Example #1
0
    def _startUnderlyingMigration(self, startTime):
        if self.hibernating:
            hooks.before_vm_hibernate(self._vm._dom.XMLDesc(0), self._vm.conf)
            try:
                self._vm._vmStats.pause()
                fname = self._vm.cif.prepareVolumePath(self._dst)
                try:
                    self._vm._dom.save(fname)
                finally:
                    self._vm.cif.teardownVolumePath(self._dst)
            except Exception:
                self._vm._vmStats.cont()
                raise
        else:
            for dev in self._vm._customDevices():
                hooks.before_device_migrate_source(dev._deviceXML,
                                                   self._vm.conf, dev.custom)
            hooks.before_vm_migrate_source(self._vm._dom.XMLDesc(0),
                                           self._vm.conf)

            # Do not measure the time spent for creating the VM on the
            # destination. In some cases some expensive operations can cause
            # the migration to get cancelled right after the transfer started.
            destCreateStartTime = time.time()
            result = self._destServer.migrationCreate(self._machineParams)
            destCreationTime = time.time() - destCreateStartTime
            startTime += destCreationTime
            self.log.info('Creation of destination VM took: %d seconds',
                          destCreationTime)

            if result['status']['code']:
                self.status = result
                raise RuntimeError('migration destination error: ' +
                                   result['status']['message'])
            if config.getboolean('vars', 'ssl'):
                transport = 'tls'
            else:
                transport = 'tcp'
            duri = 'qemu+%s://%s/system' % (transport, self.remoteHost)
            if self._vm.conf['_migrationParams']['dstqemu']:
                muri = 'tcp://%s' % \
                       self._vm.conf['_migrationParams']['dstqemu']
            else:
                muri = 'tcp://%s' % self.remoteHost

            self._vm.log.info('starting migration to %s '
                              'with miguri %s', duri, muri)

            downtimeThread = DowntimeThread(self._vm, int(self._downtime))
            self._monitorThread = MonitorThread(self._vm, startTime)
            with utils.running(downtimeThread):
                with utils.running(self._monitorThread):
                    # we need to support python 2.6, so two nested with-s.
                    self._perform_migration(duri, muri)

            self.log.info("migration took %d seconds to complete",
                          (time.time() - startTime) + destCreationTime)
Example #2
0
    def _startUnderlyingMigration(self, startTime):
        if self.hibernating:
            hooks.before_vm_hibernate(self._vm._dom.XMLDesc(0), self._vm.conf)
            try:
                self._vm._vmStats.pause()
                fname = self._vm.cif.prepareVolumePath(self._dst)
                try:
                    self._vm._dom.save(fname)
                finally:
                    self._vm.cif.teardownVolumePath(self._dst)
            except Exception:
                self._vm._vmStats.cont()
                raise
        else:
            for dev in self._vm._customDevices():
                hooks.before_device_migrate_source(
                    dev._deviceXML, self._vm.conf, dev.custom)
            hooks.before_vm_migrate_source(self._vm._dom.XMLDesc(0),
                                           self._vm.conf)

            # Do not measure the time spent for creating the VM on the
            # destination. In some cases some expensive operations can cause
            # the migration to get cancelled right after the transfer started.
            destCreateStartTime = time.time()
            result = self._destServer.migrationCreate(self._machineParams)
            destCreationTime = time.time() - destCreateStartTime
            startTime += destCreationTime
            self.log.info('Creation of destination VM took: %d seconds',
                          destCreationTime)

            if result['status']['code']:
                self.status = result
                raise RuntimeError('migration destination error: ' +
                                   result['status']['message'])
            if config.getboolean('vars', 'ssl'):
                transport = 'tls'
            else:
                transport = 'tcp'
            duri = 'qemu+%s://%s/system' % (transport, self.remoteHost)
            if self._vm.conf['_migrationParams']['dstqemu']:
                muri = 'tcp://%s' % \
                       self._vm.conf['_migrationParams']['dstqemu']
            else:
                muri = 'tcp://%s' % self.remoteHost

            self._vm.log.info('starting migration to %s '
                              'with miguri %s', duri, muri)

            downtimeThread = DowntimeThread(self._vm, int(self._downtime))
            self._monitorThread = MonitorThread(self._vm, startTime)
            with utils.running(downtimeThread):
                with utils.running(self._monitorThread):
                    # we need to support python 2.6, so two nested with-s.
                    self._perform_migration(duri, muri)

            self.log.info("migration took %d seconds to complete",
                          (time.time() - startTime) + destCreationTime)
Example #3
0
    def _startUnderlyingMigration(self, startTime):
        if self.hibernating:
            hooks.before_vm_hibernate(self._vm._dom.XMLDesc(0), self._vm.conf)
            try:
                self._vm._vmStats.pause()
                fname = self._vm.cif.prepareVolumePath(self._dst)
                try:
                    self._vm._dom.save(fname)
                finally:
                    self._vm.cif.teardownVolumePath(self._dst)
            except Exception:
                self._vm._vmStats.cont()
                raise
        else:
            for dev in self._vm._customDevices():
                hooks.before_device_migrate_source(
                    dev._deviceXML, self._vm.conf, dev.custom)
            hooks.before_vm_migrate_source(self._vm._dom.XMLDesc(0),
                                           self._vm.conf)
            response = self.destServer.migrationCreate(self._machineParams)
            if response['status']['code']:
                self.status = response
                raise RuntimeError('migration destination error: ' +
                                   response['status']['message'])
            if config.getboolean('vars', 'ssl'):
                transport = 'tls'
            else:
                transport = 'tcp'
            duri = 'qemu+%s://%s/system' % (transport, self.remoteHost)
            if self._vm.conf['_migrationParams']['dstqemu']:
                muri = 'tcp://%s' % \
                       self._vm.conf['_migrationParams']['dstqemu']
            else:
                muri = 'tcp://%s' % self.remoteHost

            self._vm.log.debug('starting migration to %s '
                               'with miguri %s', duri, muri)

            t = DowntimeThread(self._vm, int(self._downtime))
            self._monitorThread = MonitorThread(self._vm, startTime)
            with utils.running(self._monitorThread):
                try:
                    self._perform_migration(duri, muri)
                finally:
                    t.cancel()
Example #4
0
    def _startUnderlyingMigration(self, startTime):
        if self._mode == 'file':
            hooks.before_vm_hibernate(self._vm._dom.XMLDesc(0), self._vm.conf)
            try:
                self._vm._vmStats.pause()
                fname = self._vm.cif.prepareVolumePath(self._dst)
                try:
                    self._vm._dom.save(fname)
                finally:
                    self._vm.cif.teardownVolumePath(self._dst)
            except Exception:
                self._vm._vmStats.cont()
                raise
        else:
            for dev in self._vm._customDevices():
                hooks.before_device_migrate_source(
                    dev._deviceXML, self._vm.conf, dev.custom)
            hooks.before_vm_migrate_source(self._vm._dom.XMLDesc(0),
                                           self._vm.conf)
            response = self.destServer.migrationCreate(self._machineParams)
            if response['status']['code']:
                self.status = response
                raise RuntimeError('migration destination error: ' +
                                   response['status']['message'])
            if config.getboolean('vars', 'ssl'):
                transport = 'tls'
            else:
                transport = 'tcp'
            duri = 'qemu+%s://%s/system' % (transport, self.remoteHost)
            if self._vm.conf['_migrationParams']['dstqemu']:
                muri = 'tcp://%s' % \
                       self._vm.conf['_migrationParams']['dstqemu']
            else:
                muri = 'tcp://%s' % self.remoteHost

            self._vm.log.debug('starting migration to %s '
                               'with miguri %s', duri, muri)

            t = DowntimeThread(self._vm, int(self._downtime))

            self._monitorThread = MonitorThread(self._vm, startTime)
            self._monitorThread.start()

            try:
                if self._vm.hasSpice and self._vm.conf.get('clientIp'):
                    SPICE_MIGRATION_HANDOVER_TIME = 120
                    self._vm._reviveTicket(SPICE_MIGRATION_HANDOVER_TIME)

                maxBandwidth = config.getint('vars', 'migration_max_bandwidth')
                # FIXME: there still a race here with libvirt,
                # if we call stop() and libvirt migrateToURI2 didn't start
                # we may return migration stop but it will start at libvirt
                # side
                self._preparingMigrationEvt = False
                if not self._migrationCanceledEvt:
                    self._vm._dom.migrateToURI2(
                        duri, muri, None,
                        libvirt.VIR_MIGRATE_LIVE |
                        libvirt.VIR_MIGRATE_PEER2PEER |
                        (libvirt.VIR_MIGRATE_TUNNELLED if
                            self._tunneled else 0) |
                        (libvirt.VIR_MIGRATE_ABORT_ON_ERROR if
                            self._abortOnError else 0),
                        None, maxBandwidth)
                else:
                    self._raiseAbortError()

            finally:
                t.cancel()
                self._monitorThread.stop()
Example #5
0
    def _startUnderlyingMigration(self, startTime):
        if self._mode == 'file':
            hooks.before_vm_hibernate(self._vm._dom.XMLDesc(0), self._vm.conf)
            try:
                self._vm._vmStats.pause()
                fname = self._vm.cif.prepareVolumePath(self._dst)
                try:
                    self._vm._dom.save(fname)
                finally:
                    self._vm.cif.teardownVolumePath(self._dst)
            except Exception:
                self._vm._vmStats.cont()
                raise
        else:
            for dev in self._vm._customDevices():
                hooks.before_device_migrate_source(
                    dev._deviceXML, self._vm.conf, dev.custom)
            hooks.before_vm_migrate_source(self._vm._dom.XMLDesc(0),
                                           self._vm.conf)
            response = self.destServer.migrationCreate(self._machineParams)
            if response['status']['code']:
                self.status = response
                raise RuntimeError('migration destination error: ' +
                                   response['status']['message'])
            if config.getboolean('vars', 'ssl'):
                transport = 'tls'
            else:
                transport = 'tcp'
            duri = 'qemu+%s://%s/system' % (transport, self.remoteHost)
            if self._vm.conf['_migrationParams']['dstqemu']:
                muri = 'tcp://%s' % \
                       self._vm.conf['_migrationParams']['dstqemu']
            else:
                muri = 'tcp://%s' % self.remoteHost

            self._vm.log.debug('starting migration to %s '
                               'with miguri %s', duri, muri)

            t = DowntimeThread(self._vm, int(self._downtime))

            if MonitorThread._MIGRATION_MONITOR_INTERVAL:
                self._monitorThread = MonitorThread(self._vm, startTime)
                self._monitorThread.start()

            try:
                if ('qxl' in self._vm.conf['display'] and
                        self._vm.conf.get('clientIp')):
                    SPICE_MIGRATION_HANDOVER_TIME = 120
                    self._vm._reviveTicket(SPICE_MIGRATION_HANDOVER_TIME)

                maxBandwidth = config.getint('vars', 'migration_max_bandwidth')
                # FIXME: there still a race here with libvirt,
                # if we call stop() and libvirt migrateToURI2 didn't start
                # we may return migration stop but it will start at libvirt
                # side
                self._preparingMigrationEvt = False
                if not self._migrationCanceledEvt:
                    self._vm._dom.migrateToURI2(
                        duri, muri, None,
                        libvirt.VIR_MIGRATE_LIVE |
                        libvirt.VIR_MIGRATE_PEER2PEER |
                        (libvirt.VIR_MIGRATE_TUNNELLED if
                            self._tunneled else 0) |
                        (libvirt.VIR_MIGRATE_ABORT_ON_ERROR if
                            self._abortOnError else 0),
                        None, maxBandwidth)
                else:
                    self._raiseAbortError()

            finally:
                t.cancel()
                if MonitorThread._MIGRATION_MONITOR_INTERVAL:
                    self._monitorThread.stop()