def setup():
"""
Setup test module. Compile test model (only needs to be done once) and
set log level.
"""
OptimicaCompiler.set_log_level(OptimicaCompiler.LOG_ERROR)
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
oc.set_boolean_option('eliminate_alias_variables', True)
oc.compile_model(fpath, cpath)
def run_demo(with_plots=True):
"""Demonstrate how to solve a minimum time
dynamic optimization problem based on a
Van der Pol oscillator system."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed',True)
curr_dir = os.path.dirname(os.path.abspath(__file__));
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir+"/files/VDP.mo",
"VDP_pack.VDP_Opt",
target='ipopt')
# Load the dynamic library and XML data
vdp=jmi.Model("VDP_pack_VDP_Opt")
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e)*1./n_e # Equidistant points
n_cp = 3; # Number of collocation points in each element
# Create an NLP object
nlp = ipopt.NLPCollocationLagrangePolynomials(vdp,n_e,hs,n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
# nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter",500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Retreive the number of points in each column in the
# result matrix
n_points = nlp.opt_sim_get_result_variable_vector_length()
# Write to file. The resulting file can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('VDP_pack_VDP_Opt_result.txt')
# Extract variable profiles
x1=res.get_variable_data('x1')
x2=res.get_variable_data('x2')
u=res.get_variable_data('u')
cost=res.get_variable_data('cost')
assert N.abs(cost.x[-1] - 2.3469089e+01) < 1e-3, \
"Wrong value of cost function in vdp.py"
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(311)
plt.plot(x1.t,x1.x)
plt.grid()
plt.ylabel('x1')
plt.subplot(312)
plt.plot(x2.t,x2.x)
plt.grid()
plt.ylabel('x2')
plt.subplot(313)
plt.plot(u.t,u.x)
plt.grid()
plt.ylabel('u')
plt.xlabel('time')
plt.show()
import jmodelica
from jmodelica.tests import testattr
from jmodelica.compiler import OptimicaCompiler
from jmodelica import jmi
from jmodelica.initialization.ipopt import NLPInitialization
from jmodelica.initialization.ipopt import InitializationOptimizer
int = N.int32
N.int = N.int32
jm_home = jmodelica.environ['JMODELICA_HOME']
path_to_examples = os.path.join('Python', 'jmodelica', 'examples')
path_to_tests = os.path.join(jm_home, "Python", "jmodelica", "tests")
oc = OptimicaCompiler()
model = os.path.join('files', 'CSTR.mo')
fpath = os.path.join(jm_home, path_to_examples, model)
cpath = "CSTR.CSTR_Init"
fname = cpath.replace('.', '_')
oc.compile_model(fpath, cpath, 'ipopt')
class TestNLPInit:
""" Tests for NLPCollocation wrapper methods.
"""
def setUp(self):
"""Test setUp. Load the test model."""
cstr = jmi.Model(fname)
def run_demo(with_plots=True):
"""Demonstrate how to solve a dynamic optimization
problem based on an inverted pendulum system."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Comile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/Pendulum_pack.mo",
"Pendulum_pack.Pendulum_Opt",
target='ipopt')
# Load the dynamic library and XML data
pend = jmi.Model("Pendulum_pack_Pendulum_Opt")
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = jmi.SimultaneousOptLagPols(pend, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = jmi.JMISimultaneousOptIPOPT(nlp.jmi_simoptlagpols)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Retreive the number of points in each column in the
# result matrix
n_points = nlp.jmi_simoptlagpols.opt_sim_get_result_variable_vector_length(
)
n_points = n_points.value
# Create result data vectors
p_opt = N.zeros(1)
t_ = N.zeros(n_points)
dx_ = N.zeros(5 * n_points)
x_ = N.zeros(5 * n_points)
u_ = N.zeros(n_points)
w_ = N.zeros(n_points)
# Get the result
nlp.jmi_simoptlagpols.opt_sim_get_result(p_opt, t_, dx_, x_, u_, w_)
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(t_, x_[n_points:2 * n_points])
plt.grid()
plt.ylabel('th')
plt.subplot(212)
plt.plot(t_, x_[n_points * 2:n_points * 3])
plt.grid()
plt.ylabel('dth')
plt.xlabel('time')
plt.show()
plt.figure(2)
plt.clf()
plt.subplot(311)
plt.plot(t_, x_[n_points * 3:n_points * 4])
plt.grid()
plt.ylabel('x')
plt.subplot(312)
plt.plot(t_, x_[n_points * 4:n_points * 5])
plt.grid()
plt.ylabel('dx')
plt.xlabel('time')
plt.subplot(313)
plt.plot(t_, u_)
plt.grid()
plt.ylabel('u')
plt.xlabel('time')
plt.show()
#
# You should have received a copy of the GNU Lesser General Public
# License along with CasADi; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
#
#
# -*- coding: utf-8 -*-
import casadi
from jmodelica.compiler import OptimicaCompiler
from jmodelica.compiler import ModelicaCompiler
import matplotlib.pyplot as plt
import numpy as NP
oc = OptimicaCompiler()
oc.set_boolean_option('generate_xml_equations', True)
#oc.compile_model("VDP_Opt","VDP.mo")
#mc = ModelicaCompiler()
#mc.compile_model("VDP","VDP2.mo")
# Allocate a parser and load the xml
#parser = casadi.FMIParser('VDP_Opt.xml')
parser = casadi.FMIParser(
'/home/janderss/dev/OPTICON-SOFTWARE/swig_interface/test/xml_files/VDP_pack_VDP_Opt.xml'
)
# Dump representation to screen
print "XML representation"
def run_demo(with_plots=True):
"""This example is based on the Hicks-Ray
Continuously Stirred Tank Reactors (CSTR) system. The system
has two states, the concentration and the temperature. The
control input to the system is the temperature of the cooling
flow in the reactor jacket. The chemical reaction in the reactor
is exothermic, and also temperature dependent; high temperature
results in high reaction rate.
The example demonstrates the following steps:
1. How to solve a DAE initialization problem. The initialization
model have equations specifying that all derivatives
should be identically zero, which implies that a
stationary solution is obtained. Two stationary points,
corresponding to different inputs, are computed. We call
the stationary points A and B respectively. point A corresponds
to operating conditions where the reactor is cold and
the reaction rate is low, whereas point B corresponds to
a higher temperature where the reaction rate is high.
For more information about the DAE initialization algorithm, see
http://www.jmodelica.org/page/10.
2. How to generate an initial guess for a direct collocation method
by means of simulation. The trajectories resulting from simulation
are used to initialize the variables in the transcribed NLP.
3. An optimal control problem is solved where the objective Is to
transfer the state of the system from stationary point A to point
B. The challenge is to ignite the reactor while avoiding
uncontrolled temperature increase. It is also demonstrated how to
set parameter and variable values in a model.
More information about the simultaneous optimization algorithm
can be found at http://www.jmodelica.org/page/10.
4. The optimization result is saved to file and then
the important variables are plotted.
5. Simulate the system with the optimal control profile. This step
is important in order to verify that the approximation in the
transcription step is valid.
"""
curr_dir = os.path.dirname(os.path.abspath(__file__));
# Create a Modelica compiler instance
oc = OptimicaCompiler()
# Compile the stationary initialization model into a DLL
oc.compile_model(curr_dir+"/files/CSTR.mo", "CSTR.CSTR_Init", target='ipopt')
# Load a model instance into Python
init_model = jmi.Model("CSTR_CSTR_Init")
# Create DAE initialization object.
init_nlp = NLPInitialization(init_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = InitializationOptimizer(init_nlp)
# Set inputs for Stationary point A
Tc_0_A = 250
init_model.set_value('Tc',Tc_0_A)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
# init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
c_0_A = init_model.get_value('c')
T_0_A = init_model.get_value('T')
# Print some data for stationary point A
print(' *** Stationary point A ***')
print('Tc = %f' % Tc_0_A)
print('c = %f' % c_0_A)
print('T = %f' % T_0_A)
# Set inputs for Stationary point B
Tc_0_B = 280
init_model.set_value('Tc',Tc_0_B)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
c_0_B = init_model.get_value('c')
T_0_B = init_model.get_value('T')
# Print some data for stationary point B
print(' *** Stationary point B ***')
print('Tc = %f' % Tc_0_B)
print('c = %f' % c_0_B)
print('T = %f' % T_0_B)
# Compute initial guess trajectories by means of simulation
# Create the time vector
t = N.linspace(1,150.,100)
# Create the input vector from the target input value. The
# target input value is here increased in order to get a
# better initial guess.
u = (Tc_0_B+35)*N.ones(N.size(t,0))
u = N.array([u])
u = N.transpose(u)
# Create a Trajectory object that can be passed to the simulator
u_traj = TrajectoryLinearInterpolation(t,u)
# Comile the Modelica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir+"/files/CSTR.mo","CSTR.CSTR_Init_Optimization",target='ipopt')
# Load the dynamic library and XML data
init_sim_model=jmi.Model("CSTR_CSTR_Init_Optimization")
# Set model parameters
init_sim_model.set_value('cstr.c_init',c_0_A)
init_sim_model.set_value('cstr.T_init',T_0_A)
init_sim_model.set_value('Tc_0',Tc_0_A)
init_sim_model.set_value('c_ref',c_0_B)
init_sim_model.set_value('T_ref',T_0_B)
init_sim_model.set_value('Tc_ref',u_traj.eval(0.)[0])
# Create DAE initialization object.
init_nlp = NLPInitialization(init_sim_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = InitializationOptimizer(init_nlp)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Create a simulator
simulator = SundialsDAESimulator(init_sim_model, verbosity=3, start_time=0.0, \
final_time=150, time_step=0.01,input=u_traj)
# Run simulation
simulator.run()
# Write data to file
simulator.write_data()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('CSTR_CSTR_Init_Optimization_result.txt')
# Extract variable profiles
c_init_sim=res.get_variable_data('cstr.c')
T_init_sim=res.get_variable_data('cstr.T')
Tc_init_sim=res.get_variable_data('cstr.Tc')
# Plot the results
if with_plots:
plt.figure(1)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.plot(c_init_sim.t,c_init_sim.x)
plt.grid()
plt.ylabel('Concentration')
plt.subplot(312)
plt.plot(T_init_sim.t,T_init_sim.x)
plt.grid()
plt.ylabel('Temperature')
plt.subplot(313)
plt.plot(Tc_init_sim.t,Tc_init_sim.x)
plt.grid()
plt.ylabel('Cooling temperature')
plt.xlabel('time')
plt.show()
# Solve optimal control problem
oc.compile_model(curr_dir+"/files/CSTR.mo", "CSTR.CSTR_Opt", target='ipopt')
cstr = jmi.Model("CSTR_CSTR_Opt")
cstr.set_value('Tc_ref',Tc_0_B)
cstr.set_value('c_ref',c_0_B)
cstr.set_value('T_ref',T_0_B)
cstr.set_value('cstr.c_init',c_0_A)
cstr.set_value('cstr.T_init',T_0_A)
# Initialize the mesh
n_e = 100 # Number of elements
hs = N.ones(n_e)*1./n_e # Equidistant points
n_cp = 3; # Number of collocation points in each element
# Create an NLP object
nlp = ipopt.NLPCollocationLagrangePolynomials(cstr,n_e,hs,n_cp)
# Use the simulated trajectories to initialize the model
nlp.set_initial_from_dymola(res, hs, 0, 0)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter",500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file (CSTR_CSTR_Opt_result.txt) can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('CSTR_CSTR_Opt_result.txt')
# Extract variable profiles
c_res=res.get_variable_data('cstr.c')
T_res=res.get_variable_data('cstr.T')
Tc_res=res.get_variable_data('cstr.Tc')
c_ref=res.get_variable_data('c_ref')
T_ref=res.get_variable_data('T_ref')
Tc_ref=res.get_variable_data('Tc_ref')
cost=res.get_variable_data('cost')
assert N.abs(cost.x[-1]/1.e7 - 1.8585429) < 1e-3, \
"Wrong value of cost function in cstr.py"
# Plot the results
if with_plots:
plt.figure(2)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.plot(c_res.t,c_res.x)
plt.plot(c_ref.t,c_ref.x,'--')
plt.grid()
plt.ylabel('Concentration')
plt.subplot(312)
plt.plot(T_res.t,T_res.x)
plt.plot(T_ref.t,T_ref.x,'--')
plt.grid()
plt.ylabel('Temperature')
plt.subplot(313)
plt.plot(Tc_res.t,Tc_res.x)
plt.plot(Tc_ref.t,Tc_ref.x,'--')
plt.grid()
plt.ylabel('Cooling temperature')
plt.xlabel('time')
plt.show()
# Simulate to verify the optimal solution
# Set up input trajectory
t = Tc_res.t
u = Tc_res.x
u = N.array([u])
u = N.transpose(u)
u_traj = TrajectoryLinearInterpolation(t,u)
# Comile the Modelica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir+"/files/CSTR.mo","CSTR.CSTR",target='ipopt')
# Load the dynamic library and XML data
sim_model=jmi.Model("CSTR_CSTR")
sim_model.set_value('c_init',c_0_A)
sim_model.set_value('T_init',T_0_A)
sim_model.set_value('Tc',u_traj.eval(0.)[0])
# Create DAE initialization object.
init_nlp = NLPInitialization(sim_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = InitializationOptimizer(init_nlp)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
simulator = SundialsDAESimulator(sim_model, verbosity=3, start_time=0.0, \
final_time=150, time_step=0.01,input=u_traj)
# Run simulation
simulator.run()
# Store simulation data to file
simulator.write_data()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('CSTR_CSTR_result.txt')
# Extract variable profiles
c_sim=res.get_variable_data('c')
T_sim=res.get_variable_data('T')
Tc_sim=res.get_variable_data('Tc')
# Plot the results
if with_plots:
plt.figure(3)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.plot(c_res.t,c_res.x,'--')
plt.plot(c_sim.t,c_sim.x)
plt.legend(('optimized','simulated'))
plt.grid()
plt.ylabel('Concentration')
plt.subplot(312)
plt.plot(T_res.t,T_res.x,'--')
plt.plot(T_sim.t,T_sim.x)
plt.legend(('optimized','simulated'))
plt.grid()
plt.ylabel('Temperature')
plt.subplot(313)
plt.plot(Tc_res.t,Tc_res.x,'--')
plt.plot(Tc_sim.t,Tc_sim.x)
plt.legend(('optimized','simulated'))
plt.grid()
plt.ylabel('Cooling temperature')
plt.xlabel('time')
plt.show()
def run_demo(with_plots=True):
"""Demonstrate how to solve a minimum time
dynamic optimization problem based on a
Van der Pol oscillator system."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/VDP.mo",
"VDP_pack.VDP_Opt",
target='ipopt')
# Load the dynamic library and XML data
vdp = jmi.Model("VDP_pack_VDP_Opt")
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = jmi.SimultaneousOptLagPols(vdp, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = jmi.JMISimultaneousOptIPOPT(nlp.jmi_simoptlagpols)
# nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter", 500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Retreive the number of points in each column in the
# result matrix
n_points = nlp.jmi_simoptlagpols.opt_sim_get_result_variable_vector_length(
)
n_points = n_points.value
# Create result data vectors
p_opt = N.zeros(1)
t_ = N.zeros(n_points)
dx_ = N.zeros(3 * n_points)
x_ = N.zeros(3 * n_points)
u_ = N.zeros(n_points)
w_ = N.zeros(n_points)
# Get the result
nlp.jmi_simoptlagpols.opt_sim_get_result(p_opt, t_, dx_, x_, u_, w_)
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(311)
plt.plot(t_, x_[0:n_points])
plt.grid()
plt.ylabel('x1')
plt.subplot(312)
plt.plot(t_, x_[n_points:n_points * 2])
plt.grid()
plt.ylabel('x2')
plt.subplot(313)
plt.plot(t_, u_[0:n_points])
plt.grid()
plt.ylabel('u')
plt.xlabel('time')
plt.show()
import sys
import nose
from jmodelica.tests import testattr
from jmodelica.compiler import OptimicaCompiler
import jmodelica as jm
jm_home = jm.environ['JMODELICA_HOME']
path_to_examples = os.path.join('Python', 'jmodelica', 'examples')
model = os.path.join('files', 'Pendulum_pack.mo')
fpath = os.path.join(jm_home, path_to_examples, model)
cpath = "Pendulum_pack.Pendulum_Opt"
OptimicaCompiler.set_log_level(OptimicaCompiler.LOG_ERROR)
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
@testattr(stddist=True)
def test_optimica_compile():
"""
Test that compilation is possible with optimicacompiler
and that all obligatory files are created.
"""
# detect platform specific shared library file extension
suffix = ''
if sys.platform == 'win32':
suffix = '.dll'
# Stationary point B
CA1_0_B = init_model.get_value('CA1')
CA2_0_B = init_model.get_value('CA2')
T1_0_B = init_model.get_value('T1')
T2_0_B = init_model.get_value('T2')
# Print some data for stationary point B
print(' *** Stationary point B ***')
print('u = [%f,%f]' % (u1_0_B, u2_0_B))
print('CAi = [%f,%f]' % (CA1_0_B, CA2_0_B))
print('Ti = [%f,%f]' % (T1_0_B, T2_0_B))
## Set up and solve an optimal control problem.
# Create an OptimicaCompiler instance
oc = OptimicaCompiler()
# Compil the Model
oc.compile_model(
(curr_dir + "/files/CSTRLib.mo", curr_dir + "/files/CSTR2_Opt.mo"),
"CSTR2_Opt",
target='ipopt')
# Load the dynamic library and XML data
model = jmi.Model("CSTR2_Opt")
# Initialize the model with parameters
# Initialize the model to stationary point A
model.set_value('two_CSTRs_Series.CA1_0', CA1_0_A)
model.set_value('two_CSTRs_Series.CA2_0', CA2_0_A)
def run_demo(with_plots=True):
"""Optimal control of the quadruple tank process."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/QuadTank.mo",
"QuadTank_pack.QuadTank_Opt",
target='ipopt')
# Load the dynamic library and XML data
qt = jmi.Model("QuadTank_pack_QuadTank_Opt")
# Define inputs for operating point A
u_A = N.array([2., 2])
# Define inputs for operating point B
u_B = N.array([2.5, 2.5])
x_0 = N.ones(4) * 0.01
def res(y, t):
for i in range(4):
qt.get_x()[i] = y[i]
qt.jmimodel.ode_f()
return qt.get_dx()[0:4]
# Compute stationary state values for operating point A
qt.set_u(u_A)
#qt.getPI()[21] = u_A[0]
#qt.getPI()[22] = u_A[1]
t_sim = N.linspace(0., 2000., 500)
y_sim = int.odeint(res, x_0, t_sim)
x_A = y_sim[-1, :]
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(t_sim, y_sim[:, 0:4])
plt.grid()
# Compute stationary state values for operating point A
qt.set_u(u_B)
t_sim = N.linspace(0., 2000., 500)
y_sim = int.odeint(res, x_0, t_sim)
x_B = y_sim[-1, :]
if with_plots:
# Plot
plt.figure(1)
plt.subplot(212)
plt.plot(t_sim, y_sim[:, 0:4])
plt.grid()
plt.show()
qt.get_pi()[13] = x_A[0]
qt.get_pi()[14] = x_A[1]
qt.get_pi()[15] = x_A[2]
qt.get_pi()[16] = x_A[3]
qt.get_pi()[17] = x_B[0]
qt.get_pi()[18] = x_B[1]
qt.get_pi()[19] = x_B[2]
qt.get_pi()[20] = x_B[3]
qt.get_pi()[21] = u_B[0]
qt.get_pi()[22] = u_B[1]
# Solve optimal control problem
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = jmi.SimultaneousOptLagPols(qt, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = jmi.JMISimultaneousOptIPOPT(nlp.jmi_simoptlagpols)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter", 500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Retreive the number of points in each column in the
# result matrix
n_points = nlp.jmi_simoptlagpols.opt_sim_get_result_variable_vector_length(
)
n_points = n_points.value
# Create result data vectors
p_opt = N.zeros(1)
t_ = N.zeros(n_points)
dx_ = N.zeros(5 * n_points)
x_ = N.zeros(5 * n_points)
u_ = N.zeros(2 * n_points)
w_ = N.zeros(n_points)
# Get the result
nlp.jmi_simoptlagpols.opt_sim_get_result(p_opt, t_, dx_, x_, u_, w_)
if with_plots:
# Plot
plt.figure(2)
plt.clf()
plt.subplot(411)
plt.plot(t_, x_[0:n_points])
plt.grid()
plt.ylabel('x1')
plt.subplot(412)
plt.plot(t_, x_[n_points:n_points * 2])
plt.grid()
plt.ylabel('x2')
plt.subplot(413)
plt.plot(t_, x_[n_points * 2:n_points * 3])
plt.grid()
plt.ylabel('x3')
plt.subplot(414)
plt.plot(t_, x_[n_points * 3:n_points * 4])
plt.grid()
plt.ylabel('x4')
plt.show()
plt.figure(3)
plt.clf()
plt.subplot(211)
plt.plot(t_, u_[0:n_points])
plt.grid()
plt.ylabel('u1')
plt.subplot(212)
plt.plot(t_, u_[n_points:n_points * 2])
plt.grid()
plt.ylabel('u2')
if __name__ == "__main__":
run_demo()
def run_demo(with_plots=True):
"""This example is based on a system composed of two
Continously Stirred Tank Reactors (CSTRs) in series.
The example demonstrates the following steps:
1. How to solve a DAE initialization problem. The initialization
model have equations specifying that all derivatives
should be identically zero, which implies that a
stationary solution is obtained. Two stationary points,
corresponding to different inputs, are computed. We call
the stationary points A and B respectively. For more information
about the DAE initialization algorithm, see
http://www.jmodelica.org/page/10.
2. An optimal control problem is solved where the objective
Is to transfer the state of the system from stationary
point A to point B. Here, it is also demonstrated how
to set parameter values in a model. More information
about the simultaneous optimization algorithm can be
found at http://www.jmodelica.org/page/10.
3. The optimization result is saved to file and then
the important variables are plotted."""
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Create a Modelica compiler instance
mc = ModelicaCompiler()
# Compile the stationary initialization model into a DLL
mc.compile_model(curr_dir + "/files/CSTRLib.mo",
"CSTRLib.Components.Two_CSTRs_stat_init",
target='ipopt')
# Load a model instance into Python
init_model = jmi.Model("CSTRLib_Components_Two_CSTRs_stat_init")
# Create DAE initialization object.
init_nlp = NLPInitialization(init_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = InitializationOptimizer(init_nlp)
# Set inputs for Stationary point A
u1_0_A = 1
u2_0_A = 1
init_model.set_value('u1', u1_0_A)
init_model.set_value('u2', u2_0_A)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
#init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
CA1_0_A = init_model.get_value('CA1')
CA2_0_A = init_model.get_value('CA2')
T1_0_A = init_model.get_value('T1')
T2_0_A = init_model.get_value('T2')
# Print some data for stationary point A
print(' *** Stationary point A ***')
print('u = [%f,%f]' % (u1_0_A, u2_0_A))
print('CAi = [%f,%f]' % (CA1_0_A, CA2_0_A))
print('Ti = [%f,%f]' % (T1_0_A, T2_0_A))
# Set inputs for stationary point B
u1_0_B = 1.1
u2_0_B = 0.9
init_model.set_value('u1', u1_0_B)
init_model.set_value('u2', u2_0_B)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
#init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Stationary point B
CA1_0_B = init_model.get_value('CA1')
CA2_0_B = init_model.get_value('CA2')
T1_0_B = init_model.get_value('T1')
T2_0_B = init_model.get_value('T2')
# Print some data for stationary point B
print(' *** Stationary point B ***')
print('u = [%f,%f]' % (u1_0_B, u2_0_B))
print('CAi = [%f,%f]' % (CA1_0_B, CA2_0_B))
print('Ti = [%f,%f]' % (T1_0_B, T2_0_B))
## Set up and solve an optimal control problem.
# Create an OptimicaCompiler instance
oc = OptimicaCompiler()
# Compil the Model
oc.compile_model(
(curr_dir + "/files/CSTRLib.mo", curr_dir + "/files/CSTR2_Opt.mo"),
"CSTR2_Opt",
target='ipopt')
# Load the dynamic library and XML data
model = jmi.Model("CSTR2_Opt")
# Initialize the model with parameters
# Initialize the model to stationary point A
model.set_value('two_CSTRs_Series.CA1_0', CA1_0_A)
model.set_value('two_CSTRs_Series.CA2_0', CA2_0_A)
model.set_value('two_CSTRs_Series.T1_0', T1_0_A)
model.set_value('two_CSTRs_Series.T2_0', T2_0_A)
# Set the target values to stationary point B
model.set_value('u1_ref', u1_0_B)
model.set_value('u2_ref', u2_0_B)
model.set_value('CA1_ref', CA1_0_B)
model.set_value('CA2_ref', CA2_0_B)
# Initialize the optimization mesh
n_e = 30 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object representing the discretized problem
nlp = ipopt.NLPCollocationLagrangePolynomials(model, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
# The convergence is slow, for some reason, increasing tolerance.
nlp_ipopt.opt_sim_ipopt_set_num_option("tol", 0.0001)
#Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file (CSTR2_Opt_result.txt) can be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote
res = jmodelica.io.ResultDymolaTextual('CSTR2_Opt_result.txt')
# Extract variable profiles
CA1_res = res.get_variable_data('two_CSTRs_Series.CA1')
CA2_res = res.get_variable_data('two_CSTRs_Series.CA2')
T1_res = res.get_variable_data('two_CSTRs_Series.T1')
T2_res = res.get_variable_data('two_CSTRs_Series.T2')
u1_res = res.get_variable_data('two_CSTRs_Series.u1')
u2_res = res.get_variable_data('two_CSTRs_Series.u2')
CA1_ref_res = res.get_variable_data('CA1_ref')
CA2_ref_res = res.get_variable_data('CA2_ref')
u1_ref_res = res.get_variable_data('u1_ref')
u2_ref_res = res.get_variable_data('u2_ref')
# Plot the results
if with_plots:
plt.figure(1)
plt.clf()
plt.hold(True)
plt.subplot(211)
plt.plot(CA1_res.t, CA1_res.x)
plt.plot(CA1_ref_res.t, CA1_ref_res.x, '--')
plt.ylabel('Concentration reactor 1 [J/l]')
plt.grid()
plt.subplot(212)
plt.plot(CA2_res.t, CA2_res.x)
plt.plot(CA2_ref_res.t, CA2_ref_res.x, '--')
plt.ylabel('Concentration reactor 2 [J/l]')
plt.xlabel('t [s]')
plt.grid()
plt.show()
plt.figure(2)
plt.clf()
plt.hold(True)
plt.subplot(211)
plt.plot(T1_res.t, T1_res.x)
plt.ylabel('Temperature reactor 1 [K]')
plt.grid()
plt.subplot(212)
plt.plot(T2_res.t, T2_res.x)
plt.ylabel('Temperature reactor 2 [K]')
plt.grid()
plt.xlabel('t [s]')
plt.show()
plt.figure(3)
plt.clf()
plt.hold(True)
plt.subplot(211)
plt.plot(u1_res.t, u1_res.x)
plt.ylabel('Input 1')
plt.plot(u1_ref_res.t, u1_ref_res.x, '--')
plt.grid()
plt.subplot(212)
plt.plot(u2_res.t, u2_res.x)
plt.ylabel('Input 2')
plt.plot(u2_ref_res.t, u2_ref_res.x, '--')
plt.xlabel('t [s]')
plt.grid()
plt.show()
def run_demo(with_plots=True):
"""Demonstrate how to solve a simple
parameter estimation problem."""
oc = OptimicaCompiler()
# oc.set_boolean_option('state_start_values_fixed',True)
curr_dir = os.path.dirname(os.path.abspath(__file__));
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir+"/files/ParameterEstimation_1.mo",
"ParEst.ParEst",
target='ipopt')
# Load the dynamic library and XML data
model=jmi.Model("ParEst_ParEst")
# Retreive parameter and variable vectors
pi = model.get_pi();
x = model.get_x();
dx = model.get_dx();
u = model.get_u();
w = model.get_w();
# Set model input
w[0] = 1
# ODE right hand side
# This can be done since DAE residuals 1 and 2
# are written on simple "ODE" form: f(x,u)-\dot x = 0
def F(xx,t):
dx[0] = 0. # Set derivatives to zero
dx[1] = 0.
x[0] = xx[0] # Set states
x[1] = xx[1]
res = N.zeros(3); # Create residual vector
model.jmimodel.dae_F(res) # Evaluate DAE residual
return N.array([res[1],res[2]])
# Simulate model to get measurement data
N_points = 100 # Number of points in simulation
t0 = 0
tf = 15
t_sim = N.linspace(t0,tf,num=N_points)
xx0=N.array([0.,0.])
xx = integr.odeint(F,xx0,t_sim)
# Extract measurements
N_points_meas = 11
t_meas = N.linspace(t0,10,num=N_points_meas)
xx_meas = integr.odeint(F,xx0,t_meas)
# Add measurement noice
xx_meas[:,0] = xx_meas[:,0] + N.random.random(N_points_meas)*0.2-0.1
# Set parameters corresponding to measurement data in model
pi[4:15] = t_meas
pi[15:26] = xx_meas[:,0]
if with_plots:
# Plot simulation
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(t_sim,xx[:,0])
plt.grid()
plt.plot(t_meas,xx_meas[:,0],'x')
plt.ylabel('x1')
plt.subplot(212)
plt.plot(t_sim,xx[:,1])
plt.grid()
plt.ylabel('x2')
plt.show()
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e)*1./n_e # Equidistant points
n_cp = 3; # Number of collocation points in each element
# Create an NLP object
nlp = ipopt.NLPCollocationLagrangePolynomials(model,n_e,hs,n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter",500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('ParEst_ParEst_result.txt')
# Extract variable profiles
x1 = res.get_variable_data('sys.x1')
u = res.get_variable_data('u')
if with_plots:
# Plot optimization result
plt.figure(2)
plt.clf()
plt.subplot(211)
plt.plot(x1.t,x1.x)
plt.plot(t_meas,xx_meas[:,0],'x')
plt.grid()
plt.ylabel('y')
plt.subplot(212)
plt.plot(u.t,u.x)
plt.grid()
plt.ylabel('u')
plt.show()
print("** Optimal parameter values: **")
print("w = %f"%pi[0])
print("z = %f"%pi[1])
def run_demo(with_plots=True):
"""Demonstrate how to solve a simple
parameter estimation problem."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/ParameterEstimation_1.mo",
"ParEst.ParEst",
target='ipopt')
# Load the dynamic library and XML data
model = jmi.Model("ParEst_ParEst")
# Retreive parameter and variable vectors
pi = model.get_pi()
x = model.get_x()
dx = model.get_dx()
u = model.get_u()
w = model.get_w()
# Set model input
w[0] = 1
# ODE right hand side
# This can be done since DAE residuals 1 and 2
# are written on simple "ODE" form: f(x,u)-\dot x = 0
def F(xx, t):
dx[0] = 0. # Set derivatives to zero
dx[1] = 0.
x[0] = xx[0] # Set states
x[1] = xx[1]
res = N.zeros(5)
# Create residual vector
model.jmimodel.dae_F(res) # Evaluate DAE residual
return N.array([res[1], res[2]])
# Simulate model to get measurement data
N_points = 100 # Number of points in simulation
t0 = 0
tf = 15
t_sim = N.linspace(t0, tf, num=N_points)
xx0 = N.array([0., 0.])
xx = integr.odeint(F, xx0, t_sim)
# Extract measurements
N_points_meas = 11
t_meas = N.linspace(t0, 10, num=N_points_meas)
xx_meas = integr.odeint(F, xx0, t_meas)
# Add measurement noice
xx_meas[:, 0] = xx_meas[:, 0] + N.random.random(N_points_meas) * 0.2 - 0.1
# Set parameters corresponding to measurement data in model
pi[4:15] = t_meas
pi[15:26] = xx_meas[:, 0]
if with_plots:
# Plot simulation
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(t_sim, xx[:, 0])
plt.grid()
plt.plot(t_meas, xx_meas[:, 0], 'x')
plt.ylabel('x1')
plt.subplot(212)
plt.plot(t_sim, xx[:, 1])
plt.grid()
plt.ylabel('x2')
plt.show()
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = jmi.SimultaneousOptLagPols(model, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = jmi.JMISimultaneousOptIPOPT(nlp.jmi_simoptlagpols)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter", 500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Retreive the number of points in each column in the
# result matrix
n_points = nlp.jmi_simoptlagpols.opt_sim_get_result_variable_vector_length(
)
n_points = n_points.value
# Create optimization result data vectors
p_opt = N.zeros(2)
t_ = N.zeros(n_points)
dx_ = N.zeros(2 * n_points)
x_ = N.zeros(2 * n_points)
u_ = N.zeros(n_points)
w_ = N.zeros(4 * n_points)
# Get the result
nlp.jmi_simoptlagpols.opt_sim_get_result(p_opt, t_, dx_, x_, u_, w_)
if with_plots:
# Plot optimization result
plt.figure(2)
plt.clf()
plt.subplot(211)
plt.plot(t_, w_[n_points:2 * n_points])
plt.plot(t_meas, xx_meas[:, 0], 'x')
plt.grid()
plt.ylabel('y')
plt.subplot(212)
plt.plot(t_, w_[0:n_points])
plt.grid()
plt.ylabel('u')
plt.show()
print("** Optimal parameter values: **")
print("w = %f" % pi[0])
print("z = %f" % pi[1])
def run_demo(with_plots=True):
"""This example is based on the Hicks-Ray
Continuously Stirred Tank Reactors (CSTR) system. The system
has two states, the concentration and the temperature. The
control input to the system is the temperature of the cooling
flow in the reactor jacket. The chemical reaction in the reactor
is exothermic, and also temperature dependent; high temperature
results in high reaction rate.
The example demonstrates the following steps:
1. How to solve a DAE initialization problem. The initialization
model have equations specifying that all derivatives
should be identically zero, which implies that a
stationary solution is obtained. Two stationary points,
corresponding to different inputs, are computed. We call
the stationary points A and B respectively. point A corresponds
to operating conditions where the reactor is cold and
the reaction rate is low, whereas point B corresponds to
a higher temperature where the reaction rate is high.
For more information about the DAE initialization algorithm, see
http://www.jmodelica.org/page/10.
2. An optimal control problem is solved where the objective Is to
transfer the state of the system from stationary point A to point
B. The challenge is to ignite the reactor while avoiding
uncontrolled temperature increase. It is also demonstrated how to
set parameter and variable values in a model.
More information about the simultaneous optimization algorithm
can be found at http://www.jmodelica.org/page/10.
3. The optimization result is saved to file and then
the important variables are plotted.
"""
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Create a Modelica compiler instance
oc = OptimicaCompiler()
# Compile the stationary initialization model into a DLL
oc.compile_model(curr_dir + "/files/CSTR.mo",
"CSTR.CSTR_Init",
target='ipopt')
# Load a model instance into Python
init_model = jmi.Model("CSTR_CSTR_Init")
# Create DAE initialization object.
init_nlp = jmi.DAEInitializationOpt(init_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = jmi.JMIDAEInitializationOptIPOPT(init_nlp)
# Set inputs for Stationary point A
Tc_0_A = 250
init_model.set_value('Tc', Tc_0_A)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
# init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
c_0_A = init_model.get_value('c')
T_0_A = init_model.get_value('T')
# Print some data for stationary point A
print(' *** Stationary point A ***')
print('Tc = %f' % Tc_0_A)
print('c = %f' % c_0_A)
print('T = %f' % T_0_A)
# Set inputs for Stationary point B
Tc_0_B = 280
init_model.set_value('Tc', Tc_0_B)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
c_0_B = init_model.get_value('c')
T_0_B = init_model.get_value('T')
# Print some data for stationary point B
print(' *** Stationary point B ***')
print('Tc = %f' % Tc_0_B)
print('c = %f' % c_0_B)
print('T = %f' % T_0_B)
oc.compile_model(curr_dir + "/files/CSTR.mo",
"CSTR.CSTR_Opt",
target='ipopt')
cstr = jmi.Model("CSTR_CSTR_Opt")
cstr.set_value('Tc_ref', Tc_0_B)
cstr.set_value('c_ref', c_0_B)
cstr.set_value('T_ref', T_0_B)
cstr.set_value('cstr.c_init', c_0_A)
cstr.set_value('cstr.T_init', T_0_A)
# Initialize the mesh
n_e = 150 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = jmi.SimultaneousOptLagPols(cstr, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = jmi.JMISimultaneousOptIPOPT(nlp.jmi_simoptlagpols)
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter", 500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file (CSTR_CSTR_Opt_result.txt) can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual('CSTR_CSTR_Opt_result.txt')
# Extract variable profiles
c_res = res.get_variable_data('cstr.c')
T_res = res.get_variable_data('cstr.T')
Tc_res = res.get_variable_data('cstr.Tc')
c_ref = res.get_variable_data('c_ref')
T_ref = res.get_variable_data('T_ref')
Tc_ref = res.get_variable_data('Tc_ref')
# Plot the results
if with_plots:
plt.figure(1)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.plot(c_res.t, c_res.x)
plt.plot(c_ref.t, c_ref.x, '--')
plt.grid()
plt.ylabel('Concentration')
plt.subplot(312)
plt.plot(T_res.t, T_res.x)
plt.plot(T_ref.t, T_ref.x, '--')
plt.grid()
plt.ylabel('Temperature')
plt.subplot(313)
plt.plot(Tc_res.t, Tc_res.x)
plt.plot(Tc_ref.t, Tc_ref.x, '--')
plt.grid()
plt.ylabel('Cooling temperature')
plt.xlabel('time')
plt.show()
def run_demo(with_plots=True):
"""Optimal control of the quadruple tank process."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Compile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/QuadTank.mo",
"QuadTank_pack.QuadTank_Opt",
target='ipopt')
# Load the dynamic library and XML data
qt = jmi.Model("QuadTank_pack_QuadTank_Opt")
# Define inputs for operating point A
u_A = N.array([2., 2])
# Define inputs for operating point B
u_B = N.array([2.5, 2.5])
x_0 = N.ones(4) * 0.01
def res(y, t):
for i in range(4):
qt.get_x()[i] = y[i]
qt.jmimodel.ode_f()
return qt.get_dx()[0:4]
# Compute stationary state values for operating point A
qt.set_u(u_A)
#qt.getPI()[21] = u_A[0]
#qt.getPI()[22] = u_A[1]
t_sim = N.linspace(0., 2000., 500)
y_sim = int.odeint(res, x_0, t_sim)
x_A = y_sim[-1, :]
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(t_sim, y_sim[:, 0:4])
plt.grid()
# Compute stationary state values for operating point A
qt.set_u(u_B)
t_sim = N.linspace(0., 2000., 500)
y_sim = int.odeint(res, x_0, t_sim)
x_B = y_sim[-1, :]
if with_plots:
# Plot
plt.figure(1)
plt.subplot(212)
plt.plot(t_sim, y_sim[:, 0:4])
plt.grid()
plt.show()
qt.get_pi()[13] = x_A[0]
qt.get_pi()[14] = x_A[1]
qt.get_pi()[15] = x_A[2]
qt.get_pi()[16] = x_A[3]
qt.get_pi()[17] = x_B[0]
qt.get_pi()[18] = x_B[1]
qt.get_pi()[19] = x_B[2]
qt.get_pi()[20] = x_B[3]
qt.get_pi()[21] = u_B[0]
qt.get_pi()[22] = u_B[1]
# Solve optimal control problem
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = ipopt.NLPCollocationLagrangePolynomials(qt, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
nlp_ipopt.opt_sim_ipopt_set_int_option("max_iter", 500)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual(
'QuadTank_pack_QuadTank_Opt_result.txt')
# Extract variable profiles
x1 = res.get_variable_data('x1')
x2 = res.get_variable_data('x2')
x3 = res.get_variable_data('x3')
x4 = res.get_variable_data('x4')
u1 = res.get_variable_data('u1')
u2 = res.get_variable_data('u2')
cost = res.get_variable_data('cost')
assert N.abs(cost.x[-1] - 5.0333257e+02) < 1e-3, \
"Wrong value of cost function in quadtank.py"
if with_plots:
# Plot
plt.figure(2)
plt.clf()
plt.subplot(411)
plt.plot(x1.t, x1.x)
plt.grid()
plt.ylabel('x1')
plt.subplot(412)
plt.plot(x2.t, x2.x)
plt.grid()
plt.ylabel('x2')
plt.subplot(413)
plt.plot(x3.t, x3.x)
plt.grid()
plt.ylabel('x3')
plt.subplot(414)
plt.plot(x4.t, x4.x)
plt.grid()
plt.ylabel('x4')
plt.show()
plt.figure(3)
plt.clf()
plt.subplot(211)
plt.plot(u1.t, u1.x)
plt.grid()
plt.ylabel('u1')
plt.subplot(212)
plt.plot(u2.t, u2.x)
plt.grid()
plt.ylabel('u2')
if __name__ == "__main__":
run_demo()
from jmodelica.compiler import OptimicaCompiler
from jmodelica.tests import testattr
from jmodelica import jmi
from jmodelica.optimization.sundials import construct_grid
from jmodelica.optimization.sundials import MultipleShooter
from jmodelica.optimization.sundials import construct_grid
from jmodelica.optimization.sundials import _check_normgrid_consistency
from jmodelica.optimization.sundials import _split_opt_x
from jmodelica.optimization.sundials import plot_control_solutions
from jmodelica.optimization.sundials import single_shooting
jm_home = os.environ.get('JMODELICA_HOME')
path_to_examples = os.path.join(jm_home, "Python", "jmodelica", "examples")
path_to_tests = os.path.join(jm_home, "Python", "jmodelica", "tests")
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
sep = os.path.sep
def _lazy_init_shooter(model, gridsize, single_initial_u=2.5):
""" A helper function used by TestMultipleShooterLazy and
TestShootingHardcore.
"""
# needed to be able get a reasonable initial
model.u = [single_initial_u] * len(model.u)
initial_u = [[single_initial_u] * len(model.u)] * gridsize
grid = construct_grid(gridsize)
shooter = MultipleShooter(model, initial_u, grid)
#shooter.set_log_level(3)
def run_demo(with_plots=True):
"""Demonstrate how to solve a dynamic optimization
problem based on an inverted pendulum system."""
oc = OptimicaCompiler()
oc.set_boolean_option('state_start_values_fixed', True)
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Comile the Optimica model first to C code and
# then to a dynamic library
oc.compile_model(curr_dir + "/files/Pendulum_pack.mo",
"Pendulum_pack.Pendulum_Opt",
target='ipopt')
# Load the dynamic library and XML data
pend = jmi.Model("Pendulum_pack_Pendulum_Opt")
# Initialize the mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object
nlp = ipopt.NLPCollocationLagrangePolynomials(pend, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
# Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file can also be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote to file
res = jmodelica.io.ResultDymolaTextual(
'Pendulum_pack_Pendulum_Opt_result.txt')
# Extract variable profiles
theta = res.get_variable_data('pend.theta')
dtheta = res.get_variable_data('pend.dtheta')
x = res.get_variable_data('pend.x')
dx = res.get_variable_data('pend.dx')
u = res.get_variable_data('u')
cost = res.get_variable_data('cost')
assert N.abs(cost.x[-1] - 1.2921683e-01) < 1e-3, \
"Wrong value of cost function in pendulum.py"
if with_plots:
# Plot
plt.figure(1)
plt.clf()
plt.subplot(211)
plt.plot(theta.t, theta.x)
plt.grid()
plt.ylabel('th')
plt.subplot(212)
plt.plot(theta.t, theta.x)
plt.grid()
plt.ylabel('dth')
plt.xlabel('time')
plt.show()
plt.figure(2)
plt.clf()
plt.subplot(311)
plt.plot(x.t, x.x)
plt.grid()
plt.ylabel('x')
plt.subplot(312)
plt.plot(dx.t, dx.x)
plt.grid()
plt.ylabel('dx')
plt.xlabel('time')
plt.subplot(313)
plt.plot(u.t, u.x)
plt.grid()
plt.ylabel('u')
plt.xlabel('time')
plt.show()
def run_demo(with_plots=True):
""" Load change of a distillation column. The distillation column model
is documented in the paper:
@Article{hahn+02,
title={An improved method for nonlinear model reduction using balancing of empirical gramians},
author={Hahn, J. and Edgar, T.F.},
journal={Computers and Chemical Engineering},
volume={26},
number={10},
pages={1379-1397},
year={2002}
}
"""
curr_dir = os.path.dirname(os.path.abspath(__file__))
# Create a Modelica compiler instance
mc = ModelicaCompiler()
# Compile the stationary initialization model into a DLL
mc.compile_model(curr_dir + "/files/DISTLib.mo",
"DISTLib.Binary_Dist_initial",
target='ipopt')
# Load a model instance into Python
init_model = jmi.Model("DISTLib_Binary_Dist_initial")
# Create DAE initialization object.
init_nlp = NLPInitialization(init_model)
# Create an Ipopt solver object for the DAE initialization system
init_nlp_ipopt = InitializationOptimizer(init_nlp)
# Set inputs for Stationary point A
u1_0_A = 3.0
init_model.set_value('u1', u1_0_A)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
#init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point A
y_A = N.zeros(32)
x_A = N.zeros(32)
# print(' *** Stationary point A ***')
print '(Tray index, x_i_A, y_i_A)'
for i in range(N.size(y_A)):
y_A[i] = init_model.get_value('y' + str(i + 1))
x_A[i] = init_model.get_value('x' + str(i + 1))
print '(' + str(i + 1) + ', %f, %f)' % (x_A[i], y_A[i])
# Set inputs for stationary point B
u1_0_B = 3.0 - 1
init_model.set_value('u1', u1_0_B)
# init_nlp_ipopt.init_opt_ipopt_set_string_option("derivative_test","first-order")
#init_nlp_ipopt.init_opt_ipopt_set_int_option("max_iter",5)
# Solve the DAE initialization system with Ipopt
init_nlp_ipopt.init_opt_ipopt_solve()
# Store stationary point B
y_B = N.zeros(32)
x_B = N.zeros(32)
# print(' *** Stationary point B ***')
print '(Tray index, x_i_B, y_i_B)'
for i in range(N.size(y_B)):
y_B[i] = init_model.get_value('y' + str(i + 1))
x_B[i] = init_model.get_value('x' + str(i + 1))
print '(' + str(i + 1) + ', %f, %f)' % (x_B[i], y_B[i])
# ## Set up and solve an optimal control problem.
# Create an OptimicaCompiler instance
oc = OptimicaCompiler()
# Generate initial equations for states even if fixed=false
oc.set_boolean_option('state_start_values_fixed', True)
# Compil the Model
oc.compile_model(
(curr_dir + "/files/DISTLib.mo", curr_dir + "/files/DISTLib_Opt.mo"),
"DISTLib_Opt.Binary_Dist_Opt1",
target='ipopt')
# Load the dynamic library and XML data
model = jmi.Model("DISTLib_Opt_Binary_Dist_Opt1")
# Initialize the model with parameters
# Initialize the model to stationary point A
for i in range(N.size(x_A)):
model.set_value('x' + str(i + 1) + '_0', x_A[i])
# Set the target values to stationary point B
model.set_value('u1_ref', u1_0_B)
model.set_value('y1_ref', y_B[0])
# Initialize the optimization mesh
n_e = 50 # Number of elements
hs = N.ones(n_e) * 1. / n_e # Equidistant points
n_cp = 3
# Number of collocation points in each element
# Create an NLP object representing the discretized problem
nlp = ipopt.NLPCollocationLagrangePolynomials(model, n_e, hs, n_cp)
# Create an Ipopt NLP object
nlp_ipopt = ipopt.CollocationOptimizer(nlp)
#nlp_ipopt.opt_sim_ipopt_set_string_option("derivative_test","first-order")
# If the convergence is slow, may increase tolerance.
#nlp_ipopt.opt_sim_ipopt_set_num_option("tol",0.0001)
#Solve the optimization problem
nlp_ipopt.opt_sim_ipopt_solve()
# Write to file. The resulting file can be
# loaded into Dymola.
nlp.export_result_dymola()
# Load the file we just wrote
res = jmodelica.io.ResultDymolaTextual(
'DISTLib_Opt_Binary_Dist_Opt1_result.txt')
# Extract variable profiles
u1_res = res.get_variable_data('u1')
u1_ref_res = res.get_variable_data('u1_ref')
y1_ref_res = res.get_variable_data('y1_ref')
x_res = []
x_ref_res = []
for i in range(N.size(x_B)):
x_res.append(res.get_variable_data('x' + str(i + 1)))
y_res = []
for i in range(N.size(x_B)):
y_res.append(res.get_variable_data('y' + str(i + 1)))
# Plot the results
if with_plots:
plt.figure(1)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.title('Liquid composition')
plt.plot(x_res[0].t, x_res[0].x)
plt.ylabel('x1')
plt.grid()
plt.subplot(312)
plt.plot(x_res[16].t, x_res[16].x)
plt.ylabel('x17')
plt.grid()
plt.subplot(313)
plt.plot(x_res[31].t, x_res[31].x)
plt.ylabel('x32')
plt.grid()
plt.xlabel('t [s]')
plt.show()
# Plot the results
plt.figure(2)
plt.clf()
plt.hold(True)
plt.subplot(311)
plt.title('Vapor composition')
plt.plot(y_res[0].t, y_res[0].x)
plt.plot(y1_ref_res.t, y1_ref_res.x, '--')
plt.ylabel('y1')
plt.grid()
plt.subplot(312)
plt.plot(y_res[16].t, y_res[16].x)
plt.ylabel('y17')
plt.grid()
plt.subplot(313)
plt.plot(y_res[31].t, y_res[31].x)
plt.ylabel('y32')
plt.grid()
plt.xlabel('t [s]')
plt.show()
plt.figure(3)
plt.clf()
plt.hold(True)
plt.plot(u1_res.t, u1_res.x)
plt.ylabel('u')
plt.plot(u1_ref_res.t, u1_ref_res.x, '--')
plt.xlabel('t [s]')
plt.title('Reflux ratio')
plt.grid()
plt.show()
import jmodelica.xmlparser as xp
import jmodelica.io
from jmodelica.initialization.ipopt import NLPInitialization
from jmodelica.initialization.ipopt import InitializationOptimizer
from jmodelica.optimization import ipopt
from jmodelica.simulation.sundials import SundialsODESimulator
int = N.int32
N.int = N.int32
# set paths
jm_home = os.environ.get('JMODELICA_HOME')
path_to_examples = os.path.join(jm_home, "Python", "jmodelica", "examples")
path_to_tests = os.path.join(jm_home, "Python", "jmodelica", "tests")
# get a compiler
oc = OptimicaCompiler()
# compile VDP
model_vdp = os.path.join("files", "VDP.mo")
fpath_vdp = os.path.join(path_to_examples, model_vdp)
cpath_vdp = "VDP_pack.VDP_Opt"
fname_vdp = cpath_vdp.replace('.', '_', 1)
oc.set_boolean_option('state_start_values_fixed', True)
oc.compile_model(fpath_vdp, cpath_vdp, target='ipopt')
# constants used in TestJMIModel
eval_alg = jmi.JMI_DER_CPPAD
sparsity = jmi.JMI_DER_SPARSE
indep_vars = jmi.JMI_DER_ALL
# compile CSTR with alias variables elimination
def setup():
"""
Setup test module. Compile test model (only needs to be done once) and
set log level.
"""
OptimicaCompiler.set_log_level(OptimicaCompiler.LOG_ERROR)