def Setup(tc):
#
# Set up global variables
#
tc.feature = 'lif-flow-erspan-flowmon'
tc.udp_count = NUMBER_OF_UDP_ERSPAN_PACKETS_PER_SESSION >> 1
tc.icmp_count = NUMBER_OF_ICMP_ERSPAN_PACKETS_PER_SESSION >> 1
tc.tcp_close_val = None
tc.classic_mode = False
tc.ignore = False
tc.error = False
#
# Establish Workloads
#
result = eutils.establishWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Check to see if Naples-hosted node is present
#
result = eutils.establishNaplesWorkload(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Ignore non-applicable test-options in Sanity mode
# - [peer = local] is not supported until ps_2263 is fixed
# - [collector = local] is not supported until ps_2790 is fixed
# - Multi-collector testing is not enabled in freebsd
# environment until tcpdump capture on secondary-IP is resolved
#
if (tc.args.ps_2263 != 'fixed' and tc.iterators.peer == 'local') or\
(tc.args.ps_2790 != 'fixed' and tc.iterators.collector == 'local') or\
(api.GetNodeOs(tc.naples.node_name) == 'freebsd' and\
tc.iterators.ccount > 1):
tc.ignore = True
return api.types.status.SUCCESS
if api.IsBareMetalWorkloadType(tc.naples.node_name):
tc.classic_mode = True
tc.udp_count = 1
tc.icmp_count = 1
#
# Figure out (Collector) Workloads that are remote to Naples node and
# identify remote Naples-peer, if applicable
#
result = eutils.establishRemoteWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Figure out Workloads that are local to Naples node and identify
# local Naples-peer, if applicable
#
result = eutils.establishLocalWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
if tc.classic_mode == True:
result = eutils.establishCollectorWorkloadInClassicMode(
tc, '10.255.0.2')
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Allocate Secondary-IPs for collectors as needed in order to test up to
# Eight collectors
#
result = eutils.establishCollectorSecondaryIPs(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Generate feature specific Collector list
#
eutils.generateFeatureCollectorList(tc)
eutils.debugWorkLoadTraces(tc)
#
# Retrieve relevant Table-Id's
#
eutils.retrieveTableIds(tc)
#
# Set up runtime validation knobs
# - dupcheck: To circumvent duplicate-pkts checks in case of LIF-ERSPAN
# where multiple workloads map to the same LIF
#
tc.dupcheck = 'enable'
if tc.iterators.peer == 'local' or tc.iterators.iftype != 'uplink':
tc.dupcheck = 'disable'
#
# Preserve current TCP-Close configs and shrink it to 1-second
#
if tc.classic_mode == False:
tc.tcp_close_val = get_timeout_val('tcp-close')
update_timeout('tcp-close', "1s")
return api.types.status.SUCCESS
def Setup(tc):
#
# Set up global variables
#
tc.feature = 'endpoint-span'
tc.protocol = 'all'
tc.udp_count = 1
tc.icmp_count = 1
tc.tcp_close_val = None
tc.classic_mode = False
tc.ignore = False
tc.error = False
#
# Establish Workloads
#
result = eutils.establishWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Check to see if Naples-hosted node is present
#
result = eutils.establishNaplesWorkload(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Ignore non-applicable test-options in Sanity mode
# - Multi-collector testing is not enabled in freebsd
# environment until tcpdump capture on secondary-IP is resolved
# - Multi-collector testing is limited to 2 in esx
# environment until secondary-IP works in esx mode
#
if (api.GetNodeOs(tc.naples.node_name) == 'freebsd' and\
tc.iterators.ccount > 1) or\
(api.GetNodeOs(tc.naples.node_name) == 'esx' and\
tc.iterators.ccount > 2):
tc.ignore = True
return api.types.status.SUCCESS
if api.IsBareMetalWorkloadType(tc.naples.node_name):
tc.classic_mode = True
#
# Figure out (Collector) Workloads that are remote to Naples node and
# identify remote Naples-peer, if applicable
#
result = eutils.establishRemoteWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Figure out Workloads that are local to Naples node and identify
# local Naples-peer, if applicable
#
result = eutils.establishLocalWorkloads(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
'''
# endpoint span is not supported in classic mode
if tc.classic_mode == True:
result = eutils.establishCollectorWorkloadInClassicMode(tc,
'10.255.0.2')
if result != api.types.status.SUCCESS:
tc.error = True
return result
'''
#
# Allocate Secondary-IPs for collectors as needed in order to test up to
# Eight collectors
#
result = eutils.establishCollectorSecondaryIPs(tc)
if result != api.types.status.SUCCESS:
tc.error = True
return result
#
# Generate feature specific Collector list
#
eutils.generateFeatureCollectorList(tc)
eutils.debugWorkLoadTraces(tc)
#
# Retrieve relevant Table-Id's
#
eutils.retrieveTableIds(tc)
#
# Set up runtime validation knobs
# - dupcheck: To circumvent duplicate-pkts checks in case of LIF-ERSPAN
# where multiple workloads map to the same LIF
#
tc.dupcheck = 'enable'
if tc.iterators.peer == 'local':
tc.dupcheck = 'disable'
#
# Preserve current TCP-Close configs and shrink it to 1-second
#
if tc.classic_mode == False:
tc.tcp_close_val = get_timeout_val('tcp-close')
update_timeout('tcp-close', "1s")
#Query will get the reference of objects on store
nw_filter = "meta.name=" + tc.naples.workload_name + ";"
tc.store_endpoint_objects = netagent_cfg_api.QueryConfigs(kind='Endpoint',
filter=nw_filter)
if len(tc.store_endpoint_objects) == 0:
api.Logger.error("No Endpoint objects in store")
tc.ignore = True
return api.types.status.FAILURE
#api.Logger.info("Len of endpoint_objects {}".format(len(tc.store_endpoint_objects)))
#cfg_api.PrintConfigsObjects(tc.store_endpoint_objects)
#api.Logger.info("Naples selected for test node: {} WL: {}".format(tc.naples.node_name, tc.naples.workload_name))
return api.types.status.SUCCESS