def GET(self):
qdict = web.input()
try:
ddict = json.loads(qdict['data'])
except:
raise web.unauthorized()
force_reboot = False
info = {}
for l in ['wlog', 'elog', 'slog', 'evlog']:
if l in ddict and ddict[l]:
end = ddict['end_date']
days = ddict['days_before']
start_after = ddict['start_after']
prefix = ''
try:
if l in ['slog', 'evlog']:
prefix = 'sensors/' + gv.plugin_data['ld'][int(ddict['ldi'])]['name'] + '/logs/'
except:
pass
records = read_log(prefix+l, end, days, start_after)
info[l] = records
for dlog in ['dlogirricloud', 'dlogirricloud_monitor', 'dlogirricloud_net_config']:
if dlog in ddict and ddict[dlog]:
records = []
try:
with gv.log_lock:
with open('./logs/' + dlog[4:] + '.out', 'r') as file:
records = file.readlines()
except:
pass
info[dlog] = []
for r in records:
info[dlog].append(r)
if 'lrun' in ddict and ddict['lrun']:
info['lrun'] = gv.lrun
if 'programs' in ddict:
if ddict['programs'] == 1:
info['programs'] = gv.pd
else:
gv.pd = ddict['programs']
jsave(gv.pd, 'programs')
info['programs'] = 1
if 'ps' in ddict and ddict['ps']:
info['ps'] = gv.ps
if 'sbits' in ddict and ddict['sbits']:
info['sbits'] = gv.sbits
if 'srvals' in ddict and ddict['srvals']:
info['srvals'] = gv.srvals
if 'sensors' in ddict and 'ld' in gv.plugin_data:
if ddict['sensors'] == 1:
info['sensors'] = []
try:
if 'ldi' not in ddict or int(ddict['ldi']) == -1:
info['sensors'] = gv.plugin_data['ld']
else:
info['sensors'] = gv.plugin_data['ld'][int(ddict['ldi'])]
except:
pass
info['sensboards'] = i2c.get_vsb_boards().keys()
info['remotesensboards'] = get_remote_sensor_boards()
else:
try:
if 'ldi' not in ddict or int(ddict['ldi']) == -1:
gv.plugin_data['ld'] = ddict['sensors']
else:
gv.plugin_data['ld'][int(ddict['ldi'])] = ddict['sensors']
except:
gv.plugin_data['ld'] = ddict['sensors']
jsave(gv.plugin_data['ld'], 'sensors')
info['sensors'] = 1
if 'camera' in ddict and 'ca' in gv.plugin_data:
if ddict['camera'] == 1:
info['camera'] = gv.plugin_data['ca']
if 'cai' in ddict and ddict['cai']:
info['cai'] = ''
if gv.plugin_data['ca']['enable_camera'] == 'on':
try:
with open('./static/images/camera.jpg', mode='rb') as file: # b is important -> binary
info['cai'] = base64.b64encode(file.read())
except:
pass
else:
gv.plugin_data['ca'] = ddict['camera']
jsave(gv.plugin_data['ca'], 'camera')
info['camera'] = 1
if 'sd' in ddict:
if ddict['sd'] == 1:
sd = gv.sd.copy()
del sd['substation_network']
del sd['salt']
del sd['password']
del sd['pwd']
del sd['enable_upnp'] # stuff from base configuration stays as was
del sd['subnet_only_substations']
del sd['external_proxy_port']
kill_keys = []
for k,v in sd.iteritems():
if len(k) > 2 and (k[0:2] == 'te' or k[0:2] == 'et'):
kill_keys.append(k)
for k in kill_keys:
del sd[k] # dont send textemail or et_weather stuff
info['sd'] = sd
else:
for field in ddict['sd']:
gv.sd[field] = ddict['sd'][field]
update_hostname(gv.sd['name'])
update_tza(gv.sd['tza'])
jsave(gv.sd, 'sd')
info['sd'] = 1
force_reboot = True
if 'snames' in ddict:
if ddict['snames'] == 1:
info['snames'] = gv.snames
else:
gv.snames = ddict['snames']
jsave(gv.snames, 'snames')
info['snames'] = 1
if 'snotes' in ddict:
if ddict['snotes'] == 1:
info['snotes'] = gv.snotes
else:
gv.snotes = ddict['snotes']
jsave(gv.snotes, 'snotes')
info['snotes'] = 1
if 'update_status' in ddict and ddict['update_status']:
updatechecker.update_rev_data()
info['update_status'] = updatechecker.status
web.header('Content-Type', 'application/json')
ret_str = json.dumps(info)
if force_reboot:
reboot(5) # give a few seconds to reply
return ret_str
def timing_loop():
""" ***** Main timing algorithm. Runs in a separate thread.***** """
last_min = 0
zc = 0
supply_temp_readings = []
return_temp_readings = []
# last_mode = gv.sd['mode']
last_mode = 'Invalid Mode' # force intialization
last_temp_log = 0
failed_temp_read = 0
last_dewpoint_adjust = 0
# Log the image and all the vsb board fw
try:
with open('data/version', 'r') as f:
image_version = f.read()
gv.logger.info('Image version: ' + image_version)
except:
pass
boards = i2c.get_vsb_boards()
for board, version in boards.items():
gv.logger.info('VSB Firmware for board: ' + str(board) + ' value: ' + hex(version))
for delay in range(15):
time.sleep(1) # wait for ip addressing to settle but keep updating time
gv.nowt = time.localtime() # Current time as time struct. Updated once per second.
gv.now = timegm(gv.nowt) # Current time as timestamp based on local time from the Pi. Updated once per second.
start_time = gv.now
check_and_update_upnp()
last_upnp_refresh = gv.now
# one_way_cooling_adjustments tracks the direction of the last valve change and how many changes we have made
# in that direction without going the other direction. This stops us from constantly moving the valve when the
# heatpump is off or we cannot achieve our target.
one_way_cooling_adjustments = 0
last_ave_supply_temp = None
# force everything off
set_output()
while True: # infinite loop
time.sleep(1)
gv.nowt = time.localtime() # Current time as time struct. Updated once per second.
gv.now = timegm(gv.nowt) # Current time as timestamp based on local time from the Pi. Updated once per second.
# perform once per minute processing
if gv.now // 60 != last_min: # only check programs once a minute
last_min = gv.now // 60
update_radio_present()
max_bd = -1
boards = i2c.get_vsb_boards()
for bd, version in boards.items():
if bd not in gv.in_bootloader:
try:
max_bd = max(max_bd, bd)
v = i2c_read(i2c.ADDRESS+bd, 0xc) # verify scratch value is as expected. Acts as a touch of the vsb too!
if v != bd+16:
gv.logger.critical('Main bad scratch value on board: ' + str(bd) + ' value: ' + str(v))
i2c_write(i2c.ADDRESS+bd, 0xc, bd+16) # write scratch register as keepalive
except:
gv.logger.critical('Cant access scratch register on board: ' + str(bd))
pass
# read deadman debug register ignoring all errors.
try:
v = i2c_read(i2c.ADDRESS+bd, 0xd)
if v != 0:
gv.logger.critical('Deadman register triggered on board: ' + str(bd) + ' value: ' + str(v))
except:
pass
cur_bd = (gv.sd['nst']-gv.sd['radiost'])//8
if max_bd+1 > cur_bd: # ensure at nbrd captures all attached VSMs
gv.logger.info('Changing nbrd based on attached boards: ' + str(max_bd+1))
adjust_gv_nbrd(max_bd+1)
gv.sd['nst'] += 8*(max_bd+1-cur_bd)
jsave(gv.sd, 'sd')
cur_ip = get_ip()
ext_ip_addr = get_external_ip()
if gv.sd['master'] and (ext_ip_addr != gv.external_ip or cur_ip != gv.last_ip):
gv.external_ip = ext_ip_addr
try:
# send email if ip addressing changed
if gv.sd['teipchange'] and gv.plugin_data['te']['tesender']:
subject = "Report from Irricloud"
body = 'IP change. Local IP: ' + cur_ip
if gv.sd['htp'] != 0 and gv.sd['htp'] != 80:
body += ':' + str(gv.sd['htp'])
body += ' External IP: ' + ext_ip_addr
if gv.sd['external_htp'] != 0:
body += ':' + str(gv.sd['external_htp'])
gv.plugin_data['te']['tesender'].try_mail(subject, body)
except:
pass
if cur_ip != gv.last_ip:
gv.logger.info('IP changed from: ' + gv.last_ip + ' to: ' + cur_ip)
gv.last_ip = cur_ip
if cur_ip != "No IP Settings":
# find router, set up upnp port mapping
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
if gv.sd['upnp_refresh_rate'] > 0 and \
(gv.now-last_upnp_refresh)//60 >= gv.sd['upnp_refresh_rate']:
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
process_actions()
last_zc = zc
zc = read_sensor_value('zone_call')
if zc == None:
zc = last_zc
log_event('Failed to read zone_call')
boiler_md = get_boiler_mode()
heatpump_md = get_heatpump_mode()
if gv.sd['mode'] != last_mode: # turn everything off
log_event('change mode. Turn off boiler, heatpump, circ_pump')
if boiler_md != 'none':
set_boiler_mode('none')
if heatpump_md != 'none':
set_heatpump_mode('none')
gv.srvals[circ_pump] = 0
set_output()
last_zc = 0 # mark as was off
last_mode = gv.sd['mode']
remove_action({'what':'set_valve_change'})
if gv.sd['mode'] in ['Heatpump Cooling'] or \
(gv.sd['mode'] in ['Boiler Only'] and not boiler_through_buffer_tank): # use only return water
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':-100})
else:
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':100})
try:
temps = read_temps()
failed_temp_read = 0
# rather than tracking serial # of thermistors, just assume higher readings are supply
# and cooler readings are return (if heating) and vice versa if cooling
min_temp = min(temps)
max_temp = max(temps)
if min_temp < 0 or max_temp < 0:
log_event('Bad min/max temps. min: ' + str(min_temp) + ' max: ' + str(max_temp))
if gv.sd['mode'] == 'Heatpump Cooling':
supply_temp_readings.append(min_temp)
return_temp_readings.append(max_temp)
else:
supply_temp_readings.append(max_temp)
return_temp_readings.append(min_temp)
except:
if gv.now - start_time > 120: # let things start up before capturing errors
failed_temp_read += 1
if failed_temp_read < 300:
if failed_temp_read % 10 == 1: # first exception should get cleared by reconnect and is normal
log_event('cant read temperatures. Failcount: ' + str(failed_temp_read))
elif failed_temp_read == 300:
log_event('TEMPERATURE SENSOR FAILURE')
email('Heating', 'TEMPERATURE SENSOR FAILURE')
elif failed_temp_read % 300 == 0:
log_event('Ongoing temp failure. Failcount: ' + str(failed_temp_read))
if len(supply_temp_readings) > 5:
supply_temp_readings.pop(0)
if len(return_temp_readings) > 5:
return_temp_readings.pop(0)
try:
ave_supply_temp = sum(supply_temp_readings)/float(len(supply_temp_readings))
if ave_supply_temp < 0:
log_event('Bad ave_supply_temp: ' + str(ave_supply_temp))
except ZeroDivisionError:
ave_supply_temp = -1
try:
ave_return_temp = sum(return_temp_readings)/float(len(return_temp_readings))
if ave_return_temp < 0:
log_event('Bad ave_return_temp: ' + str(ave_return_temp))
except ZeroDivisionError:
ave_return_temp = -1
if gv.now - last_temp_log >= 600:
last_temp_log = gv.now
ast_c = ave_supply_temp
ast_f = ast_c*1.8 + 32
art_c = ave_return_temp
art_f = art_c*1.8 + 32
dew_f = dew*1.8 + 32
log_event('supply temp: ' + "{0:.2f}".format(ast_c) + 'C ' + "{0:.2f}".format(ast_f) + 'F' + '; ' + \
'return temp: ' + "{0:.2f}".format(art_c) + 'C ' + "{0:.2f}".format(art_f) + 'F' + '; ' + \
'dewpoint: ' + "{0:.2f}".format(dew) + 'C ' + "{0:.2f}".format(dew_f) + 'F')
if zc != last_zc: # change in zone call
if gv.sd['mode'] == 'None':
zc = last_zc # dont do anything in terms of moving water
elif last_zc == 0: # was off, now on?
supply_temp_readings = []
return_temp_readings = []
last_ave_supply_temp = None
log_event('zone call on; enable circ pump')
gv.srvals[circ_pump] = 1
set_output()
# for cooling or boiler operation start with only return water. For heating, only buffer tank water
if gv.sd['mode'] in ['Heatpump Cooling']:
remove_action({'what':'set_valve_change'})
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':-100})
one_way_cooling_adjustments = 0
elif not boiler_through_buffer_tank:
remove_action({'what':'set_valve_change'})
if gv.sd['mode'] in ['Boiler Only']:
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':-100})
else:
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':100})
if gv.sd['mode'] in ['Boiler Only', 'Boiler and Heatpump']:
log_event('zone call on; enable boiler')
set_boiler_mode('heating')
else: # was on, now off
msg_start = 'zone call off; '
gv.srvals[circ_pump] = 0
set_output()
if boiler_md == 'heating' and \
gv.sd['mode'] in ['Boiler Only', 'Boiler and Heatpump', 'Heatpump then Boiler']:
msg_start += 'disable boiler; '
set_boiler_mode('none')
if heatpump_md == 'heating' and \
gv.sd['mode'] in ['Boiler and Heatpump', 'Heatpump then Boiler', 'Heatpump Only']:
msg_start += 'disable heatpump; '
set_heatpump_mode('none')
if heatpump_md == 'cooling' and gv.sd['mode'] == 'Heatpump Cooling':
msg_start += 'disable heatpump; '
set_heatpump_mode('none')
log_event(msg_start + 'supply: ' + "{0:.2f}".format(ave_supply_temp) + ' return: ' + "{0:.2f}".format(ave_return_temp))
elif zc == 1: # still on?
if len(supply_temp_readings) < 5 or len(return_temp_readings) < 5:
continue
if gv.sd['mode'] in ['Heatpump Only', 'Boiler and Heatpump', 'Heatpump then Boiler']:
if ave_supply_temp < heatpump_setpoint_h-5:
if heatpump_md == 'none' and gv.now-last_heatpump_off > 3*60:
# log_event('reenable heatpump; supply: ' + str(ave_supply_temp))
set_heatpump_mode('heating')
if ave_supply_temp > heatpump_setpoint_h-2:
if heatpump_md == 'heating' and gv.now-last_heatpump_on > 3*60:
# log_event('disable heatpump; supply: ' + str(ave_supply_temp))
set_heatpump_mode('none')
if gv.sd['mode'] == 'Heatpump then Boiler':
if ave_supply_temp < heatpump_setpoint_h-13 or ave_return_temp < 33:
if boiler_md == 'none' and gv.now-last_boiler_off > 2*60 and \
gv.now-last_heatpump_on > 3*60:
log_event('reenable boiler; supply: ' + "{0:.2f}".format(ave_supply_temp) + ' return: ' + "{0:.2f}".format(ave_return_temp))
# Use only boiler for a while
if not boiler_through_buffer_tank:
remove_action({'what':'set_valve_change'})
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':-100})
set_heatpump_mode('none')
set_boiler_mode('heating')
insert_action(gv.now+45*60, {'what':'set_boiler_mode', 'mode':'none'})
if gv.sd['mode'] == 'Heatpump Cooling' and gv.now-last_dewpoint_adjust >= 60:
dewpoint_margin = 1.5
target = max(dew+dewpoint_margin+1, 10.)
adjust = 0
if ave_supply_temp <= dew+dewpoint_margin and one_way_cooling_adjustments > min_cooling_adjustments:
remove_action({'what':'set_valve_change'})
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':-100})
msg = 'Close valve; avoid condensation'
log_event(msg + ': ' + "{0:.2f}".format(dew) + 'C target: ' + "{0:.2f}".format(target) + 'C supply: ' + "{0:.2f}".format(ave_supply_temp) + 'C')
last_dewpoint_adjust = gv.now
last_ave_supply_temp = None
one_way_cooling_adjustments = min_cooling_adjustments
elif target < ave_supply_temp - .1:
remove_action({'what':'set_valve_change'})
adjust = 0
if one_way_cooling_adjustments < 0:
one_way_cooling_adjustments = 0
adjust += 2
adjust += cooling_adjust_per_degree * (ave_supply_temp - target)
if last_ave_supply_temp != None and last_ave_supply_temp - ave_supply_temp > 0 and \
gv.now-last_dewpoint_adjust <= 180: # already going down? Be patient
new_adjust = adjust - 2*cooling_adjust_per_degree * (last_ave_supply_temp - ave_supply_temp)
msg = 'already going down'
gv.logger.debug(msg + ': ' + \
' adjust: ' + "{0:.2f}".format(adjust) + \
' new_adjust: ' + "{0:.2f}".format(new_adjust))
adjust = max(0, new_adjust)
adjust = int(round(adjust))
msg = 'Ignoring request for more buffer tank water'
if adjust > 0 and one_way_cooling_adjustments < max_cooling_adjustments:
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':adjust})
last_dewpoint_adjust = gv.now
last_ave_supply_temp = ave_supply_temp
msg = 'More buffer tank water'
elif target > ave_supply_temp + .1:
remove_action({'what':'set_valve_change'})
adjust = 0
if one_way_cooling_adjustments > 0:
one_way_cooling_adjustments = 0
adjust -= 2
adjust += cooling_adjust_per_degree * (ave_supply_temp - target)
if last_ave_supply_temp != None and last_ave_supply_temp - ave_supply_temp < 0 and \
gv.now-last_dewpoint_adjust <= 180: # already going up? Be patient
new_adjust = adjust - 2*cooling_adjust_per_degree * (last_ave_supply_temp - ave_supply_temp)
msg = 'already going up'
gv.logger.debug(msg + ': ' + \
' adjust: ' + "{0:.2f}".format(adjust) + \
' new_adjust: ' + "{0:.2f}".format(new_adjust))
adjust = min(0, new_adjust)
adjust = int(round(adjust))
msg = 'Ignoring request for more return water'
if adjust < 0 and one_way_cooling_adjustments > min_cooling_adjustments:
insert_action(gv.now, {'what':'set_valve_change', 'valve_change_percent':adjust})
last_dewpoint_adjust = gv.now
last_ave_supply_temp = ave_supply_temp
msg = 'More return water'
else:
msg = 'Not changing valve'
gv.logger.debug(msg + ': ' + str(one_way_cooling_adjustments) + \
' dew: ' + "{0:.2f}".format(dew) + 'C' + \
' target: ' + "{0:.2f}".format(target) + 'C' + \
' supply: ' + "{0:.2f}".format(ave_supply_temp) + 'C')
if (adjust > 0 and one_way_cooling_adjustments < max_cooling_adjustments) or \
(adjust < 0 and one_way_cooling_adjustments > min_cooling_adjustments):
one_way_cooling_adjustments += adjust
def check_factory_reset():
"""Check every five seconds to see if we need to do a factory reset"""
while True:
time.sleep(5)
try:
factory_reset = False
i2c_reset = False
try:
# if factory_reset file is present or hw button is pushed.
if pi.read(button_pin) == 0:
factory_reset = True
logger.warning('button factory reset')
else:
try:
with open('data/factory_reset', 'r') as f:
factory_reset = True
logger.warning('file factory reset')
if factory_reset:
subprocess.call(['rm', 'data/factory_reset'])
except:
pass
except Exception as ex:
logger.warning('button read failure: ' + str(ex))
print 'checking factory reset', factory_reset
if factory_reset:
# Factory reset request
logger.warning('factory reset')
light_vsb_boards()
try:
type = ''
usbs = subprocess.check_output(['lsusb'])
usbl = usbs.split('\n')
for usb in usbl:
if 'Ralink Technology' in usb:
type = 'CanaKit' if type == '' else 'Unknown'
elif 'Realtek Semiconductor' in usb:
type = 'TP' if type == '' else 'Unknown'
if type != '' and type != 'Unknown':
for file in [
'/etc/hostapd/hostapd.conf',
'/usr/sbin/hostapd',
'/etc/wpa_supplicant/functions.sh'
]:
rc = subprocess.call(
['diff', file, file + '-' + type])
if rc == 0:
logger.debug(file + ' and ' + file + '-' +
type + ' match')
else:
logger.critical('Rebinding ' + file +
' to match ' + file + '-' +
type)
subprocess.call(['rm', file])
subprocess.call(
['ln', '-s', file + '-' + type, file])
else:
logger.info(
'leaving hostapd and wpa_supplicant unchanged. type: '
+ type)
except Exception as ex:
logger.exception(
'Could not validate/change hostapd and wpa_supplicant usage: '
+ str(ex))
logger.info(
'restoring orig /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf'
)
shutil.copy2('/etc/network/interfaces.orig',
'/etc/network/interfaces')
shutil.copy2('/etc/wpa_supplicant/wpa_supplicant.conf.orig',
'/etc/wpa_supplicant/wpa_supplicant.conf')
shutil.copy2('/etc/dhcpcd.conf.orig', '/etc/dhcpcd.conf')
logger.info('starting sip_net_start')
rc = subprocess.call(
['/usr/bin/python',
'/home/pi/Irricloud/sip_net_start.py']) # leads to reboot
logger.debug('sip_net_start rc: ' + str(rc))
time.sleep(10)
else:
try:
with open('data/i2c_reset', 'r') as f:
i2c_reset = True
logger.warning('file i2c_reset')
if i2c_reset:
subprocess.call(['rm', 'data/i2c_reset'])
except:
pass
print 'checking i2c reset', i2c_reset
if i2c_reset:
# Factory reset request
boards = i2c.get_vsb_boards()
for board, version in boards.items():
if board not in gv.in_bootloader:
logger.warning('i2c reset board: ' +
str(board + 1))
i2c.i2c_reset(i2c.ADDRESS + board)
else:
logger.critical('i2c reset aborted board: ' +
str(board + 1) +
' in bootloader version: ' +
hex(version))
logger.info('reboot.')
reboot(0, True)
except Exception as ex:
logger.critical('check_factory_reset exception: ' + str(ex))
def timing_loop():
""" ***** Main timing algorithm. Runs in a separate thread.***** """
last_min = 0
zc = 0
supply_temp_readings = []
return_temp_readings = []
# last_mode = gv.sd['mode']
last_mode = 'Invalid Mode' # force intialization
last_temp_log = 0
failed_temp_read = 0
failed_cold_supply = 0
last_dewpoint_adjust = 0
# Log the image and all the vsb board fw
try:
with open('data/version', 'r') as f:
image_version = f.read()
gv.logger.info('Image version: ' + image_version)
except:
pass
boards = i2c.get_vsb_boards()
for board, version in boards.items():
gv.logger.info('VSB Firmware for board: ' + str(board) + ' value: ' +
hex(version))
for delay in range(15):
time.sleep(
1) # wait for ip addressing to settle but keep updating time
gv.nowt = time.localtime(
) # Current time as time struct. Updated once per second.
gv.now = timegm(
gv.nowt
) # Current time as timestamp based on local time from the Pi. Updated once per second.
start_time = gv.now
check_and_update_upnp()
last_upnp_refresh = gv.now
# one_way_cooling_adjustments tracks the direction of the last valve change and how many changes we have made
# in that direction without going the other direction. This stops us from constantly moving the valve when the
# heatpump is off or we cannot achieve our target.
one_way_cooling_adjustments = 0
last_ave_supply_temp = None
# force everything off
set_output()
while True: # infinite loop
try:
time.sleep(1)
gv.nowt = time.localtime(
) # Current time as time struct. Updated once per second.
gv.now = timegm(
gv.nowt
) # Current time as timestamp based on local time from the Pi. Updated once per second.
# perform once per minute processing
if gv.now // 60 != last_min: # only check programs once a minute
boiler_supply_crossover = gv.sd['boiler_supply_temp'] if gv.sd[
'tu'] == 'C' else (gv.sd['boiler_supply_temp'] - 32) / 1.8
last_min = gv.now // 60
update_radio_present()
max_bd = -1
boards = i2c.get_vsb_boards()
for bd, version in boards.items():
if bd not in gv.in_bootloader:
try:
max_bd = max(max_bd, bd)
v = i2c_read(
i2c.ADDRESS + bd, 0xc
) # verify scratch value is as expected. Acts as a touch of the vsb too!
if v != bd + 16:
gv.logger.critical(
'Main bad scratch value on board: ' +
str(bd) + ' value: ' + str(v))
i2c_write(
i2c.ADDRESS + bd, 0xc, bd +
16) # write scratch register as keepalive
except:
gv.logger.critical(
'Cant access scratch register on board: ' +
str(bd))
pass
# read deadman debug register ignoring all errors.
try:
v = i2c_read(i2c.ADDRESS + bd, 0xd)
if v != 0:
gv.logger.critical(
'Deadman register triggered on board: ' +
str(bd) + ' value: ' + str(v))
except:
pass
cur_bd = (gv.sd['nst'] - gv.sd['radiost']) // 8
if max_bd + 1 > cur_bd: # ensure at nbrd captures all attached VSMs
gv.logger.info('Changing nbrd based on attached boards: ' +
str(max_bd + 1))
adjust_gv_nbrd(max_bd + 1)
gv.sd['nst'] += 8 * (max_bd + 1 - cur_bd)
jsave(gv.sd, 'sd')
cur_ip = get_ip()
ext_ip_addr = get_external_ip()
if gv.sd['master'] and (ext_ip_addr != gv.external_ip
or cur_ip != gv.last_ip):
gv.external_ip = ext_ip_addr
try:
# send email if ip addressing changed
if gv.sd['teipchange'] and gv.plugin_data['te'][
'tesender']:
subject = "Report from Irricloud"
body = 'IP change. Local IP: ' + cur_ip
if gv.sd['htp'] != 0 and gv.sd['htp'] != 80:
body += ':' + str(gv.sd['htp'])
body += ' External IP: ' + ext_ip_addr
if gv.sd['external_htp'] != 0:
body += ':' + str(gv.sd['external_htp'])
gv.plugin_data['te']['tesender'].try_mail(
subject, body)
except:
log_event('ip change email send failed')
if cur_ip != gv.last_ip:
gv.logger.info('IP changed from: ' + gv.last_ip + ' to: ' +
cur_ip)
gv.last_ip = cur_ip
if cur_ip != "No IP Settings":
# find router, set up upnp port mapping
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
if gv.sd['upnp_refresh_rate'] > 0 and \
(gv.now-last_upnp_refresh)//60 >= gv.sd['upnp_refresh_rate']:
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
if gv.now % 60 == 0:
gv.logger.info('timing_loop 0')
process_actions()
last_zc = zc
zc = read_sensor_value('zone_call')
if zc == None:
zc = last_zc
log_event('Failed to read zone_call')
boiler_md = get_boiler_mode()
heatpump_md = get_heatpump_mode()
if gv.sd['mode'] != last_mode: # turn everything off
log_event('change mode. Turn off boiler, heatpump, circ_pump')
if boiler_md != 'none':
set_boiler_mode('none')
if heatpump_md != 'none':
set_heatpump_mode('none')
gv.srvals[circ_pump] = 0
set_output()
last_zc = 0 # mark as was off
last_mode = gv.sd['mode']
remove_action({'what': 'set_valve_change'})
if gv.sd['mode'] in ['Heatpump Cooling'] or \
(gv.sd['mode'] in ['Boiler Only'] and not boiler_through_buffer_tank): # use only return water
insert_action(gv.now, {
'what': 'set_valve_change',
'valve_change_percent': -100
})
else:
insert_action(gv.now, {
'what': 'set_valve_change',
'valve_change_percent': 100
})
try:
temps = read_temps()
failed_temp_read = 0
# rather than tracking serial # of thermistors, just assume higher readings are supply
# and cooler readings are return (if heating) and vice versa if cooling
min_temp = min(temps)
max_temp = max(temps)
if min_temp < 0 or max_temp < 0:
log_event('Bad min/max temps. min: ' + str(min_temp) +
' max: ' + str(max_temp))
if gv.sd['mode'] == 'Heatpump Cooling':
supply_temp_readings.append(min_temp)
return_temp_readings.append(max_temp)
else:
supply_temp_readings.append(max_temp)
return_temp_readings.append(min_temp)
except:
if gv.now - start_time > 120: # let things start up before capturing errors
failed_temp_read += 1
if failed_temp_read < 300:
if failed_temp_read % 10 == 1: # first exception should get cleared by reconnect and is normal
log_event('cant read temperatures. Failcount: ' +
str(failed_temp_read))
elif failed_temp_read == 300:
log_event('TEMPERATURE SENSOR FAILURE')
try:
gv.plugin_data['te']['tesender'].try_mail(
'Heating', 'TEMPERATURE SENSOR FAILURE')
except:
log_event('temp sensor failure email send failed')
elif failed_temp_read % 300 == 0:
log_event('Ongoing temp failure. Failcount: ' +
str(failed_temp_read))
if len(supply_temp_readings) > 5:
supply_temp_readings.pop(0)
if len(return_temp_readings) > 5:
return_temp_readings.pop(0)
try:
ave_supply_temp = sum(supply_temp_readings) / float(
len(supply_temp_readings))
if ave_supply_temp < 0:
log_event('Bad ave_supply_temp: ' + str(ave_supply_temp))
except ZeroDivisionError:
ave_supply_temp = -1
try:
ave_return_temp = sum(return_temp_readings) / float(
len(return_temp_readings))
if ave_return_temp < 0:
log_event('Bad ave_return_temp: ' + str(ave_return_temp))
except ZeroDivisionError:
ave_return_temp = -1
if gv.now - last_temp_log >= 600:
last_temp_log = gv.now
ast_c = ave_supply_temp
ast_f = ast_c * 1.8 + 32
art_c = ave_return_temp
art_f = art_c * 1.8 + 32
dew_f = dew * 1.8 + 32
log_event('supply temp: ' + "{0:.2f}".format(ast_c) + 'C ' + "{0:.2f}".format(ast_f) + 'F' + '; ' + \
'return temp: ' + "{0:.2f}".format(art_c) + 'C ' + "{0:.2f}".format(art_f) + 'F' + '; ' + \
'dewpoint: ' + "{0:.2f}".format(dew) + 'C ' + "{0:.2f}".format(dew_f) + 'F')
if zc != last_zc: # change in zone call
if gv.sd['mode'] == 'None':
zc = last_zc # dont do anything in terms of moving water
elif last_zc == 0: # was off, now on?
supply_temp_readings = []
return_temp_readings = []
last_ave_supply_temp = None
low_supply_count = 0
log_event('zone call on; enable circ pump')
gv.srvals[circ_pump] = 1
set_output()
# for cooling or boiler operation start with only return water. For heating, only buffer tank water
if gv.sd['mode'] in ['Heatpump Cooling']:
remove_action({'what': 'set_valve_change'})
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': -100
})
one_way_cooling_adjustments = 0
elif not boiler_through_buffer_tank:
remove_action({'what': 'set_valve_change'})
if gv.sd['mode'] in ['Boiler Only']:
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': -100
})
else:
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': 100
})
if gv.sd['mode'] in ['Boiler Only', 'Boiler and Heatpump']:
log_event('zone call on; enable boiler')
set_boiler_mode('heating')
else: # was on, now off
msg_start = 'zone call off; '
gv.srvals[circ_pump] = 0
set_output()
if boiler_md == 'heating' and \
gv.sd['mode'] in ['Boiler Only', 'Boiler and Heatpump', 'Heatpump then Boiler']:
msg_start += 'disable boiler; '
set_boiler_mode('none')
if heatpump_md == 'heating' and \
gv.sd['mode'] in ['Boiler and Heatpump', 'Heatpump then Boiler', 'Heatpump Only']:
msg_start += 'disable heatpump; '
set_heatpump_mode('none')
if heatpump_md == 'cooling' and gv.sd[
'mode'] == 'Heatpump Cooling':
msg_start += 'disable heatpump; '
set_heatpump_mode('none')
log_event(msg_start + 'supply: ' +
"{0:.2f}".format(ave_supply_temp) + ' return: ' +
"{0:.2f}".format(ave_return_temp))
elif zc == 1: # still on?
if len(supply_temp_readings) < 5 or len(
return_temp_readings) < 5:
continue
if gv.sd['mode'] in [
'Heatpump Only', 'Boiler and Heatpump',
'Heatpump then Boiler'
]:
if ave_supply_temp < heatpump_setpoint_h - 8:
if heatpump_md == 'none' and gv.now - last_heatpump_off > 3 * 60:
# log_event('reenable heatpump; supply: ' + str(ave_supply_temp))
set_heatpump_mode('heating')
if ave_supply_temp > heatpump_setpoint_h - 4:
if heatpump_md == 'heating' and gv.now - last_heatpump_on > 3 * 60:
# log_event('disable heatpump; supply: ' + str(ave_supply_temp))
set_heatpump_mode('none')
if gv.sd['mode'] == 'Heatpump then Boiler':
# if ave_supply_temp < heatpump_setpoint_h-13 or ave_return_temp < 32:
if ave_supply_temp < boiler_supply_crossover:
if low_supply_count <= 750: # about 12.5 mins.
# Typically takes 300-450 seconds from low point to reach ok, and once starts trending up stays trending uo
if low_supply_count % 150 == 0:
log_event('low_supply: ' +
str(low_supply_count) + ' supply: ' +
"{0:.2f}".format(ave_supply_temp) +
' return: ' +
"{0:.2f}".format(ave_return_temp))
low_supply_count += 1
elif boiler_md == 'none' and gv.now-last_boiler_off > 2*60 and \
gv.now-last_heatpump_on > 3*60:
log_event('reenable boiler; supply: ' +
"{0:.2f}".format(ave_supply_temp) +
' return: ' +
"{0:.2f}".format(ave_return_temp))
# Use only boiler for a while
if not boiler_through_buffer_tank:
remove_action({'what': 'set_valve_change'})
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': -100
})
# try an hour to warm things up and allow defrost mode on hp to finish and rewarm tank
last_on_min_gap = (gv.now - last_boiler_on) // 60
# gv.logger.info('last_on_min_gap: ' + str(last_on_min_gap) + ' now: ' + str(gv.now) + ' on: ' + str(last_boiler_on))
extra_min = 0 if last_on_min_gap >= 4 * 60 else 15 if last_on_min_gap >= 3 * 60 else 30
set_heatpump_mode('none')
set_boiler_mode('heating')
insert_action(gv.now + (extra_min + 59) * 60, {
'what': 'set_boiler_mode',
'mode': 'none'
})
else:
low_supply_count = 0
if gv.sd[
'mode'] == 'Heatpump Cooling' and gv.now - last_dewpoint_adjust >= 60:
dewpoint_margin = 1.5
target = max(dew + dewpoint_margin + 1, 10.)
adjust = 0
if ave_supply_temp >= 20:
failed_cold_supply += 1
if failed_cold_supply == 300:
log_event('COLD SUPPLY WATER FAILURE')
try:
gv.plugin_data['te']['tesender'].try_mail(
'Cooling', 'COLD SUPPLY WATER FAILURE')
except:
log_event(
'cold supply water failure email send failed'
)
elif failed_cold_supply % 300 == 0:
log_event(
'Ongoing cold supply water failure. Failcount: '
+ str(failed_cold_supply))
else:
failed_cold_supply = 0
if ave_supply_temp <= dew + dewpoint_margin and one_way_cooling_adjustments > min_cooling_adjustments:
remove_action({'what': 'set_valve_change'})
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': -100
})
msg = 'Close valve; avoid condensation'
log_event(msg + ': ' + "{0:.2f}".format(dew) +
'C target: ' + "{0:.2f}".format(target) +
'C supply: ' +
"{0:.2f}".format(ave_supply_temp) + 'C')
last_dewpoint_adjust = gv.now
last_ave_supply_temp = None
one_way_cooling_adjustments = min_cooling_adjustments
elif target < ave_supply_temp - .1:
remove_action({'what': 'set_valve_change'})
adjust = 0
if one_way_cooling_adjustments < 0:
one_way_cooling_adjustments = 0
adjust += 2
adjust += cooling_adjust_per_degree * (
ave_supply_temp - target)
if last_ave_supply_temp != None and last_ave_supply_temp - ave_supply_temp > 0 and \
gv.now-last_dewpoint_adjust <= 180: # already going down? Be patient
new_adjust = adjust - 2 * cooling_adjust_per_degree * (
last_ave_supply_temp - ave_supply_temp)
msg = 'already going down'
gv.logger.debug(msg + ': ' + \
' adjust: ' + "{0:.2f}".format(adjust) + \
' new_adjust: ' + "{0:.2f}".format(new_adjust))
adjust = max(0, new_adjust)
adjust = int(round(adjust))
msg = 'Ignoring request for more buffer tank water'
if adjust > 0 and one_way_cooling_adjustments < max_cooling_adjustments:
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': adjust
})
last_dewpoint_adjust = gv.now
last_ave_supply_temp = ave_supply_temp
msg = 'More buffer tank water'
elif target > ave_supply_temp + .1:
remove_action({'what': 'set_valve_change'})
adjust = 0
if one_way_cooling_adjustments > 0:
one_way_cooling_adjustments = 0
adjust -= 2
adjust += cooling_adjust_per_degree * (
ave_supply_temp - target)
if last_ave_supply_temp != None and last_ave_supply_temp - ave_supply_temp < 0 and \
gv.now-last_dewpoint_adjust <= 180: # already going up? Be patient
new_adjust = adjust - 2 * cooling_adjust_per_degree * (
last_ave_supply_temp - ave_supply_temp)
msg = 'already going up'
gv.logger.debug(msg + ': ' + \
' adjust: ' + "{0:.2f}".format(adjust) + \
' new_adjust: ' + "{0:.2f}".format(new_adjust))
adjust = min(0, new_adjust)
adjust = int(round(adjust))
msg = 'Ignoring request for more return water'
if adjust < 0 and one_way_cooling_adjustments > min_cooling_adjustments:
insert_action(
gv.now, {
'what': 'set_valve_change',
'valve_change_percent': adjust
})
last_dewpoint_adjust = gv.now
last_ave_supply_temp = ave_supply_temp
msg = 'More return water'
else:
msg = 'Not changing valve'
gv.logger.debug(msg + ': ' + str(one_way_cooling_adjustments) + \
' dew: ' + "{0:.2f}".format(dew) + 'C' + \
' target: ' + "{0:.2f}".format(target) + 'C' + \
' supply: ' + "{0:.2f}".format(ave_supply_temp) + 'C')
if (adjust > 0 and one_way_cooling_adjustments < max_cooling_adjustments) or \
(adjust < 0 and one_way_cooling_adjustments > min_cooling_adjustments):
one_way_cooling_adjustments += adjust
except:
gv.logger.exception('BUG')
def light_vsb_boards(delay=2):
boards = i2c.get_vsb_boards()
for board, version in boards.items():
if board not in gv.in_bootloader:
address = i2c.ADDRESS + board
blink_led(address, delay, 0)
def GET(self):
qdict = web.input()
try:
ddict = json.loads(qdict['data'])
except:
raise web.unauthorized()
force_reboot = False
info = {}
for l in ['wlog', 'elog', 'slog', 'evlog']:
if l in ddict and ddict[l]:
end = ddict['end_date']
days = ddict['days_before']
prefix = ''
try:
if l in ['slog', 'evlog']:
prefix = 'sensors/' + gv.plugin_data['ld'][int(ddict['ldi'])]['name'] + '/logs/'
except:
pass
records = read_log(prefix+l, end, days)
info[l] = records
for dlog in ['dlogirricloud', 'dlogirricloud_monitor', 'dlogirricloud_net_config']:
if dlog in ddict and ddict[dlog]:
records = []
try:
with open('./logs/' + dlog[4:] + '.out', 'r') as file:
records = file.readlines()
except:
pass
info[dlog] = []
for r in records:
info[dlog].append(r)
if 'lrun' in ddict and ddict['lrun']:
info['lrun'] = gv.lrun
if 'programs' in ddict:
if ddict['programs'] == 1:
info['programs'] = gv.pd
else:
gv.pd = ddict['programs']
jsave(gv.pd, 'programs')
info['programs'] = 1
if 'ps' in ddict and ddict['ps']:
info['ps'] = gv.ps
if 'sbits' in ddict and ddict['sbits']:
info['sbits'] = gv.sbits
if 'srvals' in ddict and ddict['srvals']:
info['srvals'] = gv.srvals
if 'sensors' in ddict and 'ld' in gv.plugin_data:
if ddict['sensors'] == 1:
info['sensors'] = []
try:
if 'ldi' not in ddict or int(ddict['ldi']) == -1:
info['sensors'] = gv.plugin_data['ld']
else:
info['sensors'] = gv.plugin_data['ld'][int(ddict['ldi'])]
except:
pass
info['sensboards'] = i2c.get_vsb_boards().keys()
info['remotesensboards'] = get_remote_sensor_boards()
else:
try:
if 'ldi' not in ddict or int(ddict['ldi']) == -1:
gv.plugin_data['ld'] = ddict['sensors']
else:
gv.plugin_data['ld'][int(ddict['ldi'])] = ddict['sensors']
except:
gv.plugin_data['ld'] = ddict['sensors']
jsave(gv.plugin_data['ld'], 'sensors')
info['sensors'] = 1
if 'camera' in ddict and 'ca' in gv.plugin_data:
if ddict['camera'] == 1:
info['camera'] = gv.plugin_data['ca']
if 'cai' in ddict and ddict['cai']:
info['cai'] = ''
if gv.plugin_data['ca']['enable_camera'] == 'on':
try:
with open('./static/images/camera.jpg', mode='rb') as file: # b is important -> binary
info['cai'] = base64.b64encode(file.read())
except:
pass
else:
gv.plugin_data['ca'] = ddict['camera']
jsave(gv.plugin_data['ca'], 'camera')
info['camera'] = 1
if 'sd' in ddict:
if ddict['sd'] == 1:
sd = gv.sd.copy()
del sd['substation_network']
del sd['salt']
del sd['password']
del sd['pwd']
del sd['enable_upnp'] # stuff from base configuration stays as was
del sd['subnet_only_substations']
del sd['external_proxy_port']
kill_keys = []
for k,v in sd.iteritems():
if len(k) > 2 and (k[0:2] == 'te' or k[0:2] == 'et'):
kill_keys.append(k)
for k in kill_keys:
del sd[k] # dont send textemail or et_weather stuff
info['sd'] = sd
else:
for field in ddict['sd']:
gv.sd[field] = ddict['sd'][field]
update_hostname(gv.sd['name'])
update_tza(gv.sd['tza'])
jsave(gv.sd, 'sd')
info['sd'] = 1
force_reboot = True
if 'snames' in ddict:
if ddict['snames'] == 1:
info['snames'] = gv.snames
else:
gv.snames = ddict['snames']
jsave(gv.snames, 'snames')
info['snames'] = 1
if 'snotes' in ddict:
if ddict['snotes'] == 1:
info['snotes'] = gv.snotes
else:
gv.snotes = ddict['snotes']
jsave(gv.snotes, 'snotes')
info['snotes'] = 1
if 'update_status' in ddict and ddict['update_status']:
updatechecker.update_rev_data()
info['update_status'] = updatechecker.status
web.header('Content-Type', 'application/json')
ret_str = json.dumps(info)
if force_reboot:
reboot(5) # give a few seconds to reply
return ret_str
def timing_loop():
""" ***** Main timing algorithm. Runs in a separate thread.***** """
last_min = 0
last_day = 0
last_master_station_running = 0
master_turn_on = 0
mton_delay = 0
gv.sd['bsy'] = 0
check_and_update_upnp()
last_upnp_refresh = gv.now
# Log the image and all the vsb board fw
try:
with open('data/version', 'r') as f:
image_version = f.read()
gv.logger.info('Image version: ' + image_version)
except:
pass
boards = i2c.get_vsb_boards()
for board, version in boards.items():
gv.logger.info('VSB Firmware for board: ' + str(board) + ' value: ' + hex(version))
for delay in range(15):
time.sleep(1) # wait for ip addressing to settle but keep updating time
gv.nowt = time.localtime() # Current time as time struct. Updated once per second.
gv.now = timegm(gv.nowt) # Current time as timestamp based on local time from the Pi. Updated once per second.
for i, p in enumerate(gv.pd): # get future instances of programs that recur but started earlier in the day
if prog_match(p, True):
schedule_recurring_instances(i)
ip_countdown = 2
while True: # infinite loop
gv.nowt = time.localtime() # Current time as time struct. Updated once per second.
gv.now = timegm(gv.nowt) # Current time as timestamp based on local time from the Pi. Updated once per second.
if gv.sd['en'] and not gv.sd['mm']:
if gv.now // 60 != last_min: # only check programs once a minute
last_min = gv.now // 60
update_radio_present()
max_bd = -1
boards = i2c.get_vsb_boards()
for bd, version in boards.items():
if bd not in gv.in_bootloader:
try:
max_bd = max(max_bd, bd)
v = i2c_read(i2c.ADDRESS+bd, 0xc) # verify scratch value is as expected. Acts as a touch of the vsb too!
if v != bd+16:
gv.logger.critical('Main bad scratch value on board: ' + str(bd) + ' value: ' + str(v))
i2c_write(i2c.ADDRESS+bd, 0xc, bd+16) # write scratch register as keepalive
except:
gv.logger.critical('Cant access scratch register on board: ' + str(bd))
pass
# read deadman debug register ignoring all errors.
try:
v = i2c_read(i2c.ADDRESS+bd, 0xd)
if v != 0:
gv.logger.critical('Deadman register triggered on board: ' + str(bd) + ' value: ' + str(v))
except:
pass
cur_bd = (gv.sd['nst']-gv.sd['radiost'])//8
if max_bd+1 > cur_bd: # ensure at nbrd captures all attached VSMs
gv.logger.info('Changing nbrd based on attached boards: ' + str(max_bd+1))
adjust_gv_nbrd(max_bd+1)
gv.sd['nst'] += 8*(max_bd+1-cur_bd)
jsave(gv.sd, 'sd')
cur_ip = get_ip()
ext_ip_addr = get_external_ip()
ip_countdown = 2 if cur_ip == gv.last_ip else ip_countdown-1
# when establishing bridge, wlan0 appears to drop then come back....just take a couple of iterations to
# be sure we have an ip change.
if ip_countdown == 0:
ip_countdown = 2 # reset
if gv.sd['master'] and (ext_ip_addr != gv.external_ip or cur_ip != gv.last_ip):
gv.external_ip = ext_ip_addr
try:
# send email if ip addressing changed
if gv.sd['teipchange'] and gv.plugin_data['te']['tesender']:
subject = "Report from Irricloud"
body = 'IP change. Local IP: ' + cur_ip
if gv.sd['htp'] != 0 and gv.sd['htp'] != 80:
body += ':' + str(gv.sd['htp'])
body += ' External IP: ' + ext_ip_addr
if gv.sd['external_htp'] != 0:
body += ':' + str(gv.sd['external_htp'])
gv.plugin_data['te']['tesender'].try_mail(subject, body)
except:
pass
if cur_ip != gv.last_ip:
gv.logger.info('IP changed from: ' + gv.last_ip + ' to: ' + cur_ip)
gv.last_ip = cur_ip
if cur_ip != "No IP Settings":
# find router, set up upnp port mapping
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
if gv.sd['upnp_refresh_rate'] > 0 and \
(gv.now-last_upnp_refresh)//60 >= gv.sd['upnp_refresh_rate']:
check_and_update_upnp(cur_ip)
last_upnp_refresh = gv.now
cur_day = gv.now//86400
if cur_day != last_day:
for i in range(gv.sd['nst']):
for j in range(len(gv.rs[i])-1,0,-1):
if gv.rs[i][j]['rs_stop_sec'] < gv.now:
gv.logger.critical('Left over data on gv.rs['+str(i)+']')
del gv.rs[i][j]
elif gv.rs[i][j]['rs_stop_sec'] > gv.now + 86400: # indefinite program?
gv.rs[i][j]['rs_stop_sec'] += 86400 # keep extending
update_rs_order(i)
last_day = cur_day
for i, p in enumerate(gv.pd): # get both index and prog item
if prog_match(p):
gv.logger.debug('prog_match for program: ' + p[-1])
run_program(i)
schedule_recurring_instances(i)
for e in gv.recur[:]: # sorted by start times of recurring programs to run
now_min = (gv.now%86400)//60
if e[0] <= now_min:
try:
gv.logger.debug('recur match for program: ' + gv.pd[e[1]][-1])
except:
pass
run_program(e[1]) # pid
del gv.recur[0] # always deleting what is (now) first in list
else:
break
if gv.sd['bsy']:
with gv.rs_lock:
program_running = False
masid = gv.sd['mas']-1
for sid in range(gv.sd['nst']): # Check each station once a second
b = sid >> 3
s = sid % 8
prog_id = gv.rs[sid][len(gv.rs[sid])-1]['rs_program_id']
p = None if prog_id >= len(gv.pd) else gv.pd[prog_id-1]
if gv.now >= gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec'] and len(gv.rs[sid]) > 1: # check if time is up
stop_station(sid, **{'stop_only_current':1})
elif gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec'] <= gv.now < gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec']:
if (gv.sbits[b] & (1<<s)) == 0: # not yet displayed?
duration = gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec'] - gv.now
gv.logger.info('start station display sid: ' + str(sid+1) + ' for: ' + to_relative_time(duration))
gv.sbits[b] |= 1 << s # Set display to on
gv.ps[sid][0] = prog_id
if gv.ps[sid][1] != duration:
gv.logger.info('sip_loop ps_set: change ps sid: ' + str(sid+1) + ' from: ' + to_relative_time(gv.ps[sid][1])+ ' to: ' + to_relative_time(duration))
gv.ps[sid][1] = duration
if p is None or (p[gv.p_flags]&2) == 0: # if not ban program
gv.logger.info('turn on sid: ' + str(sid+1) + ' prog: ' + str(prog_id) + ' (ps set) dur: ' + to_relative_time(duration))
gv.srvals[sid] = 1
set_output()
else: # already stopped what was running in schedule_stations
gv.logger.info('turn on ban sid: ' + str(sid+1) + ' prog: ' + str(prog_id) + ' (ps set) dur: ' + to_relative_time(duration))
if sid == gv.sd['mas']-1: # when we turn on master, start mton countdown
mton_delay = -gv.sd['mton']
elif gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec'] > gv.now and gv.ps[sid][0] == 0:
duration = gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec'] - gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec']
gv.ps[sid][0] = prog_id
if gv.ps[sid][1] != duration:
gv.logger.info('sip_loop ps_change: change ps sid: ' + str(sid+1) + ' from: ' + to_relative_time(gv.ps[sid][1]) + ' to: ' + to_relative_time(duration))
gv.ps[sid][1] = duration
gv.logger.info('future: ' + to_relative_time(gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec']) +
' turn on sid: ' + str(sid+1) + ' prog: ' + str(prog_id) + ' (ps set) dur: ' + to_relative_time(duration))
if masid >= 0 and sid != masid and gv.srvals[sid] and gv.sd['mo'][b]&(1<<s): # Master settings
last_master_station_running = gv.now
if len(gv.rs[sid]) > 1: # if any station is scheduled or on
program_running = True
# delays may have screwed up master scheduling.
# If a station requiring master is running and master is not started, start it.
if masid >= 0 and gv.srvals[masid] == 0:
if master_turn_on == 0 and last_master_station_running == gv.now:
master_turn_on = last_master_station_running + gv.sd['mton']
if master_turn_on != 0 and master_turn_on <= gv.now:
gv.logger.info('turn on master without prescheduling mton: ' + str(master_turn_on))
gv.sbits[masid>>3] |= 1 << (masid%8) # Set display to on
gv.ps[masid][0] = 98
gv.ps[masid][1] = 0
gv.srvals[masid] = 1
set_output()
master_turn_on = 0
# If no station requiring master is running and master is not stopped, stop it.
if masid >= 0 and gv.srvals[masid] == 1:
if mton_delay >= 0:
mton_delay -= 1
if (mton_delay < 0 and # allow for windown where master starts early
last_master_station_running < gv.now and
((gv.sd['mtoff'] <= 0 and last_master_station_running >= gv.now + gv.sd['mtoff']) or \
(gv.sd['mtoff'] > 0 and last_master_station_running + gv.sd['mtoff'] <= gv.now))):
gv.logger.info('turn off master without prescheduling')
stop_station(masid, **{'stop_active':1})
mton_delay = 0
else:
program_running = True # give time for master to shut down
if program_running:
# todo check stop_onrain for ban programs
if gv.sd['urs'] and gv.sd['rs']: # Stop stations if use rain sensor and rain detected.
stop_onrain() # Clear schedule for stations that do not ignore rain.
for sid in range(len(gv.rs)): # loop through program schedule (gv.ps)
if (gv.sbits[sid>>3] & (1<<(sid%8))) != 0: # If station is on, decrement time remaining display
if gv.ps[sid][1] < 86400: # dont reduce indefinite program
if gv.ps[sid][1] == -1:
gv.logger.critical('sip negative ps decrement sid: ' + str(sid+1) + ' to: ' + to_relative_time(gv.ps[sid][1]) + \
' start: ' + to_relative_time(gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec']) + \
' stop: ' + to_relative_time(gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec']))
gv.ps[sid][1] -= 1
else:
gv.logger.debug('sip_ indefinite program sid: ' + str(sid+1) + ' to: ' + to_relative_time(gv.ps[sid][1]) + \
' start: ' + to_relative_time(gv.rs[sid][len(gv.rs[sid])-1]['rs_start_sec']) + \
' stop: ' + to_relative_time(gv.rs[sid][len(gv.rs[sid])-1]['rs_stop_sec']))
pass
if not program_running:
gv.sd['bsy'] = 0
for sid in range(gv.sd['nst']):
b = sid >> 3
s = sid % 8
if gv.srvals[sid]:
gv.logger.critical('srval set with no program running sid: ' + str(sid+1))
if gv.sbits[b]&(1<<s):
gv.logger.critical('sbits set with no program running sid: ' + str(sid+1))
if gv.ps[sid][0]:
gv.logger.critical('ps[0] set with no program running sid: ' + str(sid+1))
if gv.ps[sid][1]:
gv.logger.critical('ps[1] set with no program running sid: ' + str(sid+1))
if gv.sd['urs']:
check_rain() # in helpers.py
if gv.sd['rd'] and gv.now >= gv.sd['rdst']: # Check of rain delay time is up
gv.sd['rd'] = 0
gv.sd['rdst'] = 0 # Rain delay stop time
jsave(gv.sd, 'sd')
new_now = timegm(time.localtime())
if new_now - gv.now == 0: # try to avoid drift
time.sleep(1)
def check_factory_reset():
"""Check every five seconds to see if we need to do a factory reset"""
global config_mode
while True:
time.sleep(5)
try:
factory_reset = False
i2c_reset = False
try:
# if factory_reset file is present or hw button is pushed.
if pi.read(button_pin) == 0:
factory_reset = True
logger.warning('button factory reset')
else:
try:
with open('data/factory_reset','r') as f:
factory_reset = True
logger.warning('file factory reset')
if factory_reset:
subprocess.call(['rm', 'data/factory_reset'])
except:
pass
except Exception as ex:
logger.warning('button read failure: ' + str(ex))
if factory_reset:
# Factory reset request
logger.warning('factory reset')
light_vsb_boards()
try:
type = ''
usbs = subprocess.check_output(['lsusb'])
usbl = usbs.split('\n')
for usb in usbl:
if 'Ralink Technology' in usb:
type = 'CanaKit' if type == '' else 'Unknown'
elif 'Realtek Semiconductor' in usb:
type = 'TP' if type == '' else 'Unknown'
if type != '' and type != 'Unknown':
for file in ['/etc/hostapd/hostapd.conf', '/usr/sbin/hostapd', '/etc/wpa_supplicant/functions.sh']:
rc = subprocess.call(['diff', file, file+'-'+type])
if rc == 0:
logger.debug(file + ' and ' + file+'-'+type + ' match')
else:
logger.critical('Rebinding ' + file + ' to match ' + file+'-'+type)
subprocess.call(['rm', file])
subprocess.call(['ln', '-s', file+'-'+type, file])
else:
logger.info('leaving hostapd and wpa_supplicant unchanged. type: ' + type)
except Exception as ex:
logger.exception('Could not validate/change hostapd and wpa_supplicant usage: ' + str(ex))
logger.info('restoring orig /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf')
config_mode = True
shutil.copy2('/etc/network/interfaces.orig', '/etc/network/interfaces')
shutil.copy2('/etc/wpa_supplicant/wpa_supplicant.conf.orig', '/etc/wpa_supplicant/wpa_supplicant.conf')
shutil.copy2('/etc/dhcpcd.conf.orig', '/etc/dhcpcd.conf')
logger.info('starting sip_net_start')
rc = subprocess.call(['/usr/bin/python', '/home/pi/Irricloud/sip_net_start.py']) # leads to reboot
logger.debug( 'sip_net_start rc: ' + str(rc))
time.sleep(10)
else:
try:
with open('data/i2c_reset','r') as f:
i2c_reset = True
logger.warning('file i2c_reset')
if i2c_reset:
subprocess.call(['rm', 'data/i2c_reset'])
except:
pass
if i2c_reset:
# Factory reset request
boards = i2c.get_vsb_boards()
for board, version in boards.items():
if board not in gv.in_bootloader:
logger.warning('i2c reset board: ' + str(board+1))
i2c.i2c_reset(i2c.ADDRESS+board)
else:
logger.critical('i2c reset aborted board: ' + str(board+1) + ' in bootloader version: ' + hex(version))
logger.info('reboot.')
reboot(0, True)
except Exception as ex:
logger.critical('check_factory_reset exception: ' + str(ex))
def light_vsb_boards(delay=2):
boards = i2c.get_vsb_boards()
for board, version in boards.items():
if board not in gv.in_bootloader:
address = i2c.ADDRESS + board
blink_led(address, delay, 0)
