def run():
quit_ = False
def do_quit(*args, **kwargs):
nonlocal quit_
quit_ = 'quit from SIGINT'
def on_stop(event, message):
nonlocal quit_
quit_ = 'quit from stop duration'
if len(sys.argv) != 2:
print("usage: python3 capture_jls.py [filename]")
return 1
filename = sys.argv[1]
signal.signal(signal.SIGINT, do_quit)
device = scan_require_one(config='auto')
with device:
recorder = DataRecorder(filename, calibration=device.calibration)
try:
device.stream_process_register(recorder)
data = device.start(stop_fn=on_stop)
print('Capturing data: type CTRL-C to stop')
while not quit_:
time.sleep(0.01)
finally:
recorder.close()
return 0
def run():
_quit = False
def on_stop(*args, **kwargs):
nonlocal _quit
_quit = True
args = get_parser().parse_args()
device = scan_require_one(config='auto')
device.parameter_set('buffer_duration', 2) # could be smaller
stream_process = StreamProcess(args.duration, device.sampling_frequency)
signal.signal(signal.SIGINT, on_stop)
# Perform the data capture
with device:
device.stream_process_register(stream_process)
device.start(stop_fn=on_stop, duration=args.duration)
while not _quit:
time.sleep(0.1)
device.stop() # for CTRL-C handling (safe for duplicate calls)
data = stream_process.data
print_stats(data, device.sampling_frequency)
if args.plot:
plot_iv(data, device.sampling_frequency)
return 0
def run():
_quit = False
args = get_parser().parse_args()
def on_stop(*args, **kwargs):
nonlocal _quit
_quit = True
def on_statistics(statistics):
nonlocal _quit
v_data = statistics['signals']['voltage']['ยต']
v = v_data['value']
u = v_data['units']
now = str(datetime.datetime.now())
print(f'{now} : {v:.3f} {u}')
if v < args.threshold:
print(f'{now} : input voltage below threshold')
_quit = True
device = scan_require_one(config='auto')
device.parameter_set('buffer_duration', 2) # could be smaller
signal.signal(signal.SIGINT, on_stop)
# Perform the data capture
with device:
device.statistics_callback = on_statistics
device.start(stop_fn=on_stop)
while not _quit:
time.sleep(0.1)
device.stop() # for CTRL-C handling (safe for duplicate calls)
return 0
def run():
_quit = False
def on_stop(*args, **kwargs):
nonlocal _quit
_quit = True
args = get_parser().parse_args()
device = scan_require_one(config='auto')
signal.signal(signal.SIGINT, on_stop)
window_detect = WindowDetect(args.out)
gpo = 0
gpo_count = 0
# Perform the data capture
with device:
device.parameter_set('current_lsb', 'gpi0')
device.parameter_set('io_voltage', f'{args.io_voltage:.1f}V')
device.parameter_set('gpo0', gpo)
device.parameter_set('gpo1', '1')
device.start(stop_fn=on_stop)
print('Detecting triggers. Press CTRL-C to exit.')
print(CSV_HEADER)
while not _quit:
time.sleep(0.1)
gpo_count += 1
if gpo_count >= 10:
gpo = 0 if gpo else 1
device.parameter_set('gpo0', gpo)
gpo_count = 0
window_detect(device.stream_buffer)
device.stop() # for CTRL-C handling (safe for duplicate calls)
window_detect.close()
return 0
def run():
device = scan_require_one(config='auto')
with device:
data = device.read(contiguous_duration=0.001)
current, voltage = data[-1, :]
print(f'{current} A, {voltage} V')
return 0
def run():
device = scan_require_one(config='auto')
with device:
# turn filter off just to demonstrate
device.parameter_set('current_ranging_type', 'off')
# configure an aggressive filter using single field (recommended way).
device.parameter_set('current_ranging', 'mean_1_3_1')
print('read 1: ' + device.parameter_get('current_ranging'))
device.read(contiguous_duration=0.5)
# configure a very conservative filter using individual fields
device.parameter_set('current_ranging_type', 'mean')
device.parameter_set('current_ranging_samples_pre', 4)
device.parameter_set('current_ranging_samples_window', 8)
device.parameter_set('current_ranging_samples_post', 4)
print('read 2: ' + device.parameter_get('current_ranging'))
device.read(contiguous_duration=0.5)
# insert a single NaN on each current range change.
device.parameter_set('current_ranging', 'nan_0_1_0')
print('read 3: ' + device.parameter_get('current_ranging'))
device.read(contiguous_duration=0.5)
return 0
def run():
count = 0
_quit = False
def stop_fn(*args, **kwargs):
nonlocal _quit
_quit = True
# do not use config='auto' so that we can set io_voltage first.
with scan_require_one(name='Joulescope') as js:
# configure target Joulescope
js.parameter_set('io_voltage', '3.3V')
js.parameter_set('voltage_lsb', 'gpi0')
js.parameter_set('gpo0', '0')
js.parameter_set('gpo1', '0')
js.parameter_set('sensor_power', 'on')
js.parameter_set('source', 'on')
js.parameter_set('i_range', '18 mA')
# start data streaming for 1 second, toggle gpo0 with ~20 ms period
js.start(stop_fn=stop_fn, duration=1.0)
while not _quit:
js.parameter_set('gpo0', str(count & 1))
count += 1
time.sleep(0.01)
# analyze the collected voltage_lsb data for edges
data = js.stream_buffer.samples_get(*js.stream_buffer.sample_id_range,
fields=['current', 'voltage_lsb'])
current = data['signals']['current']['value']
out0 = data['signals']['voltage_lsb']['value']
edges_idx = np.nonzero(np.diff(out0))[0]
edge_count = len(edges_idx)
print(f'Found {edge_count} out0 edges')
# and plot the results
f = plt.figure()
ax_gpi = f.add_subplot(2, 1, 1)
ax_gpi.set_ylabel('GPI')
ax_gpi.grid(True)
ax_i = f.add_subplot(2, 1, 2, sharex=ax_gpi)
ax_i.set_ylabel('Current (A)')
ax_i.grid(True)
ax_i.set_xlabel('Time (samples)')
x_lead = 2
x_lag = 11 # exclusive
x = np.arange(-x_lead, x_lag)
for edge_idx in range(edge_count):
idx = edges_idx[edge_idx]
if idx < x_lead or idx > len(out0) - x_lag:
continue
ax_gpi.plot(x, out0[idx - x_lead:idx + x_lag])
ax_i.plot(x, current[idx - x_lead:idx + x_lag])
plt.show()
plt.close(f)
def _run_sensor(self, args):
device = scan_require_one(config='off')
device.statistics_callback_register(self._on_statistics, 'sensor')
with device:
device.parameter_set('i_range', 'auto')
device.parameter_set('v_range', '15V')
self._display_run_info(args)
while not self._quit:
device.status()
time.sleep(0.1)
def _run_stream_buffer(self, args):
device = scan_require_one(config='auto')
device.parameter_set('buffer_duration', 1)
signal.signal(signal.SIGINT, self._on_user_exit)
with device:
device.statistics_callback = self._on_statistics
device.start(stop_fn=self._on_stop, duration=args.duration)
self._display_run_info(args)
while not self._quit:
time.sleep(0.01)
def run():
args = get_parser().parse_args()
device = scan_require_one(config='ignore')
device.parameter_set('buffer_duration', 10)
if args.sampling_frequency is not None:
device.parameter_set('sampling_frequency',
int(args.sampling_frequency))
signal.signal(signal.SIGINT, _on_stop)
gpo = 0
gpo_count = 0
# Perform the data capture
with device:
device.parameter_set('io_voltage', f'{args.io_voltage:.1f}V')
device.parameter_set('gpo0', 0)
device.parameter_set('gpo1', 1)
if ('in0' in args.start_signal
and args.start in IO_TRIG) or ('in0' in args.end_signal
and args.end in IO_TRIG):
device.parameter_set('current_lsb', 'gpi0')
if ('in1' in args.start_signal
and args.start in IO_TRIG) or ('in1' in args.end_signal
and args.end in IO_TRIG):
device.parameter_set('voltage_lsb', 'gpi1')
capture = Capture(device, args)
device.parameter_set('source', 'on')
_power_off(device, args.init_power_off)
device.parameter_set('i_range', args.current_range)
if args.voltage_range:
device.parameter_set('v_range', args.voltage_range)
device.start(stop_fn=_on_stop)
while not _quit:
time.sleep(0.1)
gpo_count += 1
if gpo_count >= 10:
gpo = 0 if gpo else 1
if args.self_test:
device.parameter_set('gpo0', gpo)
gpo_count = 0
if capture(device.stream_buffer):
break
device.stop() # for CTRL-C handling (safe for duplicate calls)
capture.close()
if args.power_off:
device.parameter_set('i_range', 'off')
return 0
def run():
statistics_queue = queue.Queue() # resynchronize to main thread
def stop_fn(*args, **kwargs):
statistics_queue.put(None) # None signals quit
signal.signal(signal.SIGINT, stop_fn) # also quit on CTRL-C
with scan_require_one(config='auto') as device:
device.statistics_callback = statistics_queue.put # put data in queue
device.start(stop_fn=stop_fn)
print('CTRL-C to exit')
while True:
data = statistics_queue.get()
if data is None:
break
energy = data['accumulators']['energy']
print(three_sig_figs(energy['value'], units=energy['units']))
def run():
statistics_queue = queue.Queue() # resynchronize to main thread
def stop_fn(*args, **kwargs):
statistics_queue.put(None) # None signals quit
signal.signal(signal.SIGINT, stop_fn) # also quit on CTRL-C
with scan_require_one(config='off') as device:
device.statistics_callback_register(statistics_queue.put, 'sensor')
device.parameter_set('i_range', 'auto')
device.parameter_set('v_range', '15V')
print('CTRL-C to exit')
while True:
device.status()
time.sleep(0.1)
try:
data = statistics_queue.get(block=False)
if data is None:
break
energy = data['accumulators']['energy']
print(three_sig_figs(energy['value'], units=energy['units']))
except queue.Empty:
pass
def dut_power(power_on):
i_range = 'auto' if power_on else 'off'
# do not use config='auto' so that power can remain off without a glitch.
with scan_require_one(name='Joulescope') as js:
js.parameter_set('sensor_power', 'on')
js.parameter_set('i_range', i_range)