def pingTest(self): #Ping Test to verify IP address configuration
topodata = getData('Topology.json')
Routers = topodata['Device_details'].keys()
Routers.sort()
for Router in Routers:
if Router == "Router1":
RouterInst = basicConfiguration.switchToRouter(self.device,Router)
for i in range(1,self.NumberOfDevices):
NDUT = 'Router' + str(i+1)
Link = "Link_Router1_"+ NDUT
PeerInterface = topodata["Link_details"][Link][NDUT]
IPAddress = topodata["Device_details"][NDUT][PeerInterface]
basicConfiguration.ping(RouterInst,IPAddress)
else:
RouterInst = basicConfiguration.switchToRouter(self.device,Router)
NDUT = 'Router1'
Link = "Link_Router1_" + Router
PeerInterface = topodata["Link_details"][Link][NDUT]
IPAddress = topodata["Device_details"][NDUT][PeerInterface]
basicConfiguration.ping(RouterInst,IPAddress)
logToFile.info('Ping Test successful on all the devices')
return
def setInterfaceUp(device,RouterPid,intfList): #Brings the interfaces up
#flushBuffer(1,device)
j = 0
i = 1
maxiter = len(intfList)
while j != maxiter:
if j % 2 == 0:
flushBuffer(1,device)
cmd = """sudo ip link set %s netns %s
sudo ip netns exec %s ip link set %s up""" %(intfList[j],RouterPid[0],RouterPid[0],intfList[j])
device.sendline(cmd)
device.expect(['w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logToFile.info(' Interface %s of Router1 UP',intfList[j])
logger.info(device.before,also_console=True)
j = j+1
else:
flushBuffer(1,device)
cmd = """sudo ip link set %s netns %s
sudo ip netns exec %s ip link set %s up""" %(intfList[j],RouterPid[i],RouterPid[i],intfList[j])
device.sendline(cmd)
device.expect(['w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logToFile.info(' Interface %s of Router%d UP',intfList[j],i+1)
logger.info(device.before,also_console=True)
j = j+1
i = i+1
return
def getIPaddressList(self,network_list,intflist): #Gets the list of IP addresses from the pool of available IPs in a given network,that should be alloted to devices
logToFile.info("Getting the IP address List")
IPaddressList = []
for i in network_list:
IPaddressList = basicConfiguration.getIPaddList(unicode(i),IPaddressList)
logToFile.info(' IP address list that can be allocated to %s interfaces is %s respectively',intflist,IPaddressList)
return IPaddressList
def buildNetworkTopology(self): #Builds Network Topology i:e instantiate devices(docker containers),load containers with latest flexswitch image,addlinks and set interfaces UP
print "In build network"
TopologyType = self.data['TopologyType']
image = self.data["flexswitchImage"]
logToFile.info('Building Network Topology')
TopologyDetails = buildNetwork(TopologyType,image)
logToFile.info(' Network Topology of type %s is built with %d devices having %s as interfaces of devices and populated with %s networks' ,TopologyType,self.NumberOfDevices,TopologyDetails["Interfaceslist"],TopologyDetails["Nwlist"])
return TopologyDetails
def enableBGPGlobal(self, Device): #Enables BGP global
logToFile.info(" Enabling BGP Global")
data = getData('ProtocolSpecific.json')
RouterID = data['BGP_Parameters'][Device]['RouterID']
AS = data['BGP_Parameters'][Device]['ASNum']
RouterInst = BGPConfiguration.switchToRouter(self.device, Device)
RouterInst = BGPConfiguration.BGPglobal(RouterInst, AS, RouterID)
return RouterInst
def setPeersDetails(
self
): #Determines the directly connected neighbors(peers) and update the related information about the peer to protocol specific JSON file
for i in range(0, (self.NumberOfDevices)):
Router = 'Router%d' % (i + 1)
BGPdata = BGPConfiguration.setPeerDetails(Router)
logToFile.info(
" ProtocolSpecific.json file is updated with all the BGP parameters for all the devices"
)
logToFile.info(" Protocol Specific JSON is as shown below \n %s",
BGPdata)
return
def checkBGPNeighbors(self, Router): #Check if BGP neighbors are learnt
data = getData('ProtocolSpecific.json')
if (isinstance(Router, list)):
for i in Router:
logToFile.info("Checking if BGP neighbors are set in %s", i)
RouterInst = switchToRouter(self.device, i)
RouterInst = BGPConfiguration.checkAllBGPNeighbors(RouterInst)
RouterInst = BGPConfiguration.checkIPV4Route(RouterInst)
RouterInst.sendline('exit')
logToFile.info("Verification of BGP Neighbors done in %s", i)
elif Router == 'all':
for i in data['BGP_Parameters'].keys():
logToFile.info("Checking if BGP neighbors are set in %s", i)
RouterInst = BGPConfiguration.switchToRouter(self.device, i)
RouterInst = BGPConfiguration.checkAllBGPNeighbors(RouterInst)
RouterInst = BGPConfiguration.checkIPV4Route(RouterInst)
#RouterInst = BGPConfiguration.checkBGPRoute(RouterInst)
RouterInst.sendline('exit')
logToFile.info("Verification of BGP neighbors done in %s", i)
return
def addLinks(device,intfList): #Adds Links between devices
flushBuffer(1,device)
i = 0 ; j = 2
maxiter = len(intfList)
while i != maxiter:
cmd = """sudo ip link add %s type veth peer name %s""" %(intfList[i],intfList[i+1])
device.sendline(cmd)
device.expect(['w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=8)
logger.info(device.before,also_console=True)
logToFile.info(" link Router1(%s)-----------------------------%s(Router%d)",intfList[i],intfList[i+1],j)
i = i + 2
j = j + 1
return
def preSetup(image):
data = getData('variable.json') #Get the json data from file "variable.json"
NumberOfDevices = data["NumberOfDevices"]
device = pexpect.spawn("/bin/bash") #Spawn the process ("/bin/bash")- Terminal
logToFile.info(" Pulling the flexswitch base image")
device.expect(['/$',pexpect.EOF,pexpect.TIMEOUT],timeout=1)
cmd = "sudo docker pull %s" %(image)
device.sendline(cmd) #Pull the flexswitch image from docker hub
device.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=2)
device.expect(['/$',pexpect.EOF,pexpect.TIMEOUT],timeout=2)
logToFile.info(" Creating directory for storing network namespace")
device.sendline("mkdir -m 777 -p /var/run/netns") #Create a directory
device.expect(['netns',pexpect.EOF,pexpect.TIMEOUT],timeout=2)
logger.info(device.before,also_console=True)
return device
def checkInterface(RouterInst,Interface,IPaddress): #Checks if interfaces are UP
flushBuffer(1,RouterInst)
RouterInst.sendcontrol('m')
RouterInst.sendline("ifconfig")
RouterInst.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=1)
logger.info(RouterInst.before,also_console=True)
output = RouterInst.before
ip = "inet addr:%s" %(IPaddress)
status = re.search(Interface,output)
con = re.search(ip,output)
if (status and con):
return
else:
logToFile.info("Interface %s not UP",Interface)
raise RuntimeError("Some error : Interface is not UP")
def setTopologyFile(self,intfList,IPaddressList): #Adds all the topology reated details to a file called Topology.json
logToFile.info("Setting up the topology file")
Network = self.data["Network"]
subnet = Network.split("/")
DATA = {}
DATA.update({"Device_details" : {}})
for i in range(1,(self.NumberOfDevices+1)):
Router = "Router"+str(i)
DATA["Device_details"].update({Router : {}})
j = 0 ; i = 2
maxiter = len(intfList)
while j != maxiter:
if j % 2 == 0:
DATA["Device_details"]["Router1"].update({intfList[j] : IPaddressList[j] + '/'+ subnet[1]})
j = j + 1
else:
Router = "Router" + str(i)
DATA["Device_details"][Router].update({intfList[j] : IPaddressList[j] + '/' + subnet[1]})
j = j + 1
i = i + 1
putData(DATA,'Topology.json')
DATA.update({'Link_details' : {}})
for i in range(1,(self.NumberOfDevices)):
DATA['Link_details'].update({"Link_Router1_Router" + str(i+1) : {}})
putData(DATA,'Topology.json')
links = DATA["Link_details"].keys()
links.sort()
m = 0 ; n = 1
for i in links:
DATA['Link_details'][i].update({"Router1" : intfList[m],"Router"+str(n+1) : intfList[m+1]})
m = m+2
n = n+1
putData(DATA,'Topology.json')
logToFile.info(' Topology file is updated with below device details \n %s',DATA)
return
def setBGPParameters(
self
): #Adds prerequisite BGP related parameters of all the devices to a file caleed Protocol Specific JSON file
logToFile.info(
" Setting up the ProtocolSpecific.json file with BGP related Parameters"
)
DATA = {}
DATA.update({'BGP_Parameters': {}})
RouterIDList = BGPConfiguration.getRouterIDList()
ASNumList = BGPConfiguration.getASNumList(self.AS)
for i in range(0, (self.NumberOfDevices)):
Router = 'Router%d' % (i + 1)
DATA['BGP_Parameters'].update(
{Router: {
'RouterID': RouterIDList[i],
'ASNum': ASNumList[i]
}})
putData(DATA, 'ProtocolSpecific.json')
return
def ping(RouterInst,IPAddress): #Performs ping test to verify configuration of IP address on interfaces
IP = IPAddress.split('/')
flushBuffer(1,RouterInst)
RouterInst.sendcontrol('m')
RouterInst.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
cmd = "ping -c 3 %s" %(IP[0])
RouterInst.sendline(cmd)
RouterInst.sendcontrol('m')
RouterInst.expect(['min/avg/max/mdev',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
output = RouterInst.before
logger.info(RouterInst.before,also_console=True)
if re.search("0% packet loss",output):
logToFile.info("Ping Success: Device Reachable")
else:
logToFile.debug("Device Unreachable : Check IP address Configuration")
raise RuntimeError("Error : Device Unreachable")
return
def configureIPaddress(self): #Configures IP address
data = getData('Topology.json')
Devices = data['Device_details']
Routers = Devices.keys()
Routers.sort()
for Router in Routers:
logToFile.info('Configuring ip address on Device %s',Router)
RouterInst = basicConfiguration.switchToRouter(self.device,Router)
RouterInst = basicConfiguration.preliminaryInstalls(RouterInst)
#RouterInst = basicConfiguration.boot(RouterInst)
interfaces = Devices[Router].keys()
interfaces.sort()
for intf in interfaces:
interface = intf
ipadd = Devices[Router][intf]
RouterInst = basicConfiguration.configureIP(RouterInst,interface,ipadd)
logToFile.info(' IP address for %s interface of device %s is configured',interface,Router)
RouterInst.sendline('exit')
logToFile.info('IP address configured on all of the interfaces in %s',Router)
return
def outputCheck(RouterInst, var, output): #Interprets output
if var == 'BGPglobal':
if re.search('\"Result\"\:\"Success\"', output):
logToFile.info("Global BGP Configuration Done")
elif re.search('\"Result\"\:\"Error\: Nothing to be updated\.\"',
output):
logToFile.info("Global BGP already configured")
elif var == 'createBGPV4Neighbor':
if re.search('\"Result\"\:\"Success\"', output):
logToFile.info("BGP Neighbor configuration done")
elif re.search('\"Result\"\:\"Error\: Nothing to be updated\.\"',
output):
logToFile.info("BGP Neighbor already configured")
elif var == 'checkAllBGPNeighbors':
if re.search('\"ObjectId\":\s[\d|\w|\-|\"]+', output):
logToFile.info("Verification-BGP Neighbors----PASS")
else:
logToFile.info("BGP Neighbors not configured properly")
elif var == 'checkIPV4Route':
if re.search('\"ObjectId\":\s[\d|\w|\-|\"]+', output):
logToFile.info(
"Verification-BGP Neighbors : Checking IPV4 route----PASS")
else:
logToFile.info("BGP Neighbors not configured properly")
elif var == 'checkBGPRoute':
if re.search('\"ObjectId\":\s[\d|\w|\-|\"]+', output):
logToFile.info(
"Verification-BGP Neighbors : Checking BGP route table----PASS"
)
else:
logToFile.info("BGP Neighbors not configured properly")
def bootUpDevices(self): #Boots all instantiated network devices
logToFile.info("Booting up all the devices")
basicConfiguration.boot(self.device)
logToFile.info('All the %d network devices booted',self.NumberOfDevices)
return
def buildNetwork(TopologyType,image):
RouterPid = []
data = getData('variable.json')
NumberOfDevices = data["NumberOfDevices"]
logToFile.info(" Setting up the pre-requisite environment")
device = Topology.preSetup(image)
logToFile.info(" Setting up the nodes of the network")
for i in range(0,NumberOfDevices):
NodeID = Topology.createNodes(i,device)
count = 3
while count >= 0:
if NodeID:
logToFile.info(" NODE CREATED(Router%d)",i+1)
RouterPid.append(NodeID.group(1))
cmd = """ln -s /proc/%s/ns/net /var/run/netns/%s""" %(RouterPid[i],RouterPid[i])
device.sendline(cmd)
device.expect(['/d+',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logger.info(device.before,also_console=True)
break
else:
cmd = "sudo docker rm -f Router%d" %(i+1)
device.sendline(cmd)
NodeID = Topology.createNodes(i,device)
count = count - 1
if count == -1:
logToFile.debug("Unable to instantiate container for node creation")
raise RuntimeError("Some error : Unable to instantiate docker container for Router")
else:
continue
logToFile.info(" Adding links between routers")
if TopologyType == 'Star':
NumberOfInterfaces = (2 * NumberOfDevices) - 2
NumberOfNetworks = NumberOfDevices - 1
intfList = []
nwList = []
for i in range(1,(NumberOfInterfaces+1)):
intfList.append('eth' + str(i))
for i in range(0,(NumberOfNetworks+1)):
nwStart = data["Network"]
nw = nwStart.split('/')
nwOctets = nw[0].split('.')
nwList.append(nwOctets[0] + '.' + nwOctets[1] + '.' + str(i+1) + '.' + nwOctets[3]+ '/' + nw[1])
Topology.addLinks(device,intfList)
logToFile.info(" Setting the interfaces UP")
Topology.setInterfaceUp(device,RouterPid,intfList)
TopoDet = {}
TopoDet.update({'Interfaceslist' : intfList, 'Nwlist': nwList})
return TopoDet
def outputCheck(RouterInst,Interface,IP_address,config): #Interprets Output
li = IP_address.split('/')
count = 3
RouterInst.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logger.info(RouterInst.before,also_console=True)
output = RouterInst.before
while count >= 0:
if re.search('\"Result\"\:\"Success\"',output):
checkInterface(RouterInst,Interface,li[0])
break
elif re.search('Failed to connect to localhost port 8080',output):
logger.info("*** ERROR:Failed to connect to localhost port 8080 ***",also_console=True)
logger.info( '*** Flexswitch not started properly : Please restart the flexswitch ***',also_console=True)
restartSwitch(RouterInst)
RouterInst = executeCmd(RouterInst,config)
RouterInst.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logger.info(RouterInst.before,also_console=True)
output = RouterInst.before
count = count - 1
if count == -1:
logToFile.debug("Error: Unable to start the flexswitch")
raise RuntimeError("Some error : Unable to start the Flexswitch")
else:
continue
elif re.search('System not ready',output):
logger.info("*** ERROR:System not ready,Daemons still restarting ***",also_console=True)
time.sleep(20)
RouterInst = executeCmd(RouterInst,config)
RouterInst.expect(['/w+@.*/#',pexpect.EOF,pexpect.TIMEOUT],timeout=3)
logger.info(RouterInst.before,also_console=True)
output = RouterInst.before
count = count - 1
if count == -1:
logToFile.debug("Error: Unable to start the flexswitch")
raise RuntimeError("Some error : Unable to start the Flexswitch")
else:
continue
elif re.search("Invalid interface reference provided in ip intf config object", output):
logToFile.debug("Invalid interface reference provided in ip intf config object")
raise RuntimeError("Error : Interface reference provided, is incorrect(Check interface is up for that particular device)")
elif re.search("ip address validation failed",output):
logToFile.debug("ip address validation failed")
raise RuntimeError("Error : IP address not specified correctly")
elif re.search('\"Result\"\:\"Error\: Already configured\.',output):
logToFile.info("IP address already configured")
break
elif re.search('curl : command not found',output):
preliminaryInstalls(RouterInst)
count = count -1
if count == -1:
logToFile.debug("Unable to install CURL : Check the internet connection")
raise RuntimeError("Some error : Unable to install curl")
else:
continue
return
def createBGPNeighbor(self, Router): #Creates BGP Neighbor
data = getData('ProtocolSpecific.json')
if (isinstance(Router, list)):
for i in Router:
logToFile.info("Configuring BGP in %s", i)
RouterInst = self.enableBGPGlobal(i)
Peers = data["BGP_Parameters"][i]['PeerDetails']
logToFile.info(" Setting up the neighbors")
for peer in Peers.keys():
PeerAS = data["BGP_Parameters"][i]['PeerDetails'][peer][
'ASNum']
PeerAddress = data["BGP_Parameters"][i]['PeerDetails'][
peer]['IP_Address']
PeerInterface = data["BGP_Parameters"][i]['PeerDetails'][
peer]['Interface']
RouterInst = BGPConfiguration.createBGPV4Neighbor(
RouterInst, PeerAS, PeerAddress, PeerInterface)
RouterInst.sendline('exit')
logToFile.info("BGP configuration donein %s", i)
elif Router == 'all':
Routers = data['BGP_Parameters'].keys()
Routers.sort()
for Router in Routers:
logToFile.info("Configuring BGP in %s", Router)
self.device.expect(['/w+@.*/#', pexpect.EOF, pexpect.TIMEOUT],
timeout=3)
RouterInst = self.enableBGPGlobal(str(Router))
Peers = data["BGP_Parameters"][str(Router)]['PeerDetails']
logToFile.info(" Setting up the neighbors")
for peer in Peers.keys():
PeerAS = str(data["BGP_Parameters"][str(Router)]
['PeerDetails'][str(peer)]['ASNum'])
PeerAddress = str(data["BGP_Parameters"][str(Router)]
['PeerDetails'][str(peer)]['IP_Address'])
PeerInterface = str(data["BGP_Parameters"][str(
Router)]['PeerDetails'][str(peer)]['Interface'])
NeighborAddress = PeerAddress.split('/')
RouterInst = BGPConfiguration.createBGPV4Neighbor(
RouterInst, PeerAS, NeighborAddress[0], PeerInterface)
RouterInst.sendline('exit')
logToFile.info("BGP configuration done in %s", Router)
return
