def push_rotate(objPose=[1.95,0.25,1.4,0,0,0,1],
binNum=4,
objId = 'crayola_64_ct',
bin_contents = None,
robotConfig = None,
grasp_range_lim=0.11,
fing_width=0.06,
isExecute = True,
withPause = True):
#~ *****************************************************************
obj_dim=get_obj_dim(objId)
obj_dim=np.array(obj_dim)
#~ *****************************************************************
# # DEFINE HAND WIDTH#########################
hand_width=0.186
#~ *****************************************************************
## initialize listener rospy
listener = tf.TransformListener()
br = tf.TransformBroadcaster()
rospy.sleep(0.2)
(shelf_position, shelf_quaternion) = lookupTransform("map", "shelf", listener)
# print shelf_position, shelf_quaternion
#~ *****************************************************************
# Convert xyx quat to tranformation matrix for Shelf frame
#~ shelf_pose_tfm_list=matrix_from_xyzquat(shelfPose[0:3], shelfPose[3:7])
shelf_pose_tfm_list=matrix_from_xyzquat(shelf_position,shelf_quaternion)
shelf_pose_tfm=np.array(shelf_pose_tfm_list)
shelf_pose_orient=shelf_pose_tfm[0:3,0:3]
#~ print 'shelf_pose_orient'
#~ print shelf_pose_orient
shelf_pose_pos=shelf_pose_tfm[0:3,3]
#~ print 'shelf_pose_pos'
#~ print shelf_pose_pos
#Normalized axes of the shelf frame
shelf_X=shelf_pose_orient[:,0]/la.norm(shelf_pose_orient[:,0])
shelf_Y=shelf_pose_orient[:,1]/la.norm(shelf_pose_orient[:,1])
shelf_Z=shelf_pose_orient[:,2]/la.norm(shelf_pose_orient[:,2])
#~ *****************************************************************
# Convert xyx quat to tranformaation matrix for Object frame
obj_pose_tfm_list=matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm=np.array(obj_pose_tfm_list)
obj_pose_orient=obj_pose_tfm[0:3,0:3]
obj_pose_pos=obj_pose_tfm[0:3,3]
#~ print 'obj_pose_orient'
#~ print obj_pose_orient
#Normalized axes of the object frame
obj_X=obj_pose_orient[:,0]/la.norm(obj_pose_orient[:,0])
#~ print 'obj_X'
#~ print obj_X
obj_Y=obj_pose_orient[:,1]/la.norm(obj_pose_orient[:,1])
#~ print 'obj_Y'
#~ print obj_Y
obj_Z=obj_pose_orient[:,2]/la.norm(obj_pose_orient[:,2])
#~ print 'obj_Z'
#~ print obj_Z
#Normalized object frame
obj_pose_orient_norm=np.vstack((obj_X,obj_Y,obj_Z))
obj_pose_orient_norm=obj_pose_orient_norm.transpose()
#~ print 'obj_pose_orient_norm'
#~ print obj_pose_orient_norm
#~ *****************************************************************
# We will assume that hand normal tries to move along object dimension along the Y axis of the shelf (along the lenght of the bin)
# Find projection of object axes on Y axis of the shelf frame
proj_vecY=np.dot(shelf_Y,obj_pose_orient_norm)
#~ print 'proj'
#~ print proj_vecY
max_proj_valY,hand_norm_dir=np.max(np.fabs(proj_vecY)), np.argmax(np.fabs(proj_vecY))
if proj_vecY[hand_norm_dir]>0:
hand_norm_vec=-obj_pose_orient_norm[:,hand_norm_dir]
else:
hand_norm_vec=obj_pose_orient_norm[:,hand_norm_dir]
#~ print 'hand_norm_vec'
#~ print hand_norm_vec
#Find angle of the edge of the object
Cos_angle_made_with_shelf_Y=max_proj_valY/(la.norm(shelf_Y)*la.norm(hand_norm_vec));
angle_to_shelfY=np.arccos(Cos_angle_made_with_shelf_Y)*180.0/np.pi
#~ print'angle_to_shelfY'
#~ print angle_to_shelfY
#Find object dimension along hand normal axis
obj_dim_along_hand_norm=obj_dim[hand_norm_dir]
print '[PushRotate] dim along hand norm', obj_dim_along_hand_norm
#~ *****************************************************************
#Find projection of object axes on X axis of the shelf frame
#To find out which object frame is lying closer to the X axis of the shelf
proj_vecX=np.dot(shelf_X,obj_pose_orient_norm)
max_proj_valX,fing_axis_dir=np.max(np.fabs(proj_vecX)), np.argmax(np.fabs(proj_vecX))
if proj_vecX[fing_axis_dir]>0:
fing_axis_vec=obj_pose_orient_norm[:,fing_axis_dir]
else:
fing_axis_vec=-obj_pose_orient_norm[:,fing_axis_dir]
#~ print 'fing_axis_vec'
#~ print fing_axis_vec
#Find object dimension along the finger axis
obj_dim_along_fingAxis=obj_dim[fing_axis_dir]
print '[PushRotate] obj_dim_along_fingAxis:', obj_dim_along_fingAxis
#~ *****************************************************************
#Find projection of object axes on Z axis of the shelf frame
#To find out which object frame is lying closer to the Z axis of the shelf
proj_vecZ=np.dot(shelf_Z,obj_pose_orient_norm)
max_proj_valZ,Zaxis_dir=np.max(np.fabs(proj_vecZ)), np.argmax(np.fabs(proj_vecZ))
Zaxis_vec=obj_pose_orient_norm[:,Zaxis_dir]
#~ print 'Zaxis_vec'
#~ print Zaxis_vec
#Find object dimension along the finger axis, shelf Z
obj_dim_along_ZAxis=obj_dim[Zaxis_dir]
hand_Y=np.cross(hand_norm_vec,fing_axis_vec)
#~ *****************************************************************
#################### DECISION STRATEGIES #########################
bin_inner_cnstr=get_bin_inner_cnstr()
proj_handNorm_ShelfX=np.dot(hand_norm_vec,shelf_X)
right_push=False
left_push=False
# print 'obj_dim_along_hand_norm', obj_dim_along_hand_norm
# print 'obj_dim_along_fingAxis', obj_dim_along_fingAxis
#
# print 'proj_handNorm_ShelfX'
# print proj_handNorm_ShelfX
if obj_dim_along_hand_norm>obj_dim_along_fingAxis:
#~ print 'proj_vecY'
#~ print proj_vecY
#~ print proj_vecY[hand_norm_dir]
#~
#~ print 'proj_vecX'
#~ print proj_vecX
#~ print proj_vecX[fing_axis_dir]
#~ if proj_vecY[hand_norm_dir]*proj_vecX[fing_axis_dir]<0:
#~ #Do left push
#~ Ypush_mult=1
#~ print 'Left Push'
#~ else:
#~ #Do right push
#~ Ypush_mult=-1
#~ print 'right Push'
if proj_handNorm_ShelfX>0:
#Do left push
Ypush_mult=1
left_push=True
print '[PushRotate] Left Push'
else:
#Do right push
Ypush_mult=-1
print '[PushRotate] right Push'
right_push=True
push_offset=(obj_dim_along_hand_norm/2.0) #(Instead pf pushing on edge we will push 5 mm inside)
else:
#~ if proj_vecY[hand_norm_dir]*proj_vecX[fing_axis_dir]<0:
#~ #Do right push
#~ Ypush_mult=-1
#~ print 'right Push'
#~ else:
#~ #Do left push
#~ Ypush_mult=1
#~ print 'Left Push'
if proj_handNorm_ShelfX>0:
#Do right push
Ypush_mult=-1
print '[PushRotate] right Push'
right_push=True
else:
#Do left push
Ypush_mult=1
print '[PushRotate] Left Push'
left_push=True
push_offset=(obj_dim_along_fingAxis/2.0)
num_intm_points=5
push_x_intm=np.zeros(num_intm_points+1)
push_y_intm=np.zeros(num_intm_points+1)
backWall_shelf=bin_inner_cnstr[binNum][1]
backWall_world = coordinateFrameTransform([0,backWall_shelf,0], 'shelf', 'map', listener)
back_check=backWall_world.pose.position.x-obj_dim_along_hand_norm/2.0
binRightWall=bin_inner_cnstr[binNum][0]
binLeftWall=bin_inner_cnstr[binNum][1]
binRightWall_world = coordinateFrameTransform([binRightWall,0,0], 'shelf', 'map', listener)
binLeftWall_world = coordinateFrameTransform([binLeftWall,0,0], 'shelf', 'map', listener)
if left_push:
sideWall_check=binRightWall_world.pose.position.y+(fing_width/2.0)+(obj_dim_along_fingAxis)
if right_push:
sideWall_check=binLeftWall_world.pose.position.y-(fing_width/2.0)-(obj_dim_along_fingAxis)
for i in range(num_intm_points+1):
push_x_intm[i]=obj_pose_pos[0]+(push_offset)*np.sin(((90/num_intm_points)*i*np.pi)/180.0)
if push_x_intm[i]>back_check:
push_x_intm[i]=back_check
push_y_intm[i]=obj_pose_pos[1]+(Ypush_mult*push_offset)*np.cos(((90/num_intm_points)*i*np.pi)/180.0)
if left_push:
if push_y_intm[i]<sideWall_check:
push_y_intm[i]=sideWall_check
print '[PushRotate] push Y reduced, I do not want to crush the obj and gripper'
if right_push:
if push_y_intm[i]>sideWall_check:
push_y_intm[i]=sideWall_check
print '[PushRotate] push Y reduced, I do not want to crush the obj and gripper'
push_x_intm=np.array(push_x_intm)
#~ print'push_x_intm'
#~ print push_x_intm
push_y_intm=np.array(push_y_intm)
#*******************************************************************
#Move the hand to the center of the bin and open the hand based on the height of the object
bin_mid_pos,binFloorHeight=getBinMouthAndFloor(0.0, binNum)
binFloorHeight_world = coordinateFrameTransform([0,0,binFloorHeight], 'shelf', 'map', listener)
bin_mid_pos_world = coordinateFrameTransform(bin_mid_pos, 'shelf', 'map', listener)
#*******************************************************************
tcp_Z_off=0.005
push_tcp_Z_shelfFrame=((bin_inner_cnstr[binNum][4]+bin_inner_cnstr[binNum][5])/2.0)-tcp_Z_off
push_tcp_Z_WorldFrame = coordinateFrameTransform([0,0,push_tcp_Z_shelfFrame], 'shelf', 'map', listener)
push_tcp_Z=push_tcp_Z_WorldFrame.pose.position.z
push_z_intm=(push_tcp_Z)*np.ones(push_x_intm.size)
push_series_pos=np.vstack((push_x_intm,push_y_intm,push_z_intm))
push_series_pos=push_series_pos.transpose()
#~ print 'push_series_pos'
#~ print push_series_pos
#~ print push_series_pos[0,:]
#~ print push_series_pos[-1,:]
push_possible=True
#******************************************************************
fing_push_pt=0.2*obj_dim_along_ZAxis+binFloorHeight_world.pose.position.z
blade_tip_TCP_off=0.038 # dist between finger inner end and spatual edge
push_hand_opening=2*(push_tcp_Z-blade_tip_TCP_off-fing_push_pt)
if push_hand_opening>grasp_range_lim:
push_hand_opening=grasp_range_lim
# Spatula finger should not hit the lip of the bin while pushing
lip_Z_shelf=bin_inner_cnstr[binNum][4]
lip_Z_world=coordinateFrameTransform([0,0,lip_Z_shelf], 'shelf', 'map', listener)
#~ lip_off=.025
#~ bin_lip_Z=binFloorHeight_world.pose.position.z+lip_off
max_allowed_hand_opening_out=2*(push_tcp_Z-lip_Z_world.pose.position.z)
max_allowed_hand_opening=max_allowed_hand_opening_out-0.036 # 0.036 is diff between inside and outside of the finger/finger mount surface
if push_hand_opening>max_allowed_hand_opening:
print '[PushRotate] reducing hand opening bcaz it may hit the lip of the bin'
push_hand_opening=max_allowed_hand_opening
#~ print 'push_hand_opening'
#~ print push_hand_opening
#~ #hand should not hit the side walls
#~ binRightWall,binLeftWall=find_shelf_walls(binNum)
#~
#~ binRightWall_world = coordinateFrameTransform([binRightWall,0,0], 'shelf', 'map', listener)
#~ binLeftWall_world = coordinateFrameTransform([binLeftWall,0,0], 'shelf', 'map', listener)
side_wall_clearance=0.0
print '[PushRotate] binRightWall_world.pose.position.y', binRightWall_world.pose.position.y
print '[PushRotate] right_hand_edge=', (push_y_intm[0]-fing_width-side_wall_clearance)
print '[PushRotate] binLeftWall_world.pose.position.y', binLeftWall_world.pose.position.y
print '[PushRotate] left_hand_edge=', (push_y_intm[0]+fing_width+side_wall_clearance)
if push_y_intm[0]-fing_width-side_wall_clearance<binRightWall_world.pose.position.y:
print '[PushRotate] Hand will hit the right wall, Push rotate not possible'
push_possible=False
if push_y_intm[0]+fing_width+side_wall_clearance>binLeftWall_world.pose.position.y:
print '[PushRotate] Hand will hit the left wall, push rotate not possible'
push_possible=False
#~ *************************************************************
# set spatual down orientation (rotate wrist)
spatula_down_orient = [0, 0.7071, 0, 0.7071]
push_orient=deepcopy(spatula_down_orient)
#~ *************************************************************
if push_possible==True:
#Now we know where we wan to move TCP
#Let's do robot motion planning now
joint_topic = '/joint_states'
# plan store
plans = []
# set tcp (same as that set in generate dictionary)
l1=0.0
l2=0.0
l3 = 0.47
tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br, pose=tip_hand_transform, frame_id='tip', parent_frame_id='link_6', npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [mouthPt.pose.position.x, mouthPt.pose.position.y, mouthPt.pose.position.z]
gripperOri=[0, 0.7071, 0, 0.7071]
pubFrame(br, pose = targetPosition+gripperOri, frame_id='target_pose', parent_frame_id='link_6', npub=5)
planner = IK(q0 = q_initial, target_tip_pos = targetPosition, target_tip_ori = gripperOri, tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushRotate] move to bin mouth in push-rotate code successful'
#plan.visualize()
plans.append(plan) # Plan 0
#if isExecute:
# pauseFunc(withPause)
# plan.execute()
else:
print '[PushRotate] move to bin mouth in push-rotate code fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
plans.append(grasp_plan)
#~ moveGripper(0.1,100)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1=0.0 #0.035
push_l2=-Ypush_mult*(fing_width/2.0) # This should depend on the righ or left push conditions
push_l3 = 0.47
push_tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br, pose=push_tip_hand_transform, frame_id='push_tip', parent_frame_id='link_6', npub=10)
#~ q_initial = robotConfig
# move just inside the bin with push orientation and open the hand suitable to push
distFromShelf = -0.01
InbinPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [InbinPt.pose.position.x, push_series_pos[0,1] , InbinPt.pose.position.z] #matching world_Y of first push pt
print '[PushRotate] prepush_targetPosition=', prepush_targetPosition
pubFrame(br, pose=prepush_targetPosition+push_orient, frame_id='target_pose', parent_frame_id='map', npub=10)
planner = IK(q0 = q_initial, target_tip_pos = prepush_targetPosition, target_tip_ori = push_orient, tip_hand_transform=push_tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('slow')
s = plan.success()
if s:
print '[PushRotate] move inside bin in push orient successful'
#~ print 'tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushRotate] move inside bin in push orient fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH ###############
# Open the gripper to dim calculated for pushing
print '[PushRotate] hand opening to'
print push_hand_opening*1000.0
#~ moveGripper(push_hand_opening,100)
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
#~ push_rotate_traj = Plan()
#~ push_rotate_traj.q_traj = qf
for i in range(0,push_x_intm.size):
pushpt_pos=push_series_pos[i,:].transpose()
pubFrame(br, pose=pushpt_pos.tolist()+push_orient, frame_id='target_pose', parent_frame_id='map', npub=10)
#~ pdb.set_trace()
# planner = IK(q0 = q_initial, target_tip_pos = graspPT_pose_pos, target_tip_ori = push_orient,
# joint_topic=joint_topic, tip_hand_transform=tip_hand_transform, straightness = 0.3, inframebb = inframebb)
planner = IK(q0 = q_initial, target_tip_pos = pushpt_pos, target_tip_ori = push_orient,
joint_topic=joint_topic, tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('slow')
s = plan.success()
if s:
print '[PushRotate] point inside push traj successful'
#~ print 'tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushRotate] point inside push traj fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
#~ if isExecute:
#~ pauseFunc(withPause)
#~ push_rotate_traj.execute()
#################### CLOSE THE GRIPPER GRASP #################
#~ moveGripper(0.0,100)
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[numOfPlan].visualize()
pauseFunc(withPause)
plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[len(plans)-numOfPlan-1].visualizeBackward()
pauseFunc(withPause)
plans[len(plans)-numOfPlan-1].executeBackward()
#*******************************************************************
print '[PushRotate] push_successful'
return (push_possible,False)
def push_back(objPose=[1.95, 0.25, 1.4, 0, 0, 0, 1],
binNum=4,
objId='crayola_64_ct',
bin_contents=[
'paper_mate_12_count_mirado_black_warrior', 'crayola_64_ct',
'expo_dry_erase_board_eraser'
],
robotConfig=None,
grasp_range_lim=0.11,
fing_width=0.06,
isExecute=True,
withPause=True):
#~ *****************************************************************
obj_dim = get_obj_dim(objId)
obj_dim = np.array(obj_dim)
#~ *****************************************************************
# # DEFINE HAND WIDTH#########################
hand_width = 0.186
#~ *****************************************************************
## initialize listener rospy
listener = tf.TransformListener()
rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
(shelf_position,
shelf_quaternion) = lookupTransform("map", "shelf", listener)
# print shelf_position, shelf_quaternion
#~ *****************************************************************
# Convert xyx quat to tranformation matrix for Shelf frame
#~ shelf_pose_tfm_list=matrix_from_xyzquat(shelfPose[0:3], shelfPose[3:7])
shelf_pose_tfm_list = matrix_from_xyzquat(shelf_position, shelf_quaternion)
shelf_pose_tfm = np.array(shelf_pose_tfm_list)
shelf_pose_orient = shelf_pose_tfm[0:3, 0:3]
#~ print '[PushBack] shelf_pose_orient'
#~ print shelf_pose_orient
shelf_pose_pos = shelf_pose_tfm[0:3, 3]
#~ print '[PushBack] shelf_pose_pos'
#~ print shelf_pose_pos
#Normalized axes of the shelf frame
shelf_X = shelf_pose_orient[:, 0] / la.norm(shelf_pose_orient[:, 0])
shelf_Y = shelf_pose_orient[:, 1] / la.norm(shelf_pose_orient[:, 1])
shelf_Z = shelf_pose_orient[:, 2] / la.norm(shelf_pose_orient[:, 2])
#~ *****************************************************************
# Convert xyx quat to tranformaation matrix for Object frame
obj_pose_tfm_list = matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm = np.array(obj_pose_tfm_list)
obj_pose_orient = obj_pose_tfm[0:3, 0:3]
obj_pose_pos = obj_pose_tfm[0:3, 3]
#~ print '[PushBack] obj_pose_orient'
#~ print obj_pose_orient
#Normalized axes of the object frame
obj_X = obj_pose_orient[:, 0] / la.norm(obj_pose_orient[:, 0])
#~ print '[PushBack] obj_X'
#~ print obj_X
obj_Y = obj_pose_orient[:, 1] / la.norm(obj_pose_orient[:, 1])
#~ print '[PushBack] obj_Y'
#~ print obj_Y
obj_Z = obj_pose_orient[:, 2] / la.norm(obj_pose_orient[:, 2])
#~ print '[PushBack] obj_Z'
#~ print obj_Z
#Normalized object frame
obj_pose_orient_norm = np.vstack((obj_X, obj_Y, obj_Z))
obj_pose_orient_norm = obj_pose_orient_norm.transpose()
#~ print '[PushBack] obj_pose_orient_norm'
#~ print obj_pose_orient_norm
#~ *****************************************************************
# We will assume that hand normal tries to move along object dimension along the Y axis of the shelf (along the lenght of the bin)
# Find projection of object axes on Y axis of the shelf frame
proj_vecY = np.dot(shelf_Y, obj_pose_orient_norm)
#~ print '[PushBack] proj'
#~ print proj_vecY
max_proj_valY, hand_norm_dir = np.max(np.fabs(proj_vecY)), np.argmax(
np.fabs(proj_vecY))
if proj_vecY[hand_norm_dir] > 0:
hand_norm_vec = -obj_pose_orient_norm[:, hand_norm_dir]
else:
hand_norm_vec = obj_pose_orient_norm[:, hand_norm_dir]
#~ print '[PushBack] hand_norm_vec'
#~ print hand_norm_vec
#Find angle of the edge of the object
Cos_angle_made_with_shelf_Y = max_proj_valY / (la.norm(shelf_Y) *
la.norm(hand_norm_vec))
angle_to_shelfY = np.arccos(Cos_angle_made_with_shelf_Y) * 180 / np.pi
#~ print'angle_to_shelfY'
#~ print angle_to_shelfY
#Find object dimension along hand normal axis
obj_dim_along_hand_norm = obj_dim[hand_norm_dir]
# print '[PushBack] dim along hand norm'
# print obj_dim_along_hand_norm
#~ *****************************************************************
#Find projection of object axes on X axis of the shelf frame
#To find out which object frame is lying closer to the X axis of the shelf
proj_vecX = np.dot(shelf_X, obj_pose_orient_norm)
max_proj_valX, fing_axis_dir = np.max(np.fabs(proj_vecX)), np.argmax(
np.fabs(proj_vecX))
if proj_vecX[fing_axis_dir] > 0:
fing_axis_vec = obj_pose_orient_norm[:, fing_axis_dir]
else:
fing_axis_vec = -obj_pose_orient_norm[:, fing_axis_dir]
#~ print '[PushBack] fing_axis_vec'
#~ print fing_axis_vec
#Find object dimension along the finger axis
obj_dim_along_fingAxis = obj_dim[fing_axis_dir]
# print '[PushBack] obj_dim_along_fingAxis'
# print obj_dim_along_fingAxis
#~ *****************************************************************
#Find projection of object axes on Z axis of the shelf frame
#To find out which object frame is lying closer to the Z axis of the shelf
proj_vecZ = np.dot(shelf_Z, obj_pose_orient_norm)
max_proj_valZ, Zaxis_dir = np.max(np.fabs(proj_vecZ)), np.argmax(
np.fabs(proj_vecZ))
Zaxis_vec = obj_pose_orient_norm[:, Zaxis_dir]
#~ print '[PushBack] Zaxis_vec'
#~ print Zaxis_vec
#Find object dimension along the finger axis, shelf Z
obj_dim_along_ZAxis = obj_dim[Zaxis_dir]
hand_Y = np.cross(hand_norm_vec, fing_axis_vec)
diag_dist = la.norm(
np.array([obj_dim_along_hand_norm, obj_dim_along_fingAxis]))
# print'req obj diag dist=', diag_dist
#~ *****************************************************************
# Find the maximum distance to which we will push
other_diag = np.zeros(len(bin_contents))
for num_bin_contents in range(0, len(bin_contents)):
if bin_contents[num_bin_contents] != objId:
temp_obj_dim = get_obj_dim(objId)
other_diag[num_bin_contents] = la.norm(
np.array([temp_obj_dim[0], temp_obj_dim[1]]))
max_diag, max_obj_ID = np.max(np.fabs(other_diag)), np.argmax(
np.fabs(other_diag))
# print '[PushBack] max_obj_ID',max_diag
# print '[PushBack] max_obj_ID', bin_contents[max_obj_ID]
#*******************************************************************
bin_inner_cnstr = get_bin_inner_cnstr()
#*******************************************************************
#Check if we can do left push
diag_factor = 0.75
obj_left_edge = obj_pose_pos[1] + diag_factor * diag_dist / 2.0
binLeftWall = bin_inner_cnstr[binNum][1]
binLeftWall_world = coordinateFrameTransform([binLeftWall, 0, 0], 'shelf',
'map', listener)
binRightWall = bin_inner_cnstr[binNum][0]
binRightWall_world = coordinateFrameTransform([binRightWall, 0, 0],
'shelf', 'map', listener)
left_gap = binLeftWall_world.pose.position.y - obj_left_edge
# print '[PushBack] left_gap=', left_gap
fing_clearance = 0.010 # It's like 5 mm on both sides of finger
bin_width = binLeftWall_world.pose.position.y - binRightWall_world.pose.position.y
tolerance_in_push = 0.020
if left_gap + diag_dist / 2.0 - tolerance_in_push > bin_width:
print '[PushBack] looks like vision has messed up. the object does not seem to be in the appropriate bin'
return (False, False)
if left_gap > fing_width + fing_clearance:
left_push = True
print '[PushBack] left push is possible'
else:
left_push = False
print '[PushBack] left push is NOT possible'
# check if we can do right push
obj_right_edge = obj_pose_pos[1] - diag_factor * diag_dist / 2.0
right_gap = obj_right_edge - binRightWall_world.pose.position.y
# print '[PushBack] right_gap', right_gap
fing_clearance = 0.010 # It's like 5 mm on both sides of finger
if right_gap + diag_dist / 2.0 - tolerance_in_push > bin_width:
print '[PushBack] looks like vision has messed up. the object does not seem to be in the appropriate bin'
return (False, False)
if right_gap > fing_width + fing_clearance:
right_push = True
print '[PushBack] right push is possible'
else:
right_push = False
print '[PushBack] right push is NOT possible'
#*******************************************************************
#Find Push Points for left push
bin_face_pos, binFloorHeight = getBinMouthAndFloor(0.0, binNum)
bin_face_pos_world = coordinateFrameTransform(bin_face_pos, 'shelf', 'map',
listener)
tcp_Z_off = 0.005 #lower down from center of the bin
push_tcp_Z_shelfFrame = (
(bin_inner_cnstr[binNum][4] + bin_inner_cnstr[binNum][5]) /
2.0) - tcp_Z_off
push_tcp_Z_WorldFrame = coordinateFrameTransform(
[0, 0, push_tcp_Z_shelfFrame], 'shelf', 'map', listener)
push_tcp_Z = push_tcp_Z_WorldFrame.pose.position.z
push_side_off = 1.0
if left_push:
left_pushPt_X = bin_face_pos_world.pose.position.x + 0.05
left_pushPt_Y = binLeftWall_world.pose.position.y - push_side_off * left_gap
# left_Y_lim=binLeftWall_world.pose.position.y-
left_pushPt_Z = deepcopy(push_tcp_Z)
left_push_Pt = np.array([left_pushPt_X, left_pushPt_Y, left_pushPt_Z])
print '[PushBack] expected left push clearance=', binLeftWall_world.pose.position.y - left_pushPt_Y - fing_width / 2.0
#Find Push Points for right push
if right_push:
right_pushPt_X = bin_face_pos_world.pose.position.x + 0.05
right_pushPt_Y = binRightWall_world.pose.position.y + push_side_off * right_gap
right_pushPt_Z = deepcopy(push_tcp_Z)
right_push_Pt = np.array(
[right_pushPt_X, right_pushPt_Y, right_pushPt_Z])
print '[PushBack] expected right push clearance=', right_pushPt_Y - binRightWall_world.pose.position.y - fing_width / 2.0
#Execute push trajectories
#~ *************************************************************
# set spatual down orientation (rotate wrist)
spatula_down_orient = [0, 0.7071, 0, 0.7071]
push_orient = spatula_down_orient
push_hand_opening = 0.100
joint_topic = '/joint_states'
#~ *************************************************************
#Execure left push trajectory
if left_push:
# plan store
left_plans = []
# set tcp (same as that set in generate dictionary)
l1 = 0.0
l2 = 0.0
l3 = 0.47
tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br,
pose=tip_hand_transform,
frame_id='tip',
parent_frame_id='link_6',
npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [
mouthPt.pose.position.x, mouthPt.pose.position.y,
mouthPt.pose.position.z
]
gripperOri = [0, 0.7071, 0, 0.7071]
pubFrame(br,
pose=targetPosition + gripperOri,
frame_id='target_pose',
parent_frame_id='link_6',
npub=5)
planner = IK(q0=q_initial,
target_tip_pos=targetPosition,
target_tip_ori=gripperOri,
tip_hand_transform=tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushBack] move to bin mouth in push-back code successful (left push)'
left_plans.append(plan) # Plan 0
else:
print '[PushBack] move to bin mouth in push-back code fail (left push)'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
left_plans.append(grasp_plan)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1 = 0.0
push_l2 = 0.0
push_l3 = 0.47
push_tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br,
pose=push_tip_hand_transform,
frame_id='push_tip',
parent_frame_id='link_6',
npub=10)
distFromShelf = -0.015
InbinPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [
InbinPt.pose.position.x, left_push_Pt[1], InbinPt.pose.position.z
] #matching world_Y of first push pt
pubFrame(br,
pose=prepush_targetPosition + push_orient,
frame_id='target_pose',
parent_frame_id='map',
npub=10)
planner = IK(q0=q_initial,
target_tip_pos=prepush_targetPosition,
target_tip_ori=push_orient,
tip_hand_transform=push_tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] move inside bin in push orient successful'
#~ print '[PushBack] tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
left_plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushBack] move inside bin in push orient fail'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH###############
# Open the gripper to dim calculated for pushing
print '[PushBack] hand opening to'
print push_hand_opening * 1000.0
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
left_plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
back_bin_X = bin_face_pos_world.pose.position.x + 0.43
push_stop_worldX = back_bin_X - max_diag - 0.010
left_pushStop_Pt_pos = deepcopy(left_push_Pt)
left_pushStop_Pt_pos[0] = push_stop_worldX
#Push until the end
planner = IK(q0=q_initial,
target_tip_pos=left_pushStop_Pt_pos,
target_tip_ori=push_orient,
joint_topic=joint_topic,
tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] start point push traj successful'
left_plans.append(plan) # Plan 1
else:
print '[PushBack] start point push traj fail'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
left_plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(left_plans)):
if isExecute:
left_plans[numOfPlan].visualize()
pauseFunc(withPause)
left_plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(left_plans)):
if isExecute:
left_plans[numOfPlan].visualizeBackward()
pauseFunc(withPause)
left_plans[len(left_plans) - numOfPlan - 1].executeBackward()
#*******************************************************************
if right_push:
# plan store
right_plans = []
# set tcp (same as that set in generate dictionary)
l1 = 0.0
l2 = 0.0
l3 = 0.47
tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br,
pose=tip_hand_transform,
frame_id='tip',
parent_frame_id='link_6',
npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [
mouthPt.pose.position.x, mouthPt.pose.position.y,
mouthPt.pose.position.z
]
gripperOri = [0, 0.7071, 0, 0.7071]
pubFrame(br,
pose=targetPosition + gripperOri,
frame_id='target_pose',
parent_frame_id='link_6',
npub=5)
planner = IK(q0=q_initial,
target_tip_pos=targetPosition,
target_tip_ori=gripperOri,
tip_hand_transform=tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushBack] move to bin mouth in push-back code successful (right push)'
right_plans.append(plan) # Plan 0
else:
print '[PushBack] move to bin mouth in push-back code fail (right push)'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
right_plans.append(grasp_plan)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1 = 0.0
push_l2 = 0.0
push_l3 = 0.47
push_tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br,
pose=push_tip_hand_transform,
frame_id='push_tip',
parent_frame_id='link_6',
npub=10)
distFromShelf = -0.015
InbinPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [
InbinPt.pose.position.x, right_push_Pt[1], InbinPt.pose.position.z
] #matching world_Y of first push pt
pubFrame(br,
pose=prepush_targetPosition + push_orient,
frame_id='target_pose',
parent_frame_id='map',
npub=10)
planner = IK(q0=q_initial,
target_tip_pos=prepush_targetPosition,
target_tip_ori=push_orient,
tip_hand_transform=push_tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] move inside bin in push orient successful'
#~ print '[PushBack] tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
right_plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushBack] move inside bin in push orient fail'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH###############
# Open the gripper to dim calculated for pushing
print '[PushBack] hand opening to'
print push_hand_opening * 1000.0
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
right_plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
back_bin_X = bin_face_pos_world.pose.position.x + 0.42
push_stop_worldX = back_bin_X - max_diag - 0.010
right_pushStop_Pt_pos = deepcopy(right_push_Pt)
right_pushStop_Pt_pos[0] = push_stop_worldX
#Push until the end
planner = IK(q0=q_initial,
target_tip_pos=right_pushStop_Pt_pos,
target_tip_ori=push_orient,
joint_topic=joint_topic,
tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] start point push traj successful'
right_plans.append(plan) # Plan 1
else:
print '[PushBack] start point push traj fail'
return (False, False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
right_plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(right_plans)):
if isExecute:
right_plans[numOfPlan].visualize()
pauseFunc(withPause)
right_plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(right_plans)):
if isExecute:
right_plans[numOfPlan].visualizeBackward()
pauseFunc(withPause)
right_plans[len(right_plans) - numOfPlan - 1].executeBackward()
if right_push or left_push:
push_possible = True
else:
push_possible = False
return (push_possible, False)
def suction_side(objPose = [1.95,1.25,1.4,0,0,0,1],
binNum=4,
objId = 0,
bin_contents = None,
robotConfig = None,
shelfPosition = [1.9019,0.00030975,-0.503],
forceThreshold = 1,
isExecute = True,
withPause = False):
## objPose: world position and orientation frame attached to com of object in quaternion form. XYZ
## objId: object identifier
## robotConfig: current time robot configuration
## shelfPosition: shelf position in world frame
## force threshold: amount fo force needed to say we have a grasp
joint_topic = '/joint_states'
## initialize listener rospy
listener = tf.TransformListener()
#rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
# shelf variables
pretensionDelta = 0.00
lipHeight = 0.035
#tcp_offset_variables
# plan store
plans = []
## get object position (world frame)
objPosition = getObjCOM(objPose[0:3], objId)
obj_pose_tfm_list=matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm=np.array(obj_pose_tfm_list)
obj_pose_orient=obj_pose_tfm[0:3,0:3]
vertical_index=np.argmax(np.fabs(obj_pose_orient[2,0:3]))
object_dim=get_obj_dim(objId)
vertical_dim=object_dim[vertical_index]
s1=np.fabs(obj_pose_orient[1,0])*object_dim[0]
s2=np.fabs(obj_pose_orient[1,1])*object_dim[1]
s3=np.fabs(obj_pose_orient[1,2])*object_dim[2]
s4=np.fabs(obj_pose_orient[1,vertical_index])*object_dim[vertical_index]
horizontal_dim=s1+s2+s3-s4
hand_gap=0
gripper.close()
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic, sensor_msgs.msg.JointState).getmsg()
q0 = APCrobotjoints.position
if len(q0) < 6:
continue
else:
break
## move gripper to object com outside bin along world y direction and
## move the gripper over the lip of the bin
# set tcp
vert_offset=.035
l2 = 0.43 #change this to edit where you think the cup is
l2 =.44
tip_hand_transform = [-vert_offset, 0, l2, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
# for i in range(5):
# rospy.sleep(0.1)
# br.sendTransform(tuple(tip_hand_transform[0:3]), tfm.quaternion_from_euler(*tip_hand_transform[3:6]), rospy.Time.now(), 'tip', "link_6")
# rospy.sleep(0.1)
pubFrame(br, pose=tip_hand_transform, frame_id='target_pose', parent_frame_id='tip', npub=1)
# get position of the tcp in world frame
pose_world = coordinateFrameTransform(tip_hand_transform[0:3], 'link_6', 'map', listener)
tcpPos=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
#this may cause issues!!!
tcpPosHome = tcpPos
# set scoop orientation (rotate wrist)
distFromShelf = 0.05
wristWidth = 0.0725 # this is actually half the wrist width
(binMouth,bin_height,bin_width) = getBinMouth(distFromShelf, binNum)
pose_world = coordinateFrameTransform(binMouth[0:3], 'shelf', 'map', listener)
binMouth=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
object_depth=objPosition[0]-binMouth[0]
finger_length=.23
finger_width=.08
up_offset=.05
down_offset=.01
cup_to_spatula=.08
hand_width=.15
max_gripper_width=.110
hand_top_offset=hand_width/2+vert_offset+.015
hand_bot_offset=hand_width/2-vert_offset+.015
up_down_adjust=.025
side_offset=.03
binFloorHeight=binMouth[2]-bin_height/2
binCeilHeight=binMouth[2]+bin_height/2
min_height=binFloorHeight+lipHeight+finger_width/2+down_offset
desired_height=objPosition[2]
max_height=binCeilHeight-lipHeight-finger_width/2-down_offset-up_down_adjust
target_height=desired_height
if target_height<min_height:
target_height=min_height
if target_height>max_height:
target_height=max_height
bin_sideways=binMouth[1]
sidepos=objPosition[1]
horz_offset=0.01
#this determines bin sides based on object
#(binSmall,binLarge)=getSides(objPosition[1],listener)
(binSmall,binLarge)=getSides(binNum,listener)
binRight=binSmall
binLeft=binLarge
if sidepos>bin_sideways:
#this stuff is what happens if the object is to the left
print '[SucSide] Object is to the left'
#turn the suction cup so that it is sideways left
scoopOrientation = [.5,-.5,.5,-.5]
side_waypoint1a=binRight+cup_to_spatula+.01
side_waypoint1b=sidepos-horizontal_dim/2-2*horz_offset
if side_waypoint1a>side_waypoint1b:
side_waypoint1=side_waypoint1a
print '[SucSide] side waypoint A'
else:
side_waypoint1=side_waypoint1b
print '[SucSide] side waypoint B'
#side_waypoint2=sidepos+horizontal_dim-side_offset
side_waypoint2=binLeft-horizontal_dim-horz_offset
if side_waypoint2<side_waypoint1:
if side_waypoint2<side_waypoint1a:
print '[SucSide] Not enought gap'
return (False, False)
else:
side_waypoint1=side_waypoint2
else:
#this stuff is what happens if the object is to the right
print '[SucSide] Object is to the right'
#turn the suction cup so that it is sideways right
scoopOrientation = [0.5,.5,.5,.5]
side_waypoint1a=binLeft-cup_to_spatula-.01
side_waypoint1b=sidepos+horizontal_dim/2+2*horz_offset
if side_waypoint1a<side_waypoint1b:
side_waypoint1=side_waypoint1a
print '[SucSide] side waypoint A'
else:
side_waypoint1=side_waypoint1b
print '[SucSide] side waypoint B'
#side_waypoint2=sidepos-horizontal_dim+side_offset
side_waypoint2=binRight+horizontal_dim+horz_offset
if side_waypoint2>side_waypoint1:
if side_waypoint2>side_waypoint1a:
print '[SucSide] Not enought gap'
return (False, False)
else:
side_waypoint1=side_waypoint2
targetPositionList=[
[binMouth[0]-.15, side_waypoint1, target_height+up_down_adjust],
[objPosition[0], side_waypoint1, target_height+up_down_adjust],
[objPosition[0], side_waypoint2, target_height+up_down_adjust],
[objPosition[0], side_waypoint2, target_height]]
qf=q0
for tp_index in range(0, len(targetPositionList)):
targetPosition = targetPositionList[tp_index]
frontOfObjectPtOutOfBin = targetPosition
q_initial = qf
planner = IK(q0 = q_initial, target_tip_pos = targetPosition, target_tip_ori = scoopOrientation, tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
if s:
print '[SucSide] move to COM in y successful'
print '[SucSide] tcp at:', targetPosition
plan.visualize(hand_param=hand_gap)
plans.append(plan)
#if isExecute:
# pauseFunc(withPause)
# plan.execute()
else:
print '[SucSide] move to COM in y fail'
return (False, False)
#print plan.q_traj
qf = plan.q_traj[-1]
print '[SucSide] qf:', qf
#set robot speed
setSpeedByName(speedName = 'faster')
for numOfPlan in range(0, len(plans)):
if numOfPlan >=len(plans)-2:
setSpeedByName(speedName = 'fast')
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
suction.start()
final_hand_gap=110
gripper.set_force(12)
gripper.grasp(move_pos=final_hand_gap)
gripper.close()
hand_gap=final_hand_gap
print '[SucSide] hand_gap:', hand_gap
continue_suction=suction_items(objId)
if continue_suction:
print '[SucSide] object is of type that suction side will try to remove from bin'
else:
print '[SucSide] object is to big to remove from bin'
## retreat
for numOfPlan in range(0, len(plans)-1):
plans[len(plans)-numOfPlan-1].visualizeBackward(hand_param=hand_gap)
if isExecute:
pauseFunc(withPause)
plans[len(plans)-numOfPlan-1].executeBackward()
if not continue_suction:
suction.stop()
rospy.sleep(3)
print '[SucSide] Is suction in contact still? Lets see:'
print '[SucSide] suction.check(): ', suction.check()
print '[SucSide] suction.check(): ', suction.check()
if suction.check():
#set robot speed
print '[SucSide] got item. continuing. suction'
setSpeedByName(speedName = 'fast')
return (True, True)
else:
print '[SucSide] did not get item. Stopping suction'
suction.stop()
return (True, False)
def flush_grasp(objPose = [1.95,1.25,1.4,0,0,0,1],
binNum=4,
objId = 0,
bin_contents = None,
robotConfig = None,
forceThreshold = 1,
isExecute = True,
withPause = False):
## objPose: world position and orientation frame attached to com of object in quaternion form. XYZ
## objId: object identifier
## robotConfig: current time robot configuration
## shelfPosition: shelf position in world frame
## force threshold: amount fo force needed to say we have a grasp
joint_topic = '/joint_states'
## initialize listener rospy
listener = tf.TransformListener()
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
# shelf variables
pretensionDelta = 0.00
lipHeight = 0.035
#tcp_offset_variables
#set robot speed
setSpeedByName(speedName = 'fast')
# plan store
plans = []
## get object position (world frame)
objPosition = getObjCOM(objPose[0:3], objId)
obj_pose_tfm_list=matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm=np.array(obj_pose_tfm_list)
obj_pose_orient=obj_pose_tfm[0:3,0:3]
vertical_index=np.argmax(np.fabs(obj_pose_orient[2,0:3]))
object_dim=get_obj_dim(objId)
vertical_dim=object_dim[vertical_index]
s1=np.fabs(obj_pose_orient[1,0])*object_dim[0]
s2=np.fabs(obj_pose_orient[1,1])*object_dim[1]
s3=np.fabs(obj_pose_orient[1,2])*object_dim[2]
s4=np.fabs(obj_pose_orient[1,vertical_index])*object_dim[vertical_index]
horizontal_dim=s1+s2+s3-s4
hand_gap=0
gripper.close()
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic, sensor_msgs.msg.JointState).getmsg()
q0 = APCrobotjoints.position
if len(q0) < 6:
continue
else:
break
## move gripper to object com outside bin along world y direction and
## move the gripper over the lip of the bin
# set tcp
vert_offset=.035
l2 = 0.43 #change this to edit where you think the cup is
l2 =.44
tip_hand_transform = [-vert_offset, 0, l2, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
# for i in range(5):
# rospy.sleep(0.1)
# br.sendTransform(tuple(tip_hand_transform[0:3]), tfm.quaternion_from_euler(*tip_hand_transform[3:6]), rospy.Time.now(), 'tip', "link_6")
# rospy.sleep(0.1)
pubFrame(br, pose=tip_hand_transform, frame_id='tip', parent_frame_id='link_6', npub=5)
# get position of the tcp in world frame
pose_world = coordinateFrameTransform(tip_hand_transform[0:3], 'link_6', 'map', listener)
tcpPos=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
#this may cause issues!!!
tcpPosHome = tcpPos
# set scoop orientation (rotate wrist)
distFromShelf = 0.05
wristWidth = 0.0725 # this is actually half the wrist width
(binMouth,bin_height,bin_width) = getBinMouth(distFromShelf, binNum)
pose_world = coordinateFrameTransform(binMouth[0:3], 'shelf', 'map', listener)
binMouth=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
object_depth=objPosition[0]-binMouth[0]
finger_length=.23
finger_width=.06
up_offset=.05
down_offset=0.005
cup_to_spatula=.08
hand_width=.15
max_gripper_width=.110
hand_top_offset=hand_width/2+vert_offset+.03
hand_bot_offset=hand_width/2-vert_offset+.015
side_offset=.03
binFloorHeight=binMouth[2]-bin_height/2
binCeilHeight=binMouth[2]+bin_height/2
min_height=binFloorHeight+lipHeight+finger_width/2+down_offset
desired_height=objPosition[2]
max_height=binCeilHeight-lipHeight-finger_width/2-down_offset
target_height=desired_height
if target_height<min_height:
target_height=min_height
if target_height>max_height:
target_height=max_height
bin_sideways=binMouth[1]
sidepos=objPosition[1]
horz_offset=0.015
#this determines bin sides based on bin input
binSmall=binMouth[1]-bin_width/2
binLarge=binMouth[1]+bin_width/2
#this determines bin sides based on object
#(binSmall,binLarge)=getSides(objPosition[1],listener)
binRight=binSmall
binLeft=binLarge
final_hand_gap=110
if sidepos>bin_sideways:
#this stuff is what happens if the object is to the left
print 'Object is to the left'
if binNum==0 or binNum==3 or binNum==6 or binNum==9:
print 'Object is in that weird rail corner'
return False
#turn the suction cup so that it is sideways left
#scoopOrientation = [.5,-.5,.5,-.5]
scoopOrientation = [0.5,.5,.5,.5]
#side_waypoint1=binRight+cup_to_spatula+.01
#side_waypoint2=sidepos+horizontal_dim-side_offset
#side_waypoint2=binLeft-horizontal_dim-horz_offset
side_waypoint1=binLeft-hand_top_offset+horz_offset
if sidepos-horizontal_dim<binLeft-final_hand_gap:
print 'this is not a flush object'
return False
else:
#this stuff is what happens if the object is to the right
print 'Object is to the right'
if binNum==2 or binNum==5 or binNum==8 or binNum==11:
print 'Object is in that weird rail corner'
return False
#turn the suction cup so that it is sideways right
#scoopOrientation = [0.5,.5,.5,.5]
scoopOrientation = [.5,-.5,.5,-.5]
#side_waypoint1=binLeft-cup_to_spatula-.01
#side_waypoint2=sidepos-horizontal_dim+side_offset
#side_waypoint2=binRight+horizontal_dim+horz_offset
side_waypoint1=binRight+hand_top_offset-horz_offset
if sidepos+horizontal_dim>binRight+final_hand_gap:
print 'this is not a flush object'
return False
targetPositionList=[
[binMouth[0]-.15, side_waypoint1, min_height],
[binMouth[0]+.04, side_waypoint1, min_height],
[binMouth[0]+.3, side_waypoint1, min_height],
[binMouth[0]+.3, side_waypoint1, min_height+.03],
[binMouth[0]-.1, side_waypoint1, min_height+.03]]
qf=q0
for tp_index in range(0, len(targetPositionList)):
targetPosition = targetPositionList[tp_index]
frontOfObjectPtOutOfBin = targetPosition
q_initial = qf
planner = IK(q0 = q_initial, target_tip_pos = targetPosition, target_tip_ori = scoopOrientation, tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
if s:
print 'move to COM in y successful'
print 'tcp at:'
print(targetPosition)
#plan.visualize(hand_param=hand_gap)
plans.append(plan)
#if isExecute:
# pauseFunc(withPause)
# plan.execute()
else:
print 'move to COM in y fail'
return False
#print plan.q_traj
qf = plan.q_traj[-1]
print qf
for numOfPlan in range(0, 2):
if isExecute:
plans[numOfPlan].visualize(hand_param=final_hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
#time.sleep(2.5)
#suction.start()
final_hand_gap=110
gripper.set_force(20)
gripper.grasp(move_pos=final_hand_gap)
for numOfPlan in range(2, 3):
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
gripper.set_force(50)
rospy.sleep(0.1)
gripper.move(move_pos=0)
hand_gap=final_hand_gap
print hand_gap
## retreat
#for numOfPlan in range(0, len(plans)-1):
# plans[len(plans)-numOfPlan-1].visualizeBackward(hand_param=hand_gap)
# if isExecute:
# pauseFunc(withPause)
# plans[len(plans)-numOfPlan-1].executeBackward()
# suction.stop()
for numOfPlan in range(3, len(plans)):
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
return True
pose = get_obj_capsentf(obj_id) # x,y,z,qx,qy,qz,qw
if len(pose) <7:
pose = [0,0,0,0,0,0,1]
#pdb.set_trace()
# create an interactive marker server on the topic namespace simple_marker
server = InteractiveMarkerServer("affordance_marker")
int_marker = createInteractiveMarker('Object',*pose)
pointmarker = createPointMarker(colors=colors, points=points, offset=tuple(pose[0:3]), orientation=tuple(pose[3:7]))
int_marker.controls.append(pointmarker)
int_marker.controls.extend(createMoveControls(fixed=True))
#### create a static marker
dim = get_obj_dim(obj_id)
for i in range(5):
vizCubeMarker(size=dim, rgba=(0,1,0,0.3))
server.insert(int_marker, processFeedback)
rospy.Timer(rospy.Duration(0.01), frameCallback)
server.applyChanges()
# ros services
#startPoseService()
rospy.spin()
def suction_down(objPose = [1.95,1.25,1.4,0,0,0,1],
binNum=4,
objId = 0,
bin_contents = None,
robotConfig = None,
shelfPosition = [1.9019,0.00030975,-0.503],
forceThreshold = 1,
isExecute = True,
withPause = False):
## objPose: world position and orientation frame attached to com of object in quaternion form. XYZ
## objId: object identifier
## robotConfig: current time robot configuration
## shelfPosition: shelf position in world frame
## force threshold: amount fo force needed to say we have a grasp
joint_topic = '/joint_states'
## initialize listener rospy
listener = tf.TransformListener()
rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
# shelf variables
pretensionDelta = 0.00
lipHeight = 0.035
## get object position (world frame)
objPosition = getObjCOM(objPose[0:3], objId)
obj_pose_tfm_list=matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm=np.array(obj_pose_tfm_list)
obj_pose_orient=obj_pose_tfm[0:3,0:3]
vertical_index=np.argmax(np.fabs(obj_pose_orient[2,0:3]))
object_dim=get_obj_dim(objId)
object_dim=adjust_obj_dim(objId,object_dim)
vertical_dim=object_dim[vertical_index]
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic, sensor_msgs.msg.JointState).getmsg()
q0 = APCrobotjoints.position
if len(q0) < 6:
continue
else:
break
## move gripper to object com outside bin along world y direction and
## move the gripper over the lip of the bin
# set tcp
vert_offset=.035
l2 =.44
tip_hand_transform = [-vert_offset, 0, l2, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br, pose=tip_hand_transform, frame_id='tip', parent_frame_id='link_6', npub=5)
# get position of the tcp in world frame
pose_world = coordinateFrameTransform(tip_hand_transform[0:3], 'link_6', 'map', listener)
tcpPos=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
#this may cause issues!!!
tcpPosHome = tcpPos
# set scoop orientation (rotate wrist)
scoopOrientation = [0.7071, 0, 0.7071,0]
distFromShelf = 0.05
wristWidth = 0.0725 # this is actually half the wrist width
(binMouth,bin_height,bin_width) = getBinMouth(distFromShelf, binNum)
pose_world = coordinateFrameTransform(binMouth[0:3], 'shelf', 'map', listener)
binMouth=[pose_world.pose.position.x, pose_world.pose.position.y, pose_world.pose.position.z]
finger_length=.23
finger_width=.08
up_offset=.05
down_offset=-.025
cup_to_spatula=.08
hand_width=.15
max_gripper_width=110
hand_top_offset=hand_width/2+vert_offset+.01
hand_bot_offset=hand_width/2-vert_offset
#this determines bin stuff based on bin input
binFloorHeight=binMouth[2]-bin_height/2
binCeilHeight=binMouth[2]+bin_height/2
#this determines bin sides based on object
(binSmall,binLarge)=getSides(objPosition[1],listener)
horz_offset=0
small_limit=binSmall+finger_width/2+horz_offset
large_limit=binLarge-finger_width/2-horz_offset
plans = []
plan = Plan()
if objPosition[1]<0:
link6_angle=(q0[5]-math.pi)
possible_start_config=[0.007996209289, -0.6193283503, 0.5283758664, -0.1974229539, 0.09102420595, 3.33888627518-2*math.pi]
else:
link6_angle=(q0[5]+math.pi)
possible_start_config=[0.007996209289, -0.6193283503, 0.5283758664, -0.1974229539, 0.09102420595, 3.33888627518]
#start_config=possible_start_config
start_config=[q0[0],q0[1],q0[2],q0[3],q0[4],link6_angle];
plan.q_traj=[q0,start_config]
plans.append(plan)
qf=plan.q_traj[-1]
def try_suction(target_x,target_y,qf,num_iter):
object_depth=target_x-binMouth[0]
sidepos=min(max(target_y,small_limit),large_limit)
if object_depth<finger_length:
print 'shallow suction'
h1=binCeilHeight-lipHeight-cup_to_spatula
h2=binFloorHeight+vertical_dim-down_offset
else:
print 'deep suction'
h1=binCeilHeight-lipHeight-hand_top_offset
h2a=binFloorHeight+vertical_dim-down_offset
h2b=binFloorHeight+hand_bot_offset+lipHeight
h2=max(h2a,h2b)
h2=max(h2,binFloorHeight)
if h2>h1:
print 'cant go in'
return False, False
final_hand_gap=max_gripper_width
targetPositionList=[
[binMouth[0]-.15, sidepos, h1],
[target_x, sidepos, h1],
[target_x, sidepos, h2]]
for tp_index in range(0, len(targetPositionList)):
targetPosition = targetPositionList[tp_index]
planner = IK(q0 = qf, target_tip_pos = targetPosition, target_tip_ori = scoopOrientation,
tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
print 'Plan number:',tp_index+1
if s:
print 'Plan calculated successfully'
plans.append(plan)
else:
print 'Plan calulation failed'
return (False, False)
qf = plan.q_traj[-1]
#set robot speed
setSpeedByName(speedName = 'faster')
hand_gap=0
gripper.close()
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
suction.start()
gripper.set_force(10)
gripper.grasp(move_pos=max_gripper_width)
gripper.close()
hand_gap=max_gripper_width
print hand_gap
## retreat
if num_iter==0:
plan_offset=2
else:
plan_offset=0
for numOfPlan in range(0, len(plans)-plan_offset):
plans[len(plans)-numOfPlan-1].visualizeBackward(hand_param=hand_gap)
if isExecute:
#backward_plan=plans[len(plans)-numOfPlan-1]
#q_first=backward_plan[0]
#q_last=backward_plan[len(backward_plan)-1]
#if(abs(q_first[5]-q_last[5])>math.pi/2):
# print 'something weird is going on with joint 5 rotation'
# break
pauseFunc(withPause)
plans[len(plans)-numOfPlan-1].executeBackward()
time.sleep(4)
my_return=suction.check() or suction_override(objId)
if my_return==True:
#set robot speed
setSpeedByName(speedName = 'fast')
return (True, True)
else:
suction.stop()
return (True, False)
target_offset=get_test_offset(objId)
target_x_list=[objPosition[0],objPosition[0]-target_offset,objPosition[0],objPosition[0],objPosition[0]+target_offset]
target_y_list=[objPosition[1],objPosition[1],objPosition[1]+target_offset,objPosition[1]-target_offset,objPosition[1]]
count=0
suction_succeed=False
overall_plan_succeed=False
for count in range(0,len(target_x_list)):
(plan_succeed,suction_succeed)=try_suction(target_x=target_x_list[count],target_y=target_y_list[count],qf=qf,num_iter=count)
if suction_succeed:
return (plan_succeed,suction_succeed)
if plan_succeed==True:
overall_plan_succeed=True
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic, sensor_msgs.msg.JointState).getmsg()
qf = APCrobotjoints.position
if len(qf) < 6:
continue
else:
break
print qf
plans=[]
count=count+1
return (overall_plan_succeed,suction_succeed)
def push_back(objPose=[1.95,0.25,1.4,0,0,0,1],
binNum=4,
objId = 'crayola_64_ct',
bin_contents = ['paper_mate_12_count_mirado_black_warrior','crayola_64_ct','expo_dry_erase_board_eraser'],
robotConfig = None,
grasp_range_lim=0.11,
fing_width=0.06,
isExecute = True,
withPause = True):
#~ *****************************************************************
obj_dim=get_obj_dim(objId)
obj_dim=np.array(obj_dim)
#~ *****************************************************************
# # DEFINE HAND WIDTH#########################
hand_width=0.186
#~ *****************************************************************
## initialize listener rospy
listener = tf.TransformListener()
rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
(shelf_position, shelf_quaternion) = lookupTransform("map", "shelf", listener)
# print shelf_position, shelf_quaternion
#~ *****************************************************************
# Convert xyx quat to tranformation matrix for Shelf frame
#~ shelf_pose_tfm_list=matrix_from_xyzquat(shelfPose[0:3], shelfPose[3:7])
shelf_pose_tfm_list=matrix_from_xyzquat(shelf_position,shelf_quaternion)
shelf_pose_tfm=np.array(shelf_pose_tfm_list)
shelf_pose_orient=shelf_pose_tfm[0:3,0:3]
#~ print '[PushBack] shelf_pose_orient'
#~ print shelf_pose_orient
shelf_pose_pos=shelf_pose_tfm[0:3,3]
#~ print '[PushBack] shelf_pose_pos'
#~ print shelf_pose_pos
#Normalized axes of the shelf frame
shelf_X=shelf_pose_orient[:,0]/la.norm(shelf_pose_orient[:,0])
shelf_Y=shelf_pose_orient[:,1]/la.norm(shelf_pose_orient[:,1])
shelf_Z=shelf_pose_orient[:,2]/la.norm(shelf_pose_orient[:,2])
#~ *****************************************************************
# Convert xyx quat to tranformaation matrix for Object frame
obj_pose_tfm_list=matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm=np.array(obj_pose_tfm_list)
obj_pose_orient=obj_pose_tfm[0:3,0:3]
obj_pose_pos=obj_pose_tfm[0:3,3]
#~ print '[PushBack] obj_pose_orient'
#~ print obj_pose_orient
#Normalized axes of the object frame
obj_X=obj_pose_orient[:,0]/la.norm(obj_pose_orient[:,0])
#~ print '[PushBack] obj_X'
#~ print obj_X
obj_Y=obj_pose_orient[:,1]/la.norm(obj_pose_orient[:,1])
#~ print '[PushBack] obj_Y'
#~ print obj_Y
obj_Z=obj_pose_orient[:,2]/la.norm(obj_pose_orient[:,2])
#~ print '[PushBack] obj_Z'
#~ print obj_Z
#Normalized object frame
obj_pose_orient_norm=np.vstack((obj_X,obj_Y,obj_Z))
obj_pose_orient_norm=obj_pose_orient_norm.transpose()
#~ print '[PushBack] obj_pose_orient_norm'
#~ print obj_pose_orient_norm
#~ *****************************************************************
# We will assume that hand normal tries to move along object dimension along the Y axis of the shelf (along the lenght of the bin)
# Find projection of object axes on Y axis of the shelf frame
proj_vecY=np.dot(shelf_Y,obj_pose_orient_norm)
#~ print '[PushBack] proj'
#~ print proj_vecY
max_proj_valY,hand_norm_dir=np.max(np.fabs(proj_vecY)), np.argmax(np.fabs(proj_vecY))
if proj_vecY[hand_norm_dir]>0:
hand_norm_vec=-obj_pose_orient_norm[:,hand_norm_dir]
else:
hand_norm_vec=obj_pose_orient_norm[:,hand_norm_dir]
#~ print '[PushBack] hand_norm_vec'
#~ print hand_norm_vec
#Find angle of the edge of the object
Cos_angle_made_with_shelf_Y=max_proj_valY/(la.norm(shelf_Y)*la.norm(hand_norm_vec));
angle_to_shelfY=np.arccos(Cos_angle_made_with_shelf_Y)*180/np.pi
#~ print'angle_to_shelfY'
#~ print angle_to_shelfY
#Find object dimension along hand normal axis
obj_dim_along_hand_norm=obj_dim[hand_norm_dir]
# print '[PushBack] dim along hand norm'
# print obj_dim_along_hand_norm
#~ *****************************************************************
#Find projection of object axes on X axis of the shelf frame
#To find out which object frame is lying closer to the X axis of the shelf
proj_vecX=np.dot(shelf_X,obj_pose_orient_norm)
max_proj_valX,fing_axis_dir=np.max(np.fabs(proj_vecX)), np.argmax(np.fabs(proj_vecX))
if proj_vecX[fing_axis_dir]>0:
fing_axis_vec=obj_pose_orient_norm[:,fing_axis_dir]
else:
fing_axis_vec=-obj_pose_orient_norm[:,fing_axis_dir]
#~ print '[PushBack] fing_axis_vec'
#~ print fing_axis_vec
#Find object dimension along the finger axis
obj_dim_along_fingAxis=obj_dim[fing_axis_dir]
# print '[PushBack] obj_dim_along_fingAxis'
# print obj_dim_along_fingAxis
#~ *****************************************************************
#Find projection of object axes on Z axis of the shelf frame
#To find out which object frame is lying closer to the Z axis of the shelf
proj_vecZ=np.dot(shelf_Z,obj_pose_orient_norm)
max_proj_valZ,Zaxis_dir=np.max(np.fabs(proj_vecZ)), np.argmax(np.fabs(proj_vecZ))
Zaxis_vec=obj_pose_orient_norm[:,Zaxis_dir]
#~ print '[PushBack] Zaxis_vec'
#~ print Zaxis_vec
#Find object dimension along the finger axis, shelf Z
obj_dim_along_ZAxis=obj_dim[Zaxis_dir]
hand_Y=np.cross(hand_norm_vec,fing_axis_vec)
diag_dist=la.norm(np.array([obj_dim_along_hand_norm,obj_dim_along_fingAxis]))
# print'req obj diag dist=', diag_dist
#~ *****************************************************************
# Find the maximum distance to which we will push
other_diag=np.zeros(len(bin_contents))
for num_bin_contents in range(0, len(bin_contents)):
if bin_contents[num_bin_contents] != objId:
temp_obj_dim=get_obj_dim(objId)
other_diag[num_bin_contents]=la.norm(np.array([temp_obj_dim[0],temp_obj_dim[1]]))
max_diag,max_obj_ID=np.max(np.fabs(other_diag)), np.argmax(np.fabs(other_diag))
# print '[PushBack] max_obj_ID',max_diag
# print '[PushBack] max_obj_ID', bin_contents[max_obj_ID]
#*******************************************************************
bin_inner_cnstr=get_bin_inner_cnstr()
#*******************************************************************
#Check if we can do left push
diag_factor=0.75
obj_left_edge=obj_pose_pos[1]+diag_factor*diag_dist/2.0
binLeftWall=bin_inner_cnstr[binNum][1]
binLeftWall_world = coordinateFrameTransform([binLeftWall,0,0], 'shelf', 'map', listener)
binRightWall=bin_inner_cnstr[binNum][0]
binRightWall_world = coordinateFrameTransform([binRightWall,0,0], 'shelf', 'map', listener)
left_gap=binLeftWall_world.pose.position.y-obj_left_edge
# print '[PushBack] left_gap=', left_gap
fing_clearance=0.010 # It's like 5 mm on both sides of finger
bin_width=binLeftWall_world.pose.position.y-binRightWall_world.pose.position.y
tolerance_in_push=0.020
if left_gap+diag_dist/2.0-tolerance_in_push>bin_width:
print '[PushBack] looks like vision has messed up. the object does not seem to be in the appropriate bin'
return (False,False)
if left_gap > fing_width+fing_clearance:
left_push=True
print '[PushBack] left push is possible'
else:
left_push=False
print '[PushBack] left push is NOT possible'
# check if we can do right push
obj_right_edge=obj_pose_pos[1]-diag_factor*diag_dist/2.0
right_gap=obj_right_edge-binRightWall_world.pose.position.y
# print '[PushBack] right_gap', right_gap
fing_clearance=0.010 # It's like 5 mm on both sides of finger
if right_gap+diag_dist/2.0-tolerance_in_push>bin_width:
print '[PushBack] looks like vision has messed up. the object does not seem to be in the appropriate bin'
return (False,False)
if right_gap > fing_width+fing_clearance:
right_push=True
print '[PushBack] right push is possible'
else:
right_push=False
print '[PushBack] right push is NOT possible'
#*******************************************************************
#Find Push Points for left push
bin_face_pos,binFloorHeight=getBinMouthAndFloor(0.0, binNum)
bin_face_pos_world = coordinateFrameTransform(bin_face_pos, 'shelf', 'map', listener)
tcp_Z_off=0.005 #lower down from center of the bin
push_tcp_Z_shelfFrame=((bin_inner_cnstr[binNum][4]+bin_inner_cnstr[binNum][5])/2.0)-tcp_Z_off
push_tcp_Z_WorldFrame = coordinateFrameTransform([0,0,push_tcp_Z_shelfFrame], 'shelf', 'map', listener)
push_tcp_Z=push_tcp_Z_WorldFrame.pose.position.z
push_side_off=1.0
if left_push:
left_pushPt_X=bin_face_pos_world.pose.position.x+0.05
left_pushPt_Y=binLeftWall_world.pose.position.y-push_side_off*left_gap
# left_Y_lim=binLeftWall_world.pose.position.y-
left_pushPt_Z=deepcopy(push_tcp_Z)
left_push_Pt=np.array([left_pushPt_X,left_pushPt_Y,left_pushPt_Z])
print '[PushBack] expected left push clearance=',binLeftWall_world.pose.position.y-left_pushPt_Y-fing_width/2.0
#Find Push Points for right push
if right_push:
right_pushPt_X=bin_face_pos_world.pose.position.x+0.05
right_pushPt_Y=binRightWall_world.pose.position.y+push_side_off*right_gap
right_pushPt_Z=deepcopy(push_tcp_Z)
right_push_Pt=np.array([right_pushPt_X,right_pushPt_Y,right_pushPt_Z])
print '[PushBack] expected right push clearance=',right_pushPt_Y-binRightWall_world.pose.position.y-fing_width/2.0
#Execute push trajectories
#~ *************************************************************
# set spatual down orientation (rotate wrist)
spatula_down_orient = [0, 0.7071, 0, 0.7071]
push_orient=spatula_down_orient
push_hand_opening=0.100
joint_topic = '/joint_states'
#~ *************************************************************
#Execure left push trajectory
if left_push:
# plan store
left_plans = []
# set tcp (same as that set in generate dictionary)
l1=0.0
l2=0.0
l3 = 0.47
tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br, pose=tip_hand_transform, frame_id='tip', parent_frame_id='link_6', npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [mouthPt.pose.position.x, mouthPt.pose.position.y, mouthPt.pose.position.z]
gripperOri=[0, 0.7071, 0, 0.7071]
pubFrame(br, pose = targetPosition+gripperOri, frame_id='target_pose', parent_frame_id='link_6', npub=5)
planner = IK(q0 = q_initial, target_tip_pos = targetPosition, target_tip_ori = gripperOri, tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushBack] move to bin mouth in push-back code successful (left push)'
left_plans.append(plan) # Plan 0
else:
print '[PushBack] move to bin mouth in push-back code fail (left push)'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
left_plans.append(grasp_plan)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1=0.0
push_l2=0.0
push_l3 = 0.47
push_tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br, pose=push_tip_hand_transform, frame_id='push_tip', parent_frame_id='link_6', npub=10)
distFromShelf = -0.015
InbinPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [InbinPt.pose.position.x, left_push_Pt[1] , InbinPt.pose.position.z] #matching world_Y of first push pt
pubFrame(br, pose=prepush_targetPosition+push_orient, frame_id='target_pose', parent_frame_id='map', npub=10)
planner = IK(q0 = q_initial, target_tip_pos = prepush_targetPosition, target_tip_ori = push_orient, tip_hand_transform=push_tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] move inside bin in push orient successful'
#~ print '[PushBack] tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
left_plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushBack] move inside bin in push orient fail'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH###############
# Open the gripper to dim calculated for pushing
print '[PushBack] hand opening to'
print push_hand_opening*1000.0
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
left_plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
back_bin_X=bin_face_pos_world.pose.position.x+0.43
push_stop_worldX=back_bin_X-max_diag-0.010
left_pushStop_Pt_pos=deepcopy(left_push_Pt)
left_pushStop_Pt_pos[0]=push_stop_worldX
#Push until the end
planner = IK(q0 = q_initial, target_tip_pos = left_pushStop_Pt_pos, target_tip_ori = push_orient,
joint_topic=joint_topic, tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] start point push traj successful'
left_plans.append(plan) # Plan 1
else:
print '[PushBack] start point push traj fail'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
left_plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(left_plans)):
if isExecute:
left_plans[numOfPlan].visualize()
pauseFunc(withPause)
left_plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(left_plans)):
if isExecute:
left_plans[numOfPlan].visualizeBackward()
pauseFunc(withPause)
left_plans[len(left_plans)-numOfPlan-1].executeBackward()
#*******************************************************************
if right_push:
# plan store
right_plans = []
# set tcp (same as that set in generate dictionary)
l1=0.0
l2=0.0
l3 = 0.47
tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br, pose=tip_hand_transform, frame_id='tip', parent_frame_id='link_6', npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [mouthPt.pose.position.x, mouthPt.pose.position.y, mouthPt.pose.position.z]
gripperOri=[0, 0.7071, 0, 0.7071]
pubFrame(br, pose = targetPosition+gripperOri, frame_id='target_pose', parent_frame_id='link_6', npub=5)
planner = IK(q0 = q_initial, target_tip_pos = targetPosition, target_tip_ori = gripperOri, tip_hand_transform=tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushBack] move to bin mouth in push-back code successful (right push)'
right_plans.append(plan) # Plan 0
else:
print '[PushBack] move to bin mouth in push-back code fail (right push)'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
right_plans.append(grasp_plan)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1=0.0
push_l2=0.0
push_l3 = 0.47
push_tip_hand_transform = [l1, l2, l3, 0,0,0] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br, pose=push_tip_hand_transform, frame_id='push_tip', parent_frame_id='link_6', npub=10)
distFromShelf = -0.015
InbinPt,temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [InbinPt.pose.position.x, right_push_Pt[1] , InbinPt.pose.position.z] #matching world_Y of first push pt
pubFrame(br, pose=prepush_targetPosition+push_orient, frame_id='target_pose', parent_frame_id='map', npub=10)
planner = IK(q0 = q_initial, target_tip_pos = prepush_targetPosition, target_tip_ori = push_orient, tip_hand_transform=push_tip_hand_transform, joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] move inside bin in push orient successful'
#~ print '[PushBack] tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
right_plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushBack] move inside bin in push orient fail'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH###############
# Open the gripper to dim calculated for pushing
print '[PushBack] hand opening to'
print push_hand_opening*1000.0
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
right_plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
back_bin_X=bin_face_pos_world.pose.position.x+0.42
push_stop_worldX=back_bin_X-max_diag-0.010
right_pushStop_Pt_pos=deepcopy(right_push_Pt)
right_pushStop_Pt_pos[0]=push_stop_worldX
#Push until the end
planner = IK(q0 = q_initial, target_tip_pos = right_pushStop_Pt_pos, target_tip_ori = push_orient,
joint_topic=joint_topic, tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('fast')
s = plan.success()
if s:
print '[PushBack] start point push traj successful'
right_plans.append(plan) # Plan 1
else:
print '[PushBack] start point push traj fail'
return (False,False)
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
right_plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(right_plans)):
if isExecute:
right_plans[numOfPlan].visualize()
pauseFunc(withPause)
right_plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(right_plans)):
if isExecute:
right_plans[numOfPlan].visualizeBackward()
pauseFunc(withPause)
right_plans[len(right_plans)-numOfPlan-1].executeBackward()
if right_push or left_push:
push_possible=True
else:
push_possible=False
return(push_possible, False)
def suction_down(objPose=[1.95, 1.25, 1.4, 0, 0, 0, 1],
binNum=4,
objId=0,
bin_contents=None,
robotConfig=None,
shelfPosition=[1.9019, 0.00030975, -0.503],
forceThreshold=1,
isExecute=True,
withPause=True):
## objPose: world position and orientation frame attached to com of object in quaternion form. XYZ
## objId: object identifier
## robotConfig: current time robot configuration
## shelfPosition: shelf position in world frame
## force threshold: amount fo force needed to say we have a grasp
joint_topic = '/joint_states'
## initialize listener rospy
listener = tf.TransformListener()
rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
# shelf variables
pretensionDelta = 0.00
lipHeight = 0.035
## get object position (world frame)
objPosition = getObjCOM(objPose[0:3], objId)
obj_pose_tfm_list = matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm = np.array(obj_pose_tfm_list)
obj_pose_orient = obj_pose_tfm[0:3, 0:3]
vertical_index = np.argmax(np.fabs(obj_pose_orient[2, 0:3]))
object_dim = get_obj_dim(objId)
object_dim = adjust_obj_dim(objId, object_dim)
vertical_dim = object_dim[vertical_index]
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic,
sensor_msgs.msg.JointState).getmsg()
q0 = APCrobotjoints.position
if len(q0) >= 6:
q0 = q0[
0:
6] # take first 6, because in virtual environmet there will be additional 2 hand joint
break
## move gripper to object com outside bin along world y direction and
## move the gripper over the lip of the bin
# set tcp
vert_offset = .035
l2 = .44
tip_hand_transform = [
-vert_offset, 0, l2, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br,
pose=tip_hand_transform,
frame_id='tip',
parent_frame_id='link_6',
npub=5)
# get position of the tcp in world frame
pose_world = coordinateFrameTransform(tip_hand_transform[0:3], 'link_6',
'map', listener)
tcpPos = [
pose_world.pose.position.x, pose_world.pose.position.y,
pose_world.pose.position.z
]
#this may cause issues!!!
tcpPosHome = tcpPos
# set scoop orientation (rotate wrist)
scoopOrientation = [0.7071, 0, 0.7071, 0]
distFromShelf = 0.05
wristWidth = 0.0725 # this is actually half the wrist width
(binMouth, bin_height, bin_width) = getBinMouth(distFromShelf, binNum)
pose_world = coordinateFrameTransform(binMouth[0:3], 'shelf', 'map',
listener)
binMouth = [
pose_world.pose.position.x, pose_world.pose.position.y,
pose_world.pose.position.z
]
hand_gap = 0
gripper.close()
finger_length = .23
finger_width = .08
up_offset = .05
down_offset = -.025
cup_to_spatula = .08
hand_width = .15
max_gripper_width = 110
hand_top_offset = hand_width / 2 + vert_offset + .01
hand_bot_offset = hand_width / 2 - vert_offset
#this determines bin stuff based on bin input
binFloorHeight = binMouth[2] - bin_height / 2
binCeilHeight = binMouth[2] + bin_height / 2
#this determines bin sides based on object
#(binSmall,binLarge)=getSides(objPosition[1],listener)
(binSmall, binLarge) = getSides(binNum, listener)
horz_offset = 0
small_limit = binSmall + finger_width / 2 + horz_offset
large_limit = binLarge - finger_width / 2 - horz_offset
plans = []
plan = Plan()
if objPosition[1] < 0:
link6_angle = (q0[5] - math.pi)
possible_start_config = [
0.007996209289, -0.6193283503, 0.5283758664, -0.1974229539,
0.09102420595, 3.33888627518 - 2 * math.pi
]
else:
link6_angle = (q0[5] + math.pi)
possible_start_config = [
0.007996209289, -0.6193283503, 0.5283758664, -0.1974229539,
0.09102420595, 3.33888627518
]
#start_config=possible_start_config
start_config = [q0[0], q0[1], q0[2], q0[3], q0[4], link6_angle]
planner = IKJoint(q0=q0, target_joint_pos=start_config)
plan = planner.plan()
#plan.q_traj=[q0,start_config]
plans.append(plan)
qf = plan.q_traj[-1]
def get_motion_param(target_x, target_y):
object_depth = target_x - binMouth[0]
sidepos = min(max(target_y, small_limit), large_limit)
if object_depth < finger_length:
print '[SucDown] shallow suction'
h1 = binCeilHeight - lipHeight - cup_to_spatula
h2 = binFloorHeight + vertical_dim - down_offset
else:
print '[SucDown] deep suction, quitting'
h1 = binCeilHeight - lipHeight - hand_top_offset
h2a = binFloorHeight + vertical_dim - down_offset
h2b = binFloorHeight + hand_bot_offset + lipHeight
h2 = max(h2a, h2b)
return False, h1, h2, sidepos
h2 = max(h2, binFloorHeight)
if h2 > h1:
print '[SucDown] cant go in'
return False, h1, h2, sidepos
return True, h1, h2, sidepos
def generate_plan(targetPositionList, plans, qf):
for tp_index in range(0, len(targetPositionList)):
targetPosition = targetPositionList[tp_index]
planner = IK(q0=qf,
target_tip_pos=targetPosition,
target_tip_ori=scoopOrientation,
tip_hand_transform=tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
print '[SucDown] Plan number:', tp_index + 1
if s:
print '[SucDown] Plan calculated successfully'
plans.append(plan)
else:
print '[SucDown] Plan calulation failed'
return (False, plans, qf)
qf = plan.q_traj[-1]
return (True, plans, qf)
def execute_forward(plans, hand_gap):
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
def execute_backward(plans, hand_gap, plan_offset):
for numOfPlan in range(0, len(plans) - plan_offset):
plans[len(plans) - numOfPlan -
1].visualizeBackward(hand_param=hand_gap)
if isExecute:
pauseFunc(withPause)
plans[len(plans) - numOfPlan - 1].executeBackward()
def try_suction(target_x, target_y, plans, qf, num_iter):
(continue_val, h1, h2, sidepos) = get_motion_param(target_x, target_y)
if continue_val == False:
return False, False
final_hand_gap = max_gripper_width
targetPositionList = [[target_x, sidepos, h1], [target_x, sidepos, h2]]
(continue_val, plans,
throwaway) = generate_plan(targetPositionList, plans, qf)
if continue_val == False:
return False, False
#set robot speed
setSpeedByName(speedName='faster')
hand_gap = 0
gripper.close()
execute_forward(plans, hand_gap)
#suction.start()
gripper.set_force(10)
gripper.grasp(move_pos=max_gripper_width)
gripper.close()
hand_gap = max_gripper_width
print '[SucDown] hand_gap:', hand_gap
execute_backward(plans, hand_gap, 0)
#time.sleep(4)
my_return = suction.check() or suction_override(objId)
if my_return == True:
#set robot speed
setSpeedByName(speedName='fast')
return (True, True)
else:
#suction.stop()
return (True, False)
target_offset = get_test_offset(objId)
target_x_list = [
objPosition[0], objPosition[0] - target_offset, objPosition[0],
objPosition[0], objPosition[0] + target_offset
]
target_y_list = [
objPosition[1], objPosition[1], objPosition[1] + target_offset,
objPosition[1] - target_offset, objPosition[1]
]
count = 0
suction_succeed = False
overall_plan_succeed = False
(continue_val, h1, h2,
sidepos) = get_motion_param(target_x=target_x_list[0],
target_y=target_y_list[0])
if continue_val == False:
return False, False
#targetPositionList=[
#[binMouth[0]-.15, sidepos, h1],
#[binMouth[0]-.15, sidepos, h1],
#[target_x_list[0], sidepos, h1]]
targetPositionListA = [[binMouth[0] - .15, sidepos, h1],
[binMouth[0] - .15, sidepos, h1]]
targetPositionListB = [[target_x_list[0], sidepos, h1]]
(continue_val, plans1, qf) = generate_plan(targetPositionListA, plans, qf)
if continue_val == False:
return False, False
(continue_val, plans2, qf) = generate_plan(targetPositionListB, [], qf)
if continue_val == False:
return False, False
setSpeedByName(speedName='yolo')
execute_forward(plans1, 0)
setSpeedByName(speedName='faster')
execute_forward(plans2, 0)
suction.start()
#time.sleep(6)
#plans_store=plans
plans = []
for count in range(0, len(target_x_list)):
(plan_succeed,
suction_succeed) = try_suction(target_x=target_x_list[count],
target_y=target_y_list[count],
plans=plans,
qf=qf,
num_iter=count)
if suction_succeed:
overall_plan_succeed = True
break
#return (plan_succeed,suction_succeed)
if plan_succeed == True:
overall_plan_succeed = True
while True:
APCrobotjoints = ROS_Wait_For_Msg(
joint_topic, sensor_msgs.msg.JointState).getmsg()
qf = APCrobotjoints.position
if len(qf) < 6:
continue
else:
break
print '[SucDown] qf:', hand_gap
plans = []
count = count + 1
execute_backward(plans2, 0, 0)
if not suction_succeed:
suction.stop()
return (overall_plan_succeed, suction_succeed)
def suction_side(objPose=[1.95, 1.25, 1.4, 0, 0, 0, 1],
binNum=4,
objId=0,
bin_contents=None,
robotConfig=None,
shelfPosition=[1.9019, 0.00030975, -0.503],
forceThreshold=1,
isExecute=True,
withPause=False):
## objPose: world position and orientation frame attached to com of object in quaternion form. XYZ
## objId: object identifier
## robotConfig: current time robot configuration
## shelfPosition: shelf position in world frame
## force threshold: amount fo force needed to say we have a grasp
joint_topic = '/joint_states'
## initialize listener rospy
listener = tf.TransformListener()
#rospy.sleep(0.1)
br = tf.TransformBroadcaster()
rospy.sleep(0.1)
# shelf variables
pretensionDelta = 0.00
lipHeight = 0.035
#tcp_offset_variables
# plan store
plans = []
## get object position (world frame)
objPosition = getObjCOM(objPose[0:3], objId)
obj_pose_tfm_list = matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm = np.array(obj_pose_tfm_list)
obj_pose_orient = obj_pose_tfm[0:3, 0:3]
vertical_index = np.argmax(np.fabs(obj_pose_orient[2, 0:3]))
object_dim = get_obj_dim(objId)
vertical_dim = object_dim[vertical_index]
s1 = np.fabs(obj_pose_orient[1, 0]) * object_dim[0]
s2 = np.fabs(obj_pose_orient[1, 1]) * object_dim[1]
s3 = np.fabs(obj_pose_orient[1, 2]) * object_dim[2]
s4 = np.fabs(obj_pose_orient[1,
vertical_index]) * object_dim[vertical_index]
horizontal_dim = s1 + s2 + s3 - s4
hand_gap = 0
gripper.close()
while True:
APCrobotjoints = ROS_Wait_For_Msg(joint_topic,
sensor_msgs.msg.JointState).getmsg()
q0 = APCrobotjoints.position
if len(q0) < 6:
continue
else:
break
## move gripper to object com outside bin along world y direction and
## move the gripper over the lip of the bin
# set tcp
vert_offset = .035
l2 = 0.43 #change this to edit where you think the cup is
l2 = .44
tip_hand_transform = [
-vert_offset, 0, l2, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
# for i in range(5):
# rospy.sleep(0.1)
# br.sendTransform(tuple(tip_hand_transform[0:3]), tfm.quaternion_from_euler(*tip_hand_transform[3:6]), rospy.Time.now(), 'tip', "link_6")
# rospy.sleep(0.1)
pubFrame(br,
pose=tip_hand_transform,
frame_id='target_pose',
parent_frame_id='tip',
npub=1)
# get position of the tcp in world frame
pose_world = coordinateFrameTransform(tip_hand_transform[0:3], 'link_6',
'map', listener)
tcpPos = [
pose_world.pose.position.x, pose_world.pose.position.y,
pose_world.pose.position.z
]
#this may cause issues!!!
tcpPosHome = tcpPos
# set scoop orientation (rotate wrist)
distFromShelf = 0.05
wristWidth = 0.0725 # this is actually half the wrist width
(binMouth, bin_height, bin_width) = getBinMouth(distFromShelf, binNum)
pose_world = coordinateFrameTransform(binMouth[0:3], 'shelf', 'map',
listener)
binMouth = [
pose_world.pose.position.x, pose_world.pose.position.y,
pose_world.pose.position.z
]
object_depth = objPosition[0] - binMouth[0]
finger_length = .23
finger_width = .08
up_offset = .05
down_offset = .01
cup_to_spatula = .08
hand_width = .15
max_gripper_width = .110
hand_top_offset = hand_width / 2 + vert_offset + .015
hand_bot_offset = hand_width / 2 - vert_offset + .015
up_down_adjust = .025
side_offset = .03
binFloorHeight = binMouth[2] - bin_height / 2
binCeilHeight = binMouth[2] + bin_height / 2
min_height = binFloorHeight + lipHeight + finger_width / 2 + down_offset
desired_height = objPosition[2]
max_height = binCeilHeight - lipHeight - finger_width / 2 - down_offset - up_down_adjust
target_height = desired_height
if target_height < min_height:
target_height = min_height
if target_height > max_height:
target_height = max_height
bin_sideways = binMouth[1]
sidepos = objPosition[1]
horz_offset = 0.01
#this determines bin sides based on object
#(binSmall,binLarge)=getSides(objPosition[1],listener)
(binSmall, binLarge) = getSides(binNum, listener)
binRight = binSmall
binLeft = binLarge
if sidepos > bin_sideways:
#this stuff is what happens if the object is to the left
print '[SucSide] Object is to the left'
#turn the suction cup so that it is sideways left
scoopOrientation = [.5, -.5, .5, -.5]
side_waypoint1a = binRight + cup_to_spatula + .01
side_waypoint1b = sidepos - horizontal_dim / 2 - 2 * horz_offset
if side_waypoint1a > side_waypoint1b:
side_waypoint1 = side_waypoint1a
print '[SucSide] side waypoint A'
else:
side_waypoint1 = side_waypoint1b
print '[SucSide] side waypoint B'
#side_waypoint2=sidepos+horizontal_dim-side_offset
side_waypoint2 = binLeft - horizontal_dim - horz_offset
if side_waypoint2 < side_waypoint1:
if side_waypoint2 < side_waypoint1a:
print '[SucSide] Not enought gap'
return (False, False)
else:
side_waypoint1 = side_waypoint2
else:
#this stuff is what happens if the object is to the right
print '[SucSide] Object is to the right'
#turn the suction cup so that it is sideways right
scoopOrientation = [0.5, .5, .5, .5]
side_waypoint1a = binLeft - cup_to_spatula - .01
side_waypoint1b = sidepos + horizontal_dim / 2 + 2 * horz_offset
if side_waypoint1a < side_waypoint1b:
side_waypoint1 = side_waypoint1a
print '[SucSide] side waypoint A'
else:
side_waypoint1 = side_waypoint1b
print '[SucSide] side waypoint B'
#side_waypoint2=sidepos-horizontal_dim+side_offset
side_waypoint2 = binRight + horizontal_dim + horz_offset
if side_waypoint2 > side_waypoint1:
if side_waypoint2 > side_waypoint1a:
print '[SucSide] Not enought gap'
return (False, False)
else:
side_waypoint1 = side_waypoint2
targetPositionList = [
[binMouth[0] - .15, side_waypoint1, target_height + up_down_adjust],
[objPosition[0], side_waypoint1, target_height + up_down_adjust],
[objPosition[0], side_waypoint2, target_height + up_down_adjust],
[objPosition[0], side_waypoint2, target_height]
]
qf = q0
for tp_index in range(0, len(targetPositionList)):
targetPosition = targetPositionList[tp_index]
frontOfObjectPtOutOfBin = targetPosition
q_initial = qf
planner = IK(q0=q_initial,
target_tip_pos=targetPosition,
target_tip_ori=scoopOrientation,
tip_hand_transform=tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
s = plan.success()
if s:
print '[SucSide] move to COM in y successful'
print '[SucSide] tcp at:', targetPosition
plan.visualize(hand_param=hand_gap)
plans.append(plan)
#if isExecute:
# pauseFunc(withPause)
# plan.execute()
else:
print '[SucSide] move to COM in y fail'
return (False, False)
#print plan.q_traj
qf = plan.q_traj[-1]
print '[SucSide] qf:', qf
#set robot speed
setSpeedByName(speedName='faster')
for numOfPlan in range(0, len(plans)):
if numOfPlan >= len(plans) - 2:
setSpeedByName(speedName='fast')
if isExecute:
plans[numOfPlan].visualize(hand_param=hand_gap)
pauseFunc(withPause)
plans[numOfPlan].execute()
suction.start()
final_hand_gap = 110
gripper.set_force(12)
gripper.grasp(move_pos=final_hand_gap)
gripper.close()
hand_gap = final_hand_gap
print '[SucSide] hand_gap:', hand_gap
continue_suction = suction_items(objId)
if continue_suction:
print '[SucSide] object is of type that suction side will try to remove from bin'
else:
print '[SucSide] object is to big to remove from bin'
## retreat
for numOfPlan in range(0, len(plans) - 1):
plans[len(plans) - numOfPlan -
1].visualizeBackward(hand_param=hand_gap)
if isExecute:
pauseFunc(withPause)
plans[len(plans) - numOfPlan - 1].executeBackward()
if not continue_suction:
suction.stop()
rospy.sleep(3)
print '[SucSide] Is suction in contact still? Lets see:'
print '[SucSide] suction.check(): ', suction.check()
print '[SucSide] suction.check(): ', suction.check()
if suction.check():
#set robot speed
print '[SucSide] got item. continuing. suction'
setSpeedByName(speedName='fast')
return (True, True)
else:
print '[SucSide] did not get item. Stopping suction'
suction.stop()
return (True, False)
pose = [0, 0, 0, 0, 0, 0, 1]
#pdb.set_trace()
# create an interactive marker server on the topic namespace simple_marker
server = InteractiveMarkerServer("affordance_marker")
int_marker = createInteractiveMarker('Object', *pose)
pointmarker = createPointMarker(colors=colors,
points=points,
offset=tuple(pose[0:3]),
orientation=tuple(pose[3:7]))
int_marker.controls.append(pointmarker)
int_marker.controls.extend(createMoveControls(fixed=True))
#### create a static marker
dim = get_obj_dim(obj_id)
for i in range(5):
vizCubeMarker(size=dim, rgba=(0, 1, 0, 0.3))
server.insert(int_marker, processFeedback)
rospy.Timer(rospy.Duration(0.01), frameCallback)
server.applyChanges()
# ros services
#startPoseService()
rospy.spin()
def push_rotate(objPose=[1.95, 0.25, 1.4, 0, 0, 0, 1],
binNum=4,
objId='crayola_64_ct',
bin_contents=None,
robotConfig=None,
grasp_range_lim=0.11,
fing_width=0.06,
isExecute=True,
withPause=True):
#~ *****************************************************************
obj_dim = get_obj_dim(objId)
obj_dim = np.array(obj_dim)
#~ *****************************************************************
# # DEFINE HAND WIDTH#########################
hand_width = 0.186
#~ *****************************************************************
## initialize listener rospy
listener = tf.TransformListener()
br = tf.TransformBroadcaster()
rospy.sleep(0.2)
(shelf_position,
shelf_quaternion) = lookupTransform("map", "shelf", listener)
# print shelf_position, shelf_quaternion
#~ *****************************************************************
# Convert xyx quat to tranformation matrix for Shelf frame
#~ shelf_pose_tfm_list=matrix_from_xyzquat(shelfPose[0:3], shelfPose[3:7])
shelf_pose_tfm_list = matrix_from_xyzquat(shelf_position, shelf_quaternion)
shelf_pose_tfm = np.array(shelf_pose_tfm_list)
shelf_pose_orient = shelf_pose_tfm[0:3, 0:3]
#~ print 'shelf_pose_orient'
#~ print shelf_pose_orient
shelf_pose_pos = shelf_pose_tfm[0:3, 3]
#~ print 'shelf_pose_pos'
#~ print shelf_pose_pos
#Normalized axes of the shelf frame
shelf_X = shelf_pose_orient[:, 0] / la.norm(shelf_pose_orient[:, 0])
shelf_Y = shelf_pose_orient[:, 1] / la.norm(shelf_pose_orient[:, 1])
shelf_Z = shelf_pose_orient[:, 2] / la.norm(shelf_pose_orient[:, 2])
#~ *****************************************************************
# Convert xyx quat to tranformaation matrix for Object frame
obj_pose_tfm_list = matrix_from_xyzquat(objPose[0:3], objPose[3:7])
obj_pose_tfm = np.array(obj_pose_tfm_list)
obj_pose_orient = obj_pose_tfm[0:3, 0:3]
obj_pose_pos = obj_pose_tfm[0:3, 3]
#~ print 'obj_pose_orient'
#~ print obj_pose_orient
#Normalized axes of the object frame
obj_X = obj_pose_orient[:, 0] / la.norm(obj_pose_orient[:, 0])
#~ print 'obj_X'
#~ print obj_X
obj_Y = obj_pose_orient[:, 1] / la.norm(obj_pose_orient[:, 1])
#~ print 'obj_Y'
#~ print obj_Y
obj_Z = obj_pose_orient[:, 2] / la.norm(obj_pose_orient[:, 2])
#~ print 'obj_Z'
#~ print obj_Z
#Normalized object frame
obj_pose_orient_norm = np.vstack((obj_X, obj_Y, obj_Z))
obj_pose_orient_norm = obj_pose_orient_norm.transpose()
#~ print 'obj_pose_orient_norm'
#~ print obj_pose_orient_norm
#~ *****************************************************************
# We will assume that hand normal tries to move along object dimension along the Y axis of the shelf (along the lenght of the bin)
# Find projection of object axes on Y axis of the shelf frame
proj_vecY = np.dot(shelf_Y, obj_pose_orient_norm)
#~ print 'proj'
#~ print proj_vecY
max_proj_valY, hand_norm_dir = np.max(np.fabs(proj_vecY)), np.argmax(
np.fabs(proj_vecY))
if proj_vecY[hand_norm_dir] > 0:
hand_norm_vec = -obj_pose_orient_norm[:, hand_norm_dir]
else:
hand_norm_vec = obj_pose_orient_norm[:, hand_norm_dir]
#~ print 'hand_norm_vec'
#~ print hand_norm_vec
#Find angle of the edge of the object
Cos_angle_made_with_shelf_Y = max_proj_valY / (la.norm(shelf_Y) *
la.norm(hand_norm_vec))
angle_to_shelfY = np.arccos(Cos_angle_made_with_shelf_Y) * 180.0 / np.pi
#~ print'angle_to_shelfY'
#~ print angle_to_shelfY
#Find object dimension along hand normal axis
obj_dim_along_hand_norm = obj_dim[hand_norm_dir]
print '[PushRotate] dim along hand norm', obj_dim_along_hand_norm
#~ *****************************************************************
#Find projection of object axes on X axis of the shelf frame
#To find out which object frame is lying closer to the X axis of the shelf
proj_vecX = np.dot(shelf_X, obj_pose_orient_norm)
max_proj_valX, fing_axis_dir = np.max(np.fabs(proj_vecX)), np.argmax(
np.fabs(proj_vecX))
if proj_vecX[fing_axis_dir] > 0:
fing_axis_vec = obj_pose_orient_norm[:, fing_axis_dir]
else:
fing_axis_vec = -obj_pose_orient_norm[:, fing_axis_dir]
#~ print 'fing_axis_vec'
#~ print fing_axis_vec
#Find object dimension along the finger axis
obj_dim_along_fingAxis = obj_dim[fing_axis_dir]
print '[PushRotate] obj_dim_along_fingAxis:', obj_dim_along_fingAxis
#~ *****************************************************************
#Find projection of object axes on Z axis of the shelf frame
#To find out which object frame is lying closer to the Z axis of the shelf
proj_vecZ = np.dot(shelf_Z, obj_pose_orient_norm)
max_proj_valZ, Zaxis_dir = np.max(np.fabs(proj_vecZ)), np.argmax(
np.fabs(proj_vecZ))
Zaxis_vec = obj_pose_orient_norm[:, Zaxis_dir]
#~ print 'Zaxis_vec'
#~ print Zaxis_vec
#Find object dimension along the finger axis, shelf Z
obj_dim_along_ZAxis = obj_dim[Zaxis_dir]
hand_Y = np.cross(hand_norm_vec, fing_axis_vec)
#~ *****************************************************************
#################### DECISION STRATEGIES #########################
bin_inner_cnstr = get_bin_inner_cnstr()
proj_handNorm_ShelfX = np.dot(hand_norm_vec, shelf_X)
right_push = False
left_push = False
# print 'obj_dim_along_hand_norm', obj_dim_along_hand_norm
# print 'obj_dim_along_fingAxis', obj_dim_along_fingAxis
#
# print 'proj_handNorm_ShelfX'
# print proj_handNorm_ShelfX
if obj_dim_along_hand_norm > obj_dim_along_fingAxis:
#~ print 'proj_vecY'
#~ print proj_vecY
#~ print proj_vecY[hand_norm_dir]
#~
#~ print 'proj_vecX'
#~ print proj_vecX
#~ print proj_vecX[fing_axis_dir]
#~ if proj_vecY[hand_norm_dir]*proj_vecX[fing_axis_dir]<0:
#~ #Do left push
#~ Ypush_mult=1
#~ print 'Left Push'
#~ else:
#~ #Do right push
#~ Ypush_mult=-1
#~ print 'right Push'
if proj_handNorm_ShelfX > 0:
#Do left push
Ypush_mult = 1
left_push = True
print '[PushRotate] Left Push'
else:
#Do right push
Ypush_mult = -1
print '[PushRotate] right Push'
right_push = True
push_offset = (
obj_dim_along_hand_norm / 2.0
) #(Instead pf pushing on edge we will push 5 mm inside)
else:
#~ if proj_vecY[hand_norm_dir]*proj_vecX[fing_axis_dir]<0:
#~ #Do right push
#~ Ypush_mult=-1
#~ print 'right Push'
#~ else:
#~ #Do left push
#~ Ypush_mult=1
#~ print 'Left Push'
if proj_handNorm_ShelfX > 0:
#Do right push
Ypush_mult = -1
print '[PushRotate] right Push'
right_push = True
else:
#Do left push
Ypush_mult = 1
print '[PushRotate] Left Push'
left_push = True
push_offset = (obj_dim_along_fingAxis / 2.0)
num_intm_points = 5
push_x_intm = np.zeros(num_intm_points + 1)
push_y_intm = np.zeros(num_intm_points + 1)
backWall_shelf = bin_inner_cnstr[binNum][1]
backWall_world = coordinateFrameTransform([0, backWall_shelf, 0], 'shelf',
'map', listener)
back_check = backWall_world.pose.position.x - obj_dim_along_hand_norm / 2.0
binRightWall = bin_inner_cnstr[binNum][0]
binLeftWall = bin_inner_cnstr[binNum][1]
binRightWall_world = coordinateFrameTransform([binRightWall, 0, 0],
'shelf', 'map', listener)
binLeftWall_world = coordinateFrameTransform([binLeftWall, 0, 0], 'shelf',
'map', listener)
if left_push:
sideWall_check = binRightWall_world.pose.position.y + (
fing_width / 2.0) + (obj_dim_along_fingAxis)
if right_push:
sideWall_check = binLeftWall_world.pose.position.y - (
fing_width / 2.0) - (obj_dim_along_fingAxis)
for i in range(num_intm_points + 1):
push_x_intm[i] = obj_pose_pos[0] + (push_offset) * np.sin(
((90 / num_intm_points) * i * np.pi) / 180.0)
if push_x_intm[i] > back_check:
push_x_intm[i] = back_check
push_y_intm[i] = obj_pose_pos[1] + (Ypush_mult * push_offset) * np.cos(
((90 / num_intm_points) * i * np.pi) / 180.0)
if left_push:
if push_y_intm[i] < sideWall_check:
push_y_intm[i] = sideWall_check
print '[PushRotate] push Y reduced, I do not want to crush the obj and gripper'
if right_push:
if push_y_intm[i] > sideWall_check:
push_y_intm[i] = sideWall_check
print '[PushRotate] push Y reduced, I do not want to crush the obj and gripper'
push_x_intm = np.array(push_x_intm)
#~ print'push_x_intm'
#~ print push_x_intm
push_y_intm = np.array(push_y_intm)
#*******************************************************************
#Move the hand to the center of the bin and open the hand based on the height of the object
bin_mid_pos, binFloorHeight = getBinMouthAndFloor(0.0, binNum)
binFloorHeight_world = coordinateFrameTransform([0, 0, binFloorHeight],
'shelf', 'map', listener)
bin_mid_pos_world = coordinateFrameTransform(bin_mid_pos, 'shelf', 'map',
listener)
#*******************************************************************
tcp_Z_off = 0.005
push_tcp_Z_shelfFrame = (
(bin_inner_cnstr[binNum][4] + bin_inner_cnstr[binNum][5]) /
2.0) - tcp_Z_off
push_tcp_Z_WorldFrame = coordinateFrameTransform(
[0, 0, push_tcp_Z_shelfFrame], 'shelf', 'map', listener)
push_tcp_Z = push_tcp_Z_WorldFrame.pose.position.z
push_z_intm = (push_tcp_Z) * np.ones(push_x_intm.size)
push_series_pos = np.vstack((push_x_intm, push_y_intm, push_z_intm))
push_series_pos = push_series_pos.transpose()
#~ print 'push_series_pos'
#~ print push_series_pos
#~ print push_series_pos[0,:]
#~ print push_series_pos[-1,:]
push_possible = True
#******************************************************************
fing_push_pt = 0.2 * obj_dim_along_ZAxis + binFloorHeight_world.pose.position.z
blade_tip_TCP_off = 0.038 # dist between finger inner end and spatual edge
push_hand_opening = 2 * (push_tcp_Z - blade_tip_TCP_off - fing_push_pt)
if push_hand_opening > grasp_range_lim:
push_hand_opening = grasp_range_lim
# Spatula finger should not hit the lip of the bin while pushing
lip_Z_shelf = bin_inner_cnstr[binNum][4]
lip_Z_world = coordinateFrameTransform([0, 0, lip_Z_shelf], 'shelf', 'map',
listener)
#~ lip_off=.025
#~ bin_lip_Z=binFloorHeight_world.pose.position.z+lip_off
max_allowed_hand_opening_out = 2 * (push_tcp_Z -
lip_Z_world.pose.position.z)
max_allowed_hand_opening = max_allowed_hand_opening_out - 0.036 # 0.036 is diff between inside and outside of the finger/finger mount surface
if push_hand_opening > max_allowed_hand_opening:
print '[PushRotate] reducing hand opening bcaz it may hit the lip of the bin'
push_hand_opening = max_allowed_hand_opening
#~ print 'push_hand_opening'
#~ print push_hand_opening
#~ #hand should not hit the side walls
#~ binRightWall,binLeftWall=find_shelf_walls(binNum)
#~
#~ binRightWall_world = coordinateFrameTransform([binRightWall,0,0], 'shelf', 'map', listener)
#~ binLeftWall_world = coordinateFrameTransform([binLeftWall,0,0], 'shelf', 'map', listener)
side_wall_clearance = 0.0
print '[PushRotate] binRightWall_world.pose.position.y', binRightWall_world.pose.position.y
print '[PushRotate] right_hand_edge=', (push_y_intm[0] - fing_width -
side_wall_clearance)
print '[PushRotate] binLeftWall_world.pose.position.y', binLeftWall_world.pose.position.y
print '[PushRotate] left_hand_edge=', (push_y_intm[0] + fing_width +
side_wall_clearance)
if push_y_intm[
0] - fing_width - side_wall_clearance < binRightWall_world.pose.position.y:
print '[PushRotate] Hand will hit the right wall, Push rotate not possible'
push_possible = False
if push_y_intm[
0] + fing_width + side_wall_clearance > binLeftWall_world.pose.position.y:
print '[PushRotate] Hand will hit the left wall, push rotate not possible'
push_possible = False
#~ *************************************************************
# set spatual down orientation (rotate wrist)
spatula_down_orient = [0, 0.7071, 0, 0.7071]
push_orient = deepcopy(spatula_down_orient)
#~ *************************************************************
if push_possible == True:
#Now we know where we wan to move TCP
#Let's do robot motion planning now
joint_topic = '/joint_states'
# plan store
plans = []
# set tcp (same as that set in generate dictionary)
l1 = 0.0
l2 = 0.0
l3 = 0.47
tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to tcp
pubFrame(br,
pose=tip_hand_transform,
frame_id='tip',
parent_frame_id='link_6',
npub=5)
#~ *************************************************************
# GO TO MOUTH OF THE BIN
q_initial = robotConfig
# move to bin mouth
distFromShelf = 0.1
mouthPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
mouthPt = coordinateFrameTransform(mouthPt, 'shelf', 'map', listener)
targetPosition = [
mouthPt.pose.position.x, mouthPt.pose.position.y,
mouthPt.pose.position.z
]
gripperOri = [0, 0.7071, 0, 0.7071]
pubFrame(br,
pose=targetPosition + gripperOri,
frame_id='target_pose',
parent_frame_id='link_6',
npub=5)
planner = IK(q0=q_initial,
target_tip_pos=targetPosition,
target_tip_ori=gripperOri,
tip_hand_transform=tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('faster')
s = plan.success()
if s:
print '[PushRotate] move to bin mouth in push-rotate code successful'
#plan.visualize()
plans.append(plan) # Plan 0
#if isExecute:
# pauseFunc(withPause)
# plan.execute()
else:
print '[PushRotate] move to bin mouth in push-rotate code fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#################### CLOSE THE GRIPPER GRASP #################
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
plans.append(grasp_plan)
#~ moveGripper(0.1,100)
#~ *************************************************************
###### MOVE THE ROBOT INSIDE THE BIN WITH PUSH ORIENTATION ######
# set push_tcp
push_l1 = 0.0 #0.035
push_l2 = -Ypush_mult * (
fing_width / 2.0
) # This should depend on the righ or left push conditions
push_l3 = 0.47
push_tip_hand_transform = [
l1, l2, l3, 0, 0, 0
] # to be updated when we have a hand design finalized
# broadcast frame attached to grasp_tcp
pubFrame(br,
pose=push_tip_hand_transform,
frame_id='push_tip',
parent_frame_id='link_6',
npub=10)
#~ q_initial = robotConfig
# move just inside the bin with push orientation and open the hand suitable to push
distFromShelf = -0.01
InbinPt, temp = getBinMouthAndFloor(distFromShelf, binNum)
InbinPt = coordinateFrameTransform(InbinPt, 'shelf', 'map', listener)
prepush_targetPosition = [
InbinPt.pose.position.x, push_series_pos[0, 1],
InbinPt.pose.position.z
] #matching world_Y of first push pt
print '[PushRotate] prepush_targetPosition=', prepush_targetPosition
pubFrame(br,
pose=prepush_targetPosition + push_orient,
frame_id='target_pose',
parent_frame_id='map',
npub=10)
planner = IK(q0=q_initial,
target_tip_pos=prepush_targetPosition,
target_tip_ori=push_orient,
tip_hand_transform=push_tip_hand_transform,
joint_topic=joint_topic)
plan = planner.plan()
plan.setSpeedByName('slow')
s = plan.success()
if s:
print '[PushRotate] move inside bin in push orient successful'
#~ print 'tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushRotate] move inside bin in push orient fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
############## OPEN THE GRIPPER To PUSH ###############
# Open the gripper to dim calculated for pushing
print '[PushRotate] hand opening to'
print push_hand_opening * 1000.0
#~ moveGripper(push_hand_opening,100)
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (push_hand_opening))
plans.append(grasp_plan)
#~ *************************************************************
############ Execute the push trajectory ##############
#~ push_rotate_traj = Plan()
#~ push_rotate_traj.q_traj = qf
for i in range(0, push_x_intm.size):
pushpt_pos = push_series_pos[i, :].transpose()
pubFrame(br,
pose=pushpt_pos.tolist() + push_orient,
frame_id='target_pose',
parent_frame_id='map',
npub=10)
#~ pdb.set_trace()
# planner = IK(q0 = q_initial, target_tip_pos = graspPT_pose_pos, target_tip_ori = push_orient,
# joint_topic=joint_topic, tip_hand_transform=tip_hand_transform, straightness = 0.3, inframebb = inframebb)
planner = IK(q0=q_initial,
target_tip_pos=pushpt_pos,
target_tip_ori=push_orient,
joint_topic=joint_topic,
tip_hand_transform=push_tip_hand_transform)
plan = planner.plan()
plan.setSpeedByName('slow')
s = plan.success()
if s:
print '[PushRotate] point inside push traj successful'
#~ print 'tcp at:'
#~ print(pregrasp_targetPosition)
#~ plan.visualize()
plans.append(plan) # Plan 1
#~ if isExecute:
#~ pauseFunc(withPause)
#~ plan.execute()
else:
print '[PushRotate] point inside push traj fail'
return False
qf = plan.q_traj[-1]
q_initial = qf
#~ *************************************************************
#~ if isExecute:
#~ pauseFunc(withPause)
#~ push_rotate_traj.execute()
#################### CLOSE THE GRIPPER GRASP #################
#~ moveGripper(0.0,100)
grasp_plan = EvalPlan('moveGripper(%f, 100)' % (0.0))
plans.append(grasp_plan)
#~ *************************************************************
# #################### EXECUTE FORWARD ####################
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[numOfPlan].visualize()
pauseFunc(withPause)
plans[numOfPlan].execute()
# #################### RETREAT ####################
for numOfPlan in range(0, len(plans)):
if isExecute:
plans[len(plans) - numOfPlan - 1].visualizeBackward()
pauseFunc(withPause)
plans[len(plans) - numOfPlan - 1].executeBackward()
#*******************************************************************
print '[PushRotate] push_successful'
return (push_possible, False)