def add_largefiles(ui, repo, *pats, **opts):
large = opts.pop("large", None)
lfsize = lfutil.getminsize(ui, lfutil.islfilesrepo(repo), opts.pop("lfsize", None))
lfmatcher = None
if lfutil.islfilesrepo(repo):
lfpats = ui.configlist(lfutil.longname, "patterns", default=[])
if lfpats:
lfmatcher = match_.match(repo.root, "", list(lfpats))
lfnames = []
m = scmutil.match(repo[None], pats, opts)
m.bad = lambda x, y: None
wctx = repo[None]
for f in repo.walk(m):
exact = m.exact(f)
lfile = lfutil.standin(f) in wctx
nfile = f in wctx
exists = lfile or nfile
# Don't warn the user when they attempt to add a normal tracked file.
# The normal add code will do that for us.
if exact and exists:
if lfile:
ui.warn(_("%s already a largefile\n") % f)
continue
if exact or not exists:
abovemin = lfsize and os.lstat(repo.wjoin(f)).st_size >= lfsize * 1024 * 1024
if large or abovemin or (lfmatcher and lfmatcher(f)):
lfnames.append(f)
if ui.verbose or not exact:
ui.status(_("adding %s as a largefile\n") % m.rel(f))
bad = []
standins = []
# Need to lock, otherwise there could be a race condition between
# when standins are created and added to the repo.
wlock = repo.wlock()
try:
if not opts.get("dry_run"):
lfdirstate = lfutil.openlfdirstate(ui, repo)
for f in lfnames:
standinname = lfutil.standin(f)
lfutil.writestandin(repo, standinname, hash="", executable=lfutil.getexecutable(repo.wjoin(f)))
standins.append(standinname)
if lfdirstate[f] == "r":
lfdirstate.normallookup(f)
else:
lfdirstate.add(f)
lfdirstate.write()
bad += [lfutil.splitstandin(f) for f in lfutil.repo_add(repo, standins) if f in m.files()]
finally:
wlock.release()
return bad
def addlargefiles(ui, repo, *pats, **opts):
large = opts.pop('large', None)
lfsize = lfutil.getminsize(ui, lfutil.islfilesrepo(repo),
opts.pop('lfsize', None))
lfmatcher = None
if lfutil.islfilesrepo(repo):
lfpats = ui.configlist(lfutil.longname, 'patterns', default=[])
if lfpats:
lfmatcher = match_.match(repo.root, '', list(lfpats))
lfnames = []
m = scmutil.match(repo[None], pats, opts)
m.bad = lambda x, y: None
wctx = repo[None]
for f in repo.walk(m):
exact = m.exact(f)
lfile = lfutil.standin(f) in wctx
nfile = f in wctx
exists = lfile or nfile
# Don't warn the user when they attempt to add a normal tracked file.
# The normal add code will do that for us.
if exact and exists:
if lfile:
ui.warn(_('%s already a largefile\n') % f)
continue
if (exact or not exists) and not lfutil.isstandin(f):
wfile = repo.wjoin(f)
# In case the file was removed previously, but not committed
# (issue3507)
if not os.path.exists(wfile):
continue
abovemin = (lfsize
and os.lstat(wfile).st_size >= lfsize * 1024 * 1024)
if large or abovemin or (lfmatcher and lfmatcher(f)):
lfnames.append(f)
if ui.verbose or not exact:
ui.status(_('adding %s as a largefile\n') % m.rel(f))
bad = []
standins = []
# Need to lock, otherwise there could be a race condition between
# when standins are created and added to the repo.
wlock = repo.wlock()
try:
if not opts.get('dry_run'):
lfdirstate = lfutil.openlfdirstate(ui, repo)
for f in lfnames:
standinname = lfutil.standin(f)
lfutil.writestandin(repo,
standinname,
hash='',
executable=lfutil.getexecutable(
repo.wjoin(f)))
standins.append(standinname)
if lfdirstate[f] == 'r':
lfdirstate.normallookup(f)
else:
lfdirstate.add(f)
lfdirstate.write()
bad += [
lfutil.splitstandin(f) for f in repo[None].add(standins)
if f in m.files()
]
finally:
wlock.release()
return bad
def lfconvert(ui, src, dest, *pats, **opts):
'''convert a normal repository to a largefiles repository
Convert repository SOURCE to a new repository DEST, identical to
SOURCE except that certain files will be converted as largefiles:
specifically, any file that matches any PATTERN *or* whose size is
above the minimum size threshold is converted as a largefile. The
size used to determine whether or not to track a file as a
largefile is the size of the first version of the file. The
minimum size can be specified either with --size or in
configuration as ``largefiles.size``.
After running this command you will need to make sure that
largefiles is enabled anywhere you intend to push the new
repository.
Use --to-normal to convert largefiles back to normal files; after
this, the DEST repository can be used without largefiles at all.'''
if opts['to_normal']:
tolfile = False
else:
tolfile = True
size = lfutil.getminsize(ui, True, opts.get('size'), default=None)
if not hg.islocal(src):
raise util.Abort(_('%s is not a local Mercurial repo') % src)
if not hg.islocal(dest):
raise util.Abort(_('%s is not a local Mercurial repo') % dest)
rsrc = hg.repository(ui, src)
ui.status(_('initializing destination %s\n') % dest)
rdst = hg.repository(ui, dest, create=True)
success = False
dstwlock = dstlock = None
try:
# Lock destination to prevent modification while it is converted to.
# Don't need to lock src because we are just reading from its history
# which can't change.
dstwlock = rdst.wlock()
dstlock = rdst.lock()
# Get a list of all changesets in the source. The easy way to do this
# is to simply walk the changelog, using changelog.nodesbetween().
# Take a look at mercurial/revlog.py:639 for more details.
# Use a generator instead of a list to decrease memory usage
ctxs = (rsrc[ctx] for ctx in rsrc.changelog.nodesbetween(None,
rsrc.heads())[0])
revmap = {node.nullid: node.nullid}
if tolfile:
lfiles = set()
normalfiles = set()
if not pats:
pats = ui.configlist(lfutil.longname, 'patterns', default=[])
if pats:
matcher = match_.match(rsrc.root, '', list(pats))
else:
matcher = None
lfiletohash = {}
for ctx in ctxs:
ui.progress(_('converting revisions'), ctx.rev(),
unit=_('revision'), total=rsrc['tip'].rev())
_lfconvert_addchangeset(rsrc, rdst, ctx, revmap,
lfiles, normalfiles, matcher, size, lfiletohash)
ui.progress(_('converting revisions'), None)
if os.path.exists(rdst.wjoin(lfutil.shortname)):
shutil.rmtree(rdst.wjoin(lfutil.shortname))
for f in lfiletohash.keys():
if os.path.isfile(rdst.wjoin(f)):
os.unlink(rdst.wjoin(f))
try:
os.removedirs(os.path.dirname(rdst.wjoin(f)))
except OSError:
pass
# If there were any files converted to largefiles, add largefiles
# to the destination repository's requirements.
if lfiles:
rdst.requirements.add('largefiles')
rdst._writerequirements()
else:
for ctx in ctxs:
ui.progress(_('converting revisions'), ctx.rev(),
unit=_('revision'), total=rsrc['tip'].rev())
_addchangeset(ui, rsrc, rdst, ctx, revmap)
ui.progress(_('converting revisions'), None)
success = True
finally:
rdst.dirstate.clear()
release(dstlock, dstwlock)
if not success:
# we failed, remove the new directory
shutil.rmtree(rdst.root)
def addlargefiles(ui, repo, *pats, **opts):
large = opts.pop('large', None)
lfsize = lfutil.getminsize(
ui, lfutil.islfilesrepo(repo), opts.pop('lfsize', None))
lfmatcher = None
if lfutil.islfilesrepo(repo):
lfpats = ui.configlist(lfutil.longname, 'patterns', default=[])
if lfpats:
lfmatcher = match_.match(repo.root, '', list(lfpats))
lfnames = []
m = scmutil.match(repo[None], pats, opts)
m.bad = lambda x, y: None
wctx = repo[None]
for f in repo.walk(m):
exact = m.exact(f)
lfile = lfutil.standin(f) in wctx
nfile = f in wctx
exists = lfile or nfile
# Don't warn the user when they attempt to add a normal tracked file.
# The normal add code will do that for us.
if exact and exists:
if lfile:
ui.warn(_('%s already a largefile\n') % f)
continue
if (exact or not exists) and not lfutil.isstandin(f):
wfile = repo.wjoin(f)
# In case the file was removed previously, but not committed
# (issue3507)
if not os.path.exists(wfile):
continue
abovemin = (lfsize and
os.lstat(wfile).st_size >= lfsize * 1024 * 1024)
if large or abovemin or (lfmatcher and lfmatcher(f)):
lfnames.append(f)
if ui.verbose or not exact:
ui.status(_('adding %s as a largefile\n') % m.rel(f))
bad = []
standins = []
# Need to lock, otherwise there could be a race condition between
# when standins are created and added to the repo.
wlock = repo.wlock()
try:
if not opts.get('dry_run'):
lfdirstate = lfutil.openlfdirstate(ui, repo)
for f in lfnames:
standinname = lfutil.standin(f)
lfutil.writestandin(repo, standinname, hash='',
executable=lfutil.getexecutable(repo.wjoin(f)))
standins.append(standinname)
if lfdirstate[f] == 'r':
lfdirstate.normallookup(f)
else:
lfdirstate.add(f)
lfdirstate.write()
bad += [lfutil.splitstandin(f)
for f in repo[None].add(standins)
if f in m.files()]
finally:
wlock.release()
return bad
def lfconvert(ui, src, dest, *pats, **opts):
'''convert a normal repository to a largefiles repository
Convert repository SOURCE to a new repository DEST, identical to
SOURCE except that certain files will be converted as largefiles:
specifically, any file that matches any PATTERN *or* whose size is
above the minimum size threshold is converted as a largefile. The
size used to determine whether or not to track a file as a
largefile is the size of the first version of the file. The
minimum size can be specified either with --size or in
configuration as ``largefiles.size``.
After running this command you will need to make sure that
largefiles is enabled anywhere you intend to push the new
repository.
Use --to-normal to convert largefiles back to normal files; after
this, the DEST repository can be used without largefiles at all.'''
if opts['to_normal']:
tolfile = False
else:
tolfile = True
size = lfutil.getminsize(ui, True, opts.get('size'), default=None)
if not hg.islocal(src):
raise util.Abort(_('%s is not a local Mercurial repo') % src)
if not hg.islocal(dest):
raise util.Abort(_('%s is not a local Mercurial repo') % dest)
rsrc = hg.repository(ui, src)
ui.status(_('initializing destination %s\n') % dest)
rdst = hg.repository(ui, dest, create=True)
success = False
dstwlock = dstlock = None
try:
# Lock destination to prevent modification while it is converted to.
# Don't need to lock src because we are just reading from its history
# which can't change.
dstwlock = rdst.wlock()
dstlock = rdst.lock()
# Get a list of all changesets in the source. The easy way to do this
# is to simply walk the changelog, using changelog.nodesbetween().
# Take a look at mercurial/revlog.py:639 for more details.
# Use a generator instead of a list to decrease memory usage
ctxs = (rsrc[ctx]
for ctx in rsrc.changelog.nodesbetween(None, rsrc.heads())[0])
revmap = {node.nullid: node.nullid}
if tolfile:
lfiles = set()
normalfiles = set()
if not pats:
pats = ui.configlist(lfutil.longname, 'patterns', default=[])
if pats:
matcher = match_.match(rsrc.root, '', list(pats))
else:
matcher = None
lfiletohash = {}
for ctx in ctxs:
ui.progress(_('converting revisions'),
ctx.rev(),
unit=_('revision'),
total=rsrc['tip'].rev())
_lfconvert_addchangeset(rsrc, rdst, ctx, revmap, lfiles,
normalfiles, matcher, size,
lfiletohash)
ui.progress(_('converting revisions'), None)
if os.path.exists(rdst.wjoin(lfutil.shortname)):
shutil.rmtree(rdst.wjoin(lfutil.shortname))
for f in lfiletohash.keys():
if os.path.isfile(rdst.wjoin(f)):
os.unlink(rdst.wjoin(f))
try:
os.removedirs(os.path.dirname(rdst.wjoin(f)))
except OSError:
pass
# If there were any files converted to largefiles, add largefiles
# to the destination repository's requirements.
if lfiles:
rdst.requirements.add('largefiles')
rdst._writerequirements()
else:
for ctx in ctxs:
ui.progress(_('converting revisions'),
ctx.rev(),
unit=_('revision'),
total=rsrc['tip'].rev())
_addchangeset(ui, rsrc, rdst, ctx, revmap)
ui.progress(_('converting revisions'), None)
success = True
finally:
rdst.dirstate.clear()
release(dstlock, dstwlock)
if not success:
# we failed, remove the new directory
shutil.rmtree(rdst.root)
def lfconvert(ui, src, dest, *pats, **opts):
'''convert a normal repository to a largefiles repository
Convert repository SOURCE to a new repository DEST, identical to
SOURCE except that certain files will be converted as largefiles:
specifically, any file that matches any PATTERN *or* whose size is
above the minimum size threshold is converted as a largefile. The
size used to determine whether or not to track a file as a
largefile is the size of the first version of the file. The
minimum size can be specified either with --size or in
configuration as ``largefiles.size``.
After running this command you will need to make sure that
largefiles is enabled anywhere you intend to push the new
repository.
Use --to-normal to convert largefiles back to normal files; after
this, the DEST repository can be used without largefiles at all.'''
if opts['to_normal']:
tolfile = False
else:
tolfile = True
size = lfutil.getminsize(ui, True, opts.get('size'), default=None)
if not hg.islocal(src):
raise error.Abort(_('%s is not a local Mercurial repo') % src)
if not hg.islocal(dest):
raise error.Abort(_('%s is not a local Mercurial repo') % dest)
rsrc = hg.repository(ui, src)
ui.status(_('initializing destination %s\n') % dest)
rdst = hg.repository(ui, dest, create=True)
success = False
dstwlock = dstlock = None
try:
# Get a list of all changesets in the source. The easy way to do this
# is to simply walk the changelog, using changelog.nodesbetween().
# Take a look at mercurial/revlog.py:639 for more details.
# Use a generator instead of a list to decrease memory usage
ctxs = (rsrc[ctx] for ctx in rsrc.changelog.nodesbetween(None,
rsrc.heads())[0])
revmap = {node.nullid: node.nullid}
if tolfile:
# Lock destination to prevent modification while it is converted to.
# Don't need to lock src because we are just reading from its
# history which can't change.
dstwlock = rdst.wlock()
dstlock = rdst.lock()
lfiles = set()
normalfiles = set()
if not pats:
pats = ui.configlist(lfutil.longname, 'patterns', default=[])
if pats:
matcher = match_.match(rsrc.root, '', list(pats))
else:
matcher = None
lfiletohash = {}
for ctx in ctxs:
ui.progress(_('converting revisions'), ctx.rev(),
unit=_('revisions'), total=rsrc['tip'].rev())
_lfconvert_addchangeset(rsrc, rdst, ctx, revmap,
lfiles, normalfiles, matcher, size, lfiletohash)
ui.progress(_('converting revisions'), None)
if rdst.wvfs.exists(lfutil.shortname):
rdst.wvfs.rmtree(lfutil.shortname)
for f in lfiletohash.keys():
if rdst.wvfs.isfile(f):
rdst.wvfs.unlink(f)
try:
rdst.wvfs.removedirs(rdst.wvfs.dirname(f))
except OSError:
pass
# If there were any files converted to largefiles, add largefiles
# to the destination repository's requirements.
if lfiles:
rdst.requirements.add('largefiles')
rdst._writerequirements()
else:
class lfsource(filemap.filemap_source):
def __init__(self, ui, source):
super(lfsource, self).__init__(ui, source, None)
self.filemapper.rename[lfutil.shortname] = '.'
def getfile(self, name, rev):
realname, realrev = rev
f = super(lfsource, self).getfile(name, rev)
if (not realname.startswith(lfutil.shortnameslash)
or f[0] is None):
return f
# Substitute in the largefile data for the hash
hash = f[0].strip()
path = lfutil.findfile(rsrc, hash)
if path is None:
raise error.Abort(_("missing largefile for '%s' in %s")
% (realname, realrev))
return util.readfile(path), f[1]
class converter(convcmd.converter):
def __init__(self, ui, source, dest, revmapfile, opts):
src = lfsource(ui, source)
super(converter, self).__init__(ui, src, dest, revmapfile,
opts)
found, missing = downloadlfiles(ui, rsrc)
if missing != 0:
raise error.Abort(_("all largefiles must be present locally"))
orig = convcmd.converter
convcmd.converter = converter
try:
convcmd.convert(ui, src, dest)
finally:
convcmd.converter = orig
success = True
finally:
if tolfile:
rdst.dirstate.clear()
release(dstlock, dstwlock)
if not success:
# we failed, remove the new directory
shutil.rmtree(rdst.root)
def lfconvert(ui, src, dest, *pats, **opts):
'''convert a normal repository to a largefiles repository
Convert repository SOURCE to a new repository DEST, identical to
SOURCE except that certain files will be converted as largefiles:
specifically, any file that matches any PATTERN *or* whose size is
above the minimum size threshold is converted as a largefile. The
size used to determine whether or not to track a file as a
largefile is the size of the first version of the file. The
minimum size can be specified either with --size or in
configuration as ``largefiles.size``.
After running this command you will need to make sure that
largefiles is enabled anywhere you intend to push the new
repository.
Use --to-normal to convert largefiles back to normal files; after
this, the DEST repository can be used without largefiles at all.'''
if opts['to_normal']:
tolfile = False
else:
tolfile = True
size = lfutil.getminsize(ui, True, opts.get('size'), default=None)
if not hg.islocal(src):
raise error.Abort(_('%s is not a local Mercurial repo') % src)
if not hg.islocal(dest):
raise error.Abort(_('%s is not a local Mercurial repo') % dest)
rsrc = hg.repository(ui, src)
ui.status(_('initializing destination %s\n') % dest)
rdst = hg.repository(ui, dest, create=True)
success = False
dstwlock = dstlock = None
try:
# Get a list of all changesets in the source. The easy way to do this
# is to simply walk the changelog, using changelog.nodesbetween().
# Take a look at mercurial/revlog.py:639 for more details.
# Use a generator instead of a list to decrease memory usage
ctxs = (rsrc[ctx]
for ctx in rsrc.changelog.nodesbetween(None, rsrc.heads())[0])
revmap = {node.nullid: node.nullid}
if tolfile:
# Lock destination to prevent modification while it is converted to.
# Don't need to lock src because we are just reading from its
# history which can't change.
dstwlock = rdst.wlock()
dstlock = rdst.lock()
lfiles = set()
normalfiles = set()
if not pats:
pats = ui.configlist(lfutil.longname, 'patterns', default=[])
if pats:
matcher = match_.match(rsrc.root, '', list(pats))
else:
matcher = None
lfiletohash = {}
for ctx in ctxs:
ui.progress(_('converting revisions'),
ctx.rev(),
unit=_('revisions'),
total=rsrc['tip'].rev())
_lfconvert_addchangeset(rsrc, rdst, ctx, revmap, lfiles,
normalfiles, matcher, size,
lfiletohash)
ui.progress(_('converting revisions'), None)
if rdst.wvfs.exists(lfutil.shortname):
rdst.wvfs.rmtree(lfutil.shortname)
for f in lfiletohash.keys():
if rdst.wvfs.isfile(f):
rdst.wvfs.unlink(f)
try:
rdst.wvfs.removedirs(rdst.wvfs.dirname(f))
except OSError:
pass
# If there were any files converted to largefiles, add largefiles
# to the destination repository's requirements.
if lfiles:
rdst.requirements.add('largefiles')
rdst._writerequirements()
else:
class lfsource(filemap.filemap_source):
def __init__(self, ui, source):
super(lfsource, self).__init__(ui, source, None)
self.filemapper.rename[lfutil.shortname] = '.'
def getfile(self, name, rev):
realname, realrev = rev
f = super(lfsource, self).getfile(name, rev)
if (not realname.startswith(lfutil.shortnameslash)
or f[0] is None):
return f
# Substitute in the largefile data for the hash
hash = f[0].strip()
path = lfutil.findfile(rsrc, hash)
if path is None:
raise error.Abort(
_("missing largefile for '%s' in %s") %
(realname, realrev))
return util.readfile(path), f[1]
class converter(convcmd.converter):
def __init__(self, ui, source, dest, revmapfile, opts):
src = lfsource(ui, source)
super(converter, self).__init__(ui, src, dest, revmapfile,
opts)
found, missing = downloadlfiles(ui, rsrc)
if missing != 0:
raise error.Abort(_("all largefiles must be present locally"))
orig = convcmd.converter
convcmd.converter = converter
try:
convcmd.convert(ui, src, dest)
finally:
convcmd.converter = orig
success = True
finally:
if tolfile:
rdst.dirstate.clear()
release(dstlock, dstwlock)
if not success:
# we failed, remove the new directory
shutil.rmtree(rdst.root)
