier = Plastic(name, _r_ref, _g_ref, _b_ref, _spec_, _rough_) if _name_ is not None: modifier.display_name = _name_
ghenv.Component.NickName = 'MetalMod3' ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Metal except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.9 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Metal(clean_and_id_rad_string(_name), _r_ref, _g_ref, _b_ref, _spec_, _rough_) modifier.display_name = _name
try: # import the honeybee-radiance dependencies from honeybee_radiance.sensorgrid import SensorGrid except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs from ladybug_rhino.togeometry import to_mesh3d except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default name and process the points to tuples name = 'SensorGrid' if _name_ is None else _name_ pts = [(pt.X, pt.Y, pt.Z) for pt in _positions] # create the sensor grid object if len(_directions_) == 0: grid = SensorGrid.from_planar_positions(clean_and_id_rad_string(name), pts, (0, 0, 1)) else: vecs = [(vec.X, vec.Y, vec.Z) for vec in _directions_] grid = SensorGrid.from_position_and_direction( clean_and_id_rad_string(name), pts, vecs) # set the display name if _name_ is not None: grid.display_name = _name_ if mesh_ is not None: grid.mesh = to_mesh3d(mesh_)
try: # import the ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # check and duplicate the input objects group_aps = [] for ap in _apertures: assert isinstance(ap, (Aperture, Door)), 'Expected Aperture or Door ' \ 'for dynamic group. Got {}.'.format(type(ap)) group_aps.append(ap.duplicate()) # set the name of the dynamic group name = clean_and_id_rad_string(_name_) if _name_ is not None else str( uuid.uuid4()) for ap in group_aps: ap.properties.radiance.dynamic_group_identifier = name # assign any states if they are connected if len(states_) != 0: # assign states (including shades) to the first aperture group_aps[0].properties.radiance.states = [ state.duplicate() for state in states_ ] # remove shades from following apertures to ensure they aren't double-counted states_wo_shades = [] for state in states_: new_state = state.duplicate()
ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '2' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Trans except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.0 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Trans.from_single_reflectance( clean_and_id_rad_string(_name), _diff_ref, _spec_, _rough_, _diff_trans, _spec_trans) modifier.display_name = _name
ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '2' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Metal except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.9 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Metal.from_single_reflectance( clean_and_id_rad_string(_name), _reflect, _spec_, _rough_) modifier.display_name = _name
ghenv.Component.NickName = 'OpaqueMod' ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '2' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Plastic except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.0 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Plastic.from_single_reflectance(clean_and_id_rad_string(_name), _reflect, _spec_, _rough_) modifier.display_name = _name
ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Trans except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.0 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Trans( clean_and_id_rad_string(_name), _r_diff_ref, _g_diff_ref, _b_diff_ref, _spec_, _rough_, _diff_trans, _spec_trans) modifier.display_name = _name
ghenv.Component.Name = 'HB Mirror Modifier 3' ghenv.Component.NickName = 'MirrorMod3' ghenv.Component.Message = '1.2.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = "1 :: Modifiers" ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_rad_string, clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Mirror except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): name = clean_and_id_rad_string('MirrorMaterial') if _name_ is None else \ clean_rad_string(_name_) # create the modifier modifier = Mirror(name, _r_ref, _g_ref, _b_ref) if _name_ is not None: modifier.display_name = _name_
ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Plastic except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default modifier properties _spec_ = 0.0 if _spec_ is None else _spec_ _rough_ = 0.0 if _rough_ is None else _rough_ # create the modifier modifier = Plastic( clean_and_id_rad_string(_name), _r_ref, _g_ref, _b_ref, _spec_, _rough_) modifier.display_name = _name
""" ghenv.Component.Name = 'HB Glass Modifier 3' ghenv.Component.NickName = 'GlassMod3' ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Glass except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # create the modifier modifier = Glass.from_transmittance(clean_and_id_rad_string(_name), _r_trans, _g_trans, _b_trans, _refract_) modifier.display_name = _name
raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.sensorgrid import SensorGrid except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs from ladybug_rhino.togeometry import to_mesh3d, to_face3d except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # set the default name and process the points to tuples name = clean_and_id_rad_string('SensorGrid') if _name_ is None else _name_ pts = [(pt.X, pt.Y, pt.Z) for pt in _positions] # create the sensor grid object id = clean_rad_string(name) if '/' not in name else clean_rad_string( name.split('/')[0]) if len(_directions_) == 0: grid = SensorGrid.from_planar_positions(id, pts, (0, 0, 1)) else: vecs = [(vec.X, vec.Y, vec.Z) for vec in _directions_] grid = SensorGrid.from_position_and_direction(id, pts, vecs) # set the display name if _name_ is not None: grid.display_name = _name_ if '/' in name:
try: # import the honeybee-radiance dependencies from honeybee_radiance.modifierset import ModifierSet from honeybee_radiance.lib.modifiersets import modifier_set_by_identifier except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # get the base modifier set if base_mod_set_ is None: mod_set = ModifierSet(clean_and_id_rad_string(_name)) else: if isinstance(base_mod_set_, str): base_mod_set_ = modifier_set_by_identifier(base_mod_set_) mod_set = base_mod_set_.duplicate() mod_set.identifier = clean_and_id_rad_string(_name) mod_set.display_name = _name # go through each input modifier subset and assign it to the set if len(_exterior_subset_) != 0: assert len( _exterior_subset_) == 3, 'Input _exterior_subset_ is not valid.' if _exterior_subset_[0] is not None: mod_set.wall_set.exterior_modifier = _exterior_subset_[0] if _exterior_subset_[1] is not None: mod_set.roof_ceiling_set.exterior_modifier = _exterior_subset_[1]
ghenv.Component.Name = 'HB Glass Modifier' ghenv.Component.NickName = 'GlassMod' ghenv.Component.Message = '1.2.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '2' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string, clean_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Glass except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): name = clean_and_id_rad_string('GlassMaterial') if _name_ is None else \ clean_rad_string(_name_) # create the modifier modifier = Glass.from_single_transmittance(name, _trans, _refract_) if _name_ is not None: modifier.display_name = _name_
raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifierset import ModifierSet from honeybee_radiance.lib.modifiersets import modifier_set_by_identifier except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # get the base modifier set name = clean_and_id_rad_string('ModifierSet') if _name_ is None else \ clean_rad_string(_name_) if base_mod_set_ is None: mod_set = ModifierSet(name) else: if isinstance(base_mod_set_, str): base_mod_set_ = modifier_set_by_identifier(base_mod_set_) mod_set = base_mod_set_.duplicate() mod_set.identifier = name if _name_ is not None: mod_set.display_name = _name_ # go through each input modifier subset and assign it to the set if len(_exterior_subset_) != 0: assert len( _exterior_subset_) == 3, 'Input _exterior_subset_ is not valid.'
modifier: An mirror modifier that can be assigned to a Honeybee geometry or Modifier Sets. """ ghenv.Component.Name = 'HB Mirror Modifier 3' ghenv.Component.NickName = 'MirrorMod3' ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = "1 :: Modifiers" ghenv.Component.AdditionalHelpFromDocStrings = '0' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Mirror except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # create the modifier modifier = Mirror(clean_and_id_rad_string(_name), _r_ref, _g_ref, _b_ref) modifier.display_name = _name
try: # import the ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # check and duplicate the input objects group_aps = [] for ap in _apertures: assert isinstance(ap, (Aperture, Door)), 'Expected Aperture or Door ' \ 'for dynamic group. Got {}.'.format(type(ap)) group_aps.append(ap.duplicate()) # set the name of the dynamic group name = clean_and_id_rad_string( 'ApertureGroup') if _name_ is None else clean_rad_string(_name_) for ap in group_aps: ap.properties.radiance.dynamic_group_identifier = name # assign any states if they are connected if len(states_) != 0: # assign states (including shades) to the first aperture group_aps[0].properties.radiance.states = [ state.duplicate() for state in states_ ] # remove shades from following apertures to ensure they aren't double-counted states_wo_shades = [] for state in states_: new_state = state.duplicate() new_state.remove_shades()
or Modifier Sets. """ ghenv.Component.Name = 'HB Mirror Modifier' ghenv.Component.NickName = 'MirrorMod' ghenv.Component.Message = '1.1.0' ghenv.Component.Category = 'HB-Radiance' ghenv.Component.SubCategory = '1 :: Modifiers' ghenv.Component.AdditionalHelpFromDocStrings = '2' try: # import the core honeybee dependencies from honeybee.typing import clean_and_id_rad_string except ImportError as e: raise ImportError('\nFailed to import honeybee:\n\t{}'.format(e)) try: # import the honeybee-radiance dependencies from honeybee_radiance.modifier.material import Mirror except ImportError as e: raise ImportError('\nFailed to import honeybee_radiance:\n\t{}'.format(e)) try: # import ladybug_rhino dependencies from ladybug_rhino.grasshopper import all_required_inputs except ImportError as e: raise ImportError('\nFailed to import ladybug_rhino:\n\t{}'.format(e)) if all_required_inputs(ghenv.Component): # create the modifier modifier = Mirror.from_single_reflectance(clean_and_id_rad_string(_name), _reflect) modifier.display_name = _name