def cutOutOrder(self, flatOrder):
# determine cutout padding
flatOrder.cutoutPadding = config.get_cutout_padding(
self.filterName, self.slit)
# add extra padding for orders with large tilt
tilt = abs(flatOrder.avgEdgeTrace[0] - flatOrder.avgEdgeTrace[-1])
if tilt > config.params['large_tilt_threshold']:
self.logger.info('large order tilt detected, tilt = ' +
str(round(tilt, 1)) + ' threshold = ' +
str(config.params['large_tilt_threshold']) +
' extra padding = ' +
str(config.params['large_tilt_extra_padding']))
flatOrder.cutoutPadding += config.params[
'large_tilt_extra_padding']
self.logger.debug('cutout padding = ' +
str(round(flatOrder.cutoutPadding, 0)))
# determine highest point of top trace (ignore edge)
if flatOrder.topEdgeTrace is None:
flatOrder.topEdgeTrace = flatOrder.botEdgeTrace + \
(flatOrder.topCalc - flatOrder.botCalc) - 5
flatOrder.highestPoint = np.amax(
flatOrder.topEdgeTrace[0:-config.params['overscan_width']])
if flatOrder.botEdgeTrace is None:
flatOrder.botEdgeTrace = flatOrder.topEdgeTrace - \
(flatOrder.topCalc - flatOrder.botCalc) + 5
flatOrder.lowestPoint = np.amin(
flatOrder.botEdgeTrace[0:-config.params['overscan_width']])
flatOrder.cutout = np.array(
image_lib.cut_out(self.flatImg, flatOrder.highestPoint,
flatOrder.lowestPoint, flatOrder.cutoutPadding))
if float(flatOrder.lowestPoint) > float(flatOrder.cutoutPadding):
flatOrder.onOrderMask, flatOrder.offOrderMask = get_masks(
flatOrder.cutout.shape, flatOrder.topEdgeTrace -
flatOrder.lowestPoint + flatOrder.cutoutPadding,
flatOrder.botEdgeTrace - flatOrder.lowestPoint +
flatOrder.cutoutPadding)
else:
flatOrder.onOrderMask, flatOrder.offOrderMask = get_masks(
flatOrder.cutout.shape, flatOrder.topEdgeTrace,
flatOrder.botEdgeTrace)
flatOrder.cutout = np.ma.masked_array(flatOrder.cutout,
mask=flatOrder.offOrderMask)
return
def __flatten(order, eta=None, arc=None):
"""Flat field object image[s] but keep originals for noise calculation.
"""
for frame in order.frames:
order.objImg[frame] = np.array(order.objCutout[frame])
order.ffObjImg[frame] = np.array(order.objCutout[frame] /
order.flatOrder.normFlatImg)
#Also cut out the flat fielded object
order.ffObjCutout[frame] = np.array(
image_lib.cut_out(order.ffObjImg[frame],
order.flatOrder.highestPoint,
order.flatOrder.lowestPoint,
order.flatOrder.cutoutPadding))
# Add then mask it
order.ffObjCutout[frame] = np.ma.masked_array(
order.objCutout[frame], mask=order.flatOrder.offOrderMask)
if frame != 'AB':
if np.amin(order.ffObjImg[frame]) < 0:
order.ffObjImg[frame] -= np.amin(order.ffObjImg[frame])
if eta is not None:
if frame == 'B':
order.etaImgB = np.array(order.etaCutout)
order.ffEtaImgB = np.array(order.etaCutout /
order.flatOrder.normFlatImg)
else:
order.etaImg = np.array(order.etaCutout)
order.ffEtaImg = np.array(order.etaCutout /
order.flatOrder.normFlatImg)
if arc is not None:
if frame == 'B':
order.arcImgB = np.array(order.arcCutout)
order.ffArcImgB = np.array(order.arcCutout /
order.flatOrder.normFlatImg)
else:
order.arcImg = np.array(order.arcCutout)
order.ffArcImg = np.array(order.arcCutout /
order.flatOrder.normFlatImg)
order.flattened = True
logger.info('order has been flat fielded')
return
def cutOutOrder(self, flatOrder):
# determine cutout padding
flatOrder.cutoutPadding = config.get_cutout_padding(self.filterName, self.slit)
# add extra padding for orders with large tilt
tilt = abs(flatOrder.avgEdgeTrace[0] - flatOrder.avgEdgeTrace[-1])
if tilt > config.params['large_tilt_threshold']:
self.logger.info('large order tilt detected, tilt = ' + str(round(tilt, 1)) +
' threshold = ' + str(config.params['large_tilt_threshold']) +
' extra padding = ' + str(config.params['large_tilt_extra_padding']))
flatOrder.cutoutPadding += config.params['large_tilt_extra_padding']
self.logger.debug('cutout padding = ' + str(round(flatOrder.cutoutPadding, 0)))
# determine highest point of top trace (ignore edge)
if flatOrder.topEdgeTrace is None:
flatOrder.topEdgeTrace = flatOrder.botEdgeTrace + \
(flatOrder.topCalc - flatOrder.botCalc) - 5
flatOrder.highestPoint = np.amax(flatOrder.topEdgeTrace[0:-config.params['overscan_width']])
if flatOrder.botEdgeTrace is None:
flatOrder.botEdgeTrace = flatOrder.topEdgeTrace - \
(flatOrder.topCalc - flatOrder.botCalc) + 5
flatOrder.lowestPoint = np.amin(flatOrder.botEdgeTrace[0:-config.params['overscan_width']])
flatOrder.cutout = np.array(image_lib.cut_out(
self.flatImg, flatOrder.highestPoint, flatOrder.lowestPoint,
flatOrder.cutoutPadding))
if float(flatOrder.lowestPoint) > float(flatOrder.cutoutPadding):
flatOrder.onOrderMask, flatOrder.offOrderMask = get_masks(
flatOrder.cutout.shape,
flatOrder.topEdgeTrace - flatOrder.lowestPoint + flatOrder.cutoutPadding,
flatOrder.botEdgeTrace - flatOrder.lowestPoint + flatOrder.cutoutPadding)
else:
flatOrder.onOrderMask, flatOrder.offOrderMask = get_masks(
flatOrder.cutout.shape, flatOrder.topEdgeTrace, flatOrder.botEdgeTrace)
flatOrder.cutout = np.ma.masked_array(flatOrder.cutout, mask=flatOrder.offOrderMask)
return
def reduce_orders(reduced):
"""Reduces each order in the frame.
Starting order is determined from a lookup table indexed by filter name.
The grating equation is evaluated for y-axis location of the short wavelength end
of the order on the detector.
If the order is on the detector then extract_order() is called to cut out from the full
frame a rectangular array of pixels containing the entire order plus padding.
Then, reduce_order() is called to reduce the order.
reduce_order() returns an order object which is and instance of the Order class
and contains all of the reduced data for this order. The order object is then
appended to the list of order objects in the ReducedDataSet object representing
the current frame.
After the first order that should be on the detector is found, processing continues
through each order in descending order number, working toward higher pixel row numbers
on the detector, until the first off-detector order is found.
"""
for flatOrder in reduced.Flat.flatOrders:
if flatOrder.valid is not True:
continue
logger.info('***** order ' + str(flatOrder.orderNum) + ' *****')
order = Order.Order(reduced.frames, reduced.baseNames, flatOrder)
order.isPair = reduced.isPair
for frame in order.frames:
order.objCutout[frame] = np.array(image_lib.cut_out(reduced.objImg[frame],
flatOrder.highestPoint, flatOrder.lowestPoint, flatOrder.cutoutPadding))
order.integrationTime = reduced.getIntegrationTime() # used in noise calc
try:
# reduce order, i.e. rectify, extract spectra, identify sky lines
reduce_order.reduce_order(order)
# add reduced order to list of reduced orders in Reduced object
reduced.orders.append(order)
except DrpException.DrpException as e:
logger.warning('failed to reduce order {}: {}'.format(
str(flatOrder.orderNum), e.message))
# end if order is on the detector
# end for each order
loggers = ['obj']
if config.params['cmnd_line_mode'] is False:
loggers.append('main')
# for l in loggers:
# logging.getLogger(l).log(INFO, 'n orders on the detector = {}'.format(n_orders_on_detector))
# logging.getLogger(l).log(INFO, 'n orders reduced = {}'.format(len(reduced.orders)))
if len(reduced.orders) == 0:
return
for l in loggers:
reduced.snrMean = sum(reduced.orders[i].snr['A'] for i in range(len(reduced.orders))) / \
len(reduced.orders)
logging.getLogger(l).log(INFO, 'mean signal-to-noise ratio = {:.1f}'.format(
reduced.snrMean))
snr = []
for i in range(len(reduced.orders)):
snr.append(reduced.orders[i].snr['A'])
for l in loggers:
reduced.snrMin = np.amin(snr)
logging.getLogger(l).log(INFO, 'minimum signal-to-noise ratio = {:.1f}'.format(
reduced.snrMin))
try:
reduced.wMean = sum(abs(reduced.orders[i].gaussianParams['A'][2])
for i in range(len(reduced.orders))) / len(reduced.orders)
logging.getLogger(l).log(INFO, 'mean spatial peak width = {:.1f} pixels'.format(
reduced.wMean))
except BaseException:
logging.getLogger(l).log(
logging.WARNING,
'mean spatial peak width = unknown')
w = []
for i in range(len(reduced.orders)):
if reduced.orders[i].gaussianParams['A'] is not None:
w.append(reduced.orders[i].gaussianParams['A'][2])
try:
reduced.wMax = np.amax(w)
logging.getLogger(l).log(INFO, 'maximum spatial peak width = {:.1f} pixels'.format(
reduced.wMax))
except BaseException:
logging.getLogger(l).error(
'maximum spatial peak width cannot be determined')
logging.getLogger(l).log(
INFO, 'maximum spatial peak width = unknown')
return
def reduce_orders(reduced):
"""
Successively reduces each order in the frame.
Starting order is determined from a lookup table indexed by filter name.
The grating equation is evaluated for y-axis location of the short wavelength end
of the order on the detector.
If the order is on the detector then extract_order() is called to cut out from the full
frame a rectangular array of pixels containing the entire order plus padding.
Then, reduce_order() is called to reduce the order.
reduce_order() returns an order object which is and instance of the Order class
and contains all of the reduced data for this order. The order object is then
appended to the list of order objects in the ReducedDataSet object representing
the current frame.
After the first order that should be on the detector is found, processing continues
through each order in descending order number, working toward higher pixel row numbers
on the detector, until the first off-detector order is found.
"""
for flatOrder in reduced.Flat.flatOrders:
if flatOrder.valid is not True:
continue
logger.info('***** order ' + str(flatOrder.orderNum) + ' *****')
order = Order.Order(reduced.baseName, flatOrder.orderNum)
order.objCutout = np.array(image_lib.cut_out(reduced.obj,
flatOrder.highestPoint, flatOrder.lowestPoint, flatOrder.cutoutPadding))
order.integrationTime = reduced.getIntegrationTime() # used in noise calc
order.gratingEqWaveScale = flatOrder.gratingEqWaveScale
#order.wavelengthScaleMeas = flatOrder.waveScaleCalc
order.topTrace = flatOrder.topEdgeTrace
order.botTrace = flatOrder.botEdgeTrace
order.avgTrace = flatOrder.avgEdgeTrace
order.smoothedTrace = flatOrder.smoothedSpatialTrace
order.traceMask = flatOrder.spatialTraceMask
order.flatCutout = flatOrder.cutout
order.highestPoint = flatOrder.highestPoint
order.lowestPoint = flatOrder.lowestPoint
order.padding = flatOrder.cutoutPadding
order.botMeas = flatOrder.botMeas
try:
# reduce order, i.e. rectify, extract spectra, identify sky lines
reduce_order.reduce_order(order, flatOrder)
# add reduced order to list of reduced orders in Reduced object
reduced.orders.append(order)
except DrpException.DrpException as e:
logger.warning('failed to reduce order {}: {}'.format(
str(flatOrder.orderNum), e.message))
# end if order is on the detector
# end for each order
loggers = ['obj']
if config.params['cmnd_line_mode'] is False:
loggers.append('main')
# for l in loggers:
# logging.getLogger(l).log(INFO, 'n orders on the detector = {}'.format(n_orders_on_detector))
# logging.getLogger(l).log(INFO, 'n orders reduced = {}'.format(len(reduced.orders)))
if len(reduced.orders) == 0:
return
for l in loggers:
reduced.snrMean = sum(reduced.orders[i].snr for i in range(len(reduced.orders))) / \
len(reduced.orders)
logging.getLogger(l).log(INFO, 'mean signal-to-noise ratio = {:.1f}'.format(
reduced.snrMean))
snr = []
for i in range(len(reduced.orders)):
snr.append(reduced.orders[i].snr)
for l in loggers:
reduced.snrMin = np.amin(snr)
logging.getLogger(l).log(INFO, 'minimum signal-to-noise ratio = {:.1f}'.format(
reduced.snrMin))
try:
reduced.wMean = sum(abs(reduced.orders[i].gaussianParams[2]) \
for i in range(len(reduced.orders))) / len(reduced.orders)
logging.getLogger(l).log(INFO, 'mean spatial peak width = {:.1f} pixels'.format(
reduced.wMean))
except:
logging.getLogger(l).log(logging.WARNING, 'mean spatial peak width = unknown')
w = []
for i in range(len(reduced.orders)):
if reduced.orders[i].gaussianParams is not None:
w.append(reduced.orders[i].gaussianParams[2])
try:
reduced.wMax = np.amax(w)
logging.getLogger(l).log(INFO, 'maximum spatial peak width = {:.1f} pixels'.format(
reduced.wMax))
except:
logging.getLogger(l).error('maximum spatial peak width cannot be determined')
logging.getLogger(l).log(INFO, 'maximum spatial peak width = unknown')
return
def reduce_orders(reduced, eta=None, arc=None):
"""Reduces each order in the frame.
Starting order is determined from a lookup table indexed by filter name.
The grating equation is evaluated for y-axis location of the short wavelength end
of the order on the detector.
If the order is on the detector then extract_order() is called to cut out from the full
frame a rectangular array of pixels containing the entire order plus padding.
Then, reduce_order() is called to reduce the order.
reduce_order() returns an order object which is and instance of the Order class
and contains all of the reduced data for this order. The order object is then
appended to the list of order objects in the ReducedDataSet object representing
the current frame.
After the first order that should be on the detector is found, processing continues
through each order in descending order number, working toward higher pixel row numbers
on the detector, until the first off-detector order is found.
"""
for flatOrder in reduced.Flat.flatOrders:
if flatOrder.valid is not True:
continue
logger.info('*' * 20 + ' ORDER {} '.format(flatOrder.orderNum) +
'*' * 20)
#if flatOrder.orderNum != 32: continue #XXX
#if flatOrder.orderNum != 33: continue #XXX
#if flatOrder.orderNum != 37: continue #XXX
#if flatOrder.orderNum != 68: continue #XXX
order = Order.Order(reduced.frames,
reduced.baseNames,
flatOrder,
etaImg=reduced.etaImg)
order.isPair = reduced.isPair
for frame in order.frames:
### TESTING
'''
import matplotlib.pyplot as plt
plt.figure()
plt.imshow(reduced.objImg[frame], origin='lower')
plt.axhline(flatOrder.highestPoint, c='r', ls='--')
plt.axhline(flatOrder.lowestPoint, c='r', ls='--')
plt.figure()
plt.imshow(reduced.Flat.flatImg, origin='lower')
plt.axhline(flatOrder.highestPoint, c='r', ls='--')
plt.axhline(flatOrder.lowestPoint, c='r', ls='--')
plt.show()
'''
### TESTING
### TEST to mask out pixels outside of trace
# Mask out the pixels above and below the trace
#onOrderMask, offOrderMask = Flat.get_masks(
# flatOrder.cutout.shape, flatOrder.topEdgeTrace, flatOrder.botEdgeTrace)
if float(flatOrder.lowestPoint) > float(flatOrder.cutoutPadding):
onOrderMask, offOrderMask = Flat.get_masks(
flatOrder.cutout.shape, flatOrder.topEdgeTrace -
flatOrder.lowestPoint + flatOrder.cutoutPadding,
flatOrder.botEdgeTrace - flatOrder.lowestPoint +
flatOrder.cutoutPadding)
else:
onOrderMask, offOrderMask = Flat.get_masks(
flatOrder.cutout.shape, flatOrder.topEdgeTrace,
flatOrder.botEdgeTrace)
### TEST to mask out pixels outside of trace
order.objCutout[frame] = np.array(
image_lib.cut_out(reduced.objImg[frame],
flatOrder.highestPoint,
flatOrder.lowestPoint,
flatOrder.cutoutPadding))
'''
import matplotlib.pyplot as plt
plt.figure(64781)
plt.imshow(order.objCutout[frame], origin='lower', aspect='auto')
#plt.plot(np.arange(2048), topTrace, c='b', ls=':')
#plt.plot(np.arange(2048), botTrace, c='r', ls=':')
#plt.axhline(top, c='b', ls='--')
#plt.axhline(bot, c='r', ls='--')
plt.show(block=False)
'''
order.objCutout[frame] = np.ma.masked_array(order.objCutout[frame],
mask=offOrderMask)
'''
plt.figure(64782)
plt.imshow(order.objCutout[frame], origin='lower', aspect='auto')
#plt.plot(np.arange(2048), topTrace, c='b', ls=':')
#plt.plot(np.arange(2048), botTrace, c='r', ls=':')
#plt.axhline(top, c='b', ls='--')
#plt.axhline(bot, c='r', ls='--')
plt.show()
'''
if eta is not None:
order.etaCutout = np.array(
image_lib.cut_out(reduced.etaImg, flatOrder.highestPoint,
flatOrder.lowestPoint,
flatOrder.cutoutPadding))
if arc is not None:
order.arcCutout = np.array(
image_lib.cut_out(reduced.arcImg, flatOrder.highestPoint,
flatOrder.lowestPoint,
flatOrder.cutoutPadding))
order.integrationTime = reduced.getIntegrationTime(
) # used in noise calc
try:
# reduce order, i.e. rectify, extract spectra, identify sky lines
reduce_order.reduce_order(order, eta=eta, arc=arc)
# add reduced order to list of reduced orders in Reduced object
reduced.orders.append(order)
except DrpException.DrpException as e:
logger.warning('failed to reduce order {}: {}'.format(
str(flatOrder.orderNum), e.message))
# end if order is on the detector
# end for each order
loggers = ['obj']
if config.params['cmnd_line_mode'] is False:
loggers.append('main')
# for l in loggers:
# logging.getLogger(l).log(INFO, 'n orders on the detector = {}'.format(n_orders_on_detector))
# logging.getLogger(l).log(INFO, 'n orders reduced = {}'.format(len(reduced.orders)))
if len(reduced.orders) == 0:
return
for l in loggers:
reduced.snrMean = sum(reduced.orders[i].snr['A'] for i in range(len(reduced.orders))) / \
len(reduced.orders)
logging.getLogger(l).log(
INFO,
'mean signal-to-noise ratio = {:.1f}'.format(reduced.snrMean))
snr = []
for i in range(len(reduced.orders)):
snr.append(reduced.orders[i].snr['A'])
for l in loggers:
reduced.snrMin = np.amin(snr)
logging.getLogger(l).log(
INFO,
'minimum signal-to-noise ratio = {:.1f}'.format(reduced.snrMin))
try:
reduced.wMean = sum(abs(reduced.orders[i].gaussianParams['A'][2]) \
for i in range(len(reduced.orders))) / len(reduced.orders)
logging.getLogger(l).log(
INFO, 'mean spatial peak width = {:.1f} pixels'.format(
reduced.wMean))
except:
logging.getLogger(l).log(logging.WARNING,
'mean spatial peak width = unknown')
w = []
for i in range(len(reduced.orders)):
if reduced.orders[i].gaussianParams['A'] is not None:
w.append(reduced.orders[i].gaussianParams['A'][2])
try:
reduced.wMax = np.amax(w)
logging.getLogger(l).log(
INFO, 'maximum spatial peak width = {:.1f} pixels'.format(
reduced.wMax))
except:
logging.getLogger(l).error(
'maximum spatial peak width cannot be determined')
logging.getLogger(l).log(INFO,
'maximum spatial peak width = unknown')
return
