def _compute_waveform(self, df, f_final):
approx = lalsim.GetApproximantFromString("IMRPhenomP")
phi0 = 0 # what is phi0?
lmbda1 = lmbda2 = 0
ampO = 3
phaseO = 7 # are these PN orders correct for PhenomP?
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
phi0,
df,
self.m1 * MSUN_SI,
self.m2 * MSUN_SI,
self.spin1x,
self.spin1y,
self.spin1z,
self.spin2x,
self.spin2y,
self.spin2z,
self.bank.flow,
f_final,
40.0, # reference frequency, want it to be fixed to a constant value always and forever
1e6 * PC_SI, # irrelevant parameter for banks/banksims
self.iota,
lmbda1,
lmbda2, # irrelevant parameters for BBH
None,
None, # non-GR parameters
ampO,
phaseO,
approx)
# project onto detector
return project_hplus_hcross(hplus_fd, hcross_fd, self.theta, self.phi,
self.psi)
def get_hF2(indx, ifo):
global opts
P = P2_list[indx % nlines2].manual_copy() # looping
if not (opts.fmin_template2 is None):
P.fmin = opts.fmin_template2
if not (opts.fref is None):
P.fref = opts.fref
else:
P.ref = P.fmin
P.radec = True
P.tref = P2_list[indx % nlines2].tref # copy, this is an allocated object
P.deltaF = df
P.deltaT = 1. / opts.srate
P.detector = ifo
P.approx = lalsim.GetApproximantFromString(
opts.approx2) # override the XML. Can screw you up
if P.approx == lalsim.IMRPhenomPv2:
cosbeta = np.cos(P.extract_param('beta'))
my_phase = np.pi - np.pi / 2
dt = 20 * (
P.m1 + P.m2
) / lal.MSUN_SI * lalsimutils.MsunInSec # ad hoc factor .. there is apparently a timeshift of Pv2 relative to PD of about 20 M
P.tref += dt
phiJL_now = P.extract_param('phiJL')
psi_now = P.psi
P.assign_param('phiJL', phiJL_now - my_phase) # Estimate
P.psi = psi_now # fix L alignment, not J
P.phiref += my_phase
P.phiref += np.pi / 2
if opts.verbose:
P.print_params()
hF = lalsimutils.non_herm_hoff(P)
return hF
def hplus_of_f(m1, m2, s1, s2, f_min, f_max, delta_f):
farr = numpy.linspace(0, f_max, f_max / delta_f + delta_f)
spin1 = [0., 0., s1]
spin2 = [0., 0., s2]
hp, hc = lalsim.SimInspiralFD(
m1 * lal.MSUN_SI,
m2 * lal.MSUN_SI,
spin1[0],
spin1[1],
spin1[2],
spin2[0],
spin2[1],
spin2[2],
1.0, # distance (m)
0.0,
0.0, # reference orbital phase (rad)
0.0, # longitude of ascending nodes (rad)
0.0,
0.0, # mean anomaly of periastron
delta_f,
f_min,
f_max + delta_f,
100., # reference frequency (Hz)
None, # LAL dictionary containing accessory parameters
lalsim.GetApproximantFromString("IMRPhenomD"))
assert hp.data.length > 0, "huh!? h+ has zero length!"
return hp.data.data[:len(farr)]
def get_hF2_NR(indx, ifo):
P_here = P2_list[indx % nlines2]
wfP2.P.radec = True
wfP2.P.m1 = P_here.m1
wfP2.P.m2 = P_here.m2
wfP2.P.dist = P_here.dist
wfP2.P.incl = P_here.incl
wfP2.P.theta = P_here.theta
wfP2.P.phi = P_here.phi
wfP2.P.tref = P_here.tref
wfP2.P.psi = P_here.psi
wfP2.P.phiref = P_here.phiref
wfP2.P.fmin = opts.fmin
wfP2.P.deltaF = df
wfP2.P.deltaT = 1. / opts.srate
wfP2.P.detector = ifo
wfP2.P.approx = lalsim.GetApproximantFromString(
opts.approx2) # override the XML. Can screw you up (ref spins)
if opts.verbose:
wfP2.P.print_params()
hF = wfP2.non_herm_hoff()
return hF
def spin_tidal_IMRPhenomD_FD(m1, m2, s1z, s2z, lambda1, lambda2,
f_min, f_max, deltaF=1.0/128.0,
delta_t=1.0/16384.0, distance=1.0, inclination=0.0,
approximant='IMRPhenomD_NRTidal', verbose=True):
# print m1, m2, s1z, s2z, lambda1, lambda2, f_min, delta_t, distance, inclination
f_ref = 0.
phiRef = 0.
# Must have aligned spin
s1x, s1y, s2x, s2y = 0., 0., 0., 0.
# Eccentricity is not part of the model
longAscNodes = 0.
eccentricity = 0.
meanPerAno = 0.
lal_approx = LS.GetApproximantFromString(approximant)
# Insert matter parameters
lal_params = lal.CreateDict()
LS.SimInspiralWaveformParamsInsertTidalLambda1(lal_params, lambda1)
LS.SimInspiralWaveformParamsInsertTidalLambda2(lal_params, lambda2)
# Evaluate FD waveform
Hp, Hc = LS.SimInspiralFD(
m1*lal.MSUN_SI, m2*lal.MSUN_SI,
s1x, s1y, s1z, s2x, s2y, s2z,
distance*lal.PC_SI, inclination, phiRef, longAscNodes, eccentricity, meanPerAno,
deltaF, f_min, f_max, f_ref, lal_params, lal_approx)
f = deltaF * np.arange(Hp.data.length)
return f, Hp, Hc
def get_final_freq(approx, m1, m2, s1z, s2z):
"""
Returns the LALSimulation function which evaluates the final
(highest) frequency for a given approximant using given template
parameters.
NOTE: TaylorTx and TaylorFx are currently all given an ISCO cutoff !!
Parameters
----------
approx : string
Name of the approximant e.g. 'EOBNRv2'
m1 : float or numpy.array
First component mass in solar masses
m2 : float or numpy.array
Second component mass in solar masses
s1z : float or numpy.array
First component dimensionless spin S_1/m_1^2 projected onto L
s2z : float or numpy.array
Second component dimensionless spin S_2/m_2^2 projected onto L
Returns
-------
f : float or numpy.array
Frequency in Hz
"""
lalsim_approx = lalsimulation.GetApproximantFromString(approx)
return _vec_get_final_freq(lalsim_approx, m1, m2, s1z, s2z)
def generateWfparameters(opts):
'''Turn parameters specified by input file and/or command line options into
parameter dictionary that can be used for waveform generation.'''
optsDict = vars(opts)
inputpar = copy.deepcopy(optsDict)
inputpar['m1'] *= lal.MSUN_SI
inputpar['m2'] *= lal.MSUN_SI
inputpar['distance'] *= (1.e6 * lal.PC_SI)
inputpar['approximant'] = lalsim.GetApproximantFromString(
inputpar['approximant'])
if (inputpar['sampleRate'] != defSampleRate):
inputpar['deltaT'] = 1./inputpar['sampleRate']
optsDict['deltaT'] = inputpar['deltaT']
domain = optsDict['domain']
wfinputpar=[inputpar[name] for name in paramnames[domain]]
LALpars=lal.CreateDict()
if (inputpar['lambda1']):
lalsim.SimInspiralWaveformParamsInsertTidalLambda1(LALpars,inputpar['lambda1'])
if (inputpar['lambda2']):
lalsim.SimInspiralWaveformParamsInsertTidalLambda2(LALpars,inputpar['lambda2'])
if (inputpar['ampOrder']!=-1):
lalsim.SimInspiralWaveformParamsInsertPNAmplitudeOrder(LALpars,inputpar['ampOrder'])
if (inputpar['phaseOrder']!=-1):
lalsim.SimInspiralWaveformParamsInsertPNPhaseOrder(LALpars,inputpar['phaseOrder'])
wfinputpar.append(LALpars)
wfinputpar.append(inputpar['approximant'])
return domain, wfinputpar, optsDict
def tmplttime(f0, m1, m2, j1, j2, approx):
dt = 1.0 / 16384.0
approximant = lalsim.GetApproximantFromString(approx)
hp, hc = lalsim.SimInspiralChooseTDWaveform(phiRef=0,
deltaT=dt,
m1=m1,
m2=m2,
s1x=0,
s1y=0,
s1z=j1,
s2x=0,
s2y=0,
s2z=j2,
f_min=f0,
f_ref=0,
r=1,
i=0,
lambda1=0,
lambda2=0,
waveFlags=None,
nonGRparams=None,
amplitudeO=0,
phaseO=0,
approximant=approximant)
h = numpy.array(hp.data.data, dtype=complex)
h += 1j * numpy.array(hc.data.data, dtype=complex)
try:
n = list(abs(h)).index(0)
except ValueError:
n = len(h)
return n * hp.deltaT
def _compute_waveform_comps(self, df, f_final):
approx = lalsim.GetApproximantFromString(self.approximant)
lmbda1 = lmbda2 = 0 # No tidal terms here
ampO = -1 # Are these the correct values??
phaseO = -1 # Are these the correct values??
if lalsim.SimInspiralImplementedFDApproximants(approx):
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
self.orb_phase,
df,
self.m1 * MSUN_SI,
self.m2 * MSUN_SI,
self.spin1x,
self.spin1y,
self.spin1z,
self.spin2x,
self.spin2y,
self.spin2z,
self.bank.flow,
f_final,
self.bank.flow,
1e6 * PC_SI,
self.iota,
lmbda1,
lmbda2, # irrelevant parameters for BBH
None,
None, # non-GR parameters
ampO,
phaseO,
approx)
else:
hplus_fd, hcross_fd = lalsim.SimInspiralFD(
self.orb_phase,
df,
self.m1 * MSUN_SI,
self.m2 * MSUN_SI,
self.spin1x,
self.spin1y,
self.spin1z,
self.spin2x,
self.spin2y,
self.spin2z,
self.bank.flow,
f_final,
self.bank.flow,
1e6 * PC_SI,
0,
self.iota,
lmbda1,
lmbda2, # irrelevant parameters for BBH
None,
None, # non-GR parameters
ampO,
phaseO,
approx)
return hplus_fd, hcross_fd
def hfpc(f,
Mc,
eta,
chi1x,
chi1y,
chi1z,
chi2x,
chi2y,
chi2z,
DL,
tc,
phic,
iota,
approximant,
fRef=0.,
phiRef=0.):
f_min = f[0]
delta_f = f[1] - f[0]
f_max = f[-1] + delta_f
if not fRef: fRef = f_min
m1, m2 = m1_m2_of_M_eta(M_of_Mc_eta(Mc, eta), eta)
m1 *= Msun
m2 *= Msun
r = DL * Mpc
approx = lalsim.GetApproximantFromString(approximant)
hPlus, hCross = lalsim.SimInspiralChooseFDWaveform(m1=m1,
m2=m2,
S1x=chi1x,
S1y=chi1y,
S1z=chi1z,
S2x=chi2x,
S2y=chi2y,
S2z=chi2z,
distance=r,
inclination=iota,
phiRef=phiRef,
longAscNodes=0.,
eccentricity=0.,
meanPerAno=0.,
deltaF=delta_f,
f_min=f_min,
f_max=f_max,
f_ref=fRef,
LALpars=None,
approximant=approx)
pf = exp(1j * (2 * f * pi * tc - phic))
i0 = int(round((f_min - hPlus.f0) / delta_f))
hfp = pf * hPlus.data.data[i0:i0 + len(f)]
hfc = pf * hCross.data.data[i0:i0 + len(f)]
return hfp, hfc
def gstlal_valid_approximant(appx_str):
try:
lalsim.GetApproximantFromString(str(appx_str))
except RuntimeError:
raise ValueError("Approximant not supported by lalsimulation: %s" %
appx_str)
if appx_str not in gstlal_approximants:
raise ValueError(
"Approximant not currently supported by gstlal, but is supported by lalsimulation: %s. Please consider preparing a patch"
% appx_str)
def overestimate_j_from_chi(chi):
"""
Overestimate final black hole spin
"""
return min(
max(
lalsim.SimIMREOBFinalMassSpin(
1, 1, [0, 0, chi], [0, 0, chi],
lalsim.GetApproximantFromString('SEOBNRv2'))[2], abs(chi)),
0.998)
def test_approximant(name, i):
a = lalsim.GetApproximantFromString(name)
assert a == i, (
"The Approximant enum is modified in an non-backward-compatible way, "
"Approximant {name} is {a} but it should be {i}; "
"please append new approximants to the Approximants enum in LALSimInspiral.h, "
"rather than reordering the list".format(
i=i,
a=a,
name=name,
))
def _waveform(param):
# FIXME: Need to be fixed when we take into account precession.
m1, m2, a1z, a2z = param
hp, _ = lalsimulation.SimInspiralChooseFDWaveform(
m1 * lal.MSUN_SI, m2 * lal.MSUN_SI, 0.0, 0.0, a1z, 0.0, 0.0, a2z,
1.0, 0.0, 0.0, 0.0, 0.0, 0.0, deltaF, flow, fhigh, flow, None,
lalsimulation.GetApproximantFromString(approximant))
hp = hp.data.data[start_index::]
if quadratic:
return np.conj(hp) * hp
else:
return hp
def recalculate_waveform(conf):
'''Reads single data set and returns both the reference waveform and the newly calculated
waveform with the same parameters.
Returns: [hpref, hcref, hpnew, hcnew]
'''
approx = lalsim.GetApproximantFromString(
conf.get('approximant', 'approximant'))
domain = conf.get('approximant', 'domain')
if domain == 'TD':
hpref, hcref = [
np.array(map(float, (conf.get('waveform-data', l)).split()))
for l in ['hp', 'hc']
]
if domain == 'FD':
hpRref, hpIref, hcRref, hcIref = [
np.array(map(float, (conf.get('waveform-data', l)).split()))
for l in ['hp_real', 'hp_imag', 'hc_real', 'hc_imag']
]
hpref = hpRref + 1j * hpIref
hcref = hcRref + 1j * hcIref
names = CheckReferenceWaveforms.paramnames[domain]
parDict = dict([
(p, CheckReferenceWaveforms.paramtype[p](conf.get('parameters', p)))
for p in conf.options('parameters')
])
parDict['m1'] *= lal.MSUN_SI
parDict['m2'] *= lal.MSUN_SI
parDict['distance'] *= (1.e6 * lal.PC_SI)
params = [parDict[name] for name in names]
LALpars = lal.CreateDict()
try:
tmp = parDict['lambda1']
except:
tmp = 0.
if (tmp):
lalsim.SimInspiralWaveformParamsInsertTidalLambda1(
LALpars, parDict['lambda1'])
try:
tmp = parDict['lambda2']
except:
tmp = 0.
if (tmp):
lalsim.SimInspiralWaveformParamsInsertTidalLambda2(
LALpars, parDict['lambda2'])
params.append(LALpars)
params.append(approx)
hp, hc = waveformgenerator(domain, params)
return [hpref, hcref, hp, hc]
def legacy_approximant_name(apx):
"""Convert the old style xml approximant name to a name
and phase_order. Alex: I hate this function. Please delet this when we
use Collin's new tables.
"""
apx = str(apx)
try:
order = sim.GetOrderFromString(apx)
except:
print("Warning: Could not read phase order from string, using default")
order = -1
name = sim.GetStringFromApproximant(sim.GetApproximantFromString(apx))
return name, order
def _compute_waveform(self, df, f_final):
"""
The ROM is a frequency domain waveform, so easier.
"""
# get hptilde
approx_enum = lalsim.GetApproximantFromString(
'SEOBNRv2_ROM_DoubleSpin')
flags = lalsim.SimInspiralCreateWaveformFlags()
htilde, _ = lalsim.SimInspiralChooseFDWaveform(
0, df, self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0., 0., self.spin1z,
0., 0., self.spin2z, self.bank.flow, f_final, self.bank.flow,
1e6 * PC_SI, 0., 0., 0., flags, None, 1, 8, approx_enum)
return htilde
def _compute_waveform(self, df, f_final):
phi0 = 0 # This is a reference phase, and not an intrinsic parameter
LALpars = lal.CreateDict()
approx = lalsim.GetApproximantFromString(self.approx_name)
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0., 0., self.spin1z, 0., 0.,
self.spin2z, 1.e6 * PC_SI, 0., phi0, 0., 0., 0., df, self.flow,
f_final, self.flow, LALpars, approx)
# Must set values greater than _get_f_final to 0
act_f_max = self._get_f_final()
f_max_idx = int(act_f_max / df + 0.999)
hplus_fd.data.data[f_max_idx:] = 0
return hplus_fd
def _compute_waveform(self, df, f_final):
approx = lalsim.GetApproximantFromString(self.approximant)
if lalsim.SimInspiralImplementedFDApproximants(approx):
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0., 0., self.spin1z, 0.,
0., self.spin2z, 1e6 * PC_SI, 0., 0., 0., 0., 0., df,
self.bank.flow, f_final, self.bank.flow, None, approx)
else:
hplus_fd, hcross_fd = lalsim.SimInspiralFD(
phi0, df, self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0, 0,
self.spin1z, 0, 0, self.spin2z, 1.e6 * PC_SI, 0., 0., 0., 0.,
0., df, self.bank.flow, f_final, 40., None, approx)
return hplus_fd
def _compute_waveform_comps(self, df, f_final):
approx = lalsim.GetApproximantFromString(self.approximant)
if lalsim.SimInspiralImplementedFDApproximants(approx):
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
self.m1 * MSUN_SI, self.m2 * MSUN_SI, self.spin1x, self.spin1y,
self.spin1z, self.spin2x, self.spin2y, self.spin2z,
1.e6 * PC_SI, self.iota, self.orb_phase, 0., 0., 0., df,
self.flow, f_final, self.flow, None, approx)
else:
hplus_fd, hcross_fd = lalsim.SimInspiralFD(
self.m1 * MSUN_SI, self.m2 * MSUN_SI, self.spin1x, self.spin1y,
self.spin1z, self.spin2x, self.spin2y, self.spin2z,
1.e6 * PC_SI, self.iota, self.orb_phase, 0., 0., 0., df,
self.flow, f_final, self.flow, None, approx)
return hplus_fd, hcross_fd
def _compute_waveform(self, df, f_final):
phi0 = 0 # This is a reference phase, and not an intrinsic parameter
approx = lalsim.GetApproximantFromString(self.approximant)
if lalsim.SimInspiralImplementedFDApproximants(approx):
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0., 0., self.spin1z, 0.,
0., self.spin2z, 1e6 * PC_SI, 0., 0., 0., 0., 0., df,
self.flow, f_final, self.flow, None, approx)
else:
hplus_fd, hcross_fd = lalsim.SimInspiralFD(
phi0, df, self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0, 0,
self.spin1z, 0, 0, self.spin2z, 1.e6 * PC_SI, 0., 0., 0., 0.,
0., df, self.flow, f_final, 40., None, approx)
return hplus_fd
def generateWfparameters(opts):
'''Turn parameters specified by input file and/or command line options into
parameter dictionary that can be used for waveform generation.'''
optsDict = vars(opts)
inputpar = copy.deepcopy(optsDict)
inputpar['m1'] *= lal.MSUN_SI
inputpar['m2'] *= lal.MSUN_SI
inputpar['distance'] *= (1.e6 * lal.PC_SI)
inputpar['approximant'] = lalsim.GetApproximantFromString(
inputpar['approximant'])
inputpar.update({'nonGRparams': None, 'waveformFlags': None})
# nonGRparams and waveformsFlags currently not supported
if (inputpar['sampleRate'] != defSampleRate):
inputpar['deltaT'] = 1. / inputpar['sampleRate']
optsDict['deltaT'] = inputpar['deltaT']
return inputpar, optsDict
def get_approximant_and_orders_from_string(s):
"""Determine the approximant, amplitude order, and phase order for a string
of the form "TaylorT4threePointFivePN". In this example, the waveform is
"TaylorT4" and the phase order is 7 (twice 3.5). If the input contains the
substring "restricted" or "Restricted", then the amplitude order is taken
to be 0. Otherwise, the amplitude order is the same as the phase order."""
# SWIG-wrapped functions apparently do not understand Unicode, but
# often the input argument will come from a Unicode XML file.
s = str(s)
approximant = lalsimulation.GetApproximantFromString(s)
try:
phase_order = lalsimulation.GetOrderFromString(s)
except RuntimeError:
phase_order = -1
if 'restricted' in s or 'Restricted' in s:
amplitude_order = 0
else:
amplitude_order = phase_order
return approximant, amplitude_order, phase_order
def _compute_waveform(self, df, f_final):
flags = lalsim.SimInspiralCreateWaveformFlags()
phi0 = 0 # This is a reference phase, and not an intrinsic parameter
lmbda1 = lmbda2 = 0 # No tidal terms here
ampO = -1 # Are these the correct values??
phaseO = -1 # Are these the correct values??
approx = lalsim.GetApproximantFromString(self.approximant)
if lalsim.SimInspiralImplementedFDApproximants(approx):
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
0, df, self.m1 * MSUN_SI, self.m2 * MSUN_SI, 0., 0.,
self.spin1z, 0., 0., self.spin2z, self.bank.flow, f_final,
self.bank.flow, 1e6 * PC_SI, 0., 0., 0., flags, None, ampO,
phaseO, approx)
else:
hplus_fd, hcross_fd = lalsim.SimInspiralFD(
phi0,
df,
self.m1 * MSUN_SI,
self.m2 * MSUN_SI,
0,
0,
self.spin1z,
0,
0,
self.spin2z,
self.bank.flow,
f_final,
40.0,
1e6 * PC_SI,
0,
0,
lmbda1,
lmbda2, # irrelevant parameters for BBH
None,
None, # non-GR parameters
ampO,
phaseO,
approx)
return hplus_fd
def generate_waveform(m1, m2):
mtot = (m1 + m2) * lal.MTSUN_SI
f_min = 20.0
f_max = 2048.0
df = 1. / 32.
f_rescaled_min = f_min * mtot
f_rescaled_max = f_max * mtot
df_rescaled = mtot * df
hptilde, hctilde = lalsim.SimInspiralChooseFDWaveform( #where is its definition and documentation????
m1 * lalsim.lal.MSUN_SI, #m1
m2 * lalsim.lal.MSUN_SI, #m2
0.,
0.,
.5, #spin vector 1
0.,
0.,
0., #spin vector 2
1. * 1e6 * lalsim.lal.PC_SI, #distance to source
0., #inclination
0., #phi ref
0., #longAscNodes
0., #eccentricity
0., #meanPerAno
1e-3, # frequency incremental step
f_min, # lowest value of frequency
f_max, # highest value of frequency
f_min, #some reference value of frequency (??)
lal.CreateDict(), #some lal dictionary
# lalsim.GetApproximantFromString('IMRPHenomPv2') #approx method for the model
lalsim.GetApproximantFromString('SEOBNRv4_ROM'
) #approx method for the model
)
frequency = np.linspace(0.0, f_max, hptilde.data.length)
rescaled_frequency = frequency * mtot
print(mtot)
return frequency, rescaled_frequency, hptilde.data.data + 1j * hctilde.data.data
def _compute_waveform(self, df, f_final):
phi0 = 0 # This is a reference phase, and not an intrinsic parameter
lmbda1 = lmbda2 = 0 # No tidal terms here
ampO = 0
phaseO = 7
approx = lalsim.GetApproximantFromString(self.approx_name)
wave_flags = lalsim.SimInspiralCreateWaveformFlags()
lalsim.SimInspiralSetSpinOrder(wave_flags, 5)
hplus_fd, hcross_fd = lalsim.SimInspiralChooseFDWaveform(
0,
df,
self.m1 * MSUN_SI,
self.m2 * MSUN_SI,
0,
0,
self.spin1z,
0,
0,
self.spin2z,
self.bank.flow,
f_final,
40.0,
1e6 * PC_SI,
0,
lmbda1,
lmbda2, # irrelevant parameters for BBH
wave_flags,
None, # non-GR parameters
ampO,
phaseO,
approx)
# Must set values greater than _get_f_final to 0
act_f_max = self._get_f_final()
f_max_idx = int(act_f_max / df + 0.999)
hplus_fd.data.data[f_max_idx:] = 0
return hplus_fd
def my_distance(P1, P2):
global IP
global opts
P1.approx = P2.approx = lalsim.GetApproximantFromString(opts.approx)
P1.fmin = P2.fmin = opts.fmin
P1.deltaF = P2.deltaF = 1. / T_window
# if opts.verbose:
# print " ---> Inside distance function < "
# P1.print_params()
# P2.print_params()
dist = 1e5
try:
hF1 = lalsimutils.complex_hoff(P1)
hF2 = lalsimutils.complex_hoff(P2)
rho1 = IP.norm(hF1)
rho2 = IP.norm(hF2)
dist = 1 - np.abs(IP.ip(hF1, hF2) / rho1 / rho2)
except:
print(" Distance evaluation failure ")
if np.isnan(dist):
return 1e5
return dist
def get_hF1(indx, ifo):
global opts
P = P1_list[indx % nlines1].manual_copy() # looping
if not (opts.fmin_template1 is None):
P.fmin = opts.fmin_template1
if not (opts.fref is None):
P.fref = opts.fref
else:
P.ref = P.fmin
P.radec = True
P.tref = P1_list[indx % nlines1].tref # copy, this is an allocated object
P.deltaF = df
P.deltaT = 1. / opts.srate
P.detector = ifo
P.approx = lalsim.GetApproximantFromString(
opts.approx) # override the XML. Can screw you up (ref spins)
# if P.approx == lalsim.IMRPhenomPv2:
# phiJL_now = P.extract_param('phiJL')
# P.assign_param('phiJL', phiJL_now-np.pi/2) # Estimate
# P.fref = 100
if opts.verbose:
P.print_params()
hF = lalsimutils.non_herm_hoff(P)
return hF
def lalsim_FD_waveform(m1,
m2,
s1x,
s1y,
s1z,
s2x,
s2y,
s2z,
theta_jn,
phase,
duration,
dL,
fmax,
lambda_1=None,
lambda_2=None,
**kwarg):
mass1 = m1 * lal.MSUN_SI
mass2 = m2 * lal.MSUN_SI
spin_1x = s1x
spin_1y = s1y
spin_1z = s1z
spin_2x = s2x
spin_2y = s2y
spin_2z = s2z
iota = theta_jn
phaseC = phase # Phase is hard coded to be zero
eccentricity = 0
longitude_ascending_nodes = 0
mean_per_ano = 0
waveform_arg = dict(minimum_freq=20.0, reference_frequency=20)
waveform_arg.update(kwarg)
dL = dL * lal.PC_SI * 1e6 # MPC --> Km
approximant = lalsim.GetApproximantFromString(
waveform_arg["waveform_approximant"])
flow = waveform_arg["minimum_freq"]
delta_freq = 1.0 / duration
maximum_frequency = fmax # 1024.0 # ISCO(m1, m2)
fref = waveform_arg["reference_frequency"]
waveform_dictionary = lal.CreateDict()
if lambda_1 is not None:
lalsim.SimInspiralWaveformParamsInsertTidalLambda1(
waveform_dictionary, float(lambda_1))
if lambda_2 is not None:
lalsim.SimInspiralWaveformParamsInsertTidalLambda2(
waveform_dictionary, float(lambda_2))
hplus, hcross = lalsim.SimInspiralChooseFDWaveform(
mass1,
mass2,
spin_1x,
spin_1y,
spin_1z,
spin_2x,
spin_2y,
spin_2z,
dL,
iota,
phaseC,
longitude_ascending_nodes,
eccentricity,
mean_per_ano,
delta_freq,
flow,
maximum_frequency,
fref,
waveform_dictionary,
approximant,
)
h_plus = hplus.data.data[:]
h_cross = hcross.data.data[:]
return {"plus": h_plus, "cross": h_cross}
def get_WF_and_snr(inj, PSD, sample_rate, instrument="H1", plot_dir=None):
"Given an injection row, it computes the WF and the SNR"
#https://git.ligo.org/lscsoft/gstlal/-/blob/precession_hm-0.2/gstlal-inspiral/bin/gstlal_inspiral_injection_snr
#PSD should be a lal PSD obj
assert instrument in ["H1", "L1", "V1"]
injtime = inj.time_geocent
sample_rate = 16384.0
approximant = lalsimulation.GetApproximantFromString(str(inj.waveform))
f_min = inj.f_lower
h_plus, h_cross = lalsimulation.SimInspiralTD(m1=inj.mass1 * lal.MSUN_SI,
m2=inj.mass2 * lal.MSUN_SI,
S1x=inj.spin1x,
S1y=inj.spin1y,
S1z=inj.spin1z,
S2x=inj.spin2x,
S2y=inj.spin2y,
S2z=inj.spin2z,
distance=inj.distance * 1e6 *
lal.PC_SI,
inclination=inj.inclination,
phiRef=inj.coa_phase,
longAscNodes=0.0,
eccentricity=0.0,
meanPerAno=0.0,
deltaT=1.0 / sample_rate,
f_min=f_min,
f_ref=0.0,
LALparams=None,
approximant=approximant)
h_plus.epoch += injtime
h_cross.epoch += injtime
# Compute strain in the chosen detector.
h = lalsimulation.SimDetectorStrainREAL8TimeSeries(
h_plus, h_cross, inj.longitude, inj.latitude, inj.polarization,
lalsimulation.DetectorPrefixToLALDetector(instrument))
#Compute the SNR
if PSD is not None:
snr = lalsimulation.MeasureSNR(h, PSD, options.flow, options.fmax)
else:
snr = 0.
if isinstance(plot_dir, str):
plt.figure()
plt.title(
"(m1, m2, s1 (x,y,z), s2 (x,y,z), d_L) =\n {0:.2f} {1:.2f} {2:.2f} {3:.2f} {4:.2f} {5:.2f} {6:.2f} {7:.2f} {8:.2f} "
.format(inj.mass1, inj.mass2, inj.spin1x, inj.spin1y, inj.spin1z,
inj.spin2x, inj.spin2y, inj.spin2z, inj.distance))
plt.plot(
np.linspace(0,
len(h_plus.data.data) / sample_rate,
len(h_plus.data.data)), h_plus.data.data)
plt.savefig(plot_dir + '/inj_{}.png'.format(injtime))
#plt.show()
plt.close('all')
return (h.data.data, snr)
