def __init__(self, playbackchannels=1, recordchannels=1):
"""
@param playbackchannels: the number of channels for playback (can not be changed later)
@param recordchannels: the number of channels for recording (can not be changed later)
"""
self.__deleted = True
# set up jack
self.__prefix = "SuMPF"
self.__inputs = []
self.__outputs = []
jack.attach(self.__prefix)
self.__deleted = False
for i in range(recordchannels):
portname = "in_" + str(i + 1)
self.__inputs.append(self.__prefix + ":" + portname)
jack.register_port(portname, jack.IsInput)
for i in range(playbackchannels):
portname = "out_" + str(i + 1)
self.__outputs.append(self.__prefix + ":" + portname)
jack.register_port(portname, jack.IsOutput)
jack.activate()
# other stuff
BaseIO.__init__(self, playbackchannels, recordchannels)
# self.__periods = self.__GetNumberOfPeriods()
self.__periods = 2
self.__buffer_size = 0 # This will be set when the interaction with the sound card starts
def index():
ports = None
try:
ports = jack.get_ports()
except (jack.NotConnectedError, jack.Error):
try:
jack.detach('studio-webapp')
jack.attach('studio-webapp')
ports = jack.get_ports()
except (jack.NotConnectedError, jack.Error):
return render_template('jack_device_error.html')
inports = []
outports = []
connects = {}
for port in ports:
if (jack.get_port_flags(port) & jack.IsInput) > 0:
inports.append(port)
connects[port] = jack.get_connections(port)
if (jack.get_port_flags(port) & jack.IsOutput) > 0:
outports.append(port)
try:
otg_systemd_status = subprocess.check_output(['sudo',
'systemctl',
'is-active',
'studio-gaudio_in'])
except subprocess.CalledProcessError, e:
otg_systemd_status = 'failed'
def arranca_resampler(card, rate, mode):
""" mode puede ser: zita-a2j, zita-j2a, alsa_in, alsa_out
"""
resamplerIsRunning = False
if "zita" in mode:
# este es el verdadero arranque de zita:
resamplerIsRunning = zitaJack(card, rate, mode,
log=False) # ver la funcion zitaJack
elif "alsa" in mode:
resamplerIsRunning = alsaInOut(card, rate, mode)
if resamplerIsRunning:
# esperamos a que los puertos zita aparezcan en jack
jack.attach('tmp')
intentos = 8
encontrado = False
while intentos:
for port in jack.get_ports():
if bareCard(card) in port:
encontrado = True
if encontrado:
print "(soundcards) Se ha reiniciado " + mode + " " + card + " " + rate
break
intentos -= 1
print "(soundcards) Esperando a " + mode + "." * (8 - intentos + 1)
sleep(.25)
if not intentos:
print "(soundcards) (!) No está disponible el puerto " + bareCard(
card) + " en jack"
jack.detach()
else:
print "(soundcards) <!> No se ha podido reiniciar " + mode + " en " + card + " " + rate
def __init__(self):
jack.attach("stream_grapher")
jack.register_port("in_1", jack.IsInput)
jack.register_port("in_2", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
jack.register_port("out_2", jack.IsOutput)
jack.activate()
try:
jack.connect("system:capture_1", "stream_grapher:in_1")
jack.connect("system:capture_2", "stream_grapher:in_2")
jack.connect("stream_grapher:out_1", "system:playback_1")
jack.connect("stream_grapher:out_2", "system:playback_2")
except jack.UsageError:
pass
buff_size = jack.get_buffer_size()
if buff_size < 1024:
print >> sys.stderr, "Jack buffer size is %d. If you have sync problems try a buff size >= 1024." % (buff_size, )
self.buff_size = jack.get_buffer_size()
sample_rate = jack.get_sample_rate()
Backend.__init__(self, ports=2, sample_rate=sample_rate)
self.capture = numpy.zeros((2, self.buff_size), 'f')
self.output = numpy.zeros((2, self.buff_size), 'f')
self.counter = [0]
self.last_counter = 0
# Time to sleep between calls to jack.process
# R should be at least 1.0
# To never get InputSyncErrors R should be like 2.0 or higher
R = 1.2
self.sleep = self.buff_size / float(self.sample_rate) / R
def unroute(source, destination):
try:
jack.disconnect(source, destination)
except jack.NotConnectedError:
jack.attach("studio-webapp")
jack.disconnect(source, destination)
return ''
def unroute(source, destination):
try:
jack.disconnect(source, destination)
except jack.NotConnectedError:
jack.attach("studio-webapp")
jack.disconnect(source, destination)
return ''
def connect(self):
try :
jack.attach("sooperlooper")
jack.activate()
jack.connect("sooperlooper:common_out_1", "alsa_pcm:playback_1")
jack.connect("sooperlooper:common_out_2", "alsa_pcm:playback_2")
except :
print("Run jack and sooperlooper")
sys.exit(1)
def run(self):
self.ALSA()
self.GST()
jack.attach(self.exe.handler.server.name)
jack.activate()
self.Jack()
self.Play()
self.cleanup()
return self.statuses
def track_playback_started(self, tl_track):
print "Attaching to jack."
jack.attach("default")
print "Attached."
print "Jack ports: %s", jack.get_ports()
print "Track playback started. Time for some JACK magic."
# Connect the specified JACK ports together.
jack.connect("mopidy:out_jackaudiosink0_1","python:in_openob_tx_test-link_1")
jack.connect("mopidy:out_jackaudiosink0_2","python:in_openob_tx_test-link_2")
def __init__(self, url):
log.info("Opening JACK input")
jack.attach("Noter Virtual Keyboard")
self.rate = jack.get_sample_rate()
jack.activate()
jack.register_port("Input 1", jack.IsInput)
jack.register_port("Input 2", jack.IsInput)
jack.connect("system:capture_1", "Noter Virtual Keyboard:Input 1")
jack.connect("system:capture_2", "Noter Virtual Keyboard:Input 2")
self.buffer_size = jack.get_buffer_size()
self.input = numpy.zeros((2, self.buffer_size), 'f')
self.output = numpy.zeros((2, self.buffer_size), 'f')
def load_jt(options):
""" arranca jacktrip y lo primero que hacemos es deshacer la conexión
automática que jacktrip hace a los puertos system de jack (!)
Las opciones pueden ser:
-c remoteHost (modo cliente)
-s (modo servidor)
"""
# muteamos la tarjeta de sonido
sc.alsa_mute_system_card("on")
# arranca jacktrip
Popen("killall jacktrip", shell=True)
sleep(.5)
Popen("jacktrip -z -q 8 -r 2 " + options + " >/dev/null 2>&1", shell=True)
# esperamos a jacktrip:
intentos = 20 # * 0.25 = 5 segundos
while intentos:
try:
if "JackTrip" in check_output("jack_lsp", shell=True):
print "(jacktrip.py) Ha arrancado Jacktrip."
break
except:
pass
intentos -= 1
sleep(.25)
if not intentos:
print "(jacktrip.py) Error arrancando Jacktrip"
sys_exit(-1)
# (!) lo primero deshacemos la conexión automática a system
jack.attach("tmp")
jack.disconnect("JackTrip:receive_1", "system:playback_1")
jack.disconnect("JackTrip:receive_2", "system:playback_2")
try:
jack.disconnect("system:capture_1", "JackTrip:send_1")
jack.disconnect("system:capture_2", "JackTrip:send_2")
except:
# es posible que sea un FIRtro pequeño sin system:capture
pass
jack.detach()
# modo client
if "-c" in options:
# La conexión a FIRtro se gestiona cambiando la input en FIRtro.
pass
# modo server
if "-s" in options:
connect_source2jacktrip()
sc.alsa_mute_system_card("off")
def change_input(input_name, in_ports, out_ports, resampled="no"):
# 'in_ports': Lista [L,R] de los puertos capture de jack de la fuente elegida
# 'out_ports': Lista de los puertos de la variable 'firtro_ports' que se resuelve
# en server_process en función de si se usa Brutefir/Ecasound
# FIRtro2: evaluamos si la entrada requiere resampling por estar en una tarjeta adicional
if resampled <> "no":
sc.external_card_resync(in_ports, resampled)
# CONMUTADOR, como el original de FIRtro1.
try:
jack.attach("tmp")
# Desconectamos todo lo que hubiera en la entrada de FIRtro (y en los posibles monitores):
desconecta_fuentes_de(out_ports)
# Posibles PAUSAS opcionales en los PLAYERS INTEGRADOS (ahorro de %CPU):
players.manage_pauses(input_name)
# Y ahora conectamos la entrada deseada a FIRtro y a los monitores:
for i in range(len(in_ports)):
# Entradas a FIRtro
try:
jack_connect(in_ports[i], out_ports[i])
except:
logging.exception("error conectando " + in_ports[i] + " <> " +
out_ports[i])
# Los monitores opcionales:
try:
if ext_monitor_ports:
jack_connect(in_ports[i], ext_monitor_ports[i])
jack_connect(in_ports[i], int_monitor_ports[i])
except:
logging.exception("error en conexion de monitores")
jack.detach()
except:
# Si hay alguna excepción devolvemos boolean False
logging.exception("error en cuerpo ppal")
jack.detach()
print "(server_input) Problemas (ver ~/tmp/server_input.log)"
return False
# Y si todo ha ido bien, devolvemos el boolean True
return True
def __init__(self, nscopes, subsamp_factor, length, zoom):
self.scopes = range(nscopes)
jack.attach("jscope")
print(jack.get_ports())
for i in self.scopes:
jack.register_port("in_%d" % (i), jack.IsInput)
jack.activate()
print jack.get_ports()
#jack.connect(jack.get_ports()[-2], "jscope:in_1")
# CONSTANTS
self.N = jack.get_buffer_size()
self.Sr = float(jack.get_sample_rate())
self.plotlength = length # plot length in seconds
self.abscissa = -np.arange(self.Sr * self.plotlength) / self.Sr
self.input_slice = np.zeros((nscopes, self.N), dtype='f')
self.output_slice = self.input_slice.copy()
self.fig = Figure()
self.subsamp_factor = subsamp_factor
self.ax = []
self.plot_data = []
self.l_plot_data = []
self.input_ring = []
self.output_ring = []
for i in self.scopes:
self.ax.append(self.fig.add_subplot(nscopes, 1, i + 1))
self.ax[i].set_ylim(-zoom, zoom)
self.plot_data.append([])
foo, = self.ax[i].plot([], self.plot_data[i])
self.l_plot_data.append(foo)
self.input_ring.append(RingBuffer(self.abscissa.size))
self.output_ring.append(RingBuffer(self.abscissa.size))
self.ax[i].set_xlim(self.abscissa[0], self.abscissa[-1])
self.ax[i].grid()
FigureCanvas.__init__(self, self.fig)
self.fig.canvas.draw()
self.timerEvent(None)
self.timer = self.startTimer(0)
def __init__(self, nscopes, subsamp_factor, length, zoom):
self.scopes = range(nscopes)
jack.attach("jscope")
print(jack.get_ports())
for i in self.scopes:
jack.register_port("in_%d" %(i), jack.IsInput)
jack.activate()
print jack.get_ports()
#jack.connect(jack.get_ports()[-2], "jscope:in_1")
# CONSTANTS
self.N = jack.get_buffer_size()
self.Sr = float(jack.get_sample_rate())
self.plotlength = length # plot length in seconds
self.abscissa = -np.arange(self.Sr*self.plotlength) / self.Sr
self.input_slice = np.zeros((nscopes, self.N), dtype='f')
self.output_slice = self.input_slice.copy()
self.fig = Figure()
self.subsamp_factor = subsamp_factor
self.ax = []
self.plot_data = []
self.l_plot_data = []
self.input_ring = []
self.output_ring = []
for i in self.scopes:
self.ax.append(self.fig.add_subplot(nscopes, 1, i+1))
self.ax[i].set_ylim(-zoom, zoom)
self.plot_data.append([])
foo, = self.ax[i].plot([], self.plot_data[i])
self.l_plot_data.append(foo)
self.input_ring.append(RingBuffer(self.abscissa.size))
self.output_ring.append(RingBuffer(self.abscissa.size))
self.ax[i].set_xlim(self.abscissa[0], self.abscissa[-1])
self.ax[i].grid()
FigureCanvas.__init__(self, self.fig)
self.fig.canvas.draw()
self.timerEvent(None)
self.timer = self.startTimer(0)
def open(self):
self.client = jack.attach('PythonClient')
myname = jack.get_client_name()
jack.register_port("in_1", jack.IsInput)
jack.register_port("in_2", jack.IsInput)
jack.register_port("out", jack.IsOutput)
self.client.activate()
print "Jack ports (before):", jack.get_ports()
jack.connect("system:capture_1", myname+":in_1")
def main():
try:
# Nos conectamos al servidor jack bajo el nombre "pecador"
jack.attach("pecador")
except:
print "algo va mal no puedorrr conectar a jack"
sys.exit()
# Lanzamos ebumeter. Ebumeter no admite argumentos,
# requiere conectar sus puertos en jack a posteriori.
dummy = Popen(["killall", "ebumeter"], stdout=None, stderr=None)
time.sleep(.5)
dummy = Popen(["ebumeter"], stdout=None, stderr=None)
time.sleep(.5)
# Conectamos a Ebumeter los mismos puertos que están conectados a Brutefir:
conect2ebumeter(BrutefirPorts())
# Nos desconectamos de Jack
jack.detach()
def index():
try:
ports = jack.get_ports()
except jack.NotConnectedError:
jack.attach('studio-webapp')
ports = jack.get_ports()
inports = []
outports = []
connects = {}
for port in ports:
if (jack.get_port_flags(port) & jack.IsInput) > 0:
inports.append(port)
connects[port] = jack.get_connections(port)
if (jack.get_port_flags(port) & jack.IsOutput) > 0:
outports.append(port)
try:
otg_systemd_status = subprocess.check_output(
['sudo', 'systemctl', 'is-active', 'studio-gaudio_in'])
except subprocess.CalledProcessError, e:
otg_systemd_status = 'failed'
def start(self):
import jack
jack.attach("NoteRecogniser Recorder")
jack.register_port("in_1", jack.IsInput)
jack.activate()
try:
jack.connect("system:capture_1", "NoteRecogniser Recorder:in_1")
jack.connect("system:capture_2", "NoteRecogniser Recorder:in_1")
except err:
print("Unable to connect to system:capture")
buffer_size = jack.get_buffer_size()
sample_rate = float(jack.get_sample_rate())
print "Buffer Size:", buffer_size, "Sample Rate:", sample_rate
output = scipy.zeros((1, buffer_size), 'f')
while True:
try:
input = scipy.zeros((1, buffer_size), 'f')
jack.process(output, input)
#print len(input)
fft = numpy.fft.rfft(input[0])
fft = map(
lambda c: math.sqrt(c.real * c.real + c.imag * c.imag),
fft)
#print(len(fft))
dominant = reduce(lambda y, x: x if x[1] > y[1] else y,
zip(range(len(fft)), fft), [0, 0])
print dominant
except jack.InputSyncError:
print "Input Sync Error"
pass
except jack.OutputSyncError:
print "Output Sync Error"
pass
def jackConexiones(nombrePuerto="", direccion="*"):
""" direccion: > | < | *
Devuelve una lista de tripletas:
(puerto, conexion, puerto)
"""
ports = []
jack.attach("tmp")
for puerto in [x for x in jack.get_ports() if nombrePuerto in x]:
conexiones = jack.get_connections(puerto)
for conexion in conexiones:
flags = jack.get_port_flags(conexion)
# Returns an integer which is the bitwise-or of all flags for a given port.
# haciendo pruebas veamos algunos flags de puertos:
# puertos escribibles (playback): 1 21 impares, ultimo bit a 1
# puertos leibles (capture) : 2 18 22 pares, ultimo bit a 0
if flags % 2:
direc = ">"
else:
direc = "<"
if direc == direccion or direccion == "*":
ports.append((puerto, " --" + direc + "-- ", conexion))
jack.detach()
return ports
def __init__(self, output='jack', numChannels = 2):
self.numChannels = numChannels
self.output = output
if output == 'jack':
# use pyjack
import jack
try:
jack.get_client_name()
except jack.NotConnectedError:
jack.attach('remix')
# not registering an input port makes the output sync
# consistently break after processing 2 buffers
# - bug in pyjack?
jack.register_port("in_1", jack.IsInput)
for i in range(0, self.numChannels):
jack.register_port("out_" + str(i+1), jack.IsOutput)
jack.activate()
for i in range(0, self.numChannels):
jack.connect("remix:out_" + str(i+1), "alsa_pcm:playback_" + str(i+1))
self.n = jack.get_buffer_size()
self.jackSampleRate = float(jack.get_sample_rate())
# loosing a buffer, here, see below
self._reset_jack()
def conecta_tarjeta(vias):
jack.attach("tmp")
# Disponemos de la funcion brutefir.outputsMap que contiene
# el mapeo de vias tal como esta definido en brutefir_config, por ejemplo:
# system:playback_3/hi_L
# system:playback_4/hi_R
# system:playback_7/lo_L
# system:playback_8/lo_R
# system:playback_5/sw1
# system:playback_6/sw2
to_disconnect=[]
to_connect = []
# Ahora debemos evaluar si es una salida a activar:
for bfOutMap in brutefir.outputsMap:
conectar = False
jackDest, bfOut = bfOutMap.split('/')
jackOrig = "brutefir:" + bfOut
for via in vias:
if via.lower() in bfOut.lower():
conectar = True
if conectar:
to_connect.append( (jackOrig, jackDest) )
else:
to_disconnect.append( (jackOrig, jackDest) )
for pair in to_disconnect:
jack.disconnect(pair[0], pair[1])
for pair in to_connect:
jack.connect(pair[0], pair[1])
jack.detach()
def connect_source2jacktrip():
jack.attach("tmp")
# Desconectamos lo que hubiera en JackTrip
c1_ports = jack.get_connections("JackTrip:send_1")
c2_ports = jack.get_connections("JackTrip:send_2")
for p1 in c1_ports:
jack.disconnect(p1, "JackTrip:send_1")
for p2 in c2_ports:
jack.disconnect(p2, "JackTrip:send_2")
try:
# conectamos las fuente del FIRtro a jacktrip
s1_ports = jack.get_connections(firtro_ports[0])
s2_ports = jack.get_connections(firtro_ports[1])
for s1 in s1_ports:
jack.connect(s1, "JackTrip:send_1")
for s2 in s2_ports:
jack.connect(s2, "JackTrip:send_2")
except:
# el motivo del fallo es que los puertos de JackTrip no están activos:
# "Cannot connect ports owned by inactive clients: "JackTrip" is not active"
# porque no ha sincronizado todavÃa con un cliente.
print "(jacktrip.py) (i) para conectar puertos se necesita que estén"
print " activos (con una conexion cliente jacktrip en red)"
jack.detach()
def start(self):
import jack
jack.attach("NoteRecogniser Recorder")
jack.register_port("in_1", jack.IsInput)
jack.activate()
try:
jack.connect("system:capture_1", "NoteRecogniser Recorder:in_1")
jack.connect("system:capture_2", "NoteRecogniser Recorder:in_1")
except err:
print ("Unable to connect to system:capture")
buffer_size = jack.get_buffer_size()
sample_rate = float(jack.get_sample_rate())
print "Buffer Size:", buffer_size, "Sample Rate:", sample_rate
output = scipy.zeros((1,buffer_size), 'f')
while True:
try:
input = scipy.zeros((1,buffer_size), 'f')
jack.process(output, input)
#print len(input)
fft = numpy.fft.rfft(input[0])
fft = map(lambda c : math.sqrt(c.real*c.real + c.imag*c.imag), fft)
#print(len(fft))
dominant = reduce(lambda y,x: x if x[1] > y[1] else y, zip(range(len(fft)), fft), [0,0])
print dominant
except jack.InputSyncError:
print "Input Sync Error"
pass
except jack.OutputSyncError:
print "Output Sync Error"
pass
import time
import jack
import soundfile
import arduino
import telephone
import numpy
import conversation
import socket
import gobject
gobject.threads_init()
print "Connecting to jackd"
jack.attach("pleasehold")
# All sound works via jackd -- so if you want multiple sound cards, then glue them together with ALSA
from tempfile import TemporaryFile
outfile = TemporaryFile()
conversations = list()
telephones = list()
barqueue = list()
phonemap = ['44','41','50','58','56','54','51','9','57','43','40','53','52','55','59']
if not "rose" in open("/etc/hostname").read():
channels = 15
def attach(self):
jack.attach(self.name)
def init(ini, device, alsaClients, _tempo, _measureLength, debugLevel):
'''Initiate all variables an devices/classes.'''
global seq, mon, buttons, tracks, tempo, measureLength
tempo = _tempo
measureLength = _measureLength
# init logging
numeric_level = getattr(logging, debugLevel.upper(), None)
if not isinstance(numeric_level, int):
raise ValueError('Invalid log level: %s' % loglevel)
logging.basicConfig(level=numeric_level,
format='[%(levelname)s] %(asctime)s - %(message)s')
# initiate MIDI sequencer
seq = midi.sequencer.SequencerWrite(alsa_sequencer_name='moseq',
alsa_port_name='moseq in',
alsa_queue_name='moseq queue')
hardware = midi.sequencer.SequencerHardware()
for iclient in alsaClients:
# split string at ':'
tmp = iclient.split(':')
if len(tmp) <= 1:
port = '0'
else:
port = tmp[1]
client = tmp[0]
try:
# try to parse integers
port = int(port)
try:
client = int(client)
except ValueError:
# fallback: handle named client name
client = hardware.get_client(client).client
except ValueError:
# fallback: handle named client and port
client, port = hardware.get_client_and_port(client, port)
seq.subscribe_port(client, port)
seq.start_sequencer()
# init monome
mon = monome.Monome(device)
mon.led_all(0)
buttons = [[0 for x in range(mon.columns)] for y in range(mon.rows)]
# init connection to jack
jack.attach('moseq')
# read in config file and init tracks
parser = ConfigParser.SafeConfigParser()
parser.read(ini)
regSection = re.compile(r'track(?P<track>[0-9]+)')
for isec in parser.sections():
m = regSection.match(isec)
if not m:
# no track configuration section... ignore
continue
try:
# get track number
i = int(m.group('track'))
# init a new Track
vals = dict(parser.items(isec))
tracks[i] = Track(mon.columns,
startEvent=vals.get('start'),
stopEvent=vals.get('stop'),
channel=int(vals.get('channel', -1)),
tickOffset=vals.get('tickOffset', 0))
except ValueError:
continue
# start main loop
print 'Starting main loop...'
loop()
#!/usr/bin/python
import jack
import time
name="default"
time.sleep(1)
jack.attach(name)
bs=jack.get_buffer_size()
print("'%s'.buffer_size = %d" % (name, bs));
# self.update_time += 20
# print("setting update time to %d" %(self.update_time))
pass
except jack.OutputSyncError:
print "Output Sync Error"
pass
def reset_view():
[p.setYRange(-1, 1) for p in plots]
[p.enableAutoRange(axis=pg.ViewBox.XAxis, enable=True)]
# initialize jack connections
nscopes = 1
jack.attach("jscope")
for i in range(nscopes):
jack.register_port("in_%d" % (i), jack.IsInput)
jack.activate()
N = jack.get_buffer_size()
Sr = float(jack.get_sample_rate())
print (Sr)
plotlength = 0.3
abscissa = np.flipud(-np.arange(Sr * plotlength) / Sr)
print (len(abscissa))
resample_factor = int(abscissa.size / 1000)
rings = [RingBuffer(len(abscissa)) for i in range(nscopes)]
input_slice = np.zeros((nscopes, N), dtype="f")
output_slice = input_slice.copy()
#!/usr/bin/python
# Capture 3 seconds of stereo audio from alsa_pcm:capture_1/2; then play it back.
#
# Copyright 2003, Andrew W. Schmeder
# This source code is released under the terms of the GNU Public License.
# See LICENSE for the full text of these terms.
import Numeric
import jack
import time
from numpy.fft import rfft
from pylab import *
from numpy import *
import math
jack.attach("fftknn")
print jack.get_ports()
jack.register_port("in_1", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
jack.activate()
# jack.connect("alsa_pcm:capture_1", "fftknn:in_1")
# jack.connect("Hydrogen-1:out_L", "fftknn:in_1")
# jack.connect("pure_data_0:output0", "fftknn:in_1")
# jack.connect("sooperlooper:common_out_1", "fftknn:in_1")
print jack.get_connections("fftknn:in_1")
# Parse LED specification, create multiclient
leds = arguments["<leds>"].split(",")
client = clients[0]
ledtuples = []
for led in leds:
led = led.split(":", 1)
if len(led) >= 2:
client = clients[int(led.pop(0)) - 1]
ledtuples.append((client, int(led[0])))
client = ledp.MultiClient(ledtuples)
leds = range(len(ledtuples))
# Setup JACK interface
jack.attach(arguments["--name"])
jack.register_port("input",
jack.IsInput | jack.IsTerminal | jack.IsPhysical)
buffer_size = jack.get_buffer_size()
sample_rate = jack.get_sample_rate()
def buffer_size_callback():
raise Exception("buffer size changed and I can't take that")
exit(2)
#jack.set_buffer_size_callback(buffer_size_callback) #FIXME
def sample_rate_callback():
raise Exception("sample rate changed and I can't take that")
exit(2)
#jack.set_sample_rate_callback(sample_rate_callback) #FIXME
def attach_to_jack(self):
jack.attach("mainserver")
# Parse LED specification, create multiclient
leds = arguments["<leds>"].split(",")
client = clients[0]
ledtuples = []
for led in leds:
led = led.split(":", 1)
if len(led) >= 2:
client = clients[int(led.pop(0)) - 1]
ledtuples.append((client, int(led[0])))
client = ledp.MultiClient(ledtuples)
leds = range(len(ledtuples))
# Setup JACK interface
jack.attach(arguments["--name"])
jack.register_port("input", jack.IsInput | jack.IsTerminal | jack.IsPhysical)
buffer_size = jack.get_buffer_size()
sample_rate = jack.get_sample_rate()
def buffer_size_callback():
raise Exception("buffer size changed and I can't take that")
exit(2)
#jack.set_buffer_size_callback(buffer_size_callback) #FIXME
def sample_rate_callback():
raise Exception("sample rate changed and I can't take that")
exit(2)
#jack.set_sample_rate_callback(sample_rate_callback) #FIXME
jack_input = np.zeros((1, buffer_size), 'f')
jack_output = np.zeros((0, buffer_size), 'f')
#!/usr/bin/python
# Capture 3 seconds of stereo audio from alsa_pcm:capture_1/2; then play it back.
#
# Copyright 2003, Andrew W. Schmeder
# This source code is released under the terms of the GNU Public License.
# See LICENSE for the full text of these terms.
import Numeric
import jack
import time
from numpy.fft import rfft
from pylab import *
from numpy import *
import math
jack.attach("fftknn")
print jack.get_ports()
jack.register_port("in_1", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
jack.activate()
# jack.connect("alsa_pcm:capture_1", "fftknn:in_1")
# jack.connect("Hydrogen-1:out_L", "fftknn:in_1")
# jack.connect("pure_data_0:output0", "fftknn:in_1")
# jack.connect("sooperlooper:common_out_1", "fftknn:in_1")
print jack.get_connections("fftknn:in_1")
def attach(self):
jack.attach(self.name)
from Blender import *
play_button = Draw.Create(False)
BEV_PLAY = 1
BEV_EXIT = 2
BEV_PREV = 3
BEV_NEXT = 4
BEV_START = 5
ret_blender_curr = 0
ret_blender_next = 0
ret_jack_current = 0
prev_blen = 0
prev_jack = 0
try:
jack.attach("/var/run/jack-blender")
except jack.UsageError:
pass # continue using exist jack if script crashed but jack still online
def getFrames():
global ret_blender_curr
global ret_blender_next
global ret_jack_current
currblenframe = Get("curframe")
currjackframe = jack.get_current_transport_frame()
rate = jack.get_sample_rate()
fps = Scene.GetCurrent().getRenderingContext().fps
curve = visual.curve(color=visual.color.white, display=self.g, radius=0)
for point in zip(range(len(data)),data):
r = g = b = 1
curve.append(pos=(point[0],point[1] * 10,0), color=(r,g,b))
self.curves.insert(0,curve)
#out = alsaaudio.PCM(alsaaudio.PCM_PLAYBACK)
#out.setchannels(1)
#out.setrate(rate)
#out.setformat(alsaaudio.PCM_FORMAT_S16_LE)
#out.setperiodsize(slen)
#inp = alsaaudio.PCM(alsaaudio.PCM_CAPTURE,alsaaudio.PCM_NONBLOCK)
jack.attach("captest")
jack.register_port("in_1", jack.IsInput)
#jack.register_port("in_2", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
#jack.register_port("out_2", jack.IsOutput)
jack.activate()
jack.connect("system:capture_1", "captest:in_1")
jack.connect("system:capture_2", "captest:in_1")
jack.connect("captest:out_1", "system:playback_1")
jack.connect("captest:out_1", "system:playback_2")
buffer_size = jack.get_buffer_size()
sample_rate = float(jack.get_sample_rate())
elif opc.startswith("sink="):
sink = str(opc.split("=")[-1])
elif opc.startswith("name="):
ownname = str(opc.split("=")[-1])
elif opc == "-d":
disconnect = True
elif "-h" in opc:
print __doc__
sys.exit()
# Nos atachamos a jackd
jack.attach(ownname)
# Creamos los puertos de esta instancia
for i in range(1, 1 + nchannels):
jack.register_port('out_' + str(i), jack.IsOutput)
jack.register_port("in_" + str(i), jack.IsInput)
# Activamos los puertos
jack.activate()
# Conectamos los puertos de captura y playback deseados:
if source:
if disconnect:
conecta(source, sink, mode='disconnect')
conecta(source, ownname, mode='connect')
if sink:
def __init__(self, manager, **kwargs):
super(Speaker, self).__init__(**kwargs)
self._manager = manager
jack.attach("sooperlooper")
jack.activate()
#!/usr/bin/python
# -*- coding: utf-8 -*-
import jack, os, sys
from PyQt4.QtGui import QApplication, QDialog
from PyQt4.QtCore import QTimer, SIGNAL, SLOT
from PyQt4.uic import loadUi
jack.attach("qtransport")
class MainW(QDialog):
def __init__(self, *args):
QDialog.__init__(self, *args)
loadUi(sys.path[0] + "/qtransport_gui.ui", self)
self.timer = QTimer()
self.timer.start(100)
self.connect(self.b_back, SIGNAL("clicked()"), self.goBack)
self.connect(self.b_play, SIGNAL("clicked()"), self.play)
self.connect(self.b_stop, SIGNAL("clicked()"), self.stop)
self.connect(self.b_forward, SIGNAL("clicked()"), self.goForward)
self.connect(self.timer, SIGNAL("timeout()"), self.refreshUi)
def goBack(self):
pos = int(jack.get_current_transport_frame()) - 100000
if pos < 0:
jack.transport_locate(0)
else:
jack.transport_locate(pos)
import jack
def print_time ():
print ("current time: %f s" % (
float(jack.get_current_transport_frame())/jack.get_sample_rate()
)
)
#testing position set/get
from time import sleep
jack.attach("/var/run/jack")
print ("getting current time")
print_time()
print ("going to frame 0")
jack.transport_locate(0)
sleep (0.2)
print ("getting current time")
print_time()
sleep (0.2)
print ("going to 6 sec")
jack.transport_locate(jack.get_sample_rate()*6)
sleep (0.2)
print ("getting current time")
print_time()
#testing state set/get
def print_state():
state = jack.get_transport_state()
#!/usr/bin/python
# -*- coding: utf-8 -*-
import jack, os, sys
from PyQt4.QtGui import QApplication, QDialog
from PyQt4.QtCore import QTimer, SIGNAL, SLOT
from PyQt4.uic import loadUi
jack.attach("qtransport")
class MainW(QDialog):
def __init__(self, *args):
QDialog.__init__(self, *args)
loadUi(sys.path[0]+"/qtransport_gui.ui", self)
self.timer = QTimer()
self.timer.start(100)
self.connect(self.b_back, SIGNAL("clicked()"), self.goBack)
self.connect(self.b_play, SIGNAL("clicked()"), self.play)
self.connect(self.b_stop, SIGNAL("clicked()"), self.stop)
self.connect(self.b_forward, SIGNAL("clicked()"), self.goForward)
self.connect(self.timer, SIGNAL("timeout()"), self.refreshUi)
def goBack(self):
pos = int(jack.get_current_transport_frame()) - 100000
if pos < 0:
jack.transport_locate(0)
else:
jack.transport_locate(pos)
time = float(jack.get_current_transport_frame()) / jack.get_sample_rate()
print "current time: %f s" % time
#testing state set/get
def print_state():
state = jack.get_transport_state()
statename = {
jack.TransportStopped:"stopped",
jack.TransportRolling:"rolling",
jack.TransportStarting:"starting"
} [state]
print("current state is %i (%s)"% (state, statename))
#testing position set/get
from time import sleep
jack.attach("transporter.py")
print ("getting current time")
print_time()
print ("going to frame 0")
jack.transport_locate(0)
sleep (2)
print ("getting current time")
print_time()
sleep (0.5)
print ("going to 6 sec")
jack.transport_locate(jack.get_sample_rate()*6)
sleep (2)
print ("getting current time")
#testing state set/get
def print_state():
state = jack.get_transport_state()
statename = {
jack.TransportStopped: "stopped",
jack.TransportRolling: "rolling",
jack.TransportStarting: "starting"
}[state]
print("current state is %i (%s)" % (state, statename))
#testing position set/get
from time import sleep
jack.attach("transporter.py")
print("getting current time")
print_time()
print("going to frame 0")
jack.transport_locate(0)
sleep(2)
print("getting current time")
print_time()
sleep(0.5)
print("going to 6 sec")
jack.transport_locate(jack.get_sample_rate() * 6)
sleep(2)
print("getting current time")
output_n = 2
print 'Minimum output port number is 2'
elif args.outports > 10:
if channels == 2:
output_n = 10
print 'Sorry, 20 outputs is the maximum output port number'
elif args.outports > 20:
output_n = 20
print 'Sorry, 20 outputs is the maximum output port number'
else:
output_n = args.outports
output_ports = [True] + [False]*(output_n-1) if output_n>0 else []
active = 0
jack.attach(client_name)
buf_size = jack.get_buffer_size()
#sam_size = float(jack.get_sample_rate())
#capture = numpy.zeros((2,int(sam_size)), 'f')
input_stream = numpy.zeros((channels, buf_size), 'f')
empty_stream = numpy.zeros((channels, buf_size), 'f')
#output_stream = numpy.zeros((4, buf_size), 'f')
#input_buffer = numpy.zeros((2, buf_size), 'f')
input_ports = []
if channels == 2:
jack.register_port('input L', jack.IsInput)
input_ports.append(client_name + ':' + 'input L')
jack.register_port('input R', jack.IsInput)
input_ports.append(client_name + ':' + 'input R')
import jack
def print_time():
print("current time: %f s" %
(float(jack.get_current_transport_frame()) / jack.get_sample_rate()))
#testing position set/get
from time import sleep
jack.attach("/var/run/jack")
print("getting current time")
print_time()
print("going to frame 0")
jack.transport_locate(0)
sleep(0.2)
print("getting current time")
print_time()
sleep(0.2)
print("going to 6 sec")
jack.transport_locate(jack.get_sample_rate() * 6)
sleep(0.2)
print("getting current time")
print_time()
#testing state set/get
def print_state():
#!/usr/bin/python
import jack
import time
name = "default"
time.sleep(1)
jack.attach(name)
bs = jack.get_buffer_size()
print("'%s'.buffer_size = %d" % (name, bs))
#!/usr/bin/python
# -*- coding: utf-8 -*-
# Plays a 440.0 Hz test tone for 3 seconds to alsa_pcm:playback_1.
#
# Copyright 2003, Andrew W. Schmeder
# This source code is released under the terms of the GNU Public License.
# See LICENSE for the full text of these terms.
import numpy
import jack
import pysoundfile
import time
jack.attach("pymetro")
jack.register_port("out_1", jack.IsOutput)
jack.register_port("in_1", jack.IsInput)
jack.activate()
#print(jack.get_ports())
jack.connect("pymetro:out_1", "system:playback_1")
jack.connect("pymetro:out_1", "system:playback_2")
N = jack.get_buffer_size()
Sr = float(jack.get_sample_rate())
output_file = pysoundfile.SoundFile('MetronomeUp.wav')
output = output_file.read()
output = 0.225*output/numpy.max(output)
print(output.shape)
input = numpy.zeros((1,N), 'f')
print(N)
radius=0)
for point in zip(range(len(data)), data):
r = g = b = 1
curve.append(pos=(point[0], point[1] * 10, 0), color=(r, g, b))
self.curves.insert(0, curve)
#out = alsaaudio.PCM(alsaaudio.PCM_PLAYBACK)
#out.setchannels(1)
#out.setrate(rate)
#out.setformat(alsaaudio.PCM_FORMAT_S16_LE)
#out.setperiodsize(slen)
#inp = alsaaudio.PCM(alsaaudio.PCM_CAPTURE,alsaaudio.PCM_NONBLOCK)
jack.attach("captest")
jack.register_port("in_1", jack.IsInput)
#jack.register_port("in_2", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
#jack.register_port("out_2", jack.IsOutput)
jack.activate()
jack.connect("system:capture_1", "captest:in_1")
jack.connect("system:capture_2", "captest:in_1")
jack.connect("captest:out_1", "system:playback_1")
jack.connect("captest:out_1", "system:playback_2")
buffer_size = jack.get_buffer_size()
sample_rate = float(jack.get_sample_rate())
out_buffer[0,i]=self.sample[int(self.playpos)]
self.playpos+=self.playstep
return out_buffer
def setNote(self, note):
print("got note ", note)
semitones=note-self.keynote
self.note=note
self.playstep=2**(semitones/12.0)
self.playpos=0
def stopNote(self,note):
if note==self.note:
self.note=0
self.playpos=0
self.playstep=0
jack.attach("pysampl")
jack.register_port("out_1", jack.IsOutput)
jack.register_port("in_1", jack.IsInput)
jack.activate()
jack.connect("pysampl:out_1", "system:playback_1")
jack.connect("pysampl:out_1", "system:playback_2")
N = jack.get_buffer_size()
Sr = float(jack.get_sample_rate())
input_buf = numpy.zeros((1,N), 'f')
output, samplerate = soundfile.read('Sample.wav')
output = 0.225*output/numpy.max(output)
mysampl = sampler(output, 60)
import threading
import time
import Queue
import jack
from util import nanosleep
from models import Sequence
jack.attach("dseq")
def get_time():
return float(jack.get_current_transport_frame()) / jack.get_sample_rate()
#testing state set/get
def get_state():
return jack.get_transport_state()
time.sleep = nanosleep.nanosleep
TICKS_PER_BEAT = 24
class PlayerThreadSong(threading.Thread):
def __init__(self, conn):
threading.Thread.__init__(self)
#Position means pattern if playing a channel, or cursor pos if playing pattern
self.__pos = 0
self.__conn = conn
self.__quit = False
self.__playing = False
self.__repeat = False
def play(self, data, bpm, repeat = False):
if hue < 1 / 6.0:
r, g, b = 1, scaler, 0
elif hue < 2 / 6.0:
r, g, b = 1 - scaler, 1, 0
elif hue < 3 / 6.0:
r, g, b = 0, 1, scaler
elif hue < 4 / 6.0:
r, g, b = 0, 1 - scaler, 1
elif hue < 5 / 6.0:
r, g, b = scaler, 0, 1
else:
r, g, b = 1, 0, 1 - scaler
return r, g, b
jack.attach("colours")
jack.register_port("in", jack.IsInput)
jack.activate()
jack.connect("system:capture_1", "colours:in")
buff = jack.get_buffer_size()
rate = jack.get_sample_rate()
freqs = np.fft.fftfreq(buff, 1.0 / rate)[: buff / 2]
hues = array([(log2(F) - log2(440)) % 1 for F in freqs])
hue_order = array(sorted(enumerate(hues[1:], 1), key=lambda f: f[1]), "i").T[0]
freq_rgb = array([hue_to_rgb(h) for h in hues])
capture = np.zeros((1, buff), "f")
dummy = np.zeros((0, 0), "f")
scale_windowsize = int(300 / UPDATE_INTERVAL)
vu_value = TARGET_CHANNELS * [0]
random_gain = TARGET_CHANNELS * [1.0]
net = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
net.connect((CCC_HOST, CCC_PORT))
net.send('VU')
time_update = time.time()
time_random = time_update
if AUDIO_MODE == 'alsa':
framesize = 1024
rate = 22050
pipe = os.popen('arecord -N -c 1 -r %d -f S16_LE' % (rate,), 'r', 0)
elif AUDIO_MODE == 'jack':
jack.attach('VU-Meter')
jack.register_port('in_1', jack.IsInput)
jack.register_port('out_1', jack.IsOutput)
jack.activate()
# jack.connect('alsa_pcm:capture_1', 'VU-Meter:in_1')
jack.connect('system:capture_1', 'VU-Meter:in_1')
framesize = jack.get_buffer_size()
rate = jack.get_sample_rate()
input_array = numpy.zeros((1, framesize), 'f')
output_array = numpy.zeros((1, framesize), 'f')
try:
while True:
if AUDIO_MODE == 'alsa':
rms = 0.0
frame = pipe.read(framesize * 2) # 2 bytes per sample (16-bit)
info.append("(i) conectando "+ o + " " + d)
jack.connect(o,d)
# Conectamos los pares:
for o in source_ports[1::2]:
for d in getDisplaysPorts()[1::2]:
info.append("(i) conectando "+ o + " " + d)
jack.connect(o,d)
if info:
for cosa in info:
print cosa
else:
print "(?) nada que conectar"
if __name__ == "__main__":
try:
# Nos conectamos al servidor jack bajo el nombre "tmp" por poner algo
jack.attach("tmp")
conectaDISPLAYS()
jack.detach()
except:
print "problemas de conexion python a JACK, que lo sepas"
#!/usr/bin/python
# -*- coding: utf-8 -*-
# Plays a 440.0 Hz test tone for 3 seconds to alsa_pcm:playback_1.
#
# Copyright 2003, Andrew W. Schmeder
# This source code is released under the terms of the GNU Public License.
# See LICENSE for the full text of these terms.
import numpy
import jack
jack.attach("testtone")
jack.register_port("in_1", jack.IsInput)
jack.register_port("out_1", jack.IsOutput)
jack.activate()
jack.connect("testtone:out_1", "alsa_pcm:playback_1")
N = jack.get_buffer_size()
Sr = float(jack.get_sample_rate())
print "Buffer Size:", N, "Sample Rate:", Sr
sec = 3.0
input = numpy.zeros((1,N), 'f')
output = numpy.reshape(
numpy.sin(
2*numpy.pi*440.0 * (numpy.arange(0, sec, 1.0/(Sr), 'f')[0:int(Sr*sec)])
), (1, Sr*sec)).astype('f')
i = 0
while i < output.shape[1] - N:
try:
def init(ini, device, alsaClients, _tempo, _measureLength, debugLevel):
"""Initiate all variables an devices/classes."""
global seq, mon, buttons, tracks, tempo, measureLength
tempo = _tempo
measureLength = _measureLength
# init logging
numeric_level = getattr(logging, debugLevel.upper(), None)
if not isinstance(numeric_level, int):
raise ValueError("Invalid log level: %s" % loglevel)
logging.basicConfig(level=numeric_level, format="[%(levelname)s] %(asctime)s - %(message)s")
# initiate MIDI sequencer
seq = midi.sequencer.SequencerWrite(
alsa_sequencer_name="moseq", alsa_port_name="moseq in", alsa_queue_name="moseq queue"
)
hardware = midi.sequencer.SequencerHardware()
for iclient in alsaClients:
# split string at ':'
tmp = iclient.split(":")
if len(tmp) <= 1:
port = "0"
else:
port = tmp[1]
client = tmp[0]
try:
# try to parse integers
port = int(port)
try:
client = int(client)
except ValueError:
# fallback: handle named client name
client = hardware.get_client(client).client
except ValueError:
# fallback: handle named client and port
client, port = hardware.get_client_and_port(client, port)
seq.subscribe_port(client, port)
seq.start_sequencer()
# init monome
mon = monome.Monome(device)
mon.led_all(0)
buttons = [[0 for x in range(mon.columns)] for y in range(mon.rows)]
# init connection to jack
jack.attach("moseq")
# read in config file and init tracks
parser = ConfigParser.SafeConfigParser()
parser.read(ini)
regSection = re.compile(r"track(?P<track>[0-9]+)")
for isec in parser.sections():
m = regSection.match(isec)
if not m:
# no track configuration section... ignore
continue
try:
# get track number
i = int(m.group("track"))
# init a new Track
vals = dict(parser.items(isec))
tracks[i] = Track(
mon.columns,
startEvent=vals.get("start"),
stopEvent=vals.get("stop"),
channel=int(vals.get("channel", -1)),
tickOffset=vals.get("tickOffset", 0),
)
except ValueError:
continue
# start main loop
print "Starting main loop..."
loop()