def pre_proccess(raw_Data):
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.sn) #---解密POST数据
else:
rawData = raw_Data
return rawData
def pre_proccess(raw_Data):
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.sn)#---解密POST数据
else:
rawData = raw_Data
return rawData
def cdata_post(request, device):
'''
处理设备的POST请求
涉及http参数: "raw_post_data"、stamp_name
'''
raw_Data = request.raw_post_data
if not raw_Data:
raw_Data = request.META['raw_post_data']
logger.error(raw_Data) #---把post数据记录到日志
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.sn)#---解密POST数据
else:
rawData = raw_Data
######################### 新加入的请求 api 接口区 ######################
#
#
# 在此 return 返回给设备的数据
#
#
########################## 新加入的请求 api 接口区 ######################
#---时间戳及其他POST数据的整理
stamp=None
for s in STAMPS:
stamp=request.REQUEST.get(s, None)
if not (stamp is None):
stamp_name=STAMPS[s]
break
if stamp is None:
return "UNKNOWN"
msg=None
if stamp_name=='FPImage':
head_data=":%s: SN=%s\tIP=%s\tTIME=%s\tPIN=%s\tFID=%s\tFPImage=%s"%(stamp_name, str(device.sn).strip(),
request.META["REMOTE_ADDR"], datetime.datetime.now(),
request.REQUEST["PIN"], request.REQUEST.get("FID",0), request.REQUEST['FPImage'])
else:
head_data=":%s: SN=%s\tIP=%s\tTIME=%s"%(stamp_name, str(device.sn).strip(),
request.META["REMOTE_ADDR"], datetime.datetime.now())
try:
s_data="%s\n%s\n\n"%(head_data, rawData)
except:
s_data="%s\n%s\n\n"%(head_data, rawData)
#---将命令类型头基本信息和POST数据的保存到文件缓存队列
if settings.WRITEDATA_CONNECTION>0:
#----写入到队列，后台进程在进行实际的数据库写入操作
try:
obj=""
try:
from mysite.iclock.models.model_cmmdata import gen_device_cmmdata
obj=gen_device_cmmdata(device,s_data) #---将整理后的POST数据保存到文件
except Exception, e:
raise
except Exception, e:
import traceback; traceback.print_exc()
raise
c=1
def devpost(request):
'''
http://xxx/devicecmd
设备返回设备命令执行结果的请求
'''
from commen_utils import parse_posts
network_monitor(request)
device = check_device(request) #---检测、验证当前发出请求的设备
if device is None:
return unknown_device_response()
else:
if request.method == 'GET':
pass
elif request.method == 'POST':
try:
rd = request.raw_post_data
if settings.ENCRYPT: #---解密
try:
import lzo
rawData = lzo.bufferDecrypt(rd, device.sn)
except:
rawData = rd
else:
rawData = rd
try:
data0 = rawData.decode("gb18030") #---解码
except:
data0 = rawData
rets = {}
pdata = parse_posts(data0) #---解析,结果为字典的数组
for apost in pdata: #[CMD,ID,Return]
id = int(apost["ID"]) # 命令ID
ret = apost["Return"] #命令执行返回值
if apost["CMD"] == "INFO":#更新设备信息
parse_dev_info(device, apost['Content'])
device.save()
rets[id] = ret
elif (apost["CMD"] == "GetFile" or apost["CMD"] == "Shell") and ret > 0:
check_upload_file(request, apost)
rets[id] = ret
elif apost["CMD"] == "VERIFY SUM" and ret > 0: #考勤校对
check_att_sum(apost,device)
rets[id] = ret
elif apost["CMD"] == "PutFile":
check_upgradefile(id,apost,device,ret)
post_check_update(device,[ret]) #立即单独更新此处理的开始指针
#rets[id] = ret
else:#默认情况下CMD为DATA
rets[id] = ret
if len(rets) > 0:
update_cmds(device, rets)
return device_response_write("OK")
except:
device_response_write("")
else:
return unknown_data_response(device)
def devpost(request):
'''
设备返回命令执行结果的请求
'''
response = device_response()
resp = ""
device = check_device(request)
if device is None:
response.write("UNKNOWN DEVICE")
return response
try:
rd = request.raw_post_data
if settings.ENCRYPT: #---解密
try:
import lzo
rawData = lzo.bufferDecrypt(rd, device.sn)
except:
rawData = rd
else:
rawData = rd
try:
data0 = rawData.decode("gb18030") #---解码
except:
data0 = rawData
rets = {}
pdata = parse_posts(data0) #---解析,结果为字典的数组
for apost in pdata:
id = int(apost["ID"]) #---【字段】命令ID
ret = apost["Return"] #---【字段】命令执行结果
if apost["CMD"] == "INFO": #--- 【字段】命令类别
parse_dev_info(device, apost['Content'])
rets[id] = ret
elif apost['CMD'] == 'PutFile' and ret > 100 * 1024: #可能是固件升级命令
cmdobj = update_cmd(device, id, ret)
if cmdobj: check_upgrade_fw(device, cmdobj, request)
elif (apost["CMD"] == "GetFile"
or apost["CMD"] == "Shell") and ret > 0:
check_upload_file(request, apost)
rets[id] = ret
else:
rets[id] = ret
if len(rets) > 0:
update_cmds(device, rets)
resp += "OK"
#check_and_save_cache(device)
device.save()
except:
errorLog(request)
response["Content-Length"] = len(resp)
response.write(resp)
return response
def devpost(request):
response = HttpResponse(mimetype='text/plain')
resp = ''
device = checkDevice(request, response)
if device == None:
return response
try:
rd = request.raw_post_data
if settings.ENCRYPT:
try:
import lzo
rawData = lzo.bufferDecrypt(rd, device.SN)
except:
rawData = rd
else:
rawData = rd
try:
data0 = rawData.decode('gb18030')
except:
data0 = rawData
else:
rets = {}
InfoLines = []
pdata = parsePosts(data0)
for apost in pdata:
id = int(apost['ID'])
ret = apost['Return']
if apost['CMD'] == 'INFO':
saveDevInfo(device, apost['Content'])
rets[id] = ret
elif apost['CMD'] == 'PutFile' and ret > 102400:
cmdobj = updateCmd(id, ret)
if cmdobj:
checkUpgradeFW(cmdobj, request)
elif (apost['CMD'] == 'GetFile' or apost['CMD'] == 'Shell') and ret > 0:
checkUpLoadFile(request, apost)
rets[id] = ret
else:
rets[id] = ret
if len(rets) > 0:
updateCmds(rets)
resp += 'OK'
checkAndSave(device)
try:
nocmd_device = cache.get('nocmd_device')
if nocmd_device:
nocmd_device.remove(device.SN)
cache.set('nocmd_device', nocmd_device)
except:
pass
except Exception, e:
errorLog(request)
def devpost(request):
'''
设备返回命令执行结果的请求
'''
response = device_response()
resp = ""
device = check_device(request)
if device is None:
response.write("UNKNOWN DEVICE")
return response
try:
rd = request.raw_post_data
if settings.ENCRYPT: #---解密
try:
import lzo
rawData = lzo.bufferDecrypt(rd, device.sn)
except:
rawData = rd
else:
rawData = rd
try:
data0 = rawData.decode("gb18030") #---解码
except:
data0 = rawData
rets = {}
pdata = parse_posts(data0) #---解析,结果为字典的数组
for apost in pdata:
id = int(apost["ID"]) #---【字段】命令ID
ret = apost["Return"] #---【字段】命令执行结果
if apost["CMD"] == "INFO":#--- 【字段】命令类别
parse_dev_info(device, apost['Content'])
rets[id] = ret
elif apost['CMD'] == 'PutFile' and ret > 100 * 1024: #可能是固件升级命令
cmdobj = update_cmd(device, id, ret)
if cmdobj: check_upgrade_fw(device, cmdobj, request)
elif (apost["CMD"] == "GetFile" or apost["CMD"] == "Shell") and ret > 0:
check_upload_file(request, apost)
rets[id] = ret
else:
rets[id] = ret
if len(rets) > 0:
update_cmds(device, rets)
resp += "OK"
#check_and_save_cache(device)
device.save()
except:
errorLog(request)
response["Content-Length"] = len(resp)
response.write(resp)
return response
def devpost(request):
response = HttpResponse(mimetype='text/plain')
resp = ""
device = checkDevice(request, response)
if(device == None): return response
try:
rd = request.raw_post_data
if settings.ENCRYPT:
try:
import lzo
rawData = lzo.bufferDecrypt(rd, device.SN)
except:
rawData = rd
else:
rawData = rd
try:
data0 = rawData.decode("gb18030")
except:
data0 = rawData
rets = {}
InfoLines = []
pdata = parsePosts(data0)
# appendFile("%s"%pdata)
for apost in pdata:
id = int(apost["ID"])
ret = apost["Return"]
if apost["CMD"] == "INFO":
saveDevInfo(device, apost['Content'])
rets[id] = ret
elif apost['CMD'] == 'PutFile' and ret > 100 * 1024:
cmdobj = updateCmd(id, ret)
if cmdobj: checkUpgradeFW(cmdobj, request)
elif (apost["CMD"] == "GetFile" or apost["CMD"] == "Shell") and ret > 0:
checkUpLoadFile(request, apost)
rets[id] = ret
else:
rets[id] = ret
if len(rets) > 0:
updateCmds(rets)
resp += "OK"
checkAndSave(device)
try:
nocmd_device = cache.get("nocmd_device")
if nocmd_device:
nocmd_device.remove(device.SN)
cache.set("nocmd_device", nocmd_device)
except: pass
except Exception, e:
errorLog(request)
def acc_cdata_post(request, device, d_server=None):
from mysite import settings
from mysite.iclock.devview import STAMPS
raw_Data = request.raw_post_data
#print "raw_Data:%s"%raw_Data
#print request.META.items()
if not raw_Data:
raw_Data = request.META['raw_post_data']
#print settings.ENCRYPT
#logger.error(raw_Data)
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.sn)
else:
rawData = raw_Data
#print '---raw_Data=',raw_Data
stamp=None
for s in STAMPS:
stamp=request.REQUEST.get(s, None)
if not (stamp is None):
stamp_name=STAMPS[s]
break
# print stamp_name,'======stamp_name'
if stamp is None:
return "UNKNOWN"
msg=None
if stamp_name == 'log_stamp':
c, ec, msg = cdata_post_acc_trans_state(device, rawData, d_server)
else:
c = 0
#push下发开关门命令---darcy20110803
try:
c = d_server.pop_from_dict("GLOBAL_APB_CMD_%s"%device.sn) or ""
except Exception, e:
from traceback import print_exc
print_exc()
printf('------send push e=%d'%e, True)
def cdata(request):
encrypt = 1
response = HttpResponse(mimetype='text/plain')
getResp = ""
try:
cursor = conn.cursor()
resp = ""
device = checkDevice(request, response)
if(device == None): return response
if request.REQUEST.has_key('action'):
resp += "OK\n"
elif request.method == 'GET':
if request.REQUEST.has_key('PIN'):
save = request.REQUEST.has_key('save') and (request.REQUEST['save'] in ['1', 'Y', 'y', 'yes', 'YES']) or False
try:
pin = request.REQUEST['PIN']
emp = employee.objects.get(PIN=formatPIN(pin))
except ObjectDoesNotExist:
resp += "NONE"
else:
cc = u"DATA UPDATE USERINFO PIN=%s\tName=%s\tPasswd=%s\tGrp=%d\tCard=%s\tTZ=%s\tPri=%s\n" % (emp.pin(), emp.EName or "", emp.Password or "", emp.AccGroup or 1, getNormalCard(emp.Card), emp.TimeZones or "", save and emp.Privilege or 0)
for fp in fptemp.objects.filter(UserID=emp):
try:
#cc+=u"DATA FP PIN=%s\tFID=%d\tTMP=%s\n"%(emp.pin(), fp.FingerID, fp.temp())
cc += u"DATA UPDATE FINGERTMP PIN=%s\tFID=%d\tSize=%s\tTMP=%s\n" % (emp.pin(), fp.FingerID, len(fp.temp()), fp.temp()) #by super 2010-07-24
except:pass
try:
resp += cc.encode("gb18030")
except:
resp += cc.decode("utf-8").encode("gb18030")
if not save: # if not saved user in device, delete it after serveral(5) minutes
endTime = datetime.datetime.now() + datetime.timedelta(0, 5 * 60)
appendDevCmd(device, "DATA DELETE USERINFO PIN=%s" % emp.pin(), cursor, endTime)
else:
#by super 2010-08-25 协议向下兼容
pushverValue = None
if request.REQUEST.has_key('pushver'):
pushverValue = request.REQUEST['pushver']
attlogStamp = "Stamp"
operlogStamp = "OpStamp"
attphotoStamp = "PhotoStamp"
TransFlag = "0000000000"
if pushverValue :#新协议
attlogStamp = "ATTLOGStamp"
operlogStamp = "OPERLOGStamp"
attphotoStamp = "ATTPHOTOStamp"
#TransFlag = device.UpdateDB.replace("\\t", "\t")
TransFlag = "1111000000"
resp += "GET OPTION FROM: %s\n" % device.SN
#resp+="Stamp=%s\n"%device.LogStamp
#resp+="OpStamp=%s\n"%(device.OpLogStamp or 0)
#resp+="PhotoStamp=%s\n"%(device.PhotoStamp or 0)
# resp+="ATTLOGStamp=%s\n"%device.LogStamp
# resp+="OPERLOGStamp=%s\n"%(device.OpLogStamp or 0)
# resp+="ATTPHOTOStamp=%s\n"%(device.PhotoStamp or 0)
resp += "%s=%s\n" % (attlogStamp, device.LogStamp)
resp += "%s=%s\n" % (operlogStamp, device.OpLogStamp or 0)
resp += "%s=%s\n" % (attphotoStamp, device.PhotoStamp or 0)
resp += "ErrorDelay=%d\n" % max(30, settings.MIN_REQ_DELAY)
resp += "Delay=%d\n" % settings.MIN_REQ_DELAY
resp += "TransTimes=%s\n" % device.TransTimes
resp += "TransInterval=%d\n" % max(settings.MIN_TRANSINTERVAL, device.TransInterval)
resp += "TransFlag=%s\n" % device.UpdateDB.replace("\\t", "\t")
#resp += "TransFlag=%s\n" % TransFlag#device.UpdateDB.replace("\\t","\t") #by super 2010-07-30
try:
if not (device.TZAdj == None):
resp += "TimeZone=%s\n" % device.TZAdj
except:
pass
resp += "Realtime=%s\n" % settings.TRANS_REALTIME
resp += "Encrypt=%s\n" % settings.ENCRYPT
if pushverValue :
resp += "ServerVer=0.0.2 2010-07-22\n" #2010-09-17 新版本才有服务版本信息和表明时间戳
resp += "TableNameStamp\n\n"
encrypt = 0
checkAndSave(device)
elif request.method == 'POST':
raw_Data = request.raw_post_data
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.SN)
else:
rawData = raw_Data
#by super 2010-08-16 将下发的用户信息保存到记事本
now = datetime.datetime.now()
filepath = os.path.abspath(os.path.dirname(sys.argv[0]))
old_file = "%s\\read\\%s_%s" % (tmpDir(), device.SN, now.strftime("%y%m%dT%H%M%S"))
#考勤
if request.REQUEST.has_key('Stamp'): #and request.REQUEST.has_key('table'):
if request.REQUEST.has_key('table'): #新协议
if request.REQUEST['table'] == 'ATTLOG':#by super 2010-07-22 上传考勤记录
s_data = ":TRANSACTIONS: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
real_ip(request),
datetime.datetime.now(),
rawData)
#写入到队列，后台进程在进行实际的数据库写入操作
try:
write_to_file(old_file, s_data.encode("utf-8"))
#q_server=queqe_server()
#q_server.lpush("TRANS", s_data)
#q_server.connection.disconnect()
except Exception, e:
appendFile(e)
resp += u"ERROR:%s\n" % e
print u"ERROR:%s\n" % e
raise e
else:
device.LogStamp = request.REQUEST['Stamp']
resp += "OK:%d\n" % 1
elif request.REQUEST['table'] == 'OPERLOG':#by super 2010-07-22 上传用户信息和系统日志
try:
try:
rawData.decode("ascii")
except:
rawData=rawData.decode("gb18030")
s_data = u":OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
real_ip(request),
datetime.datetime.now(),
rawData)
except Exception, e:
appendFile("--%s--%s" % (now, e))
raise e
#s_data = u":OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n" % (device.SN,
#real_ip(request),
#datetime.datetime.now(),
#rawData)
#写入到队列，后台进程在进行实际的数据库写入操作
try:
write_to_file(old_file, s_data.encode("utf-8"))
print 'success to write file'
#q_server=queqe_server()
#q_server.lpush("TRANsS", s_data.encode("utf-8"))
#q_server.connection.disconnect()
except Exception, e:
resp += u"ERROR:%s\n" % e
appendFile(e)
errorLog(request)
raise e
else:
device.OpLogStamp = request.REQUEST['Stamp']
resp += "OK:%d\n" % 1
elif request.REQUEST['table'] == 'ATTPHOTO':#by super 2010-07-24 上传照片
return postPhoto(request)
else:
try:
if not (device.TZAdj == None):
resp += "TimeZone=%s\n" % device.TZAdj
except:
appendFile("---------Error:Device is null!----------")
resp += "Realtime=%s\n" % settings.TRANS_REALTIME
resp += "Encrypt=%s\n\n" % settings.ENCRYPT
encrypt = 0
checkAndSave(device)
elif request.method == 'POST':
# file("c:/postdata.txt", "a+").write("POST FROM: %s(%s)%s----------\n"%(request.META["REMOTE_ADDR"],request.META["PATH_INFO"],datetime.datetime.now()))
# file("c:/postdata_%s.txt"%(ccc), "a+").write(request.raw_post_data)
raw_Data = request.raw_post_data
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.SN)
else:
rawData = raw_Data
if request.REQUEST.has_key('Stamp') and request.REQUEST.has_key('table'):
if request.REQUEST['table'] == 'ATTLOG':#by super 2010-07-22 上传考勤记录
okc = 0;
errorLines = [] #发生保存错误的记录
cacheLines = [] #本次提交的行
errorLogs = [] #解析出错、不正确数据的行
sqls = []
commitLineCount = 700 #达到700行就提交一次
if settings.DATABASE_ENGINE == "ado_mssql": commitLineCount = 50
alog = None
for line in string.split(rawData, "\n"):
if line:
eMsg = ""
def cdata_post(request, device):
'''
处理设备的POST请求
涉及http参数: "raw_post_data"、stamp_name
'''
raw_Data = request.raw_post_data
if not raw_Data:
raw_Data = request.META['raw_post_data']
logger.error(raw_Data) #---把post数据记录到日志
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.sn) #---解密POST数据
else:
rawData = raw_Data
######################### 新加入的请求 api 接口区 ######################
#
#
# 在此 return 返回给设备的数据
#
#
########################## 新加入的请求 api 接口区 ######################
#---时间戳及其他POST数据的整理
stamp = None
for s in STAMPS:
stamp = request.REQUEST.get(s, None)
if not (stamp is None):
stamp_name = STAMPS[s]
break
if stamp is None:
return "UNKNOWN"
msg = None
if stamp_name == 'FPImage':
head_data = ":%s: SN=%s\tIP=%s\tTIME=%s\tPIN=%s\tFID=%s\tFPImage=%s" % (
stamp_name, str(device.sn).strip(), request.META["REMOTE_ADDR"],
datetime.datetime.now(), request.REQUEST["PIN"],
request.REQUEST.get("FID", 0), request.REQUEST['FPImage'])
else:
head_data = ":%s: SN=%s\tIP=%s\tTIME=%s" % (stamp_name, str(
device.sn).strip(), request.META["REMOTE_ADDR"],
datetime.datetime.now())
try:
s_data = "%s\n%s\n\n" % (head_data, rawData)
except:
s_data = "%s\n%s\n\n" % (head_data, rawData)
#---将命令类型头基本信息和POST数据的保存到文件缓存队列
if settings.WRITEDATA_CONNECTION > 0:
#----写入到队列，后台进程在进行实际的数据库写入操作
try:
obj = ""
try:
from mysite.iclock.models.model_cmmdata import gen_device_cmmdata
obj = gen_device_cmmdata(device, s_data) #---将整理后的POST数据保存到文件
except Exception, e:
raise
except Exception, e:
import traceback
traceback.print_exc()
raise
c = 1
def cdata(request):
encrypt = 1
response = HttpResponse(mimetype='text/plain')
getResp = ''
try:
cursor = conn.cursor()
resp = ''
device = checkDevice(request, response)
if device == None:
return response
if request.REQUEST.has_key('action'):
resp += 'OK\n'
if request.method == 'GET':
if request.REQUEST.has_key('PIN'):
save = request.REQUEST.has_key('save') and request.REQUEST['save'] in ('1',
'Y',
'y',
'yes',
'YES') or False
try:
pin = request.REQUEST['PIN']
emp = employee.objects.get(PIN=formatPIN(pin))
except ObjectDoesNotExist:
resp += 'NONE'
else:
cc = u'DATA UPDATE USERINFO PIN=%s\tName=%s\tPasswd=%s\tGrp=%d\tCard=%s\tTZ=%s\tPri=%s\n' % (
emp.pin(), emp.EName or '', emp.Password or '', emp.AccGroup or 1, getNormalCard(emp.Card),
emp.TimeZones or '', save and emp.Privilege or 0)
for fp in fptemp.objects.filter(UserID=emp):
try:
cc += u'DATA UPDATE FINGERTMP PIN=%s\tFID=%d\tSize=%s\tTMP=%s\n' % (
emp.pin(), fp.FingerID, len(fp.temp()), fp.temp())
except:
pass
try:
resp += cc.encode('gb18030')
except:
resp += cc.decode('utf-8').encode('gb18030')
else:
endTime = save or datetime.datetime.now() + datetime.timedelta(0, 300)
appendDevCmd(device, 'DATA DELETE USERINFO PIN=%s' % emp.pin(), cursor, endTime)
pushverValue = None
if request.REQUEST.has_key('pushver'):
pushverValue = request.REQUEST['pushver']
attlogStamp = 'Stamp'
operlogStamp = 'OpStamp'
attphotoStamp = 'PhotoStamp'
TransFlag = '0000000000'
if pushverValue:
attlogStamp = 'ATTLOGStamp'
operlogStamp = 'OPERLOGStamp'
attphotoStamp = 'ATTPHOTOStamp'
TransFlag = '1111000000'
resp += 'GET OPTION FROM: %s\n' % device.SN
resp += '%s=%s\n' % (attlogStamp, device.LogStamp)
resp += '%s=%s\n' % (operlogStamp, device.OpLogStamp or 0)
resp += '%s=%s\n' % (attphotoStamp, device.PhotoStamp or 0)
resp += 'ErrorDelay=%d\n' % max(30, settings.MIN_REQ_DELAY)
resp += 'Delay=%d\n' % settings.MIN_REQ_DELAY
resp += 'TransTimes=%s\n' % device.TransTimes
resp += 'TransInterval=%d\n' % max(settings.MIN_TRANSINTERVAL, device.TransInterval)
resp += 'TransFlag=%s\n' % device.UpdateDB.replace('\\t', '\t')
try:
if not device.TZAdj == None:
if device.TZAdj == 14:
resp += 'TimeZone=0\n'
else:
resp += 'TimeZone=%s\n' % device.TZAdj
except:
pass
else:
resp += 'Realtime=%s\n' % settings.TRANS_REALTIME
resp += 'Encrypt=%s\n' % settings.ENCRYPT
if pushverValue:
resp += 'ServerVer=0.0.2 2010-07-22\n'
resp += 'TableNameStamp\n\n'
encrypt = 0
checkAndSave(device)
else:
if request.method == 'POST':
raw_Data = request.raw_post_data
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.SN)
else:
rawData = raw_Data
now = datetime.datetime.now()
filepath = os.path.abspath(os.path.dirname(sys.argv[0]))
old_file = '%s\\read\\%s_%s' % (tmpDir(), device.SN, now.strftime('%y%m%dT%H%M%S'))
if request.REQUEST.has_key('Stamp') and request.REQUEST.has_key('table'):
if request.REQUEST['table'] == 'ATTLOG':
s_data = ':TRANSACTIONS: SN=%s\tIP=%s\tTIME=%s\n%s\n\n' % (device.SN,
real_ip(request),
datetime.datetime.now(),
rawData)
try:
write_to_file(old_file, s_data.encode('utf-8'))
except Exception, e:
appendFile(e)
resp += u'ERROR:%s\n' % e
print u'ERROR:%s\n' % e
raise e
else:
device.LogStamp = request.REQUEST['Stamp']
resp += 'OK:1\n'
elif request.REQUEST['table'] == 'OPERLOG':
try:
s_data = u':OPLOG: SN=%s\tIP=%s\tTIME=%s\n%s\n\n' % (device.SN,
real_ip(request),
datetime.datetime.now(),
decode_data(rawData))
except Exception, e:
appendFile('--%s--%s' % (now, e))
raise e
else:
try:
write_to_file(old_file, s_data.encode('utf-8'))
print 'success to write file'
except Exception, e:
resp += u'ERROR:%s\n' % e
appendFile(e)
errorLog(request)
raise e
else:
device.OpLogStamp = request.REQUEST['Stamp']
resp += 'OK:1\n'
elif request.REQUEST['table'] == 'ATTPHOTO':
return postPhoto(request)
else:
resp += 'TimeZone=%s\n' % device.TZAdj
except:
appendFile('---------Error:Device is null!----------')
else:
resp += 'Realtime=%s\n' % settings.TRANS_REALTIME
resp += 'Encrypt=%s\n\n' % settings.ENCRYPT
encrypt = 0
checkAndSave(device)
else:
if request.method == 'POST':
raw_Data = request.raw_post_data
if settings.ENCRYPT:
import lzo
rawData = lzo.bufferDecrypt(raw_Data, device.SN)
else:
rawData = raw_Data
if request.REQUEST.has_key('Stamp') and request.REQUEST.has_key('table') and request.REQUEST[
'table'] == 'ATTLOG':
okc = 0
errorLines = []
cacheLines = []
errorLogs = []
sqls = []
commitLineCount = 700
if settings.DATABASE_ENGINE == 'ado_mssql':
commitLineCount = 50
alog = None
for line in string.split(rawData, '\n'):
if line:
