def __init__(self, **kwargs):
platform = sim.Platform()
SoCSDRAM.__init__(self, platform,
clk_freq=int((1/(platform.default_clk_period))*1000000000),
integrated_rom_size=0x8000,
ident="LiteX simulation example design",
with_uart=False,
**kwargs)
self.submodules.crg = CRG(platform.request(platform.default_clk_name))
self.submodules.uart_phy = uart.RS232PHYModel(platform.request("serial"))
self.submodules.uart = uart.UART(self.uart_phy)
if not self.integrated_main_ram_size:
sdram_module = IS42S16160(self.clk_freq, "1:1")
phy_settings = PhySettings(
memtype="SDR",
dfi_databits=1*16,
nphases=1,
rdphase=0,
wrphase=0,
rdcmdphase=0,
wrcmdphase=0,
cl=2,
read_latency=4,
write_latency=0
)
self.submodules.sdrphy = SDRAMPHYModel(sdram_module, phy_settings)
self.register_sdram(self.sdrphy,
sdram_module.geom_settings,
sdram_module.timing_settings,
controller_settings=ControllerSettings(with_refresh=False))
# reduce memtest size to speed up simulation
self.add_constant("MEMTEST_DATA_SIZE", 8*1024)
self.add_constant("MEMTEST_ADDR_SIZE", 8*1024)
def __init__(self,
firmware_ram_size=0x10000,
firmware_filename="firmware/firmware.bin",
**kwargs):
platform = sim.Platform()
SoCSDRAM.__init__(self, platform,
clk_freq=int((1/(platform.default_clk_period))*1000000000),
integrated_rom_size=0x8000,
integrated_sram_size=0x8000,
with_uart=False,
**kwargs)
self.submodules.crg = CRG(platform.request(platform.default_clk_name))
self.submodules.uart_phy = uart.RS232PHYModel(platform.request("serial"))
self.submodules.uart = uart.UART(self.uart_phy)
# firmware
self.submodules.firmware_ram = firmware.FirmwareROM(firmware_ram_size, firmware_filename)
self.register_mem("firmware_ram", self.mem_map["firmware_ram"], self.firmware_ram.bus, firmware_ram_size)
self.add_constant("ROM_BOOT_ADDRESS", self.mem_map["firmware_ram"])
# sdram
sdram_module = IS42S16160(self.clk_freq, "1:1")
phy_settings = PhySettings(
memtype="SDR",
dfi_databits=1*32,
nphases=1,
rdphase=0,
wrphase=0,
rdcmdphase=0,
wrcmdphase=0,
cl=2,
read_latency=4,
write_latency=0
)
self.submodules.sdrphy = SDRAMPHYModel(sdram_module, phy_settings)
controller_settings = ControllerSettings(with_refresh=False)
self.register_sdram(self.sdrphy,
sdram_module.geom_settings,
sdram_module.timing_settings,
controller_settings=controller_settings)
# reduce memtest size to speed up simulation
self.add_constant("MEMTEST_DATA_SIZE", 1024)
self.add_constant("MEMTEST_ADDR_SIZE", 1024)
self.add_constant("SIMULATION", 1)
self.submodules.video_out = VideoOutCore(self.sdram.crossbar.get_port())
self.submodules.vga = VGAModel(platform.request("vga"))
self.comb += self.video_out.source.connect(self.vga.sink)
def __init__(self,
with_sdram=False,
with_ethernet=False,
with_etherbone=False, etherbone_mac_address=0x10e2d5000000, etherbone_ip_address="192.168.1.50",
with_analyzer=False,
**kwargs):
platform = sim.Platform()
SoCSDRAM.__init__(self, platform,
clk_freq=int(1e9/platform.default_clk_period),
integrated_rom_size=0x8000,
ident="LiteX Simulation", ident_version=True,
with_uart=False,
**kwargs)
# crg
self.submodules.crg = CRG(platform.request(platform.default_clk_name))
# serial
self.submodules.uart_phy = uart.RS232PHYModel(platform.request("serial"))
self.submodules.uart = uart.UART(self.uart_phy)
# sdram
if with_sdram:
sdram_module = IS42S16160(self.clk_freq, "1:1")
phy_settings = PhySettings(
memtype="SDR",
dfi_databits=1*16,
nphases=1,
rdphase=0,
wrphase=0,
rdcmdphase=0,
wrcmdphase=0,
cl=2,
read_latency=4,
write_latency=0
)
self.submodules.sdrphy = SDRAMPHYModel(sdram_module, phy_settings)
self.register_sdram(
self.sdrphy,
sdram_module.geom_settings,
sdram_module.timing_settings,
controller_settings=ControllerSettings(with_refresh=False))
# reduce memtest size for simulation speedup
self.add_constant("MEMTEST_DATA_SIZE", 8*1024)
self.add_constant("MEMTEST_ADDR_SIZE", 8*1024)
assert not (with_ethernet and with_etherbone) # FIXME: fix simulator with 2 ethernet interfaces
# ethernet
if with_ethernet:
# eth phy
self.submodules.ethphy = LiteEthPHYModel(self.platform.request("eth", 0))
# eth mac
ethmac = LiteEthMAC(phy=self.ethphy, dw=32,
interface="wishbone", endianness=self.cpu_endianness)
if with_etherbone:
ethmac = ClockDomainsRenamer({"eth_tx": "ethphy_eth_tx", "eth_rx": "ethphy_eth_rx"})(ethmac)
self.submodules.ethmac = ethmac
self.add_wb_slave(mem_decoder(self.mem_map["ethmac"]), self.ethmac.bus)
self.add_memory_region("ethmac", self.mem_map["ethmac"] | self.shadow_base, 0x2000)
# etherbone
if with_etherbone:
# eth phy
self.submodules.etherbonephy = LiteEthPHYModel(self.platform.request("eth", 0)) # FIXME
# eth core
etherbonecore = LiteEthUDPIPCore(self.etherbonephy,
etherbone_mac_address, convert_ip(etherbone_ip_address), self.clk_freq)
if with_ethernet:
etherbonecore = ClockDomainsRenamer({"eth_tx": "etherbonephy_eth_tx", "eth_rx": "etherbonephy_eth_rx"})(etherbonecore)
self.submodules.etherbonecore = etherbonecore
# etherbone
self.submodules.etherbone = LiteEthEtherbone(self.etherbonecore.udp, 1234, mode="master")
self.add_wb_master(self.etherbone.wishbone.bus)
# analyzer
if with_analyzer:
analyzer_signals = [
# FIXME: find interesting signals to probe
self.cpu_or_bridge.ibus,
self.cpu_or_bridge.dbus
]
self.submodules.analyzer = LiteScopeAnalyzer(analyzer_signals, 512)
