def PyExec(self):
config['default.facility'] = "SNS"
config['default.instrument'] = self._long_inst
self._doIndiv = self.getProperty("DoIndividual").value
self._etBins = self.getProperty(
"EnergyBins").value / MICROEV_TO_MILLIEV
self._qBins = self.getProperty("MomentumTransferBins").value
self._noMonNorm = self.getProperty("NoMonitorNorm").value
self._maskFile = self.getProperty("MaskFile").value
self._groupDetOpt = self.getProperty("GroupDetectors").value
self._normalizeToFirst = self.getProperty("NormalizeToFirst").value
self._normalizeToVanadium = self.getProperty("GroupDetectors").value
self._doNorm = self.getProperty("DivideByVanadium").value
datasearch = config["datasearch.searcharchive"]
if datasearch != "On":
config["datasearch.searcharchive"] = "On"
# Handle masking file override if necessary
self._overrideMask = bool(self._maskFile)
if not self._overrideMask:
config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
self._maskFile = DEFAULT_MASK_FILE
api.LoadMask(Instrument='BASIS',
OutputWorkspace='BASIS_MASK',
InputFile=self._maskFile)
# Work around length issue
_dMask = api.ExtractMask('BASIS_MASK')
self._dMask = _dMask[1]
api.DeleteWorkspace(_dMask[0])
############################
## Process the Vanadium ##
############################
norm_runs = self.getProperty("NormRunNumbers").value
if self._doNorm and bool(norm_runs):
if ";" in norm_runs:
raise SyntaxError("Normalization does not support run groups")
self._doNorm = self.getProperty("NormalizationType").value
self.log().information("Divide by Vanadium with normalization" +
self._doNorm)
# The following steps are common to all types of Vanadium normalization
# norm_runs encompasses a single set, thus _getRuns returns
# a list of only one item
norm_set = self._getRuns(norm_runs, doIndiv=False)[0]
self._normWs = self._sum_and_calibrate(norm_set,
extra_extension="_norm")
# This rebin integrates counts onto a histogram of a single bin
if self._doNorm == "by detectorID":
normRange = self.getProperty("NormWavelengthRange").value
self._normRange = [
normRange[0], normRange[1] - normRange[0], normRange[1]
]
api.Rebin(InputWorkspace=self._normWs,
OutputWorkspace=self._normWs,
Params=self._normRange)
# FindDetectorsOutsideLimits to be substituted by MedianDetectorTest
api.FindDetectorsOutsideLimits(InputWorkspace=self._normWs,
OutputWorkspace="BASIS_NORM_MASK")
# additional reduction steps when normalizing by Q slice
if self._doNorm == "by Q slice":
self._normWs = self._group_and_SofQW(self._normWs,
self._etBins,
isSample=False)
##########################
## Process the sample ##
##########################
self._run_list = self._getRuns(self.getProperty("RunNumbers").value,
doIndiv=self._doIndiv)
for run_set in self._run_list:
self._samWs = self._sum_and_calibrate(run_set)
self._samWsRun = str(run_set[0])
# Mask detectors with insufficient Vanadium signal
if self._doNorm:
api.MaskDetectors(Workspace=self._samWs,
MaskedWorkspace='BASIS_NORM_MASK')
# Divide by Vanadium
if self._doNorm == "by detector ID":
api.Divide(LHSWorkspace=self._samWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samWs)
# additional reduction steps
self._samSqwWs = self._group_and_SofQW(self._samWs,
self._etBins,
isSample=True)
# Divide by Vanadium
if self._doNorm == "by Q slice":
api.Integration(InputWorkspace=self._normWs,
OutputWorkspace=self._normWs,
RangeLower=DEFAULT_VANADIUM_ENERGY_RANGE[0],
RangeUpper=DEFAULT_VANADIUM_ENERGY_RANGE[1])
api.Divide(LHSWorkspace=self._samSqwWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samSqwWs)
# Clear mask from reduced file. Needed for binary operations
# involving this S(Q,w)
api.ClearMaskFlag(Workspace=self._samSqwWs)
# Scale so that elastic line has Y-values ~ 1
if self._normalizeToFirst:
self._ScaleY(self._samSqwWs)
# Output Dave and Nexus files
extension = "_divided.dat" if self._doNorm else ".dat"
dave_grp_filename = self._makeRunName(self._samWsRun,
False) + extension
api.SaveDaveGrp(Filename=dave_grp_filename,
InputWorkspace=self._samSqwWs,
ToMicroEV=True)
extension = "_divided_sqw.nxs" if self._doNorm else "_sqw.nxs"
processed_filename = self._makeRunName(self._samWsRun,
False) + extension
api.SaveNexus(Filename=processed_filename,
InputWorkspace=self._samSqwWs)
def _PyExec(self):
# Collect Flux Normalization
if self.getProperty('DoFluxNormalization').value is True:
self._flux_normalization_type =\
self.getProperty('FluxNormalizationType').value
if self._flux_normalization_type == 'Monitor':
self._MonNorm = True
self._reflection =\
REFLECTIONS_DICT[self.getProperty('ReflectionType').value]
self._doIndiv = self.getProperty('DoIndividual').value
# micro-eV to mili-eV
self._etBins = 1.E-03 * self.getProperty('EnergyBins').value
self._qBins = self.getProperty('MomentumTransferBins').value
self._qBins[0] -= self._qBins[1] / 2.0 # leftmost bin boundary
self._qBins[2] += self._qBins[1] / 2.0 # rightmost bin boundary
self._maskFile = self.getProperty('MaskFile').value
maskfile = self.getProperty('MaskFile').value
self._maskFile = maskfile if maskfile else\
pjoin(DEFAULT_MASK_GROUP_DIR, self._reflection['mask_file'])
self._groupDetOpt = self.getProperty('GroupDetectors').value
self._normalizeToFirst = self.getProperty('NormalizeToFirst').value
self._doNorm = self.getProperty('DivideByVanadium').value
# retrieve properties pertaining to saving to NXSPE file
self._nsxpe_do = self.getProperty('SaveNXSPE').value
if self._nsxpe_do:
self._nxspe_psi_angle_log = self.getProperty('PsiAngleLog').value
self._nxspe_offset = self.getProperty('PsiOffset').value
# Apply default mask if not supplied by user
self._overrideMask = bool(self._maskFile)
if not self._overrideMask:
mantid_config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
self._maskFile = self._reflection['mask_file']
self._maskWs = tws('BASIS_MASK')
sapi.LoadMask(Instrument='BASIS',
OutputWorkspace=self._maskWs,
InputFile=self._maskFile)
# Work around length issue
_dMask = sapi.ExtractMask(InputWorkspace=self._maskWs,
OutputWorkspace=tws('ExtractMask'))
self._dMask = _dMask[1]
#
# Process the Vanadium
#
norm_runs = self.getProperty('NormRunNumbers').value
if self._doNorm and bool(norm_runs):
self._normalizationType = self.getProperty(
'NormalizationType').value
self.log().information('Divide by Vanadium with normalization' +
self._normalizationType)
# Following steps common to all types of Vanadium normalization
# norm_runs encompasses a single set, thus _getRuns returns
# a list of only one item
norm_set = self._get_runs(norm_runs, doIndiv=False)[0]
normWs = tws(self._make_run_name(norm_set[0]) + '_vanadium')
self._sum_and_calibrate(norm_set, normWs)
normRange = self._reflection['vanadium_wav_range']
bin_width = normRange[1] - normRange[0]
# This rebin integrates counts onto a histogram of a single bin
if self._normalizationType == 'by detector ID':
self._normRange = [normRange[0], bin_width, normRange[1]]
sapi.Rebin(InputWorkspace=normWs,
OutputWorkspace=normWs,
Params=self._normRange)
self._normWs = normWs
# Detectors outside limits are substituted by MedianDetectorTest
self._normMask = tws('BASIS_NORM_MASK')
sapi.FindDetectorsOutsideLimits(
InputWorkspace=normWs,
LowThreshold=1.0 * bin_width,
# no count events outside ranges
RangeLower=normRange[0],
RangeUpper=normRange[1],
OutputWorkspace=self._normMask)
# additional reduction steps when normalizing by Q slice
if self._normalizationType == 'by Q slice':
self._normWs = self._group_and_SofQW(normWs,
normWs,
self._etBins,
isSample=False)
#
# Process the sample
#
self._run_list = self._get_runs(self.getProperty('RunNumbers').value,
doIndiv=self._doIndiv)
for run_set in self._run_list:
self._samWs = tws(self._make_run_name(run_set[0]))
self._sum_and_calibrate(run_set, self._samWs)
self._samWsRun = str(run_set[0])
# Divide by Vanadium detector ID, if pertinent
if self._normalizationType == 'by detector ID':
# Mask detectors with low Vanadium signal before dividing
sapi.MaskDetectors(Workspace=self._samWs,
MaskedWorkspace=self._normMask)
sapi.Divide(LHSWorkspace=self._samWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samWs)
# additional reduction steps
prefix = self._make_run_name(run_set[0])
self._samSqwWs = self._group_and_SofQW(self._samWs,
prefix,
self._etBins,
isSample=True)
# Divide by Vanadium Q slice, if pertinent
if self._normalizationType == 'by Q slice':
sapi.Divide(LHSWorkspace=self._samSqwWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samSqwWs)
# Clear mask from reduced file. Needed for binary operations
# involving this S(Q,w)
sapi.ClearMaskFlag(Workspace=self._samSqwWs)
# Scale so that elastic line has Y-values ~ 1
if self._normalizeToFirst:
self._ScaleY(self._samSqwWs)
# Transform the vertical axis (Q) to point data
# Q-values are in X-axis now
sapi.Transpose(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
# from histo to point
sapi.ConvertToPointData(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
# Q-values back to vertical axis
sapi.Transpose(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
self.serialize_in_log(self._samSqwWs) # store the call
# Output Dave and Nexus files
extension = '_divided.dat' if self._doNorm else '.dat'
dave_grp_filename = self._make_run_name(self._samWsRun, False) + \
extension
sapi.SaveDaveGrp(Filename=dave_grp_filename,
InputWorkspace=self._samSqwWs,
ToMicroEV=True)
extension = '_divided_sqw.nxs' if self._doNorm else '_sqw.nxs'
processed_filename = self._make_run_name(self._samWsRun, False) + \
extension
sapi.SaveNexus(Filename=processed_filename,
InputWorkspace=self._samSqwWs)
# additional output
if self.getProperty('OutputSusceptibility').value:
temperature = mtd[self._samSqwWs].getRun().\
getProperty(TEMPERATURE_SENSOR).getStatistics().mean
samXqsWs = self._samSqwWs.replace('sqw', 'Xqw')
sapi.ApplyDetailedBalance(InputWorkspace=self._samSqwWs,
OutputWorkspace=samXqsWs,
Temperature=str(temperature))
sapi.ConvertUnits(InputWorkspace=samXqsWs,
OutputWorkspace=samXqsWs,
Target='DeltaE_inFrequency')
self.serialize_in_log(samXqsWs)
susceptibility_filename = processed_filename.replace(
'sqw', 'Xqw')
sapi.SaveNexus(Filename=susceptibility_filename,
InputWorkspace=samXqsWs)
if self.getProperty('OutputPowderSpectrum').value:
self.generatePowderSpectrum()
def PyExec(self):
config['default.facility'] = "SNS"
config['default.instrument'] = self._long_inst
self._reflection = REFLECTIONS_DICT[self.getProperty(
"ReflectionType").value]
self._doIndiv = self.getProperty("DoIndividual").value
self._etBins = 1.E-03 * self.getProperty(
"EnergyBins").value # micro-eV to mili-eV
self._qBins = self.getProperty("MomentumTransferBins").value
self._qBins[0] -= self._qBins[
1] / 2.0 # self._qBins[0] is leftmost bin boundary
self._qBins[2] += self._qBins[
1] / 2.0 # self._qBins[2] is rightmost bin boundary
self._noMonNorm = self.getProperty("NoMonitorNorm").value
self._maskFile = self.getProperty("MaskFile").value
self._groupDetOpt = self.getProperty("GroupDetectors").value
self._normalizeToFirst = self.getProperty("NormalizeToFirst").value
self._doNorm = self.getProperty("DivideByVanadium").value
datasearch = config["datasearch.searcharchive"]
if datasearch != "On":
config["datasearch.searcharchive"] = "On"
# Apply default mask if not supplied by user
self._overrideMask = bool(self._maskFile)
if not self._overrideMask:
config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
self._maskFile = self._reflection["mask_file"]
sapi.LoadMask(Instrument='BASIS',
OutputWorkspace='BASIS_MASK',
InputFile=self._maskFile)
# Work around length issue
_dMask = sapi.ExtractMask('BASIS_MASK')
self._dMask = _dMask[1]
sapi.DeleteWorkspace(_dMask[0])
############################
## Process the Vanadium ##
############################
norm_runs = self.getProperty("NormRunNumbers").value
if self._doNorm and bool(norm_runs):
if ";" in norm_runs:
raise SyntaxError("Normalization does not support run groups")
self._normalizationType = self.getProperty(
"NormalizationType").value
self.log().information("Divide by Vanadium with normalization" +
self._normalizationType)
# The following steps are common to all types of Vanadium normalization
# norm_runs encompasses a single set, thus _getRuns returns
# a list of only one item
norm_set = self._getRuns(norm_runs, doIndiv=False)[0]
normWs = self._sum_and_calibrate(norm_set, extra_extension="_norm")
# This rebin integrates counts onto a histogram of a single bin
if self._normalizationType == "by detectorID":
normRange = self.getProperty("NormWavelengthRange").value
self._normRange = [
normRange[0], normRange[1] - normRange[0], normRange[1]
]
sapi.Rebin(InputWorkspace=normWs,
OutputWorkspace=normWs,
Params=self._normRange)
# FindDetectorsOutsideLimits to be substituted by MedianDetectorTest
sapi.FindDetectorsOutsideLimits(InputWorkspace=normWs,
OutputWorkspace="BASIS_NORM_MASK")
# additional reduction steps when normalizing by Q slice
if self._normalizationType == "by Q slice":
self._normWs = self._group_and_SofQW(normWs,
self._etBins,
isSample=False)
if not self._debugMode:
sapi.DeleteWorkspace(normWs) # Delete vanadium events file
##########################
## Process the sample ##
##########################
self._run_list = self._getRuns(self.getProperty("RunNumbers").value,
doIndiv=self._doIndiv)
for run_set in self._run_list:
self._samWs = self._sum_and_calibrate(run_set)
self._samWsRun = str(run_set[0])
# Divide by Vanadium detector ID, if pertinent
if self._normalizationType == "by detector ID":
# Mask detectors with insufficient Vanadium signal before dividing
sapi.MaskDetectors(Workspace=self._samWs,
MaskedWorkspace='BASIS_NORM_MASK')
sapi.Divide(LHSWorkspace=self._samWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samWs)
# additional reduction steps
self._samSqwWs = self._group_and_SofQW(self._samWs,
self._etBins,
isSample=True)
if not self._debugMode:
sapi.DeleteWorkspace(self._samWs) # delete events file
# Divide by Vanadium Q slice, if pertinent
if self._normalizationType == "by Q slice":
sapi.Divide(LHSWorkspace=self._samSqwWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samSqwWs)
# Clear mask from reduced file. Needed for binary operations
# involving this S(Q,w)
sapi.ClearMaskFlag(Workspace=self._samSqwWs)
# Scale so that elastic line has Y-values ~ 1
if self._normalizeToFirst:
self._ScaleY(self._samSqwWs)
# Transform the vertical axis to point data
sapi.Transpose(
InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs) # Q-values are in X-axis now
sapi.ConvertToPointData(
InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs) # from histo to point
sapi.Transpose(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs
) # Q-values back to vertical axis
# Output Dave and Nexus files
extension = "_divided.dat" if self._doNorm else ".dat"
dave_grp_filename = self._makeRunName(self._samWsRun,
False) + extension
sapi.SaveDaveGrp(Filename=dave_grp_filename,
InputWorkspace=self._samSqwWs,
ToMicroEV=True)
extension = "_divided_sqw.nxs" if self._doNorm else "_sqw.nxs"
processed_filename = self._makeRunName(self._samWsRun,
False) + extension
sapi.SaveNexus(Filename=processed_filename,
InputWorkspace=self._samSqwWs)
if not self._debugMode:
sapi.DeleteWorkspace("BASIS_MASK") # delete the mask
if self._doNorm and bool(norm_runs):
sapi.DeleteWorkspace("BASIS_NORM_MASK") # delete vanadium mask
sapi.DeleteWorkspace(self._normWs) # Delete vanadium S(Q)
def PyExec(self):
config['default.facility'] = "SNS"
config['default.instrument'] = self._long_inst
self._doIndiv = self.getProperty("DoIndividual").value
self._etBins = self.getProperty(
"EnergyBins").value / MICROEV_TO_MILLIEV
self._qBins = self.getProperty("MomentumTransferBins").value
self._noMonNorm = self.getProperty("NoMonitorNorm").value
self._maskFile = self.getProperty("MaskFile").value
self._groupDetOpt = self.getProperty("GroupDetectors").value
datasearch = config["datasearch.searcharchive"]
if datasearch != "On":
config["datasearch.searcharchive"] = "On"
# Handle masking file override if necessary
self._overrideMask = bool(self._maskFile)
if not self._overrideMask:
config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
self._maskFile = DEFAULT_MASK_FILE
api.LoadMask(Instrument='BASIS',
OutputWorkspace='BASIS_MASK',
InputFile=self._maskFile)
# Work around length issue
_dMask = api.ExtractMask('BASIS_MASK')
self._dMask = _dMask[1]
api.DeleteWorkspace(_dMask[0])
# Do normalization if run numbers are present
norm_runs = self.getProperty("NormRunNumbers").value
self._doNorm = bool(norm_runs)
self.log().information("Do Norm: " + str(self._doNorm))
if self._doNorm:
if ";" in norm_runs:
raise SyntaxError("Normalization does not support run groups")
# Setup the integration (rebin) parameters
normRange = self.getProperty("NormWavelengthRange").value
self._normRange = [
normRange[0], normRange[1] - normRange[0], normRange[1]
]
# Process normalization runs
self._norm_run_list = self._getRuns(norm_runs)
for norm_set in self._norm_run_list:
extra_extension = "_norm"
self._normWs = self._makeRunName(norm_set[0])
self._normWs += extra_extension
self._normMonWs = self._normWs + "_monitors"
self._sumRuns(norm_set, self._normWs, self._normMonWs,
extra_extension)
self._calibData(self._normWs, self._normMonWs)
api.Rebin(InputWorkspace=self._normWs, OutputWorkspace=self._normWs,\
Params=self._normRange)
api.FindDetectorsOutsideLimits(InputWorkspace=self._normWs,\
OutputWorkspace="BASIS_NORM_MASK")
self._run_list = self._getRuns(self.getProperty("RunNumbers").value)
for run_set in self._run_list:
self._samWs = self._makeRunName(run_set[0])
self._samMonWs = self._samWs + "_monitors"
self._samWsRun = str(run_set[0])
self._sumRuns(run_set, self._samWs, self._samMonWs)
# After files are all added, run the reduction
self._calibData(self._samWs, self._samMonWs)
if self._doNorm:
api.MaskDetectors(Workspace=self._samWs,\
MaskedWorkspace='BASIS_NORM_MASK')
api.Divide(LHSWorkspace=self._samWs, RHSWorkspace=self._normWs,\
OutputWorkspace=self._samWs)
api.ConvertUnits(InputWorkspace=self._samWs,
OutputWorkspace=self._samWs,
Target='DeltaE',
EMode='Indirect')
api.CorrectKiKf(InputWorkspace=self._samWs,
OutputWorkspace=self._samWs,
EMode='Indirect')
api.Rebin(InputWorkspace=self._samWs,
OutputWorkspace=self._samWs,
Params=self._etBins)
if self._groupDetOpt != "None":
if self._groupDetOpt == "Low-Resolution":
grp_file = "BASIS_Grouping_LR.xml"
else:
grp_file = "BASIS_Grouping.xml"
# If mask override used, we need to add default grouping file location to
# search paths
if self._overrideMask:
config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
api.GroupDetectors(InputWorkspace=self._samWs,
OutputWorkspace=self._samWs,
MapFile=grp_file,
Behaviour="Sum")
self._samSqwWs = self._samWs + '_sqw'
api.SofQW3(InputWorkspace=self._samWs,
OutputWorkspace=self._samSqwWs,
QAxisBinning=self._qBins,
EMode='Indirect',
EFixed=DEFAULT_ENERGY)
dave_grp_filename = self._makeRunName(self._samWsRun,
False) + ".dat"
api.SaveDaveGrp(Filename=dave_grp_filename,
InputWorkspace=self._samSqwWs,
ToMicroEV=True)
processed_filename = self._makeRunName(self._samWsRun,
False) + "_sqw.nxs"
api.SaveNexus(Filename=processed_filename,
InputWorkspace=self._samSqwWs)
def PyExec(self):
config['default.facility'] = 'SNS'
config['default.instrument'] = self._long_inst
self._reflection =\
REFLECTIONS_DICT[self.getProperty('ReflectionType').value]
self._doIndiv = self.getProperty('DoIndividual').value
# micro-eV to mili-eV
self._etBins = 1.E-03 * self.getProperty('EnergyBins').value
self._qBins = self.getProperty('MomentumTransferBins').value
self._qBins[0] -= self._qBins[1]/2.0 # leftmost bin boundary
self._qBins[2] += self._qBins[1]/2.0 # rightmost bin boundary
self._MonNorm = self.getProperty('MonitorNorm').value
self._maskFile = self.getProperty('MaskFile').value
maskfile = self.getProperty('MaskFile').value
self._maskFile = maskfile if maskfile else\
pjoin(DEFAULT_MASK_GROUP_DIR, self._reflection['mask_file'])
self._groupDetOpt = self.getProperty('GroupDetectors').value
self._normalizeToFirst = self.getProperty('NormalizeToFirst').value
self._doNorm = self.getProperty('DivideByVanadium').value
# retrieve properties pertaining to saving to NXSPE file
self._nsxpe_do = self.getProperty('SaveNXSPE').value
if self._nsxpe_do:
self._nxspe_psi_angle_log = self.getProperty('PsiAngleLog').value
self._nxspe_offset = self.getProperty('PsiOffset').value
datasearch = config["datasearch.searcharchive"]
if datasearch != "On":
config["datasearch.searcharchive"] = "On"
# Apply default mask if not supplied by user
self._overrideMask = bool(self._maskFile)
if not self._overrideMask:
config.appendDataSearchDir(DEFAULT_MASK_GROUP_DIR)
self._maskFile = self._reflection["mask_file"]
sapi.LoadMask(Instrument='BASIS',
OutputWorkspace='BASIS_MASK',
InputFile=self._maskFile)
# Work around length issue
_dMask = sapi.ExtractMask('BASIS_MASK')
self._dMask = _dMask[1]
sapi.DeleteWorkspace(_dMask[0])
############################
## Process the Vanadium ##
############################
norm_runs = self.getProperty("NormRunNumbers").value
if self._doNorm and bool(norm_runs):
if ";" in norm_runs:
raise SyntaxError("Normalization does not support run groups")
self._normalizationType = self.getProperty("NormalizationType").value
self.log().information("Divide by Vanadium with normalization" +
self._normalizationType)
# Following steps common to all types of Vanadium normalization
# norm_runs encompasses a single set, thus _getRuns returns
# a list of only one item
norm_set = self._getRuns(norm_runs, doIndiv=False)[0]
normWs = self._sum_and_calibrate(norm_set, extra_extension="_norm")
normRange = self.getProperty("NormWavelengthRange").value
bin_width = normRange[1] - normRange[0]
# This rebin integrates counts onto a histogram of a single bin
if self._normalizationType == "by detector ID":
self._normRange = [normRange[0], bin_width, normRange[1]]
sapi.Rebin(InputWorkspace=normWs,
OutputWorkspace=normWs,
Params=self._normRange)
self._normWs = normWs
# FindDetectorsOutsideLimits to be substituted by MedianDetectorTest
sapi.FindDetectorsOutsideLimits(InputWorkspace=normWs,
LowThreshold=1.0*bin_width,
# no count events outside ranges
RangeLower=normRange[0],
RangeUpper=normRange[1],
OutputWorkspace='BASIS_NORM_MASK')
# additional reduction steps when normalizing by Q slice
if self._normalizationType == "by Q slice":
self._normWs = self._group_and_SofQW(normWs, self._etBins,
isSample=False)
##########################
## Process the sample ##
##########################
self._run_list = self._getRuns(self.getProperty("RunNumbers").value,
doIndiv=self._doIndiv)
for run_set in self._run_list:
self._samWs = self._sum_and_calibrate(run_set)
self._samWsRun = str(run_set[0])
# Divide by Vanadium detector ID, if pertinent
if self._normalizationType == "by detector ID":
# Mask detectors with insufficient Vanadium signal before dividing
sapi.MaskDetectors(Workspace=self._samWs,
MaskedWorkspace='BASIS_NORM_MASK')
sapi.Divide(LHSWorkspace=self._samWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samWs)
# additional reduction steps
self._samSqwWs = self._group_and_SofQW(self._samWs, self._etBins,
isSample=True)
if not self._debugMode:
sapi.DeleteWorkspace(self._samWs) # delete events file
# Divide by Vanadium Q slice, if pertinent
if self._normalizationType == "by Q slice":
sapi.Divide(LHSWorkspace=self._samSqwWs,
RHSWorkspace=self._normWs,
OutputWorkspace=self._samSqwWs)
# Clear mask from reduced file. Needed for binary operations
# involving this S(Q,w)
sapi.ClearMaskFlag(Workspace=self._samSqwWs)
# Scale so that elastic line has Y-values ~ 1
if self._normalizeToFirst:
self._ScaleY(self._samSqwWs)
# Transform the vertical axis (Q) to point data
# Q-values are in X-axis now
sapi.Transpose(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
# from histo to point
sapi.ConvertToPointData(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
# Q-values back to vertical axis
sapi.Transpose(InputWorkspace=self._samSqwWs,
OutputWorkspace=self._samSqwWs)
self.serialize_in_log(self._samSqwWs) # store the call
# Output Dave and Nexus files
extension = "_divided.dat" if self._doNorm else ".dat"
dave_grp_filename = self._makeRunName(self._samWsRun, False) +\
extension
sapi.SaveDaveGrp(Filename=dave_grp_filename,
InputWorkspace=self._samSqwWs,
ToMicroEV=True)
extension = "_divided_sqw.nxs" if self._doNorm else "_sqw.nxs"
processed_filename = self._makeRunName(self._samWsRun, False) +\
extension
sapi.SaveNexus(Filename=processed_filename,
InputWorkspace=self._samSqwWs)
# additional output
if self.getProperty("OutputSusceptibility").value:
temperature = mtd[self._samSqwWs].getRun().\
getProperty(TEMPERATURE_SENSOR).getStatistics().mean
samXqsWs = self._samSqwWs.replace("sqw", "Xqw")
sapi.ApplyDetailedBalance(InputWorkspace=self._samSqwWs,
OutputWorkspace=samXqsWs,
Temperature=str(temperature))
sapi.ConvertUnits(InputWorkspace=samXqsWs,
OutputWorkspace=samXqsWs,
Target="DeltaE_inFrequency",
Emode="Indirect")
self.serialize_in_log(samXqsWs)
susceptibility_filename = processed_filename.replace("sqw", "Xqw")
sapi.SaveNexus(Filename=susceptibility_filename,
InputWorkspace=samXqsWs)
if not self._debugMode:
sapi.DeleteWorkspace("BASIS_MASK") # delete the mask
if self._doNorm and bool(norm_runs):
sapi.DeleteWorkspace("BASIS_NORM_MASK") # delete vanadium mask
sapi.DeleteWorkspace(self._normWs) # Delete vanadium S(Q)
if self._normalizationType == "by Q slice":
sapi.DeleteWorkspace(normWs) # Delete vanadium events file
if self.getProperty("ExcludeTimeSegment").value:
sapi.DeleteWorkspace('splitter')
[sapi.DeleteWorkspace(name) for name in
('splitted_unfiltered', 'TOFCorrectWS') if
AnalysisDataService.doesExist(name)]