def bruter(url):
'''
@description: 扫描插件入口函数
@param {url:目标}
@return:
'''
#全局url，给crawl、fuzz模块使用。FIXME
conf.url = url
#url初始化
conf.parsed_url = urllib.parse.urlparse(url)
#填补协议
if conf.parsed_url.scheme != 'http' and conf.parsed_url.scheme != 'https':
url = 'http://' + url
conf.parsed_url = urllib.parse.urlparse(url)
#填补url后的/
if not url.endswith('/'):
url = url + '/'
#加载payloads
#添加payloads是否加载成功判断
payloads.all_payloads = ScanModeHandler()
if payloads.all_payloads == None:
outputscreen.error('[x] load payloads error!')
if conf.dict_mode:
outputscreen.error('[x] plz check dict mode config!')
if conf.blast_mode:
outputscreen.error('[x] plz check blast mode config!')
if conf.crawl_mode:
outputscreen.error('[x] plz check crawl mode config!')
if conf.fuzz_mode:
outputscreen.error('[x] plz check fuzz mode config!')
sys.exit()
#FIXME:设置后缀名。当前以拼接方式实现，遍历一遍payload。
try:
if conf.file_extension:
outputscreen.warning('[+] Use file extentsion: {}'.format(
conf.file_extension))
for i in range(len(payloads.all_payloads)):
payloads.all_payloads[i] += conf.file_extension
except:
outputscreen.error('[+] plz check extension!')
#debug模式，打印所有payload，并退出
if conf.debug:
outputscreen.blue('[+] all payloads:{}'.format(payloads.all_payloads))
sys.exit()
#payload入队task队列
for payload in payloads.all_payloads:
#FIXME:添加fuzz模式时，引入的url_payload构造判断
if conf.fuzz_mode:
url_payload = conf.parsed_url.scheme + '://' + conf.parsed_url.netloc + payload
else:
url_payload = url + payload
#payload入队，等待处理
tasks.all_task.put(url_payload)
#设置进度条长度，若是递归模式，则不设置任务队列长度，即无法显示进度，仅显示耗时
if not conf.recursive_scan:
tasks.task_length = tasks.all_task.qsize()
bar.log.start(tasks.task_length)
#FIXME:循环任务数不能一次性取完所有的task，暂时采用每次执行30个任务。这样写还能解决hub.LoopExit的bug
while not tasks.all_task.empty():
all_task = [gevent.spawn(boss) for i in range(conf.request_limit)]
gevent.joinall(all_task)
def printProgress():
msg = '%s found | %s remaining | %s scanned in %.2f seconds' % (
th.found_count, th.target.qsize(), th.scan_count,
time.time() - th.start_time)
out = '\r' + ' ' * (th.console_width - len(msg)) + msg
outputscreen.blue(out)
def bruter(url):
'''
@description: 扫描插件入口函数
@param {url:目标}
@return:
'''
#url初始化
conf.parsed_url = urllib.parse.urlparse(url)
#填补协议
if conf.parsed_url.scheme != 'http' and conf.parsed_url.scheme != 'https':
url = 'http://' + url
conf.parsed_url = urllib.parse.urlparse(url)
#全局target的url，给crawl、fuzz模块使用。XXX:要放在填补url之前，否则fuzz模式会出现这样的问题：https://target.com/phpinfo.{dir}/
conf.url = url
#填补url后的/
if not url.endswith('/'):
url = url + '/'
#打印当前target
msg = '[+] Current target: {}'.format(url)
outputscreen.success('\r' + msg + ' ' * (th.console_width - len(msg) + 1))
#自动识别404-预先获取404页面特征
if conf.auto_check_404_page:
outputscreen.warning("[*] Launching auto check 404")
# Autodiscriminator (probably deprecated by future diagnostic subsystem)
i = Inspector(url)
(result, notfound_type) = i.check_this()
if notfound_type == Inspector.TEST404_MD5 or notfound_type == Inspector.TEST404_OK:
conf.autodiscriminator_md5.add(result)
#加载payloads
payloads.all_payloads = scanModeHandler()
#FIXME:设置后缀名。当前以拼接方式实现，遍历一遍payload。
try:
if conf.file_extension:
outputscreen.warning('[+] Use file extentsion: {}'.format(
conf.file_extension))
for i in range(len(payloads.all_payloads)):
payloads.all_payloads[i] += conf.file_extension
except:
outputscreen.error('[+] plz check extension!')
sys.exit()
#debug模式，打印所有payload，并退出
if conf.debug:
outputscreen.blue('[+] all payloads:{}'.format(payloads.all_payloads))
sys.exit()
#payload入队task队列
for payload in payloads.all_payloads:
#FIXME:添加fuzz模式时，引入的url_payload构造判断
if conf.fuzz_mode:
url_payload = conf.parsed_url.scheme + '://' + conf.parsed_url.netloc + payload
else:
url_payload = url + payload
#print(url_payload)
#payload入队，等待处理
tasks.all_task.put(url_payload)
#设置进度条长度，若是递归模式或爬虫模式，则不设置任务队列长度，即无法显示进度，仅显示耗时
if not conf.recursive_scan:
#NOTE:这里取所有payloads的长度*target数量计算任务总数，修复issue#2
tasks.task_length = len(payloads.all_payloads) * conf.target_nums
bar.log.start(tasks.task_length)
#FIXME:循环任务数不能一次性取完所有的task，暂时采用每次执行30个任务。这样写还能解决hub.LoopExit的bug
while not tasks.all_task.empty():
all_task = [gevent.spawn(boss) for i in range(conf.request_limit)]
gevent.joinall(all_task)
def bruter(url):
'''
@description: 扫描插件入口函数
@param {url:目标}
@return:
'''
#全局target的url，给crawl、fuzz模块使用。FIXME
conf.url = url
#url初始化
conf.parsed_url = urllib.parse.urlparse(url)
#填补协议
if conf.parsed_url.scheme != 'http' and conf.parsed_url.scheme != 'https':
url = 'http://' + url
conf.parsed_url = urllib.parse.urlparse(url)
#填补url后的/
if not url.endswith('/'):
url = url + '/'
#自动识别404-预先获取404页面特征
if conf.auto_check_404_page:
outputscreen.warning("[*] Launching auto check 404")
# Autodiscriminator (probably deprecated by future diagnostic subsystem)
i = Inspector(url)
(result, notfound_type) = i.check_this()
if notfound_type == Inspector.TEST404_URL:
conf.autodiscriminator_location = result
outputscreen.success("[+] 404 ---> 302 ----> {}".format(
conf.autodiscriminator_location))
elif notfound_type == Inspector.TEST404_MD5:
conf.autodiscriminator_md5 = result
outputscreen.success("[+] 404 ---> PAGE_MD5 ----> {}".format(
conf.autodiscriminator_md5))
#加载payloads
#添加payloads是否加载成功判断
payloads.all_payloads = scanModeHandler()
if payloads.all_payloads == None:
outputscreen.error('[x] load payloads error!')
if conf.dict_mode:
outputscreen.error('[x] plz check dict mode config!')
if conf.blast_mode:
outputscreen.error('[x] plz check blast mode config!')
if conf.crawl_mode:
outputscreen.error('[x] plz check crawl mode config!')
if conf.fuzz_mode:
outputscreen.error('[x] plz check fuzz mode config!')
sys.exit()
#FIXME:设置后缀名。当前以拼接方式实现，遍历一遍payload。
try:
if conf.file_extension:
outputscreen.warning('[+] Use file extentsion: {}'.format(
conf.file_extension))
for i in range(len(payloads.all_payloads)):
payloads.all_payloads[i] += conf.file_extension
except:
outputscreen.error('[+] plz check extension!')
#debug模式，打印所有payload，并退出
if conf.debug:
outputscreen.blue('[+] all payloads:{}'.format(payloads.all_payloads))
sys.exit()
#payload入队task队列
for payload in payloads.all_payloads:
#FIXME:添加fuzz模式时，引入的url_payload构造判断
if conf.fuzz_mode:
url_payload = conf.parsed_url.scheme + '://' + conf.parsed_url.netloc + payload
else:
url_payload = url + payload
#payload入队，等待处理
tasks.all_task.put(url_payload)
#设置进度条长度，若是递归模式，则不设置任务队列长度，即无法显示进度，仅显示耗时
if not conf.recursive_scan:
tasks.task_length = tasks.all_task.qsize()
bar.log.start(tasks.task_length)
#FIXME:循环任务数不能一次性取完所有的task，暂时采用每次执行30个任务。这样写还能解决hub.LoopExit的bug
while not tasks.all_task.empty():
all_task = [gevent.spawn(boss) for i in range(conf.request_limit)]
gevent.joinall(all_task)
