def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [
cpu_class(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [
TimingSimpleCPU(defer_registration=True, cpu_id=(np + i))
for i in xrange(np)
]
switch_cpus_1 = [
DerivO3CPU(defer_registration=True, cpu_id=(2 * np + i))
for i in xrange(np)
]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i])
for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i])
for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(
testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a, b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Using Fault Injection Method"
print "1) Simulate with Detailed"
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "switchcpu":
print "2) DINOSRetutn Results with Atomic simple"
m5.changeToAtomic(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
print "Successfully resumed the system"
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
print "Fault Injection System stopped"
print "Exiting @ tick %i because %s" % (m5.curTick(),
exit_cause)
return
elif exit_cause == "fi_system_init":
print "Fi_system_init encountered"
return 1
else:
m5.drain(testsys)
print "Fault Injection System stopped"
print "Exiting @ tick %i because %s" % (m5.curTick(),
exit_cause)
return
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None:
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause()
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause()
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
np = options.num_cpus
max_checkpoints = options.max_checkpoints
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.standard_switch:
if not options.caches:
# O3 CPU must have a cache to work.
print "O3 CPU must be used with caches"
sys.exit(1)
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(np+i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(2*np+i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[0].clock
switch_cpus_1[i].clock = testsys.cpu[0].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
from os.path import isdir, exists
from os import listdir
import re
if not isdir(cptdir):
fatal("checkpoint dir %s does not exist!", cptdir)
if options.at_instruction or options.simpoint:
inst = options.checkpoint_restore
if options.simpoint:
# assume workload 0 has the simpoint
if testsys.cpu[0].workload[0].simpoint == 0:
fatal('Unable to find simpoint')
inst += int(testsys.cpu[0].workload[0].simpoint)
checkpoint_dir = joinpath(cptdir,
"cpt.%s.%s" % (options.bench, inst))
if not exists(checkpoint_dir):
fatal("Unable to find checkpoint directory %s", checkpoint_dir)
else:
dirs = listdir(cptdir)
expr = re.compile('cpt\.([0-9]*)')
cpts = []
for dir in dirs:
match = expr.match(dir)
if match:
cpts.append(match.group(1))
cpts.sort(lambda a,b: cmp(long(a), long(b)))
cpt_num = options.checkpoint_restore
if cpt_num > len(cpts):
fatal('Checkpoint %d not found', cpt_num)
## Adjust max tick based on our starting tick
maxtick = maxtick - int(cpts[cpt_num - 1])
checkpoint_dir = joinpath(cptdir, "cpt.%s" % cpts[cpt_num - 1])
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Using Fault Injection Method"
print "1) Simulate with Detailed"
exit_event = m5.simulate()
exit_cause = exit_event.getCause()
if exit_cause == "switchcpu":
print "2) DINOSRetutn Results with Atomic simple"
m5.changeToAtomic(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
print "Successfully resumed the system"
exit_event=m5.simulate()
exit_cause = exit_event.getCause()
print "Fault Injection System stopped"
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
return
elif exit_cause == "fi_system_init":
print "Fi_system_init encountered"
return 1
else:
m5.drain(testsys)
print "Fault Injection System stopped"
print "Exiting @ tick %i because %s" % (m5.curTick(), exit_cause)
return
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.warmup)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.drain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
num_checkpoints = 0
exit_cause = ''
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
if options.take_checkpoints != None :
if options.at_instruction or options.simpoint:
checkpoint_inst = int(options.take_checkpoints)
# maintain correct offset if we restored from some instruction
if options.checkpoint_restore != None:
checkpoint_inst += options.checkpoint_restore
print "Creating checkpoint at inst:%d" % (checkpoint_inst)
exit_event = m5.simulate()
print "exit cause = %s" % (exit_event.getCause())
# skip checkpoint instructions should they exist
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate()
if exit_event.getCause() == \
"a thread reached the max instruction count":
m5.checkpoint(joinpath(cptdir, "cpt.%s.%d" % \
(options.bench, checkpoint_inst)))
print "Checkpoint written."
num_checkpoints += 1
if exit_event.getCause() == "user interrupt received":
exit_cause = exit_event.getCause();
else:
when, period = options.take_checkpoints.split(",", 1)
when = int(when)
period = int(period)
exit_event = m5.simulate(when)
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(when - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
sim_ticks = when
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
while num_checkpoints < max_checkpoints and \
exit_event.getCause() == "simulate() limit reached":
if (sim_ticks + period) > maxtick:
exit_event = m5.simulate(maxtick - sim_ticks)
exit_cause = exit_event.getCause()
break
else:
exit_event = m5.simulate(period)
sim_ticks += period
while exit_event.getCause() == "checkpoint":
exit_event = m5.simulate(sim_ticks - m5.curTick())
if exit_event.getCause() == "simulate() limit reached":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if exit_event.getCause() != "simulate() limit reached":
exit_cause = exit_event.getCause();
else: # no checkpoints being taken via this script
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
exit_event = m5.simulate(maxtick)
while exit_event.getCause() == "checkpoint":
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
num_checkpoints += 1
if num_checkpoints == max_checkpoints:
exit_cause = "maximum %d checkpoints dropped" % max_checkpoints
break
exit_event = m5.simulate(maxtick - m5.curTick())
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if exit_cause == '':
exit_cause = exit_event.getCause()
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
def run(options, root, testsys, cpu_class):
if options.maxtick:
maxtick = options.maxtick
elif options.maxtime:
simtime = m5.ticks.seconds(simtime)
print "simulating for: ", simtime
maxtick = simtime
else:
maxtick = m5.MaxTick
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
if options.cpu_type == "arm_detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [O3_ARM_v7a_3(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "detailed":
if not options.caches:
print "O3 CPU must be used with caches"
sys.exit(1)
repeat_switch_cpus = [DerivO3CPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
elif options.cpu_type == "inorder":
print "inorder CPU switching not supported"
sys.exit(1)
elif options.cpu_type == "timing":
repeat_switch_cpus = [TimingSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
else:
repeat_switch_cpus = [AtomicSimpleCPU(defer_registration=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clock = testsys.cpu[i].clock
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
if cpu_class:
switch_cpus_1 = [cpu_class(defer_registration=True, cpu_id=(i)) for i in xrange(np)]
else:
switch_cpus_1 = [DerivO3CPU(defer_registration=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clock = testsys.cpu[i].clock
switch_cpus_1[i].clock = testsys.cpu[i].clock
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
else:
testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
checkpoint_dir = None
if options.checkpoint_restore != None:
maxtick, checkpoint_dir = findCptDir(options, maxtick, cptdir, testsys)
m5.instantiate(checkpoint_dir)
if options.standard_switch or cpu_class:
if options.standard_switch:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print "Switch at instruction count:%s" % \
str(testsys.cpu[0].max_insts_any_thread)
exit_event = m5.simulate()
else:
print "Switch at curTick count:%s" % str(10000)
exit_event = m5.simulate(10000)
print "Switched CPUS @ tick %s" % (m5.curTick())
# when you change to Timing (or Atomic), you halt the system
# given as argument. When you are finished with the system
# changes (including switchCpus), you must resume the system
# manually. You DON'T need to resume after just switching
# CPUs if you haven't changed anything on the system level.
if options.standard_switch:
m5.doDrain(testsys)
m5.changeToTiming(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
else:
m5.doDrain(testsys)
m5.changeToAtomic(testsys)
m5.switchCpus(switch_cpu_list)
m5.resume(testsys)
if options.standard_switch:
print "Switch at instruction count:%d" % \
(testsys.switch_cpus[0].max_insts_any_thread)
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print "Switching CPUS @ tick %s" % (m5.curTick())
print "Simulation ends instruction count:%d" % \
(testsys.switch_cpus_1[0].max_insts_any_thread)
m5.doDrain(testsys)
m5.switchCpus(switch_cpu_list1)
m5.resume(testsys)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if options.take_checkpoints and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None :
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_cause = scriptCheckpoints(options, maxtick, cptdir)
else:
if options.fast_forward:
m5.stats.reset()
print "**** REAL SIMULATION ****"
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_cause = repeatSwitch(testsys, repeat_switch_cpu_list,
maxtick, options.repeat_switch)
else:
exit_cause = benchCheckpoints(options, maxtick, cptdir)
print 'Exiting @ tick %i because %s' % (m5.curTick(), exit_cause)
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
