def parse_args(): parser = argparse.ArgumentParser( description="Launcher for spp-primary application container") parser = app_helper.add_eal_args(parser) # Application specific arguments parser.add_argument('-n', '--nof-ring', type=int, default=10, help='Maximum number of Ring PMD') parser.add_argument('-p', '--port-mask', type=str, help='Port mask') parser.add_argument('-dv', '--dev-vhost-ids', type=str, help='vhost device IDs') parser.add_argument('-dt', '--dev-tap-ids', type=str, help='TAP device IDs') parser.add_argument('-ip', '--ctrl-ip', type=str, help="IP address of SPP controller") parser.add_argument('--ctrl-port', type=int, default=5555, help="Port of SPP controller") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for spp-primary application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific arguments parser.add_argument('-n', '--nof-ring', type=int, default=10, help='Maximum number of Ring PMD') parser.add_argument('-p', '--port-mask', type=str, help='Port mask') parser.add_argument('-ip', '--ctl-ip', type=str, help="IP address of spp-ctl") parser.add_argument('--ctl-port', type=int, default=5555, help="Port for primary of spp-ctl") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for spp-vm application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific arguments parser.add_argument( '-i', '--sec-id', type=int, help='Secondary ID') parser.add_argument( '-ip', '--ctrl-ip', type=str, help="IP address of SPP controller") parser.add_argument( '--ctrl-port', type=int, default=6666, help="Port of SPP controller") parser.add_argument( '-p', '--port-mask', type=str, help="Port mask") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for suricata container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for l2fwd application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # No application specific args for helloworld parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for l2fwd application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific args parser.add_argument('-p', '--port-mask', type=str, help="Port mask") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for pktgen-dpdk application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) parser.add_argument( '-s', '--pcap-file', type=str, help="PCAP packet flow file of port, defined as 'N:filename'") parser.add_argument('-f', '--script-file', type=str, help="Pktgen script (.pkt) to or a Lua script (.lua)") parser.add_argument('-lf', '--log-file', type=str, help="Filename to write a log, as '-l' of pktgen") parser.add_argument('-P', '--promiscuous', action='store_true', help="Enable PROMISCUOUS mode on all ports") parser.add_argument( '-G', '--sock-default', action='store_true', help="Enable socket support using default server values of " + "localhost:0x5606") parser.add_argument( '-g', '--sock-address', type=str, help="Same as -G but with an optional IP address and port number") parser.add_argument('-T', '--term-color', action='store_true', help="Enable color terminal output in VT100") parser.add_argument('-N', '--numa', action='store_true', help="Enable NUMA support") parser.add_argument('--matrix', type=str, help="Matrix of cores and port as '-m' of pktgen, " + "such as [1:2].0 or 1.0") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for l3fwd-acl application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific args parser.add_argument('-p', '--port-mask', type=str, help='(Mandatory) Port mask') parser.add_argument( '--config', type=str, help='(Mandatory) Define set of port, queue, lcore for ports') parser.add_argument( '-P', '--promiscous', action='store_true', help='Set all ports to promiscous mode (default is None)') parser.add_argument('--rule_ipv4', type=str, help='Specifies the IPv4 ACL and route rules file') parser.add_argument('--rule_ipv6', type=str, help='Specifies the IPv6 ACL and route rules file') parser.add_argument('--scalar', action='store_true', help='Use a scalar function to perform rule lookup') parser.add_argument( '--enable-jumbo', action='store_true', help='Enable jumbo frames, [--enable-jumbo [--max-pkt-len PKTLEN]]') parser.add_argument( '--max-pkt-len', type=int, help='Max packet length (64-9600) if jumbo is enabled.') parser.add_argument('--no-numa', action='store_true', help='Disable NUMA awareness (default is None)') parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for load-balancer application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific args parser.add_argument( '-rx', '--rx-ports', type=str, help="List of rx ports and queues handled by the I/O rx lcores") parser.add_argument( '-tx', '--tx-ports', type=str, help="List of tx ports and queues handled by the I/O tx lcores") parser.add_argument( '-wl', '--worker-lcores', type=str, help="List of worker lcores") parser.add_argument( '-rsz', '--ring-sizes', type=str, help="Ring sizes of 'rx_read,rx_send,w_send,tx_written'") parser.add_argument( '-bsz', '--burst-sizes', type=str, help="Burst sizes of rx, worker or tx") parser.add_argument( '--lpm', type=str, help="List of LPM rules") parser.add_argument( '--pos-lb', type=int, help="Position of the 1-byte field used for identify worker") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for testpmd application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific args parser.add_argument('--pci', action='store_true', help="Enable PCI (default is None)") parser.add_argument('-i', '--interactive', action='store_true', help="Run in interactive mode (default is None)") parser.add_argument( '-a', '--auto-start', action='store_true', help="Start forwarding on initialization (default is None)") parser.add_argument( '--tx-first', action='store_true', help="Start forwarding, after sending a burst of packets first") parser.add_argument( '--stats-period', type=int, help="Period of displaying stats, if interactive is disabled") parser.add_argument('--nb-cores', type=int, help="Number of forwarding cores") parser.add_argument('--coremask', type=str, help="Hexadecimal bitmask of the cores, " + "do not include master lcore") parser.add_argument('--portmask', type=str, help="Hexadecimal bitmask of the ports") parser.add_argument( '--no-numa', action='store_true', help="Disable NUMA-aware allocation of RX/TX rings and RX mbuf") parser.add_argument( '--port-numa-config', type=str, help="Specify port allocation as (port,socket)[,(port,socket)]") parser.add_argument('--ring-numa-config', type=str, help="Specify ring allocation as " + "(port,flag,socket)[,(port,flag,socket)]") parser.add_argument( '--socket-num', type=int, help="Socket from which all memory is allocated in NUMA mode") parser.add_argument( '--mbuf-size', type=int, help="Size of mbufs used to N (< 65536) bytes (default is 2048)") parser.add_argument( '--total-num-mbufs', type=int, help="Number of mbufs allocated in mbuf pools, N > 1024.") parser.add_argument( '--max-pkt-len', type=int, help="Maximum packet size to N (>= 64) bytes (default is 1518)") parser.add_argument('--eth-peers-configfile', type=str, help="Config file of Ether addrs of the peer ports") parser.add_argument('--eth-peer', type=str, help="Set MAC addr of port N as 'N,XX:XX:XX:XX:XX:XX'") parser.add_argument('--pkt-filter-mode', type=str, help="Flow Director mode, " + "'none'(default), 'signature' or 'perfect'") parser.add_argument('--pkt-filter-report-hash', type=str, help="Flow Director hash match mode, " + "'none', 'match'(default) or 'always'") parser.add_argument( '--pkt-filter-size', type=str, help="Flow Director memory size ('64K', '128K', '256K'). " + "The default is 64K.") parser.add_argument( '--pkt-filter-flexbytes-offset', type=int, help="Flexbytes offset (0-32, default is 0x6) defined in " + "words counted from the first byte of the dest MAC address") parser.add_argument('--pkt-filter-drop-queue', type=int, help="Set the drop-queue (default is 127)") parser.add_argument('--disable-crc-strip', action='store_true', help="Disable hardware CRC stripping") parser.add_argument('--enable-lro', action='store_true', help="Enable large receive offload") parser.add_argument('--enable-rx-cksum', action='store_true', help="Enable hardware RX checksum offload") parser.add_argument('--enable-scatter', action='store_true', help="Enable scatter (multi-segment) RX") parser.add_argument('--enable-hw-vlan', action='store_true', help="Enable hardware vlan (default is None)") parser.add_argument('--enable-hw-vlan-filter', action='store_true', help="Enable hardware VLAN filter") parser.add_argument('--enable-hw-vlan-strip', action='store_true', help="Enable hardware VLAN strip") parser.add_argument('--enable-hw-vlan-extend', action='store_true', help="Enable hardware VLAN extend") parser.add_argument('--enable-drop-en', action='store_true', help="Enable per-queue packet drop if no descriptors") parser.add_argument('--disable-rss', action='store_true', help="Disable RSS (Receive Side Scaling") parser.add_argument( '--port-topology', type=str, help="Port topology, 'paired' (the default) or 'chained'") parser.add_argument( '--forward-mode', type=str, help="Forwarding mode, " + "'io' (default), 'mac', 'mac_swap', 'flowgen', 'rxonly', " + "'txonly', 'csum', 'icmpecho', 'ieee1588', 'tm'") parser.add_argument('--rss-ip', action='store_true', help="Set RSS functions for IPv4/IPv6 only") parser.add_argument('--rss-udp', action='store_true', help="Set RSS functions for IPv4/IPv6 and UDP") parser.add_argument( '--rxq', type=int, help="Number of RX queues per port, 1-65535 (default is 1)") parser.add_argument( '--rxd', type=int, help="Number of descriptors in the RX rings (default is 128)") parser.add_argument( '--txq', type=int, help="Number of TX queues per port, 1-65535 (default is 1)") parser.add_argument( '--txd', type=int, help="Number of descriptors in the TX rings (default is 512)") parser.add_argument( '--burst', type=int, help="Number of packets per burst, 1-512 (default is 32)") parser.add_argument( '--mbcache', type=int, help="Cache of mbuf memory pools, 0-512 (default is 16)") parser.add_argument( '--rxpt', type=int, help="Prefetch threshold register of RX rings (default is 8)") parser.add_argument( '--rxht', type=int, help="Host threshold register of RX rings (default is 8)") parser.add_argument( '--rxfreet', type=int, help="Free threshold of RX descriptors,0-'rxd' (default is 0)") parser.add_argument( '--rxwt', type=int, help="Write-back threshold register of RX rings (default is 4)") parser.add_argument( '--txpt', type=int, help="Prefetch threshold register of TX rings (default is 36)") parser.add_argument( '--txht', type=int, help="Host threshold register of TX rings (default is 0)") parser.add_argument( '--txwt', type=int, help="Write-back threshold register of TX rings (default is 0)") parser.add_argument( '--txfreet', type=int, help="Free threshold of RX descriptors, 0-'txd' (default is 0)") parser.add_argument( '--txrst', type=int, help="Transmit RS bit threshold of TX rings, 0-'txd' (default is 0)") parser.add_argument('--rx-queue-stats-mapping', type=str, help="RX queues statistics counters mapping 0-15 as " + "'(port,queue,mapping)[,(port,queue,mapping)]'") parser.add_argument('--tx-queue-stats-mapping', type=str, help="TX queues statistics counters mapping 0-15 as " + "'(port,queue,mapping)[,(port,queue,mapping)]'") parser.add_argument( '--no-flush-rx', action='store_true', help="Don't flush the RX streams before starting forwarding, " + "Used mainly with the PCAP PMD") parser.add_argument('--txpkts', type=str, help="TX segment sizes or total packet length, " + "Valid for tx-only and flowgen") parser.add_argument( '--disable-link-check', action='store_true', help="Disable check on link status when starting/stopping ports") parser.add_argument('--no-lsc-interrupt', action='store_true', help="Disable LSC interrupts for all ports") parser.add_argument('--no-rmv-interrupt', action='store_true', help="Disable RMV interrupts for all ports") parser.add_argument('--bitrate-stats', nargs='*', action='append', type=int, help="Logical core N to perform bitrate calculation") parser.add_argument( '--print-event', type=str, help="Enable printing the occurrence of the designated event, " + "<unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|" + "intr_rmv|dev_probed|dev_released|all>") parser.add_argument( '--mask-event', type=str, help="Disable printing the occurrence of the designated event, " + "<unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|" + "intr_rmv|dev_probed|dev_released|all>") parser.add_argument( '--flow-isolate-all', action='store_true', help="Providing this parameter requests flow API isolated mode " + "on all ports at initialization time") parser.add_argument( '--tx-offloads', type=str, help="Hexadecimal bitmask of TX queue offloads (default is 0)") parser.add_argument( '--hot-plug', action='store_true', help="Enable device event monitor machenism for hotplug") parser.add_argument( '--vxlan-gpe-port', type=int, help="UDP port number of tunnel VXLAN-GPE (default is 4790)") parser.add_argument('--mlockall', action='store_true', help="Enable locking all memory") parser.add_argument('--no-mlockall', action='store_true', help="Disable locking all memory") parser = app_helper.add_sppc_args(parser) return parser.parse_args()
def parse_args(): parser = argparse.ArgumentParser( description="Launcher for l3fwd application container") parser = app_helper.add_eal_args(parser) parser = app_helper.add_appc_args(parser) # Application specific args parser.add_argument('-p', '--port-mask', type=str, help='(Mandatory) Port mask') parser.add_argument( '--config', type=str, help='(Mandatory) Define set of port, queue, lcore for ports') parser.add_argument( '-P', '--promiscous', action='store_true', help='Set all ports to promiscous mode (default is None)') parser.add_argument('-E', '--exact-match', action='store_true', help='Enable exact match (default is None)') parser.add_argument('-L', '--longest-prefix-match', action='store_true', help='Enable longest prefix match (default is None)') parser.add_argument('-dst', '--eth-dest', nargs='*', action='append', type=str, help='Ethernet dest for port X (X,MM:MM:MM:MM:MM:MM)') parser.add_argument( '--enable-jumbo', action='store_true', help='Enable jumbo frames, [--enable-jumbo [--max-pkt-len PKTLEN]]') parser.add_argument( '--max-pkt-len', type=int, help='Max packet length (64-9600) if jumbo is enabled.') parser.add_argument('--no-numa', action='store_true', help='Disable NUMA awareness (default is None)') parser.add_argument( '--hash-entry-num', action='store_true', help='Specify the hash entry number in hexadecimal (default is None)') parser.add_argument( '--ipv6', action='store_true', help='Specify the hash entry number in hexadecimal (default is None)') parser.add_argument( '--parse-ptype', type=str, default='ipv4', help='Set analyze packet type, ipv4 or ipv6 (default is ipv4)') parser = app_helper.add_sppc_args(parser) return parser.parse_args()