def kepfoldimg(infile,outfile,datacol,period,phasezero,binmethod,threshold,niter,nbins,
plot,plotlab,clobber,verbose,logfile,status):
# startup parameters
status = 0
labelsize = 24; ticksize = 16; xsize = 17; ysize = 7
lcolor = '#0000ff'; lwidth = 1.0; fcolor = '#ffff00'; falpha = 0.2
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPFOLD -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'datacol='+datacol+' '
call += 'period='+str(period)+' '
call += 'phasezero='+str(phasezero)+' '
call += 'binmethod='+binmethod+' '
call += 'threshold='+str(threshold)+' '
call += 'niter='+str(niter)+' '
call += 'nbins='+str(nbins)+' '
plotres = 'n'
if (plot): plotres = 'y'
call += 'plot='+plotres+ ' '
call += 'plotlab='+plotlab+ ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
# start time
kepmsg.clock('KEPFOLDIMG started at: ',logfile,verbose)
# test log file
logfile = kepmsg.test(logfile)
# clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPFOLDIMG: ' + outfile + ' exists. Use --clobber'
status = kepmsg.err(logfile,message,verbose)
# open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
if status == 0:
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
# fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,infile,logfile,verbose)
# input data
if status == 0:
table = instr[1].data
incards = instr[1].header.cards
indata, status = kepio.readfitscol(infile,table,datacol,logfile,verbose)
barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
# filter out NaNs
work1 = []; work2 = []
if status == 0:
for i in range(len(barytime)):
if (numpy.isfinite(barytime[i]) and
numpy.isfinite(indata[i]) and indata[i] != 0.0):
work1.append(barytime[i])
work2.append(indata[i])
barytime = array(work1,dtype='float64')
indata = array(work2,dtype='float32')
# calculate phase
if status == 0:
phase2 = []
phase1 = (barytime - phasezero) / period
for i in range(len(phase1)):
phase2.append(phase1[i] - int(phase1[i]))
if phase2[-1] < 0.0: phase2[-1] += 1.0
phase2 = array(phase2,'float32')
# sort phases
if status == 0:
ptuple = []
phase3 = []
data3 = []
for i in range(len(phase2)):
ptuple.append([phase2[i], indata[i]])
phsort = sorted(ptuple,key=lambda ph: ph[0])
for i in range(len(phsort)):
phase3.append(phsort[i][0])
data3.append(phsort[i][1])
phase3 = array(phase3,'float32')
data3 = array(data3,'float32')
# bin phases
if status == 0:
work1 = array([data3[0]],'float32')
phase4 = array([],'float32')
data4 = array([],'float32')
dt = (phase3[-1] - phase3[0]) / nbins
nb = 0.0
for i in range(len(phase3)):
if phase3[i] < phase3[0] + nb * dt or phase3[i] >= phase3[0] + (nb + 1.0) * dt:
if len(work1) > 0:
phase4 = append(phase4,phase3[0] + (nb + 0.5) * dt)
if (binmethod == 'mean'):
data4 = append(data4,kepstat.mean(work1))
elif (binmethod == 'median'):
data4 = append(data4,kepstat.median(work1,logfile))
else:
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[1.0],arange(0.0,float(len(work1)),1.0),work1,None,
threshold,threshold,niter,logfile,verbose)
data4 = append(data4,coeffs[0])
work1 = array([],'float32')
nb += 1.0
else:
work1 = append(work1,data3[i])
# update HDU1 for output file
if status == 0:
cols = (instr[1].columns + ColDefs([Column(name='PHASE',format='E',array=phase1)]))
instr[1] = pyfits.new_table(cols)
instr[1].header.cards['TTYPE20'].comment = 'column title: phase'
instr[1].header.cards['TFORM20'].comment = 'data type: float32'
for i in range(len(incards)):
if incards[i].key not in instr[1].header.keys():
instr[1].header.update(incards[i].key, incards[i].value, incards[i].comment)
else:
instr[1].header.cards[incards[i].key].comment = incards[i].comment
instr[1].header.update('PERIOD',period,'period defining the phase [d]')
instr[1].header.update('BJD0',phasezero,'time of phase zero [BJD]')
# write new phased data extension for output file
if status == 0:
col1 = Column(name='PHASE',format='E',array=phase4)
col2 = Column(name=datacol,format='E',unit='e/s',array=data4/cadence)
cols = ColDefs([col1,col2])
instr.append(new_table(cols))
instr[-1].header.cards['TTYPE1'].comment = 'column title: phase'
instr[-1].header.cards['TTYPE2'].comment = 'column title: simple aperture photometry'
instr[-1].header.cards['TFORM1'].comment = 'column type: float32'
instr[-1].header.cards['TFORM2'].comment = 'column type: float32'
instr[-1].header.cards['TUNIT2'].comment = 'column units: electrons per second'
instr[-1].header.update('EXTNAME','FOLDED','extension name')
instr[-1].header.update('PERIOD',period,'period defining the phase [d]')
instr[-1].header.update('BJD0',phasezero,'time of phase zero [BJD]')
instr[-1].header.update('BINMETHD',binmethod,'phase binning method')
if binmethod =='sigclip':
instr[-1].header.update('THRSHOLD',threshold,'sigma-clipping threshold [sigma]')
instr[-1].header.update('NITER',niter,'max number of sigma-clipping iterations')
# history keyword in output file
if status == 0:
status = kepkey.history(call,instr[0],outfile,logfile,verbose)
instr.writeto(outfile)
# close input file
if status == 0:
status = kepio.closefits(instr,logfile,verbose)
# clean up x-axis unit
if status == 0:
ptime = array([],'float32')
pout = array([],'float32')
work = data4
for i in range(len(phase4)):
if (phase4[i] > 0.5):
ptime = append(ptime,phase4[i] - 1.0)
pout = append(pout,work[i] / cadence)
ptime = append(ptime,phase4)
pout = append(pout,work / cadence)
for i in range(len(phase4)):
if (phase4[i] <= 0.5):
ptime = append(ptime,phase4[i] + 1.0)
pout = append(pout,work[i] / cadence)
xlab = 'Phase ($\phi$)'
# clean up y-axis units
if status == 0:
nrm = len(str(int(pout.max())))-1
pout = pout / 10**nrm
ylab = '10$^%d$ %s' % (nrm, plotlab)
# data limits
xmin = ptime.min()
xmax = ptime.max()
ymin = pout.min()
ymax = pout.max()
xr = xmax - xmin
yr = ymax - ymin
ptime = insert(ptime,[0],[ptime[0]])
ptime = append(ptime,[ptime[-1]])
pout = insert(pout,[0],[0.0])
pout = append(pout,0.0)
# plot new light curve
if status == 0 and plot:
try:
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 12,
'legend.fontsize': 12,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize}
pylab.rcParams.update(params)
except:
print 'ERROR -- KEPFOLD: install latex for scientific plotting'
status = 1
if status == 0 and plot:
pylab.figure(1,figsize=[17,7])
pylab.clf()
pylab.axes([0.06,0.1,0.93,0.87])
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.plot(ptime,pout,color=lcolor,linestyle='-',linewidth=lwidth)
fill(ptime,pout,color=fcolor,linewidth=0.0,alpha=falpha)
xlabel(xlab, {'color' : 'k'})
ylabel(ylab, {'color' : 'k'})
xlim(-0.49999,1.49999)
if ymin >= 0.0:
ylim(ymin-yr*0.01,ymax+yr*0.01)
else:
ylim(1.0e-10,ymax+yr*0.01)
pylab.grid()
pylab.draw()
# stop time
kepmsg.clock('KEPFOLDIMG ended at: ',logfile,verbose)
def kepfold(infile,outfile,period,phasezero,bindata,binmethod,threshold,niter,nbins,
rejqual,plottype,plotlab,clobber,verbose,logfile,status,cmdLine=False):
# startup parameters
status = 0
labelsize = 32; ticksize = 18; xsize = 18; ysize = 10
lcolor = '#0000ff'; lwidth = 2.0; fcolor = '#ffff00'; falpha = 0.2
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile,hashline,verbose)
call = 'KEPFOLD -- '
call += 'infile='+infile+' '
call += 'outfile='+outfile+' '
call += 'period='+str(period)+' '
call += 'phasezero='+str(phasezero)+' '
binit = 'n'
if (bindata): binit = 'y'
call += 'bindata='+binit+' '
call += 'binmethod='+binmethod+' '
call += 'threshold='+str(threshold)+' '
call += 'niter='+str(niter)+' '
call += 'nbins='+str(nbins)+' '
qflag = 'n'
if (rejqual): qflag = 'y'
call += 'rejqual='+qflag+ ' '
call += 'plottype='+plottype+ ' '
call += 'plotlab='+plotlab+ ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber='+overwrite+ ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose='+chatter+' '
call += 'logfile='+logfile
kepmsg.log(logfile,call+'\n',verbose)
# start time
kepmsg.clock('KEPFOLD started at',logfile,verbose)
# test log file
logfile = kepmsg.test(logfile)
# clobber output file
if clobber: status = kepio.clobber(outfile,logfile,verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPFOLD: ' + outfile + ' exists. Use --clobber'
status = kepmsg.err(logfile,message,verbose)
# open input file
if status == 0:
instr, status = kepio.openfits(infile,'readonly',logfile,verbose)
if status == 0:
tstart, tstop, bjdref, cadence, status = kepio.timekeys(instr,infile,logfile,verbose,status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
# fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr,file,logfile,verbose)
# input data
if status == 0:
table = instr[1].data
incards = instr[1].header.cards
try:
sap = instr[1].data.field('SAP_FLUX')
except:
try:
sap = instr[1].data.field('ap_raw_flux')
except:
sap = zeros(len(table.field(0)))
try:
saperr = instr[1].data.field('SAP_FLUX_ERR')
except:
try:
saperr = instr[1].data.field('ap_raw_err')
except:
saperr = zeros(len(table.field(0)))
try:
pdc = instr[1].data.field('PDCSAP_FLUX')
except:
try:
pdc = instr[1].data.field('ap_corr_flux')
except:
pdc = zeros(len(table.field(0)))
try:
pdcerr = instr[1].data.field('PDCSAP_FLUX_ERR')
except:
try:
pdcerr = instr[1].data.field('ap_corr_err')
except:
pdcerr = zeros(len(table.field(0)))
try:
cbv = instr[1].data.field('CBVSAP_FLUX')
except:
cbv = zeros(len(table.field(0)))
if 'cbv' in plottype:
txt = 'ERROR -- KEPFOLD: CBVSAP_FLUX column is not populated. Use kepcotrend'
status = kepmsg.err(logfile,txt,verbose)
try:
det = instr[1].data.field('DETSAP_FLUX')
except:
det = zeros(len(table.field(0)))
if 'det' in plottype:
txt = 'ERROR -- KEPFOLD: DETSAP_FLUX column is not populated. Use kepflatten'
status = kepmsg.err(logfile,txt,verbose)
try:
deterr = instr[1].data.field('DETSAP_FLUX_ERR')
except:
deterr = zeros(len(table.field(0)))
if 'det' in plottype:
txt = 'ERROR -- KEPFOLD: DETSAP_FLUX_ERR column is not populated. Use kepflatten'
status = kepmsg.err(logfile,txt,verbose)
try:
quality = instr[1].data.field('SAP_QUALITY')
except:
quality = zeros(len(table.field(0)))
if qualflag:
txt = 'WARNING -- KEPFOLD: Cannot find a QUALITY data column'
kepmsg.warn(logfile,txt)
if status == 0:
barytime, status = kepio.readtimecol(infile,table,logfile,verbose)
barytime1 = copy(barytime)
# filter out NaNs and quality > 0
work1 = []; work2 = []; work3 = []; work4 = []; work5 = []; work6 = []; work8 = []; work9 = []
if status == 0:
if 'sap' in plottype:
datacol = copy(sap)
errcol = copy(saperr)
if 'pdc' in plottype:
datacol = copy(pdc)
errcol = copy(pdcerr)
if 'cbv' in plottype:
datacol = copy(cbv)
errcol = copy(saperr)
if 'det' in plottype:
datacol = copy(det)
errcol = copy(deterr)
for i in range(len(barytime)):
if (numpy.isfinite(barytime[i]) and
numpy.isfinite(datacol[i]) and datacol[i] != 0.0 and
numpy.isfinite(errcol[i]) and errcol[i] > 0.0):
if rejqual and quality[i] == 0:
work1.append(barytime[i])
work2.append(sap[i])
work3.append(saperr[i])
work4.append(pdc[i])
work5.append(pdcerr[i])
work6.append(cbv[i])
work8.append(det[i])
work9.append(deterr[i])
elif not rejqual:
work1.append(barytime[i])
work2.append(sap[i])
work3.append(saperr[i])
work4.append(pdc[i])
work5.append(pdcerr[i])
work6.append(cbv[i])
work8.append(det[i])
work9.append(deterr[i])
barytime = array(work1,dtype='float64')
sap = array(work2,dtype='float32') / cadenom
saperr = array(work3,dtype='float32') / cadenom
pdc = array(work4,dtype='float32') / cadenom
pdcerr = array(work5,dtype='float32') / cadenom
cbv = array(work6,dtype='float32') / cadenom
det = array(work8,dtype='float32') / cadenom
deterr = array(work9,dtype='float32') / cadenom
# calculate phase
if status == 0:
if phasezero < bjdref:
phasezero += bjdref
date1 = (barytime1 + bjdref - phasezero)
phase1 = (date1 / period) - floor(date1/period)
date2 = (barytime + bjdref - phasezero)
phase2 = (date2 / period) - floor(date2/period)
phase2 = array(phase2,'float32')
# sort phases
if status == 0:
ptuple = []
phase3 = [];
sap3 = []; saperr3 = []
pdc3 = []; pdcerr3 = []
cbv3 = []; cbverr3 = []
det3 = []; deterr3 = []
for i in range(len(phase2)):
ptuple.append([phase2[i], sap[i], saperr[i], pdc[i], pdcerr[i], cbv[i], saperr[i], det[i], deterr[i]])
phsort = sorted(ptuple,key=lambda ph: ph[0])
for i in range(len(phsort)):
phase3.append(phsort[i][0])
sap3.append(phsort[i][1])
saperr3.append(phsort[i][2])
pdc3.append(phsort[i][3])
pdcerr3.append(phsort[i][4])
cbv3.append(phsort[i][5])
cbverr3.append(phsort[i][6])
det3.append(phsort[i][7])
deterr3.append(phsort[i][8])
phase3 = array(phase3,'float32')
sap3 = array(sap3,'float32')
saperr3 = array(saperr3,'float32')
pdc3 = array(pdc3,'float32')
pdcerr3 = array(pdcerr3,'float32')
cbv3 = array(cbv3,'float32')
cbverr3 = array(cbverr3,'float32')
det3 = array(det3,'float32')
deterr3 = array(deterr3,'float32')
# bin phases
if status == 0 and bindata:
work1 = array([sap3[0]],'float32')
work2 = array([saperr3[0]],'float32')
work3 = array([pdc3[0]],'float32')
work4 = array([pdcerr3[0]],'float32')
work5 = array([cbv3[0]],'float32')
work6 = array([cbverr3[0]],'float32')
work7 = array([det3[0]],'float32')
work8 = array([deterr3[0]],'float32')
phase4 = array([],'float32')
sap4 = array([],'float32')
saperr4 = array([],'float32')
pdc4 = array([],'float32')
pdcerr4 = array([],'float32')
cbv4 = array([],'float32')
cbverr4 = array([],'float32')
det4 = array([],'float32')
deterr4 = array([],'float32')
dt = 1.0 / nbins
nb = 0.0
rng = numpy.append(phase3,phase3[0]+1.0)
for i in range(len(rng)):
if rng[i] < nb * dt or rng[i] >= (nb + 1.0) * dt:
if len(work1) > 0:
phase4 = append(phase4,(nb + 0.5) * dt)
if (binmethod == 'mean'):
sap4 = append(sap4,kepstat.mean(work1))
saperr4 = append(saperr4,kepstat.mean_err(work2))
pdc4 = append(pdc4,kepstat.mean(work3))
pdcerr4 = append(pdcerr4,kepstat.mean_err(work4))
cbv4 = append(cbv4,kepstat.mean(work5))
cbverr4 = append(cbverr4,kepstat.mean_err(work6))
det4 = append(det4,kepstat.mean(work7))
deterr4 = append(deterr4,kepstat.mean_err(work8))
elif (binmethod == 'median'):
sap4 = append(sap4,kepstat.median(work1,logfile))
saperr4 = append(saperr4,kepstat.mean_err(work2))
pdc4 = append(pdc4,kepstat.median(work3,logfile))
pdcerr4 = append(pdcerr4,kepstat.mean_err(work4))
cbv4 = append(cbv4,kepstat.median(work5,logfile))
cbverr4 = append(cbverr4,kepstat.mean_err(work6))
det4 = append(det4,kepstat.median(work7,logfile))
deterr4 = append(deterr4,kepstat.mean_err(work8))
else:
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work1)],arange(0.0,float(len(work1)),1.0),work1,work2,
threshold,threshold,niter,logfile,False)
sap4 = append(sap4,coeffs[0])
saperr4 = append(saperr4,kepstat.mean_err(work2))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work3)],arange(0.0,float(len(work3)),1.0),work3,work4,
threshold,threshold,niter,logfile,False)
pdc4 = append(pdc4,coeffs[0])
pdcerr4 = append(pdcerr4,kepstat.mean_err(work4))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work5)],arange(0.0,float(len(work5)),1.0),work5,work6,
threshold,threshold,niter,logfile,False)
cbv4 = append(cbv4,coeffs[0])
cbverr4 = append(cbverr4,kepstat.mean_err(work6))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work7)],arange(0.0,float(len(work7)),1.0),work7,work8,
threshold,threshold,niter,logfile,False)
det4 = append(det4,coeffs[0])
deterr4 = append(deterr4,kepstat.mean_err(work8))
work1 = array([],'float32')
work2 = array([],'float32')
work3 = array([],'float32')
work4 = array([],'float32')
work5 = array([],'float32')
work6 = array([],'float32')
work7 = array([],'float32')
work8 = array([],'float32')
nb += 1.0
else:
work1 = append(work1,sap3[i])
work2 = append(work2,saperr3[i])
work3 = append(work3,pdc3[i])
work4 = append(work4,pdcerr3[i])
work5 = append(work5,cbv3[i])
work6 = append(work6,cbverr3[i])
work7 = append(work7,det3[i])
work8 = append(work8,deterr3[i])
# update HDU1 for output file
if status == 0:
cols = (instr[1].columns + ColDefs([Column(name='PHASE',format='E',array=phase1)]))
instr[1] = pyfits.new_table(cols)
instr[1].header.cards['TTYPE'+str(len(instr[1].columns))].comment = 'column title: phase'
instr[1].header.cards['TFORM'+str(len(instr[1].columns))].comment = 'data type: float32'
for i in range(len(incards)):
if incards[i].key not in instr[1].header.keys():
instr[1].header.update(incards[i].key, incards[i].value, incards[i].comment)
else:
instr[1].header.cards[incards[i].key].comment = incards[i].comment
instr[1].header.update('PERIOD',period,'period defining the phase [d]')
instr[1].header.update('BJD0',phasezero,'time of phase zero [BJD]')
# write new phased data extension for output file
if status == 0 and bindata:
col1 = Column(name='PHASE',format='E',array=phase4)
col2 = Column(name='SAP_FLUX',format='E',unit='e/s',array=sap4/cadenom)
col3 = Column(name='SAP_FLUX_ERR',format='E',unit='e/s',array=saperr4/cadenom)
col4 = Column(name='PDC_FLUX',format='E',unit='e/s',array=pdc4/cadenom)
col5 = Column(name='PDC_FLUX_ERR',format='E',unit='e/s',array=pdcerr4/cadenom)
col6 = Column(name='CBV_FLUX',format='E',unit='e/s',array=cbv4/cadenom)
col7 = Column(name='DET_FLUX',format='E',array=det4/cadenom)
col8 = Column(name='DET_FLUX_ERR',format='E',array=deterr4/cadenom)
cols = ColDefs([col1,col2,col3,col4,col5,col6,col7,col8])
instr.append(new_table(cols))
instr[-1].header.cards['TTYPE1'].comment = 'column title: phase'
instr[-1].header.cards['TTYPE2'].comment = 'column title: simple aperture photometry'
instr[-1].header.cards['TTYPE3'].comment = 'column title: SAP 1-sigma error'
instr[-1].header.cards['TTYPE4'].comment = 'column title: pipeline conditioned photometry'
instr[-1].header.cards['TTYPE5'].comment = 'column title: PDC 1-sigma error'
instr[-1].header.cards['TTYPE6'].comment = 'column title: cotrended basis vector photometry'
instr[-1].header.cards['TTYPE7'].comment = 'column title: Detrended aperture photometry'
instr[-1].header.cards['TTYPE8'].comment = 'column title: DET 1-sigma error'
instr[-1].header.cards['TFORM1'].comment = 'column type: float32'
instr[-1].header.cards['TFORM2'].comment = 'column type: float32'
instr[-1].header.cards['TFORM3'].comment = 'column type: float32'
instr[-1].header.cards['TFORM4'].comment = 'column type: float32'
instr[-1].header.cards['TFORM5'].comment = 'column type: float32'
instr[-1].header.cards['TFORM6'].comment = 'column type: float32'
instr[-1].header.cards['TFORM7'].comment = 'column type: float32'
instr[-1].header.cards['TFORM8'].comment = 'column type: float32'
instr[-1].header.cards['TUNIT2'].comment = 'column units: electrons per second'
instr[-1].header.cards['TUNIT3'].comment = 'column units: electrons per second'
instr[-1].header.cards['TUNIT4'].comment = 'column units: electrons per second'
instr[-1].header.cards['TUNIT5'].comment = 'column units: electrons per second'
instr[-1].header.cards['TUNIT6'].comment = 'column units: electrons per second'
instr[-1].header.update('EXTNAME','FOLDED','extension name')
instr[-1].header.update('PERIOD',period,'period defining the phase [d]')
instr[-1].header.update('BJD0',phasezero,'time of phase zero [BJD]')
instr[-1].header.update('BINMETHD',binmethod,'phase binning method')
if binmethod =='sigclip':
instr[-1].header.update('THRSHOLD',threshold,'sigma-clipping threshold [sigma]')
instr[-1].header.update('NITER',niter,'max number of sigma-clipping iterations')
# history keyword in output file
if status == 0:
status = kepkey.history(call,instr[0],outfile,logfile,verbose)
instr.writeto(outfile)
# clean up x-axis unit
if status == 0:
ptime1 = array([],'float32')
ptime2 = array([],'float32')
pout1 = array([],'float32')
pout2 = array([],'float32')
if bindata:
work = sap4
if plottype == 'pdc':
work = pdc4
if plottype == 'cbv':
work = cbv4
if plottype == 'det':
work = det4
for i in range(len(phase4)):
if (phase4[i] > 0.5):
ptime2 = append(ptime2,phase4[i] - 1.0)
pout2 = append(pout2,work[i])
ptime2 = append(ptime2,phase4)
pout2 = append(pout2,work)
for i in range(len(phase4)):
if (phase4[i] <= 0.5):
ptime2 = append(ptime2,phase4[i] + 1.0)
pout2 = append(pout2,work[i])
work = sap3
if plottype == 'pdc':
work = pdc3
if plottype == 'cbv':
work = cbv3
if plottype == 'det':
work = det3
for i in range(len(phase3)):
if (phase3[i] > 0.5):
ptime1 = append(ptime1,phase3[i] - 1.0)
pout1 = append(pout1,work[i])
ptime1 = append(ptime1,phase3)
pout1 = append(pout1,work)
for i in range(len(phase3)):
if (phase3[i] <= 0.5):
ptime1 = append(ptime1,phase3[i] + 1.0)
pout1 = append(pout1,work[i])
xlab = 'Orbital Phase ($\phi$)'
# clean up y-axis units
if status == 0:
nrm = len(str(int(pout1[isfinite(pout1)].max())))-1
pout1 = pout1 / 10**nrm
pout2 = pout2 / 10**nrm
if nrm == 0:
ylab = plotlab
else:
ylab = '10$^%d$ %s' % (nrm, plotlab)
# data limits
xmin = ptime1.min()
xmax = ptime1.max()
ymin = pout1[isfinite(pout1)].min()
ymax = pout1[isfinite(pout1)].max()
xr = xmax - xmin
yr = ymax - ymin
ptime1 = insert(ptime1,[0],[ptime1[0]])
ptime1 = append(ptime1,[ptime1[-1]])
pout1 = insert(pout1,[0],[0.0])
pout1 = append(pout1,0.0)
if bindata:
ptime2 = insert(ptime2,[0],ptime2[0] - 1.0 / nbins)
ptime2 = insert(ptime2,[0],ptime2[0])
ptime2 = append(ptime2,[ptime2[-1] + 1.0 / nbins, ptime2[-1] + 1.0 / nbins])
pout2 = insert(pout2,[0],[pout2[-1]])
pout2 = insert(pout2,[0],[0.0])
pout2 = append(pout2,[pout2[2],0.0])
# plot new light curve
if status == 0 and plottype != 'none':
try:
params = {'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight' : 'bold',
'text.fontsize': 18,
'legend.fontsize': 18,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize}
pylab.rcParams.update(params)
except:
print 'ERROR -- KEPFOLD: install latex for scientific plotting'
status = 1
if status == 0 and plottype != 'none':
pylab.figure(figsize=[17,7])
pylab.clf()
ax = pylab.axes([0.06,0.11,0.93,0.86])
pylab.gca().xaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90)
if bindata:
pylab.fill(ptime2,pout2,color=fcolor,linewidth=0.0,alpha=falpha)
else:
if 'det' in plottype:
pylab.fill(ptime1,pout1,color=fcolor,linewidth=0.0,alpha=falpha)
pylab.plot(ptime1,pout1,color=lcolor,linestyle='',linewidth=lwidth,marker='.')
if bindata:
pylab.plot(ptime2[1:-1],pout2[1:-1],color='r',linestyle='-',linewidth=lwidth,marker='')
xlabel(xlab, {'color' : 'k'})
ylabel(ylab, {'color' : 'k'})
xlim(-0.49999,1.49999)
if ymin >= 0.0:
ylim(ymin-yr*0.01,ymax+yr*0.01)
# ylim(0.96001,1.03999)
else:
ylim(1.0e-10,ymax+yr*0.01)
grid()
if cmdLine:
pylab.show()
else:
pylab.ion()
pylab.plot([])
pylab.ioff()
# close input file
if status == 0:
status = kepio.closefits(instr,logfile,verbose)
# stop time
kepmsg.clock('KEPFOLD ended at: ',logfile,verbose)
def kepfold(infile,
outfile,
period,
phasezero,
bindata,
binmethod,
threshold,
niter,
nbins,
rejqual,
plottype,
plotlab,
clobber,
verbose,
logfile,
status,
cmdLine=False):
# startup parameters
status = 0
labelsize = 32
ticksize = 18
xsize = 18
ysize = 10
lcolor = '#0000ff'
lwidth = 2.0
fcolor = '#ffff00'
falpha = 0.2
# log the call
hashline = '----------------------------------------------------------------------------'
kepmsg.log(logfile, hashline, verbose)
call = 'KEPFOLD -- '
call += 'infile=' + infile + ' '
call += 'outfile=' + outfile + ' '
call += 'period=' + str(period) + ' '
call += 'phasezero=' + str(phasezero) + ' '
binit = 'n'
if (bindata): binit = 'y'
call += 'bindata=' + binit + ' '
call += 'binmethod=' + binmethod + ' '
call += 'threshold=' + str(threshold) + ' '
call += 'niter=' + str(niter) + ' '
call += 'nbins=' + str(nbins) + ' '
qflag = 'n'
if (rejqual): qflag = 'y'
call += 'rejqual=' + qflag + ' '
call += 'plottype=' + plottype + ' '
call += 'plotlab=' + plotlab + ' '
overwrite = 'n'
if (clobber): overwrite = 'y'
call += 'clobber=' + overwrite + ' '
chatter = 'n'
if (verbose): chatter = 'y'
call += 'verbose=' + chatter + ' '
call += 'logfile=' + logfile
kepmsg.log(logfile, call + '\n', verbose)
# start time
kepmsg.clock('KEPFOLD started at', logfile, verbose)
# test log file
logfile = kepmsg.test(logfile)
# clobber output file
if clobber: status = kepio.clobber(outfile, logfile, verbose)
if kepio.fileexists(outfile):
message = 'ERROR -- KEPFOLD: ' + outfile + ' exists. Use --clobber'
status = kepmsg.err(logfile, message, verbose)
# open input file
if status == 0:
instr, status = kepio.openfits(infile, 'readonly', logfile, verbose)
if status == 0:
tstart, tstop, bjdref, cadence, status = kepio.timekeys(
instr, infile, logfile, verbose, status)
if status == 0:
try:
work = instr[0].header['FILEVER']
cadenom = 1.0
except:
cadenom = cadence
# fudge non-compliant FITS keywords with no values
if status == 0:
instr = kepkey.emptykeys(instr, file, logfile, verbose)
# input data
if status == 0:
table = instr[1].data
incards = instr[1].header.cards
try:
sap = instr[1].data.field('SAP_FLUX')
except:
try:
sap = instr[1].data.field('ap_raw_flux')
except:
sap = zeros(len(table.field(0)))
try:
saperr = instr[1].data.field('SAP_FLUX_ERR')
except:
try:
saperr = instr[1].data.field('ap_raw_err')
except:
saperr = zeros(len(table.field(0)))
try:
pdc = instr[1].data.field('PDCSAP_FLUX')
except:
try:
pdc = instr[1].data.field('ap_corr_flux')
except:
pdc = zeros(len(table.field(0)))
try:
pdcerr = instr[1].data.field('PDCSAP_FLUX_ERR')
except:
try:
pdcerr = instr[1].data.field('ap_corr_err')
except:
pdcerr = zeros(len(table.field(0)))
try:
cbv = instr[1].data.field('CBVSAP_FLUX')
except:
cbv = zeros(len(table.field(0)))
if 'cbv' in plottype:
txt = 'ERROR -- KEPFOLD: CBVSAP_FLUX column is not populated. Use kepcotrend'
status = kepmsg.err(logfile, txt, verbose)
try:
det = instr[1].data.field('DETSAP_FLUX')
except:
det = zeros(len(table.field(0)))
if 'det' in plottype:
txt = 'ERROR -- KEPFOLD: DETSAP_FLUX column is not populated. Use kepflatten'
status = kepmsg.err(logfile, txt, verbose)
try:
deterr = instr[1].data.field('DETSAP_FLUX_ERR')
except:
deterr = zeros(len(table.field(0)))
if 'det' in plottype:
txt = 'ERROR -- KEPFOLD: DETSAP_FLUX_ERR column is not populated. Use kepflatten'
status = kepmsg.err(logfile, txt, verbose)
try:
quality = instr[1].data.field('SAP_QUALITY')
except:
quality = zeros(len(table.field(0)))
if qualflag:
txt = 'WARNING -- KEPFOLD: Cannot find a QUALITY data column'
kepmsg.warn(logfile, txt)
if status == 0:
barytime, status = kepio.readtimecol(infile, table, logfile, verbose)
barytime1 = copy(barytime)
# filter out NaNs and quality > 0
work1 = []
work2 = []
work3 = []
work4 = []
work5 = []
work6 = []
work8 = []
work9 = []
if status == 0:
if 'sap' in plottype:
datacol = copy(sap)
errcol = copy(saperr)
if 'pdc' in plottype:
datacol = copy(pdc)
errcol = copy(pdcerr)
if 'cbv' in plottype:
datacol = copy(cbv)
errcol = copy(saperr)
if 'det' in plottype:
datacol = copy(det)
errcol = copy(deterr)
for i in range(len(barytime)):
if (numpy.isfinite(barytime[i]) and numpy.isfinite(datacol[i])
and datacol[i] != 0.0 and numpy.isfinite(errcol[i])
and errcol[i] > 0.0):
if rejqual and quality[i] == 0:
work1.append(barytime[i])
work2.append(sap[i])
work3.append(saperr[i])
work4.append(pdc[i])
work5.append(pdcerr[i])
work6.append(cbv[i])
work8.append(det[i])
work9.append(deterr[i])
elif not rejqual:
work1.append(barytime[i])
work2.append(sap[i])
work3.append(saperr[i])
work4.append(pdc[i])
work5.append(pdcerr[i])
work6.append(cbv[i])
work8.append(det[i])
work9.append(deterr[i])
barytime = array(work1, dtype='float64')
sap = array(work2, dtype='float32') / cadenom
saperr = array(work3, dtype='float32') / cadenom
pdc = array(work4, dtype='float32') / cadenom
pdcerr = array(work5, dtype='float32') / cadenom
cbv = array(work6, dtype='float32') / cadenom
det = array(work8, dtype='float32') / cadenom
deterr = array(work9, dtype='float32') / cadenom
# calculate phase
if status == 0:
if phasezero < bjdref:
phasezero += bjdref
date1 = (barytime1 + bjdref - phasezero)
phase1 = (date1 / period) - floor(date1 / period)
date2 = (barytime + bjdref - phasezero)
phase2 = (date2 / period) - floor(date2 / period)
phase2 = array(phase2, 'float32')
# sort phases
if status == 0:
ptuple = []
phase3 = []
sap3 = []
saperr3 = []
pdc3 = []
pdcerr3 = []
cbv3 = []
cbverr3 = []
det3 = []
deterr3 = []
for i in range(len(phase2)):
ptuple.append([
phase2[i], sap[i], saperr[i], pdc[i], pdcerr[i], cbv[i],
saperr[i], det[i], deterr[i]
])
phsort = sorted(ptuple, key=lambda ph: ph[0])
for i in range(len(phsort)):
phase3.append(phsort[i][0])
sap3.append(phsort[i][1])
saperr3.append(phsort[i][2])
pdc3.append(phsort[i][3])
pdcerr3.append(phsort[i][4])
cbv3.append(phsort[i][5])
cbverr3.append(phsort[i][6])
det3.append(phsort[i][7])
deterr3.append(phsort[i][8])
phase3 = array(phase3, 'float32')
sap3 = array(sap3, 'float32')
saperr3 = array(saperr3, 'float32')
pdc3 = array(pdc3, 'float32')
pdcerr3 = array(pdcerr3, 'float32')
cbv3 = array(cbv3, 'float32')
cbverr3 = array(cbverr3, 'float32')
det3 = array(det3, 'float32')
deterr3 = array(deterr3, 'float32')
# bin phases
if status == 0 and bindata:
work1 = array([sap3[0]], 'float32')
work2 = array([saperr3[0]], 'float32')
work3 = array([pdc3[0]], 'float32')
work4 = array([pdcerr3[0]], 'float32')
work5 = array([cbv3[0]], 'float32')
work6 = array([cbverr3[0]], 'float32')
work7 = array([det3[0]], 'float32')
work8 = array([deterr3[0]], 'float32')
phase4 = array([], 'float32')
sap4 = array([], 'float32')
saperr4 = array([], 'float32')
pdc4 = array([], 'float32')
pdcerr4 = array([], 'float32')
cbv4 = array([], 'float32')
cbverr4 = array([], 'float32')
det4 = array([], 'float32')
deterr4 = array([], 'float32')
dt = 1.0 / nbins
nb = 0.0
rng = numpy.append(phase3, phase3[0] + 1.0)
for i in range(len(rng)):
if rng[i] < nb * dt or rng[i] >= (nb + 1.0) * dt:
if len(work1) > 0:
phase4 = append(phase4, (nb + 0.5) * dt)
if (binmethod == 'mean'):
sap4 = append(sap4, kepstat.mean(work1))
saperr4 = append(saperr4, kepstat.mean_err(work2))
pdc4 = append(pdc4, kepstat.mean(work3))
pdcerr4 = append(pdcerr4, kepstat.mean_err(work4))
cbv4 = append(cbv4, kepstat.mean(work5))
cbverr4 = append(cbverr4, kepstat.mean_err(work6))
det4 = append(det4, kepstat.mean(work7))
deterr4 = append(deterr4, kepstat.mean_err(work8))
elif (binmethod == 'median'):
sap4 = append(sap4, kepstat.median(work1, logfile))
saperr4 = append(saperr4, kepstat.mean_err(work2))
pdc4 = append(pdc4, kepstat.median(work3, logfile))
pdcerr4 = append(pdcerr4, kepstat.mean_err(work4))
cbv4 = append(cbv4, kepstat.median(work5, logfile))
cbverr4 = append(cbverr4, kepstat.mean_err(work6))
det4 = append(det4, kepstat.median(work7, logfile))
deterr4 = append(deterr4, kepstat.mean_err(work8))
else:
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work1)],arange(0.0,float(len(work1)),1.0),work1,work2,
threshold,threshold,niter,logfile,False)
sap4 = append(sap4, coeffs[0])
saperr4 = append(saperr4, kepstat.mean_err(work2))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work3)],arange(0.0,float(len(work3)),1.0),work3,work4,
threshold,threshold,niter,logfile,False)
pdc4 = append(pdc4, coeffs[0])
pdcerr4 = append(pdcerr4, kepstat.mean_err(work4))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work5)],arange(0.0,float(len(work5)),1.0),work5,work6,
threshold,threshold,niter,logfile,False)
cbv4 = append(cbv4, coeffs[0])
cbverr4 = append(cbverr4, kepstat.mean_err(work6))
coeffs, errors, covar, iiter, sigma, chi2, dof, fit, plotx, ploty, status = \
kepfit.lsqclip('poly0',[scipy.stats.nanmean(work7)],arange(0.0,float(len(work7)),1.0),work7,work8,
threshold,threshold,niter,logfile,False)
det4 = append(det4, coeffs[0])
deterr4 = append(deterr4, kepstat.mean_err(work8))
work1 = array([], 'float32')
work2 = array([], 'float32')
work3 = array([], 'float32')
work4 = array([], 'float32')
work5 = array([], 'float32')
work6 = array([], 'float32')
work7 = array([], 'float32')
work8 = array([], 'float32')
nb += 1.0
else:
work1 = append(work1, sap3[i])
work2 = append(work2, saperr3[i])
work3 = append(work3, pdc3[i])
work4 = append(work4, pdcerr3[i])
work5 = append(work5, cbv3[i])
work6 = append(work6, cbverr3[i])
work7 = append(work7, det3[i])
work8 = append(work8, deterr3[i])
# update HDU1 for output file
if status == 0:
cols = (instr[1].columns +
ColDefs([Column(name='PHASE', format='E', array=phase1)]))
instr[1] = pyfits.new_table(cols)
instr[1].header.cards[
'TTYPE' +
str(len(instr[1].columns))].comment = 'column title: phase'
instr[1].header.cards[
'TFORM' +
str(len(instr[1].columns))].comment = 'data type: float32'
for i in range(len(incards)):
if incards[i].key not in list(instr[1].header.keys()):
instr[1].header.update(incards[i].key, incards[i].value,
incards[i].comment)
else:
instr[1].header.cards[
incards[i].key].comment = incards[i].comment
instr[1].header.update('PERIOD', period,
'period defining the phase [d]')
instr[1].header.update('BJD0', phasezero, 'time of phase zero [BJD]')
# write new phased data extension for output file
if status == 0 and bindata:
col1 = Column(name='PHASE', format='E', array=phase4)
col2 = Column(name='SAP_FLUX',
format='E',
unit='e/s',
array=sap4 / cadenom)
col3 = Column(name='SAP_FLUX_ERR',
format='E',
unit='e/s',
array=saperr4 / cadenom)
col4 = Column(name='PDC_FLUX',
format='E',
unit='e/s',
array=pdc4 / cadenom)
col5 = Column(name='PDC_FLUX_ERR',
format='E',
unit='e/s',
array=pdcerr4 / cadenom)
col6 = Column(name='CBV_FLUX',
format='E',
unit='e/s',
array=cbv4 / cadenom)
col7 = Column(name='DET_FLUX', format='E', array=det4 / cadenom)
col8 = Column(name='DET_FLUX_ERR', format='E', array=deterr4 / cadenom)
cols = ColDefs([col1, col2, col3, col4, col5, col6, col7, col8])
instr.append(new_table(cols))
instr[-1].header.cards['TTYPE1'].comment = 'column title: phase'
instr[-1].header.cards[
'TTYPE2'].comment = 'column title: simple aperture photometry'
instr[-1].header.cards[
'TTYPE3'].comment = 'column title: SAP 1-sigma error'
instr[-1].header.cards[
'TTYPE4'].comment = 'column title: pipeline conditioned photometry'
instr[-1].header.cards[
'TTYPE5'].comment = 'column title: PDC 1-sigma error'
instr[-1].header.cards[
'TTYPE6'].comment = 'column title: cotrended basis vector photometry'
instr[-1].header.cards[
'TTYPE7'].comment = 'column title: Detrended aperture photometry'
instr[-1].header.cards[
'TTYPE8'].comment = 'column title: DET 1-sigma error'
instr[-1].header.cards['TFORM1'].comment = 'column type: float32'
instr[-1].header.cards['TFORM2'].comment = 'column type: float32'
instr[-1].header.cards['TFORM3'].comment = 'column type: float32'
instr[-1].header.cards['TFORM4'].comment = 'column type: float32'
instr[-1].header.cards['TFORM5'].comment = 'column type: float32'
instr[-1].header.cards['TFORM6'].comment = 'column type: float32'
instr[-1].header.cards['TFORM7'].comment = 'column type: float32'
instr[-1].header.cards['TFORM8'].comment = 'column type: float32'
instr[-1].header.cards[
'TUNIT2'].comment = 'column units: electrons per second'
instr[-1].header.cards[
'TUNIT3'].comment = 'column units: electrons per second'
instr[-1].header.cards[
'TUNIT4'].comment = 'column units: electrons per second'
instr[-1].header.cards[
'TUNIT5'].comment = 'column units: electrons per second'
instr[-1].header.cards[
'TUNIT6'].comment = 'column units: electrons per second'
instr[-1].header.update('EXTNAME', 'FOLDED', 'extension name')
instr[-1].header.update('PERIOD', period,
'period defining the phase [d]')
instr[-1].header.update('BJD0', phasezero, 'time of phase zero [BJD]')
instr[-1].header.update('BINMETHD', binmethod, 'phase binning method')
if binmethod == 'sigclip':
instr[-1].header.update('THRSHOLD', threshold,
'sigma-clipping threshold [sigma]')
instr[-1].header.update('NITER', niter,
'max number of sigma-clipping iterations')
# history keyword in output file
if status == 0:
status = kepkey.history(call, instr[0], outfile, logfile, verbose)
instr.writeto(outfile)
# clean up x-axis unit
if status == 0:
ptime1 = array([], 'float32')
ptime2 = array([], 'float32')
pout1 = array([], 'float32')
pout2 = array([], 'float32')
if bindata:
work = sap4
if plottype == 'pdc':
work = pdc4
if plottype == 'cbv':
work = cbv4
if plottype == 'det':
work = det4
for i in range(len(phase4)):
if (phase4[i] > 0.5):
ptime2 = append(ptime2, phase4[i] - 1.0)
pout2 = append(pout2, work[i])
ptime2 = append(ptime2, phase4)
pout2 = append(pout2, work)
for i in range(len(phase4)):
if (phase4[i] <= 0.5):
ptime2 = append(ptime2, phase4[i] + 1.0)
pout2 = append(pout2, work[i])
work = sap3
if plottype == 'pdc':
work = pdc3
if plottype == 'cbv':
work = cbv3
if plottype == 'det':
work = det3
for i in range(len(phase3)):
if (phase3[i] > 0.5):
ptime1 = append(ptime1, phase3[i] - 1.0)
pout1 = append(pout1, work[i])
ptime1 = append(ptime1, phase3)
pout1 = append(pout1, work)
for i in range(len(phase3)):
if (phase3[i] <= 0.5):
ptime1 = append(ptime1, phase3[i] + 1.0)
pout1 = append(pout1, work[i])
xlab = 'Orbital Phase ($\phi$)'
# clean up y-axis units
if status == 0:
nrm = len(str(int(pout1[isfinite(pout1)].max()))) - 1
pout1 = pout1 / 10**nrm
pout2 = pout2 / 10**nrm
if nrm == 0:
ylab = plotlab
else:
ylab = '10$^%d$ %s' % (nrm, plotlab)
# data limits
xmin = ptime1.min()
xmax = ptime1.max()
ymin = pout1[isfinite(pout1)].min()
ymax = pout1[isfinite(pout1)].max()
xr = xmax - xmin
yr = ymax - ymin
ptime1 = insert(ptime1, [0], [ptime1[0]])
ptime1 = append(ptime1, [ptime1[-1]])
pout1 = insert(pout1, [0], [0.0])
pout1 = append(pout1, 0.0)
if bindata:
ptime2 = insert(ptime2, [0], ptime2[0] - 1.0 / nbins)
ptime2 = insert(ptime2, [0], ptime2[0])
ptime2 = append(
ptime2, [ptime2[-1] + 1.0 / nbins, ptime2[-1] + 1.0 / nbins])
pout2 = insert(pout2, [0], [pout2[-1]])
pout2 = insert(pout2, [0], [0.0])
pout2 = append(pout2, [pout2[2], 0.0])
# plot new light curve
if status == 0 and plottype != 'none':
try:
params = {
'backend': 'png',
'axes.linewidth': 2.5,
'axes.labelsize': labelsize,
'axes.font': 'sans-serif',
'axes.fontweight': 'bold',
'text.fontsize': 18,
'legend.fontsize': 18,
'xtick.labelsize': ticksize,
'ytick.labelsize': ticksize
}
pylab.rcParams.update(params)
except:
print('ERROR -- KEPFOLD: install latex for scientific plotting')
status = 1
if status == 0 and plottype != 'none':
pylab.figure(figsize=[17, 7])
pylab.clf()
ax = pylab.axes([0.06, 0.11, 0.93, 0.86])
pylab.gca().xaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
pylab.gca().yaxis.set_major_formatter(
pylab.ScalarFormatter(useOffset=False))
labels = ax.get_yticklabels()
setp(labels, 'rotation', 90)
if bindata:
pylab.fill(ptime2,
pout2,
color=fcolor,
linewidth=0.0,
alpha=falpha)
else:
if 'det' in plottype:
pylab.fill(ptime1,
pout1,
color=fcolor,
linewidth=0.0,
alpha=falpha)
pylab.plot(ptime1,
pout1,
color=lcolor,
linestyle='',
linewidth=lwidth,
marker='.')
if bindata:
pylab.plot(ptime2[1:-1],
pout2[1:-1],
color='r',
linestyle='-',
linewidth=lwidth,
marker='')
xlabel(xlab, {'color': 'k'})
ylabel(ylab, {'color': 'k'})
xlim(-0.49999, 1.49999)
if ymin >= 0.0:
ylim(ymin - yr * 0.01, ymax + yr * 0.01)
# ylim(0.96001,1.03999)
else:
ylim(1.0e-10, ymax + yr * 0.01)
grid()
if cmdLine:
pylab.show()
else:
pylab.ion()
pylab.plot([])
pylab.ioff()
# close input file
if status == 0:
status = kepio.closefits(instr, logfile, verbose)
# stop time
kepmsg.clock('KEPFOLD ended at: ', logfile, verbose)
