def mit_ics (grid_path, source_file, output_dir, nc_out=None, prec=64):
from file_io import NCfile, read_netcdf
from interpolation import interp_reg
output_dir = real_dir(output_dir)
# Fields to interpolate
fields = ['THETA', 'SALT', 'SIarea', 'SIheff', 'SIhsnow']
# Flag for 2D or 3D
dim = [3, 3, 2, 2, 2]
# End of filenames for output
outfile_tail = '_MIT.ini'
print 'Building grids'
source_grid = Grid(source_file)
model_grid = Grid(grid_path)
# Extract land mask of source grid
source_mask = source_grid.hfac==0
print 'Building mask for points to fill'
# Select open cells according to the model, interpolated to the source grid
fill = np.ceil(interp_reg(model_grid, source_grid, np.ceil(model_grid.hfac), fill_value=0)).astype(bool)
# Extend into mask a few times to make sure there are no artifacts near the coast
fill = extend_into_mask(fill, missing_val=0, use_3d=True, num_iters=3)
# Set up a NetCDF file so the user can check the results
if nc_out is not None:
ncfile = NCfile(nc_out, model_grid, 'xyz')
# Process fields
for n in range(len(fields)):
print 'Processing ' + fields[n]
out_file = output_dir + fields[n] + outfile_tail
# Read the January climatology
source_data = read_netcdf(source_file, fields[n], time_index=0)
# Discard the land mask, and extrapolate slightly into missing regions so the interpolation doesn't get messed up.
print '...extrapolating into missing regions'
if dim[n] == 3:
source_data = discard_and_fill(source_data, source_mask, fill)
else:
# Just care about the surface layer
source_data = discard_and_fill(source_data, source_mask[0,:], fill[0,:], use_3d=False)
print '...interpolating to model grid'
data_interp = interp_reg(source_grid, model_grid, source_data, dim=dim[n])
# Fill the land mask with zeros
if dim[n] == 3:
data_interp[model_grid.hfac==0] = 0
else:
data_interp[model_grid.hfac[0,:]==0] = 0
write_binary(data_interp, out_file, prec=prec)
if nc_out is not None:
print '...adding to ' + nc_out
if dim[n] == 3:
ncfile.add_variable(fields[n], data_interp, 'xyz')
else:
ncfile.add_variable(fields[n], data_interp, 'xy')
if nc_out is not None:
ncfile.close()
def sose_ics (grid_path, sose_dir, output_dir, nc_out=None, constant_t=-1.9, constant_s=34.4, split=180, prec=64):
from grid import SOSEGrid
from file_io import NCfile
from interpolation import interp_reg
sose_dir = real_dir(sose_dir)
output_dir = real_dir(output_dir)
# Fields to interpolate
fields = ['THETA', 'SALT', 'SIarea', 'SIheff']
# Flag for 2D or 3D
dim = [3, 3, 2, 2]
# Constant values for ice shelf cavities
constant_value = [constant_t, constant_s, 0, 0]
# End of filenames for input
infile_tail = '_climatology.data'
# End of filenames for output
outfile_tail = '_SOSE.ini'
print 'Building grids'
# First build the model grid and check that we have the right value for split
model_grid = grid_check_split(grid_path, split)
# Now build the SOSE grid
sose_grid = SOSEGrid(sose_dir+'grid/', model_grid=model_grid, split=split)
# Extract land mask
sose_mask = sose_grid.hfac == 0
print 'Building mask for SOSE points to fill'
# Figure out which points we need for interpolation
# Find open cells according to the model, interpolated to SOSE grid
model_open = np.ceil(interp_reg(model_grid, sose_grid, np.ceil(model_grid.hfac), fill_value=1))
# Find ice shelf cavity points according to model, interpolated to SOSE grid
model_cavity = np.ceil(interp_reg(model_grid, sose_grid, xy_to_xyz(model_grid.ice_mask, model_grid), fill_value=0)).astype(bool)
# Select open, non-cavity cells
fill = model_open*np.invert(model_cavity)
# Extend into the mask a few times to make sure there are no artifacts near the coast
fill = extend_into_mask(fill, missing_val=0, use_3d=True, num_iters=3)
# Set up a NetCDF file so the user can check the results
if nc_out is not None:
ncfile = NCfile(nc_out, model_grid, 'xyz')
# Process fields
for n in range(len(fields)):
print 'Processing ' + fields[n]
in_file = sose_dir + fields[n] + infile_tail
out_file = output_dir + fields[n] + outfile_tail
print '...reading ' + in_file
# Just keep the January climatology
if dim[n] == 3:
sose_data = sose_grid.read_field(in_file, 'xyzt')[0,:]
else:
# Fill any missing regions with zero sea ice, as we won't be extrapolating them later
sose_data = sose_grid.read_field(in_file, 'xyt', fill_value=0)[0,:]
# Discard the land mask, and extrapolate slightly into missing regions so the interpolation doesn't get messed up.
print '...extrapolating into missing regions'
if dim[n] == 3:
sose_data = discard_and_fill(sose_data, sose_mask, fill)
# Fill cavity points with constant values
sose_data[model_cavity] = constant_value[n]
else:
# Just care about surface layer
sose_data = discard_and_fill(sose_data, sose_mask[0,:], fill[0,:], use_3d=False)
print '...interpolating to model grid'
data_interp = interp_reg(sose_grid, model_grid, sose_data, dim=dim[n])
# Fill the land mask with zeros
if dim[n] == 3:
data_interp[model_grid.hfac==0] = 0
else:
data_interp[model_grid.hfac[0,:]==0] = 0
write_binary(data_interp, out_file, prec=prec)
if nc_out is not None:
print '...adding to ' + nc_out
if dim[n] == 3:
ncfile.add_variable(fields[n], data_interp, 'xyz')
else:
ncfile.add_variable(fields[n], data_interp, 'xy')
if nc_out is not None:
ncfile.close()
def sose_sss_restoring (grid_path, sose_dir, output_salt_file, output_mask_file, nc_out=None, h0=-1250, obcs_sponge=0, split=180, prec=64):
sose_dir = real_dir(sose_dir)
print 'Building grids'
# First build the model grid and check that we have the right value for split
model_grid = grid_check_split(grid_path, split)
# Now build the SOSE grid
sose_grid = SOSEGrid(sose_dir+'grid/', model_grid=model_grid, split=split)
# Extract surface land mask
sose_mask = sose_grid.hfac[0,:] == 0
print 'Building mask'
mask_surface = np.ones([model_grid.ny, model_grid.nx])
# Mask out land and ice shelves
mask_surface[model_grid.hfac[0,:]==0] = 0
# Save this for later
mask_land_ice = np.copy(mask_surface)
# Mask out continental shelf
mask_surface[model_grid.bathy > h0] = 0
# Smooth, and remask the land and ice shelves
mask_surface = smooth_xy(mask_surface, sigma=2)*mask_land_ice
if obcs_sponge > 0:
# Also mask the cells affected by OBCS and/or its sponge
mask_surface[:obcs_sponge,:] = 0
mask_surface[-obcs_sponge:,:] = 0
mask_surface[:,:obcs_sponge] = 0
mask_surface[:,-obcs_sponge:] = 0
# Make a 3D version with zeros in deeper layers
mask_3d = np.zeros([model_grid.nz, model_grid.ny, model_grid.nx])
mask_3d[0,:] = mask_surface
print 'Reading SOSE salinity'
# Just keep the surface layer
sose_sss = sose_grid.read_field(sose_dir+'SALT_climatology.data', 'xyzt')[:,0,:,:]
# Figure out which SOSE points we need for interpolation
# Restoring mask interpolated to the SOSE grid
fill = np.ceil(interp_reg(model_grid, sose_grid, mask_3d[0,:], dim=2, fill_value=1))
# Extend into the mask a few times to make sure there are no artifacts near the coast
fill = extend_into_mask(fill, missing_val=0, num_iters=3)
# Process one month at a time
sss_interp = np.zeros([12, model_grid.nz, model_grid.ny, model_grid.nx])
for month in range(12):
print 'Month ' + str(month+1)
print '...filling missing values'
sose_sss_filled = discard_and_fill(sose_sss[month,:], sose_mask, fill, use_3d=False)
print '...interpolating'
# Mask out land and ice shelves
sss_interp[month,0,:] = interp_reg(sose_grid, model_grid, sose_sss_filled, dim=2)*mask_land_ice
write_binary(sss_interp, output_salt_file, prec=prec)
write_binary(mask_3d, output_mask_file, prec=prec)
if nc_out is not None:
print 'Writing ' + nc_out
ncfile = NCfile(nc_out, model_grid, 'xyzt')
ncfile.add_time(np.arange(12)+1, units='months')
ncfile.add_variable('salinity', sss_interp, 'xyzt', units='psu')
ncfile.add_variable('restoring_mask', mask_3d, 'xyz')
ncfile.close()
