def __init__(self, port="Auto"):
super(BrailleDisplayDriver, self).__init__()
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
tryPorts = ((port, "serial"), )
for port, portType in tryPorts:
try:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
stopbits=serial.STOPBITS_ONE,
parity=serial.PARITY_NONE,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
onReceive=self._onReceive)
except EnvironmentError:
continue
# try to initialize the device and request number of cells
self._dev.write(DESCRIBE_TAG)
self._dev.waitForRead(TIMEOUT)
# Check for cell information
if self.numCells:
# ok, it is a SuperBraille
log.info("Found superBraille device, version %s" %
self.version)
break
else:
self._dev.close()
else:
raise RuntimeError("No SuperBraille found")
def __init__(self, port="Auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self.deviceType = None
self._deviceData = {}
self._awaitingFrameReceipts = {}
self._frameLength = None
self._frame = 0x20
self._frameLock = threading.Lock()
self._hidKeyboardInput = False
self._hidInputBuffer = b""
for portType, portId, port, portInfo in self._getTryPorts(port):
# At this point, a port bound to this display has been found.
# Try talking to the display.
self.isHid = portType == bdDetect.KEY_HID
try:
if self.isHid:
self._dev = hwIo.Hid(
port,
onReceive=self._onReceive,
# Eurobraille wants us not to block other application's access to this handle.
exclusive=False)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
bytesize=serial.EIGHTBITS,
parity=serial.PARITY_EVEN,
stopbits=serial.STOPBITS_ONE,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._onReceive)
except EnvironmentError:
log.debugWarning("Error while connecting to port %r" % port,
exc_info=True)
continue
for i in range(3):
# Request device identification
self._sendPacket(EB_SYSTEM, EB_SYSTEM_IDENTITY)
# Make sure visualisation packets are disabled, as we ignore them anyway.
self._sendPacket(EB_VISU, EB_VISU_DOT, EB_FALSE)
# A device identification results in multiple packets.
# Make sure we've received everything before we continue
while self._dev.waitForRead(self.timeout * 2):
continue
if self.numCells and self.deviceType:
break
if self.numCells and self.deviceType:
# A display responded.
log.info("Found {device} connected via {type} ({port})".format(
device=self.deviceType, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No supported Eurobraille display found")
self.keysDown = defaultdict(int)
self._ignoreCommandKeyReleases = False
def __init__(self, port="Auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._deviceID = None
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
tryPorts = ((port, "serial"), )
for port, portType in tryPorts:
# At this point, a port bound to this display has been found.
# Try talking to the display.
self.isHid = portType == "USB HID"
try:
if self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._onReceive)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
onReceive=self._onReceive)
except EnvironmentError:
continue
if self.isHid:
try:
# It's essential to send protocol on for the Orbit Reader 20.
self._sendRequest(BAUM_PROTOCOL_ONOFF, True)
except EnvironmentError:
# Pronto! and VarioUltra don't support BAUM_PROTOCOL_ONOFF.
pass
# Explicitly request device info.
# Even where it's supported, BAUM_PROTOCOL_ONOFF doesn't always return device info.
self._sendRequest(BAUM_REQUEST_INFO, 0)
else: # Serial
# If the protocol is already on, sending protocol on won't return anything.
# First ensure it's off.
self._sendRequest(BAUM_PROTOCOL_ONOFF, False)
# This will cause the device id, serial number and number of cells to be returned.
self._sendRequest(BAUM_PROTOCOL_ONOFF, True)
# Send again in case the display misses the first one.
self._sendRequest(BAUM_PROTOCOL_ONOFF, True)
for i in xrange(3):
# An expected response hasn't arrived yet, so wait for it.
self._dev.waitForRead(TIMEOUT)
if self.numCells and self._deviceID:
break
if self.numCells:
# A display responded.
log.info("Found {device} connected via {type} ({port})".format(
device=self._deviceID, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No Baum display found")
self._keysDown = {}
self._ignoreKeyReleases = False
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self._serial = None
if port == "auto":
portsToTry = itertools.chain(self._getUSBPorts(),
self._getBluetoothPorts())
elif port == "usb":
portsToTry = self._getUSBPorts()
elif port == "bluetooth":
portsToTry = self._getBluetoothPorts()
else:
portsToTry = (port, )
for port in portsToTry:
log.debug("Checking port %s for a BrailleNote", port)
try:
self._serial = hwIo.Serial(port,
baudrate=BAUD_RATE,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
parity=serial.PARITY_NONE,
onReceive=self._onReceive)
except EnvironmentError:
continue
# Check for cell information
if self._describe():
log.debug("BrailleNote found on %s with %d cells", port,
self.numCells)
break
else:
self._serial.close()
else:
raise RuntimeError("Can't find a braillenote device (port = %s)" %
port)
def __init__(self, port="Auto"):
super(BrailleDisplayDriver, self).__init__()
for portType, portId, port, portInfo in self._getTryPorts(port):
try:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
stopbits=serial.STOPBITS_ONE,
parity=serial.PARITY_NONE,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
onReceive=self._onReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
# try to initialize the device and request number of cells
self._dev.write(DESCRIBE_TAG)
self._dev.waitForRead(TIMEOUT)
# Check for cell information
if self.numCells:
# ok, it is a SuperBraille
log.info("Found superBraille device, version %s" %
self.version)
break
else:
self._dev.close()
else:
raise RuntimeError("No SuperBraille found")
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self._serial = None
for portType, portId, port, portInfo in self._getTryPorts(port):
log.debug("Checking port %s for a BrailleNote", port)
try:
self._serial = hwIo.Serial(port,
baudrate=BAUD_RATE,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
parity=serial.PARITY_NONE,
onReceive=self._onReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
# Check for cell information
if self._describe():
log.debug("BrailleNote found on %s with %d cells", port,
self.numCells)
break
else:
self._serial.close()
else:
raise RuntimeError("Can't find a braillenote device (port = %s)" %
port)
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._model = None
self._ignoreKeyReleases = False
self._keysDown = set()
self.brailleInput = False
self._dotFirmness = 1
self._hidSerialBuffer = b""
self._atc = False
self._sleepcounter = 0
for portType, portId, port, portInfo in self._getTryPorts(port):
# At this point, a port bound to this display has been found.
# Try talking to the display.
self.isHid = portType == bdDetect.KEY_HID
self.isHidSerial = portId in USB_IDS_HID_CONVERTER
self.port = port
try:
if self.isHidSerial:
# This is either the standalone HID adapter cable for older displays,
# or an older display with a HID - serial adapter built in
self._dev = hwIo.Hid(port,
onReceive=self._hidSerialOnReceive)
# Send a flush to open the serial channel
self._dev.write(HT_HID_RPT_InCommand +
HT_HID_CMD_FlushBuffers)
elif self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._serialOnReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
self.sendPacket(HT_PKT_RESET)
for _i in range(3):
# An expected response hasn't arrived yet, so wait for it.
self._dev.waitForRead(self.timeout)
if self.numCells and self._model:
break
if self.numCells:
# A display responded.
self._model.postInit()
log.info("Found {device} connected via {type} ({port})".format(
device=self._model.name, type=portType, port=port))
# Create the message window on the ui thread.
wx.CallAfter(self.create_message_window)
break
self._dev.close()
else:
raise RuntimeError("No Handy Tech display found")
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._model = None
self._ignoreKeyReleases = False
self._keysDown = set()
self.brailleInput = False
self._hidSerialBuffer = b""
self._atc = False
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
tryPorts = ((port, "serial"), )
for port, portType in tryPorts:
# At this point, a port bound to this display has been found.
# Try talking to the display.
self.isHid = portType.startswith("USB HID")
self.isHidSerial = portType == "USB HID serial converter"
try:
if self.isHidSerial:
# This is either the standalone HID adapter cable for older displays,
# or an older display with a HID - serial adapter built in
self._dev = hwIo.Hid(port,
onReceive=self._hidSerialOnReceive)
# Send a flush to open the serial channel
self._dev.write(HT_HID_RPT_InCommand +
HT_HID_CMD_FlushBuffers)
elif self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._serialOnReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
self.sendPacket(HT_PKT_RESET)
for _i in xrange(3):
# An expected response hasn't arrived yet, so wait for it.
self._dev.waitForRead(self.timeout)
if self.numCells and self._model:
break
if self.numCells:
# A display responded.
self._model.postInit()
log.info("Found {device} connected via {type} ({port})".format(
device=self._model.name, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No Handy Tech display found")
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._model = None
for match in self._getTryPorts(port):
portType, portId, port, portInfo = match
self.isBulk = portType == bdDetect.KEY_CUSTOM
# Try talking to the display.
try:
if self.isBulk:
# onReceiveSize based on max packet size according to USB endpoint information.
self._dev = hwIo.Bulk(port,
0,
1,
self._onReceive,
writeSize=0,
onReceiveSize=64)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._onReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
for i in xrange(3):
self._sendCellCountRequest()
# Wait for an expected response.
if self.isBulk:
# Hims Bulk devices sometimes present themselves to the system while not yet ready.
# For example, when switching the connection mode toggle on the Braille EDGE from Bluetooth to USB,
# the USB device is connected but not yet ready.
# Wait ten times the timeout, which is ugly, but effective.
self._dev.waitForRead(self.timeout * 10)
else:
self._dev.waitForRead(self.timeout)
if self.numCells:
break
if not self.numCells:
log.debugWarning("No response from potential Hims display")
self._dev.close()
continue
self._sendIdentificationRequests(match)
if self._model:
# A display responded.
log.info("Found {device} connected via {type} ({port})".format(
device=self._model.name, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No Hims display found")
def __init__(self):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
for portType, port in _getPorts():
self.isHid = portType == "USB HID"
# Try talking to the display.
try:
if self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
onReceive=self._serOnReceive)
except EnvironmentError:
continue
if self.isHid:
data = self._dev.getFeature(HR_CAPS)
self.numCells = ord(data[24])
else:
# This will cause the number of cells to be returned.
self._serSendMessage(MSG_INIT)
# #5406: With the new USB driver, the first command is ignored after a reconnection.
# Send the init message again just in case.
self._serSendMessage(MSG_INIT)
self._dev.waitForRead(TIMEOUT)
if not self.numCells:
# HACK: When connected via bluetooth, the display sometimes reports communication not allowed on the first attempt.
self._serSendMessage(MSG_INIT)
self._dev.waitForRead(TIMEOUT)
if self.numCells:
# A display responded.
log.info(
"Found display with {cells} cells connected via {type} ({port})"
.format(cells=self.numCells, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No display found")
self._keysDown = set()
self._ignoreKeyReleases = False
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._rawKeyboardInput = False
self._deviceId = None
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
tryPorts = ((port, "bluetooth", "ALVA"), )
for port, portType, identifier in tryPorts:
self.isHid = portType == "USB HID"
# Try talking to the display.
try:
if self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
self._deviceId = int(identifier[-2:], 16)
else:
self._dev = hwIo.Serial(port,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._ser6OnReceive)
# Get the device ID
self._ser6SendMessage(b"?", b"?")
for i in xrange(3):
self._dev.waitForRead(self.timeout)
if self._deviceId: # Display responded
break
else: # No response from display
continue
except EnvironmentError:
continue
self._updateSettings()
if self.numCells:
# A display responded.
log.info(
"Found display with {cells} cells connected via {type} ({port})"
.format(cells=self.numCells, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No display found")
self._keysDown = set()
self._ignoreKeyReleases = False
def wake_up(self): if self._sleepcounter > 0: self._sleepcounter -= 1 if self._sleepcounter > 0: # Still not zero after decrementing return # Might throw if device no longer exists. # We leave it to autodetection to grab it when it reappears. if self.isHidSerial: # This is either the standalone HID adapter cable for older displays, # or an older display with a HID - serial adapter built in self._dev = hwIo.Hid(self.port, onReceive=self._hidSerialOnReceive) # Send a flush to open the serial channel self._dev.write(HT_HID_RPT_InCommand + HT_HID_CMD_FlushBuffers) elif self.isHid: self._dev = hwIo.Hid(self.port, onReceive=self._hidOnReceive) else: self._dev = hwIo.Serial(self.port, baudrate=BAUD_RATE, parity=PARITY, timeout=self.timeout, writeTimeout=self.timeout, onReceive=self._serialOnReceive)
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
for portType, portId, port, portInfo in self._getTryPorts(port):
self.isHid = portType == bdDetect.KEY_HID
# Try talking to the display.
try:
if self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=TIMEOUT,
writeTimeout=TIMEOUT,
onReceive=self._serOnReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue # Couldn't connect.
# The Brailliant can fail to init if you try immediately after connecting.
time.sleep(DELAY_AFTER_CONNECT)
# Sometimes, a few attempts are needed to init successfully.
for attempt in xrange(INIT_ATTEMPTS):
if attempt > 0: # Not the first attempt
time.sleep(INIT_RETRY_DELAY) # Delay before next attempt.
self._initAttempt()
if self.numCells:
break # Success!
if self.numCells:
# A display responded.
log.info(
"Found display with {cells} cells connected via {type} ({port})"
.format(cells=self.numCells, type=portType, port=port))
break
# This device can't be initialized. Move on to the next (if any).
self._dev.close()
else:
raise RuntimeError("No display found")
self._keysDown = set()
self._ignoreKeyReleases = False
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._rawKeyboardInput = False
self._deviceId = None
for portType, portId, port, portInfo in self._getTryPorts(port):
self.isHid = portType == bdDetect.KEY_HID
# Try talking to the display.
try:
if self.isHid:
self._dev = hwIo.Hid(port, onReceive=self._hidOnReceive)
self._deviceId = int(portId[-2:], 16)
else:
self._dev = hwIo.Serial(port,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._ser6OnReceive)
# Get the device ID
self._ser6SendMessage(b"?", b"?")
for i in range(3):
self._dev.waitForRead(self.timeout)
if self._deviceId: # Display responded
break
else: # No response from display
continue
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
self._updateSettings()
if self.numCells:
# A display responded.
log.info(
"Found display with {cells} cells connected via {type} ({port})"
.format(cells=self.numCells, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No ALVA display found")
self._keysDown = set()
self._ignoreKeyReleases = False
def __init__(self, port="Auto"):
log.info("BAUM VarioPro Init")
super().__init__()
self.numCells = 0
self._dev = None
self.bp_trans_prev_byte = 0 # BAUM protocol transport layer (ESC dedoubling)
self.mainModule = None
self.statusModule = None
self.telephoneModule = None
self.connected_modules = {}
try:
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
tryPorts = ((port, "serial"), )
for port, portType in tryPorts:
if self._dev:
if self._dev.is_open():
self._dev.close()
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._onReceive)
self.vp_query_modules()
for i in range(10): # wait for dev arrival
self._dev.waitForRead(self.timeout)
if self.numCells:
break
else:
log.error("Device arrival timeout")
except Exception as e:
log.error(e)
raise RuntimeError("No BAUM VarioPro display found")
def __init__(self, port="auto"):
self.numCells = 0
self._ackPending = False
self._pendingCells = []
self._keyBits = 0
self._extendedKeyBits = 0
self._ignoreKeyReleases = False
self._model = None
self._manufacturer = None
self._firmwareVersion = None
self.translationTable = None
self.leftWizWheelActionCycle = itertools.cycle(self.wizWheelActions)
action = self.leftWizWheelActionCycle.next()
self.gestureMap.add("br(freedomScientific):leftWizWheelUp", *action[1])
self.gestureMap.add("br(freedomScientific):leftWizWheelDown", *action[2])
self.rightWizWheelActionCycle = itertools.cycle(self.wizWheelActions)
action = self.rightWizWheelActionCycle.next()
self.gestureMap.add("br(freedomScientific):rightWizWheelUp", *action[1])
self.gestureMap.add("br(freedomScientific):rightWizWheelDown", *action[2])
super(BrailleDisplayDriver, self).__init__()
for portType, portId, port, portInfo in self._getTryPorts(port):
self.isUsb = portType == bdDetect.KEY_CUSTOM
# Try talking to the display.
try:
if self.isUsb:
self._dev = hwIo.Bulk(
port,
epIn=1,
epOut=0,
onReceive=self._onReceive,
writeSize=0,
onReceiveSize=56
)
else:
self._dev = hwIo.Serial(
port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._onReceive
)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
# Send an identification request
self._sendPacket(FS_PKT_QUERY)
for _i in xrange(3):
self._dev.waitForRead(self.timeout)
if self.numCells and self._model:
break
if self.numCells and self._model:
# A display responded.
log.info("Found {device} connected via {type} ({port})".format(
device=self._model, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No Freedom Scientific display found")
self._configureDisplay()
self.gestureMap.add("br(freedomScientific):topRouting1",
"globalCommands", "GlobalCommands", "braille_scrollBack")
self.gestureMap.add("br(freedomScientific):topRouting%d" % self.numCells,
"globalCommands", "GlobalCommands", "braille_scrollForward")
def __init__(self, port="auto"):
super(BrailleDisplayDriver, self).__init__()
self.numCells = 0
self._model = None
if port == "auto":
tryPorts = self._getAutoPorts(
hwPortUtils.listComPorts(onlyAvailable=True))
else:
try:
btName = next(
portInfo.get("bluetoothName", "")
for portInfo in hwPortUtils.listComPorts()
if portInfo.get("port") == port)
btPrefix = next(prefix for prefix in bluetoothPrefixes
if btName.startswith(prefix))
tryPorts = ((port, "bluetooth", btPrefix), )
except StopIteration:
tryPorts = ()
for port, portType, identifier in tryPorts:
self.isBulk = portType == "USB bulk"
# Try talking to the display.
try:
if self.isBulk:
# onReceiveSize based on max packet size according to USB endpoint information.
self._dev = hwIo.Bulk(port,
0,
1,
self._onReceive,
writeSize=0,
onReceiveSize=64)
else:
self._dev = hwIo.Serial(port,
baudrate=BAUD_RATE,
parity=PARITY,
timeout=self.timeout,
writeTimeout=self.timeout,
onReceive=self._onReceive)
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
for i in xrange(3):
self._sendCellCountRequest()
# Wait for an expected response.
if self.isBulk:
# Hims Bulk devices sometimes present themselves to the system while not yet ready.
# For example, when switching the connection mode toggle on the Braille EDGE from Bluetooth to USB,
# the USB device is connected but not yet ready.
# Wait ten times the timeout, which is ugly, but effective.
self._dev.waitForRead(self.timeout * 10)
else:
self._dev.waitForRead(self.timeout)
if self.numCells:
break
if not self.numCells:
log.debugWarning("No response from potential Hims display")
self._dev.close()
continue
if portType == "USB serial":
self._model = SyncBraille()
elif self.isBulk:
self._sendIdentificationRequests(usbId=identifier)
elif portType == "bluetooth" and identifier:
self._sendIdentificationRequests(bluetoothPrefix=identifier)
else:
self._sendIdentificationRequests()
if self._model:
# A display responded.
log.info("Found {device} connected via {type} ({port})".format(
device=self._model.name, type=portType, port=port))
break
self._dev.close()
else:
raise RuntimeError("No Hims display found")
def __init__(self, port: typing.Union[None, str, DeviceMatch]):
super().__init__()
self.numCells = 0
self.numBtns = 0
self.numRoutingKeys = 0
self.handle = None
self._hidBuffer = b""
self._command: typing.Optional[bytes] = None
self._argsLen: typing.Optional[int] = None
log.debug(f"Seika Notetaker braille driver: ({port!r})")
dev: typing.Optional[typing.Union[hwIo.Hid, hwIo.Serial]] = None
for match in self._getTryPorts(port):
self.isHid = match.type == bdDetect.KEY_HID
self.isSerial = match.type == bdDetect.KEY_SERIAL
try:
if self.isHid:
log.info(f"Trying Seika notetaker on USB-HID")
self._dev = dev = hwIo.Hid(
path=match.
port, # for a Hid match type 'port' is actually 'path'.
onReceive=self._onReceiveHID)
dev.setFeature(
SEIKA_HID_FEATURES) # baud rate, stop bit usw
dev.setFeature(SEIKA_CMD_ON) # device on
elif self.isSerial:
log.info(
f"Trying Seika notetaker on Bluetooth (serial) port:{match.port}"
)
self._dev = dev = hwIo.Serial(
port=match.port,
onReceive=self._onReceiveSerial,
baudrate=BAUD,
parity=serial.PARITY_NONE,
bytesize=serial.EIGHTBITS,
stopbits=serial.STOPBITS_ONE,
)
# Note: SEIKA_CMD_ON not sent as per USB-HID, testing from users hasn't indicated any problems.
# The exact purpose of SEIKA_CMD_ON isn't known/documented here.
else:
log.debug(f"Port type not handled: {match.type}")
continue
except EnvironmentError:
log.debugWarning("", exc_info=True)
continue
if self._getDeviceInfo(dev):
break
elif dev:
dev.close()
dev = None
if not dev:
RuntimeError("No MINI-SEIKA display found")
elif self.numCells == 0:
dev.close()
dev = None
raise RuntimeError("No MINI-SEIKA display found, no response")
else:
log.info(f"Seika notetaker,"
f" Cells {self.numCells}"
f" Buttons {self.numBtns}")
