Example #1
0
def gloo_run_elastic(settings, env, command):
    # Make the output directory if it does not exist
    if settings.output_filename:
        _mkdir_p(settings.output_filename)

    rendezvous = RendezvousServer(settings.verbose)
    driver = ElasticDriver(rendezvous,
                           settings.discovery,
                           settings.min_np,
                           settings.max_np,
                           timeout=settings.elastic_timeout,
                           verbose=settings.verbose)

    handler = create_rendezvous_handler(driver)
    global_rendezv_port = rendezvous.start_server(handler)

    # Host-to-host common interface detection requires at least 2 hosts in an elastic job.
    min_hosts = _get_min_start_hosts(settings)
    current_hosts = driver.wait_for_available_slots(settings.num_proc,
                                                    min_hosts=min_hosts)

    nics = driver_service.get_common_interfaces(
        settings, current_hosts.host_assignment_order)
    server_ip = network.get_driver_ip(nics)

    exec_command = _exec_command_fn(settings)
    event = register_shutdown_event()
    run_command = get_run_command(command,
                                  server_ip,
                                  nics,
                                  global_rendezv_port,
                                  elastic=True)
    create_worker = _create_elastic_worker_fn(exec_command, run_command, env,
                                              event)

    driver.start(settings.num_proc, create_worker)
    res = driver.get_results()
    driver.stop()
    rendezvous.stop_server()

    for name, value in sorted(res.items(), key=lambda item: item[1][1]):
        exit_code, timestamp = value
        if exit_code != 0:
            raise RuntimeError(
                'Horovod detected that one or more processes exited with non-zero '
                'status, thus causing the job to be terminated. The first process '
                'to do so was:\nProcess name: {name}\nExit code: {code}\n'.
                format(name=name, code=exit_code))
Example #2
0
def launch_gloo_elastic(command, exec_command, settings, env,
                        get_common_interfaces, rendezvous):
    # Make the output directory if it does not exist
    if settings.output_filename:
        _mkdir_p(settings.output_filename)

    driver = ElasticDriver(rendezvous,
                           settings.discovery,
                           settings.min_np,
                           settings.max_np,
                           timeout=settings.elastic_timeout,
                           reset_limit=settings.reset_limit,
                           verbose=settings.verbose)

    handler = create_rendezvous_handler(driver)
    global_rendezv_port = rendezvous.start(handler)
    driver.wait_for_available_slots(settings.num_proc)

    nics = get_common_interfaces(driver)
    server_ip = network.get_driver_ip(nics)

    event = register_shutdown_event()
    run_command = get_run_command(command,
                                  server_ip,
                                  nics,
                                  global_rendezv_port,
                                  elastic=True)
    create_worker = _create_elastic_worker_fn(exec_command, run_command, env,
                                              event)

    driver.start(settings.num_proc, create_worker)
    res = driver.get_results()
    driver.stop()
    rendezvous.stop()

    if res.error_message is not None:
        raise RuntimeError(res.error_message)

    for name, value in sorted(res.worker_results.items(),
                              key=lambda item: item[1][1]):
        exit_code, timestamp = value
        if exit_code != 0:
            raise RuntimeError(
                'Horovod detected that one or more processes exited with non-zero '
                'status, thus causing the job to be terminated. The first process '
                'to do so was:\nProcess name: {name}\nExit code: {code}\n'.
                format(name=name, code=exit_code))
Example #3
0
 def gloo_run_fn():
     driver_ip = network.get_driver_ip(nics)
     gloo_run(settings, nics, env, driver_ip, command)
Example #4
0
def _run_static(args):
    all_host_names, _ = parse_hosts_and_slots(args.hosts)

    nics_set = set(args.nics.split(',')) if args.nics else None

    # horovodrun has to finish all the checks before this timeout runs out.
    if args.start_timeout:
        start_timeout = args.start_timeout
    else:
        # Lookup default timeout from the environment variable.
        start_timeout = int(os.getenv('HOROVOD_START_TIMEOUT', '30'))

    tmout = timeout.Timeout(start_timeout,
                            message='Timed out waiting for {activity}. Please '
                            'check connectivity between servers. You '
                            'may need to increase the --start-timeout '
                            'parameter if you have too many servers.')
    settings = hvd_settings.Settings(verbose=2 if args.verbose else 0,
                                     ssh_port=args.ssh_port,
                                     extra_mpi_args=args.mpi_args,
                                     tcp_flag=args.tcp_flag,
                                     binding_args=args.binding_args,
                                     key=secret.make_secret_key(),
                                     start_timeout=tmout,
                                     num_proc=args.np,
                                     hosts=args.hosts,
                                     num_hosts=len(all_host_names),
                                     output_filename=args.output_filename,
                                     run_func_mode=args.run_func is not None,
                                     nics=nics_set)

    # This cache stores the results of checks performed by horovod
    # during the initialization step. It can be disabled by setting
    # --disable-cache flag.
    fn_cache = None
    if not args.disable_cache:
        params = ''
        if args.np:
            params += str(args.np) + ' '
        if args.hosts:
            params += str(args.hosts) + ' '
        if args.ssh_port:
            params += str(args.ssh_port)
        parameters_hash = hashlib.md5(params.encode('utf-8')).hexdigest()
        fn_cache = cache.Cache(CACHE_FOLDER, CACHE_STALENESS_THRESHOLD_MINUTES,
                               parameters_hash)

    if settings.verbose >= 2:
        print('Filtering local host names.')
    remote_host_names = network.filter_local_addresses(all_host_names)
    if settings.verbose >= 2:
        print('Remote host found: ' + ' '.join(remote_host_names))

    if len(remote_host_names) > 0:
        if settings.verbose >= 2:
            print('Checking ssh on all remote hosts.')
        # Check if we can ssh into all remote hosts successfully.
        _check_all_hosts_ssh_successful(remote_host_names,
                                        args.ssh_port,
                                        fn_cache=fn_cache)
        if settings.verbose >= 2:
            print('SSH was successful into all the remote hosts.')

    nics = driver_service.get_common_interfaces(settings, all_host_names,
                                                remote_host_names, fn_cache)

    if args.run_func:
        # get the driver IPv4 address
        driver_ip = network.get_driver_ip(nics)
        run_func_server = KVStoreServer(verbose=settings.verbose)
        run_func_server_port = run_func_server.start_server()
        put_data_into_kvstore(driver_ip, run_func_server_port, 'runfunc',
                              'func', args.run_func)

        command = [
            sys.executable, '-m', 'horovod.run.run_task',
            str(driver_ip),
            str(run_func_server_port)
        ]

        try:
            _launch_job(args, settings, nics, command)
            results = [None] * args.np
            # TODO: make it parallel to improve performance
            for i in range(args.np):
                results[i] = read_data_from_kvstore(driver_ip,
                                                    run_func_server_port,
                                                    'runfunc_result', str(i))
            return results
        finally:
            run_func_server.shutdown_server()
    else:
        command = args.command
        _launch_job(args, settings, nics, command)
        return None
    def test_worker_notification_manager(self):
        """Tests that host add events are sent to the worker notification service and consumed."""
        slots = {'host-1': 2}
        discovery = FixedHosts(slots)

        rendezvous = RendezvousServer()
        driver = ElasticDriver(rendezvous, discovery, min_np=2, max_np=4)
        driver.wait_for_available_slots(min_np=2)
        handler = create_rendezvous_handler(driver)

        common_intfs = network.get_local_intfs()
        addr = network.get_driver_ip(common_intfs)
        port = rendezvous.start_server(handler)
        nic = list(common_intfs)[0]

        rank_results = {}

        class NotificationReceiver:
            def __init__(self):
                self.events = []

            def on_hosts_updated(self, timestamp):
                self.events.append(timestamp)

        def add_host():
            slots = {'host-1': 2, 'host-2': 2}
            discovery.set(slots)

        def remove_host():
            slots = {'host-2': 2}
            discovery.set(slots)

        def exec_command(slot_info, events):
            manager = WorkerNotificationManager()
            manager.init(rendezvous_addr=addr,
                         rendezvous_port=port,
                         nic=nic,
                         hostname=slot_info.hostname,
                         local_rank=slot_info.local_rank)

            notification_receiver = NotificationReceiver()
            manager.register_listener(notification_receiver)

            driver.record_ready(slot_info.hostname, slot_info.local_rank)

            if slot_info.rank == 0:
                add_host()
            driver.wait_for_available_slots(4)

            if slot_info.rank == 0:
                remove_host()

            # Busy wait for the number of available slots to decrease
            while driver._host_manager.current_hosts.count_available_slots(
            ) > 2:
                time.sleep(0.01)

            rank_results[slot_info.rank] = notification_receiver.events
            return 0, time.time()

        driver.start(np=2, create_worker_fn=exec_command)
        res = driver.get_results()
        driver.stop()

        assert len(res) == 2
        for name, (exit_code, timestamp) in res.items():
            assert exit_code == 0, name

        assert len(rank_results) == 2
        for rank, timestamps in rank_results.items():
            expected = 2 if rank == 0 else 0
            assert len(timestamps) == expected, rank

        rendezvous.stop_server()