def add(self, dz, **kwds): """Add a layer to the MaterialLayers stacks. Parameters ---------- dz : float or array_like Thickness to add to each stack. Examples -------- >>> from landlab.layers.materiallayers import MaterialLayers Create an empty layer stack with 3 stacks. >>> layers = MaterialLayers(3) >>> layers.number_of_layers 0 To add a layer of uniform thickness to every stack. >>> layers.add(1.5) >>> layers.number_of_layers 1 >>> layers.dz array([[ 1.5, 1.5, 1.5]]) Add a second layer with uneven thickness. >>> layers.add([1., 2., .5]) >>> layers.dz array([[ 2.5, 3.5, 2. ]]) Because the attributes of this layer and the previous layer are the same (e.g. they don't exist), MaterialLayer will combined them. This is the primary difference between MaterialLayers and EventLayers. Adding a layer with negative thickness will remove material from the top of the stack. >>> layers.add(-1) >>> layers.dz array([[ 1.5, 2.5, 1. ]]) >>> layers.number_of_layers 1 Use keywords to track properties of each layer. For instance, here we create a new stack and add a layer with a particular *type* and a particular *size*. You can access the layer properties as if the object were a dictionary. >>> layers = MaterialLayers(3) >>> layers.add(1., type=3., size='sand') >>> layers.dz array([[ 1., 1., 1.]]) >>> layers['type'] array([[ 3., 3., 3.]]) As you can see, there is no rule that says you can't use a string as the value of an attribute. Adding a layer with the same attributes as the entire surface of the MaterialLayers will result in the layers being combined. >>> layers.add(1., type=3., size='sand') >>> layers.add([2, -1, 0], type=3., size='sand') >>> layers.dz array([[ 4., 1., 2.]]) Adding material with different attributes results in the creation of a new layer. >>> layers.add(2., type=6., size='sand') >>> layers.dz array([[ 4., 1., 2.], [ 2., 2., 2.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.]]) >>> np.all(layers['size'] == [['sand', 'sand', 'sand'], ... ['sand', 'sand', 'sand']]) True array([['sand', 'sand', 'sand'], ['sand', 'sand', 'sand']], dtype='<U4') Attributes for each layer will exist even if part the the layer is associated with erosion. >>> layers.add([-2, -1, 1], type=8., size='gravel') >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.], [ 0., 0., 1.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 8., 8., 8.]]) To get the values at the surface of the layer stack: >>> layers.get_surface_values('type') array([ 3., 6., 8.]) Removing enough material such that an entire layer's thickness is no longer present, results in that layer no longer being tracked. This is another difference between MaterialLayers and EventLayers. >>> layers.add([ 0., 0., -1. ]) >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.]]) >>> np.all(layers['size'] == [['sand', 'sand', 'sand'], ... ['sand', 'sand', 'sand']]) True >>> layers.number_of_layers 2 If attributes (like age and size in this example) are tracked, a layer will be combined with the surface layer only if all attributes are the same across the entire layer. Right now, the surface values vary. >>> layers.get_surface_values('type') array([ 3., 6., 6.]) >>> np.all(layers.get_surface_values('size') == ['sand', 'sand', 'sand']) True Since the surface has different types, adding material will create a new layer. >>> layers.add(3., type=6., size='sand') >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.], [ 3., 3., 3.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 6., 6., 6.]]) >>> layers.number_of_layers 3 But now, the entire surface has the qualities of type = 6. and size = 'sand', so layers will be combined. This even works if the thickness of the new layer includes both erosion and deposition. >>> layers.add([ -3.5, 0., 2. ], type=6., size='sand') >>> layers.dz array([[ 3.5, 1. , 2. ], [ 0. , 1. , 2. ], [ 0. , 3. , 5. ]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 6., 6., 6.]]) >>> layers.number_of_layers 3 """ dz = np.asarray(dz) if self.number_of_layers == 0: self._setup_layers(**kwds) compatible = self.number_of_layers > 0 and self.is_compatible( dz, **kwds) if not compatible: self._add_empty_layer() _deposit_or_erode(self._attrs["_dz"], self.number_of_layers, dz) _get_surface_index(self._attrs["_dz"], self.number_of_layers, self._surface_index) self._remove_empty_layers() if not compatible: for name in kwds: self[name][-1] = kwds[name]
def add(self, dz, **kwds): """Add a layer to the MaterialLayers stacks. Parameters ---------- dz : float or array_like Thickness to add to each stack. Examples -------- >>> from landlab.layers.materiallayers import MaterialLayers Create an empty layer stack with 3 stacks. >>> layers = MaterialLayers(3) >>> layers.number_of_layers 0 To add a layer of uniform thickness to every stack. >>> layers.add(1.5) >>> layers.number_of_layers 1 >>> layers.dz array([[ 1.5, 1.5, 1.5]]) Add a second layer with uneven thickness. >>> layers.add([1., 2., .5]) >>> layers.dz array([[ 2.5, 3.5, 2. ]]) Because the attributes of this layer and the previous layer are the same (e.g. they don't exist), MaterialLayer will combined them. This is the primary difference between MaterialLayers and EventLayers. Adding a layer with negative thickness will remove material from the top of the stack. >>> layers.add(-1) >>> layers.dz array([[ 1.5, 2.5, 1. ]]) >>> layers.number_of_layers 1 Use keywords to track properties of each layer. For instance, here we create a new stack and add a layer with a particular *type* and a particular *size*. You can access the layer properties as if the object were a dictionary. >>> layers = MaterialLayers(3) >>> layers.add(1., type=3., size='sand') >>> layers.dz array([[ 1., 1., 1.]]) >>> layers['type'] array([[ 3., 3., 3.]]) As you can see, there is no rule that says you can't use a string as the value of an attribute. Adding a layer with the same attributes as the entire surface of the MaterialLayers will result in the layers being combined. >>> layers.add(1., type=3., size='sand') >>> layers.add([2, -1, 0], type=3., size='sand') >>> layers.dz array([[ 4., 1., 2.]]) Adding material with different attributes results in the creation of a new layer. >>> layers.add(2., type=6., size='sand') >>> layers.dz array([[ 4., 1., 2.], [ 2., 2., 2.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.]]) >>> np.all(layers['size'] == [['sand', 'sand', 'sand'], ... ['sand', 'sand', 'sand']]) True array([['sand', 'sand', 'sand'], ['sand', 'sand', 'sand']], dtype='<U4') Attributes for each layer will exist even if part the the layer is associated with erosion. >>> layers.add([-2, -1, 1], type=8., size='gravel') >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.], [ 0., 0., 1.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 8., 8., 8.]]) To get the values at the surface of the layer stack: >>> layers.get_surface_values('type') array([ 3., 6., 8.]) Removing enough material such that an entire layer's thickness is no longer present, results in that layer no longer being tracked. This is another difference between MaterialLayers and EventLayers. >>> layers.add([ 0., 0., -1. ]) >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.]]) >>> np.all(layers['size'] == [['sand', 'sand', 'sand'], ... ['sand', 'sand', 'sand']]) True >>> layers.number_of_layers 2 If attributes (like age and size in this example) are tracked, a layer will be combined with the surface layer only if all attributes are the same across the entire layer. Right now, the surface values vary. >>> layers.get_surface_values('type') array([ 3., 6., 6.]) >>> np.all(layers.get_surface_values('size') == ['sand', 'sand', 'sand']) True Since the surface has different types, adding material will create a new layer. >>> layers.add(3., type=6., size='sand') >>> layers.dz array([[ 4., 1., 2.], [ 0., 1., 2.], [ 3., 3., 3.]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 6., 6., 6.]]) >>> layers.number_of_layers 3 But now, the entire surface has the qualities of type = 6. and size = 'sand', so layers will be combined. This even works if the thickness of the new layer includes both erosion and deposition. >>> layers.add([ -3.5, 0., 2. ], type=6., size='sand') >>> layers.dz array([[ 3.5, 1. , 2. ], [ 0. , 1. , 2. ], [ 0. , 3. , 5. ]]) >>> layers['type'] array([[ 3., 3., 3.], [ 6., 6., 6.], [ 6., 6., 6.]]) >>> layers.number_of_layers 3 """ dz = np.asarray(dz) if self.number_of_layers == 0: self._setup_layers(**kwds) compatible = self.number_of_layers > 0 and self.is_compatible(dz, **kwds) if not compatible: self._add_empty_layer() _deposit_or_erode(self._attrs['_dz'], self.number_of_layers, dz) _get_surface_index(self._attrs['_dz'], self.number_of_layers, self._surface_index) self._remove_empty_layers() if not compatible: for name in kwds: self[name][-1] = kwds[name]