def run():
# Create a list of contact models to analyze
models = [sim.models.SpringDashpot, sim.models.HertzMindlin]
# Set particle radius to 1 mm
steel['radius'] = 1e-3
# Compute the force-displacement curve
for model in models:
model = model(material=steel, limitForce=True)
time, delta, force = model.displacement()
plt.plot(delta[:,0] * 1e6, force * 1e3)
if hasattr(model, 'displacementAnalytical'):
time, delta, force = model.displacementAnalytical()
plt.plot(delta[:,0] * 1e6, force * 1e3, ':o')
plt.ticklabel_format(style='sci', axis='x', scilimits=(0,0))
plt.ticklabel_format(style='sci', axis='y', scilimits=(0,0))
plt.legend(['SpringDashpot (numerical)', 'SpringDashpot (analytical)', 'HertzMindlin'], loc='best')
plt.xlabel(r'$\delta$ $(\mu m)$')
plt.ylabel('Force (mN)')
plt.grid(linestyle=':')
plt.show()
def run():
# Create a list of contact models to analyze
models = [sim.models.SpringDashpot, sim.models.HertzMindlin]
# Set particle radius to 1 mm
steel['radius'] = 1e-3
# Compute the force-displacement curve
for model in models:
model = model(material=steel, limitForce=True)
time, delta, force = model.displacement()
plt.plot(delta[:, 0] * 1e6, force * 1e3)
if hasattr(model, 'displacementAnalytical'):
time, delta, force = model.displacementAnalytical()
plt.plot(delta[:, 0] * 1e6, force * 1e3, ':o')
plt.ticklabel_format(style='sci', axis='x', scilimits=(0, 0))
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.legend([
'SpringDashpot (numerical)', 'SpringDashpot (analytical)',
'HertzMindlin'
],
loc='best')
plt.xlabel(r'$\delta$ $(\mu m)$')
plt.ylabel('Force (mN)')
plt.grid(linestyle=':')
plt.show()
def run():
# Create a list of contact models to analyze
models = [sim.models.SpringDashpot, sim.models.HertzMindlin]
# Set particle radius to 1 mm
steel["radius"] = 1e-3
# Compute the force-displacement curve
for model in models:
model = model(material=steel, limitForce=True)
time, delta, force = model.displacement()
plt.plot(delta[:, 0] * 1e6, force * 1e3)
if hasattr(model, "displacementAnalytical"):
time, delta, force = model.displacementAnalytical()
plt.plot(delta[:, 0] * 1e6, force * 1e3, ":o")
plt.ticklabel_format(style="sci", axis="x", scilimits=(0, 0))
plt.ticklabel_format(style="sci", axis="y", scilimits=(0, 0))
plt.legend(
[
"SpringDashpot (numerical)", "SpringDashpot (analytical)",
"HertzMindlin"
],
loc="best",
)
plt.xlabel(r"$\delta$ $(\mu m)$")
plt.ylabel("Force (mN)")
plt.grid(linestyle=":")
plt.show()
def show_results(res1, res2, res3, res4, param):
fig, axes = plt.subplots()
x2 = [i for i in range(1000)]
#axes.plot(x2, res1, 'gold', label="20x20")
#axes.plot(x2, res2, 'orange', label="40x40")
#axes.plot(x2, res3, 'r', label="80x80")
axes.plot(x2, res4, 'k', label=r"$\ell = 3 \; (160\times160)$")
if param != None:
plt.axhline(
y=param[0],
linestyle='--',
color='k',
label=
r"$\mathrm{\mathbb{E}} \left[\Vert u\Vert^2_{L^2} \right]_{MLMC}$")
#axes.hist(solutions, bins = 40, color = 'blue', edgecolor = 'black')
plt.style.use('classic')
axes.legend(loc="best", prop={'size': 13})
axes.set_ylabel(
r'$\mathrm{\mathbb{E}} \left[\Vert u \Vert^2_{L^2} \right]$',
fontsize=14)
axes.set_xlabel(r'Repetitions, $N$', fontsize=13)
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
axes.tick_params(axis="y", direction='in', which='both')
axes.tick_params(axis="x", direction='in', which='both')
plt.tight_layout()
plt.show()
def last_two():
P = data.load_file()
params = {
"epochs": 4000,
"neurons": 1024,
"learn_method": 'classic'
}
# generate weight matrix
W = np.random.randn(params['neurons'], params['neurons'])
W = (W + W.T) / 2
W = W - np.diag(W.diagonal())
p = np.random.randint(-1, 1, params['neurons']).reshape(1,-1)
p = (p*2) + 1
Hop = HopfieldNet(p)
Hop.W = W
recalled_set, energy = Hop.sequential_recall_shuffle(p, epochs=4000)
plt.imshow(recalled_set.reshape(32,32))
plt.show()
plt.plot(range(len(energy[0])), energy[0])
plt.xlabel('Epoch', fontsize=16)
plt.ylabel('Energy', fontsize=16)
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.savefig('Energy_sym.png')
plt.show()
def plithist(im, nbins=256):
f = plt.figure(figsize=(6, 6))
plt.hist(im.ravel(), bins=nbins, histtype='step', color='black')
img_cdf, bins = exposure.cumulative_distribution(im, nbins)
plt.plot(bins, img_cdf, 'r')
plt.ticklabel_format(axis='y', style='scientific', scilimits=(0, 0))
plt.xlabel('Pixel intensity')
plt.xlim(0, 1)
plt.yticks([])
def plot_autocorrs(self, axis=0, n_rows=4, n_cols=8):
""" Plot autocorrelations for all antennas
"""
self.current_plot = 'multi'
self.ax_zoomed = False
bls = self.uv.d_uv_data['BASELINE']
# Extract the relevant baselines using a truth array
# bls = bls.tolist()
bl_ids = set([256*i + i for i in range(1, n_rows * n_cols + 1)])
bl_truths = np.array([(b in bl_ids) for b in bls])
#print self.uv.d_uv_data['DATA'].shape
#x_data = self.d_uv_data['DATA'][bl_truths,0,0,:,0,axis] # Baselines, freq and stokes
#x_cplx = x_data[:,:,0] + 1j * x_data[:,:,1]
x_cplx = self.stokes[axis][bl_truths]
# Plot the figure
#print self.uv.n_ant
fig = self.sp_fig
figtitle = '%s %s: %s -- %s'%(self.uv.telescope, self.uv.instrument, self.uv.source, self.uv.date_obs)
for i in range(n_rows):
for j in range(n_cols):
ax = fig.add_subplot(n_rows, n_cols, i*n_cols + j +1)
ax.set_title(self.uv.d_array_geometry['ANNAME'][i*n_cols + j], fontsize=10)
#ax.set_title("%s %s"%(i, j))
x = x_cplx[i*n_cols+j::self.uv.n_ant]
if self.scale_select.currentIndex() == 0 or self.scale_select.currentIndex() == 1:
if x.shape[0] == self.uv.n_ant:
self.plot_spectrum(ax, x, label_axes=False)
else:
self.plot_spectrum(ax, x, stat='max', label_axes=False)
self.plot_spectrum(ax, x, stat='med', label_axes=False)
self.plot_spectrum(ax, x, stat='min', label_axes=False)
else:
self.plot_spectrum(ax, x, label_axes=False)
self.updateFreqAxis(ax)
if i == n_rows-1:
ax.set_xlabel('Freq')
if j == 0:
ax.set_ylabel('Amplitude')
plt.ticklabel_format(style='sci', axis='y', scilimits=(0,0))
plt.tick_params(axis='both', which='major', labelsize=10)
plt.tick_params(axis='both', which='minor', labelsize=8)
plt.xticks(rotation=30)
plt.subplots_adjust(left=0.05, right=0.98, top=0.95, bottom=0.1, wspace=0.3, hspace=0.45)
return fig, ax
def show_cavity_step(title):
plt.title(title, fontsize=40, y=1.02)
plt.xlabel('Time [s]', fontsize=30)
plt.ylabel(r'$| \vec V_{\rm acc}|$ [V]', fontsize=30)
plt.ticklabel_format(style='sci', axis='y', scilimits=(1, 0))
plt.rc('font', **{'size': 20})
plt.legend(loc='upper right')
plt.show()
def plotdata(self, xdata, ydata):
self.subplot = self.plot.add_subplot(1, 1, 1) ;
self.subplot.xaxis.grid(True, which = 'both') ;
plt.ticklabel_format(style = 'sci', axis = 'x', scilimits = (0,0)) ;
self.subplot.xaxis.set_minor_locator(self.minorLocator) ;
self.subplot.plot(xdata, ydata, 'k') ;
print (xdata)
print (ydata)
def unit_SSA(showplots=True, TOL=1.0e-14):
"""
Unit test for Solid-State Amplifier funtion.
Performs the step response of the SSA (which included a low-pass filter + Saturation) and plots the results.
This is not a PASS/FAIL test and just intended to provide qualitative evidence, but it could potentially be compared
with the real SSA in use.
"""
# Import JSON parser module
from get_configuration import Get_SWIG_RF_Station
# Configuration file for specific test configuration
# (to be appended to standard test cavity configuration)
test_file = [
"source/configfiles/unit_tests/LCLS-II_accelerator.json",
"source/configfiles/unit_tests/SSA_test.json"
]
# Get SWIG-wrapped C handles for RF Station
rf_station, Tstep, fund_mode_dict = Get_SWIG_RF_Station(test_file,
Verbose=False)
# Simulation duration
Tmax = 1e-6
# Create time vector
trang = np.arange(0, Tmax, Tstep)
# Number of points
nt = len(trang)
# Initialize vectors for test
sout = np.zeros(nt,
dtype=np.complex) # Overall cavity accelerating voltage
# Set drive signal to 60% of full power
drive = rf_station.C_Pointer.PAscale * 0.6
# Run numerical simulation
for i in xrange(1, nt):
sout[i] = acc.SSA_Step(rf_station.C_Pointer, drive, rf_station.State)
# Format plot
plt.plot(trang, np.abs(sout), '-', label='SSA output', linewidth=3)
plt.ticklabel_format(style='sci', axis='x', scilimits=(1, 0))
plt.title('SSA Test', fontsize=40, y=1.01)
plt.xlabel('Time [s]', fontsize=30)
plt.ylabel('Amplitude ' + r'[$\sqrt{W}$]', fontsize=30)
plt.legend(loc='upper right')
plt.ylim([0, 50])
plt.show()
def plot_autocorrs(self, axis=0, n_rows=4, n_cols=8):
""" Plot autocorrelations for all antennas
"""
self.current_plot = 'multi'
self.ax_zoomed = False
bls = self.uv.d_uv_data['BASELINE']
# Extract the relevant baselines using a truth array
# bls = bls.tolist()
bl_ids = [256*i + i for i in range(1,self.uv.n_ant+1)]
bl_truths = np.array([(b in bl_ids) for b in bls])
#print self.uv.d_uv_data['DATA'].shape
#x_data = self.d_uv_data['DATA'][bl_truths,0,0,:,0,axis] # Baselines, freq and stokes
#x_cplx = x_data[:,:,0] + 1j * x_data[:,:,1]
x_cplx = self.stokes[axis][bl_truths]
#print x_cplx.shape
# Plot the figure
#print self.uv.n_ant
fig = self.sp_fig
figtitle = '%s %s: %s -- %s'%(self.uv.telescope, self.uv.instrument, self.uv.source, self.uv.date_obs)
for i in range(n_rows):
for j in range(n_cols):
ax = fig.add_subplot(n_rows, n_cols, i*n_cols + j +1)
ax.set_title(self.uv.d_array_geometry['ANNAME'][i*n_cols + j], fontsize=10)
#ax.set_title("%s %s"%(i, j))
x = x_cplx[i*n_cols+j::self.uv.n_ant]
if self.scale_select.currentIndex() == 0 or self.scale_select.currentIndex() == 1:
self.plot_spectrum(ax, x, stat='max', label_axes=False)
self.plot_spectrum(ax, x, stat='med', label_axes=False)
self.plot_spectrum(ax, x, stat='min', label_axes=False)
else:
self.plot_spectrum(ax, x, label_axes=False)
self.updateFreqAxis(ax)
if i == n_rows-1:
ax.set_xlabel('Freq')
if j == 0:
ax.set_ylabel('Amplitude')
plt.ticklabel_format(style='sci', axis='y', scilimits=(0,0))
plt.tick_params(axis='both', which='major', labelsize=10)
plt.tick_params(axis='both', which='minor', labelsize=8)
plt.xticks(rotation=30)
plt.subplots_adjust(left=0.05, right=0.98, top=0.95, bottom=0.1, wspace=0.3, hspace=0.45)
return fig, ax
def violin_plot(ax, values_list, measure_name, group_names, fontsize, color='blue', ttest=False):
'''
This is a little wrapper around the statsmodels violinplot code
so that it looks nice :)
'''
# IMPORTS
import matplotlib.pylab as plt
import statsmodels.api as sm
import numpy as np
# Make your violin plot from the values_list
# Don't show the box plot because it looks a mess to be honest
# we're going to overlay a boxplot on top afterwards
plt.sca(ax)
# Adjust the font size
font = { 'size' : fontsize}
plt.rc('font', **font)
max_value = np.max(np.concatenate(values_list))
min_value = np.min(np.concatenate(values_list))
vp = sm.graphics.violinplot(values_list,
ax = ax,
labels = group_names,
show_boxplot=False,
plot_opts = { 'violin_fc':color ,
'cutoff': True,
'cutoff_val': max_value,
'cutoff_type': 'abs'})
# Now plot the boxplot on top
bp = plt.boxplot(values_list, sym='x')
for key in bp.keys():
plt.setp(bp[key], color='black', lw=fontsize/10)
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
ax.yaxis.major.formatter.set_powerlimits((-3,3))
plt.tick_params(axis='both', which='major', labelsize=fontsize)
# Add the y label
plt.ylabel(measure_name, fontsize=fontsize)
# And now turn off the major ticks on the y-axis
for t in ax.yaxis.get_major_ticks():
t.tick1On = False
t.tick2On = False
return ax
def histograms(det,sec):
'''
:param det: det-data-product of an uswipha instance
:param sec: sec-data-product of an uswipha instance
:return: simple histograms of the det- and sec-distribution in the given data
'''
fig, (ax1,ax2) = pylab.subplots(1,2)
ax1.hist(det, bins = [0,1,2,3,4])
ax1.set_xticks(np.arange(0.5,4.5,1))
ax1.set_xticklabels(np.arange(0,4,1))
ax1.set_title('det')
ax2.hist(sec, bins = np.arange(0,8,1))
ax2.set_title('sec')
pylab.ticklabel_format(style='sci', axis='y')
def run():
# Setup matplotlib params
mpl.rc("text", usetex=True)
plt.rcParams.update({"font.size": 18})
cModel = sim.models.ThorntonNing
COR, yieldVel = [], []
# Create a yield pressure array to study
pressure = arange(1, 6, 0.1) * cohesionless["youngsModulus"] * 0.01
# Set particle radius to 100 microns
cohesionless["radius"] = 1e-4
for yieldPress in pressure:
cohesionless["yieldPress"] = yieldPress
model = cModel(material=cohesionless)
time, disp, force = model.displacement()
deltav = disp[:, 1]
COR.append(fabs(deltav[-1] / cohesionless["characteristicVelocity"]))
yieldVel.append(model.yieldVel /
cohesionless["characteristicVelocity"])
ratio = array(yieldVel)
ratio[ratio > 1] = 1
COR_anal = (sqrt(6.0 * sqrt(3.0) / 5.0) * sqrt(1.0 - (1.0 / 6.0) *
(ratio)**2) *
(ratio / (ratio + 2 * sqrt(6.0 / 5.0 -
(1.0 / 5.0) * ratio**2)))**(0.25))
fig = plt.figure()
plt.plot(pressure, COR, "-o")
plt.plot(pressure, COR_anal)
plt.ticklabel_format(style="sci", axis="x", scilimits=(0, 0))
plt.ticklabel_format(style="sci", axis="y", scilimits=(0, 0))
plt.xlabel("Yield Pressure (MPa)")
plt.ylabel("Coefficient of Restitution")
plt.grid(linestyle=":")
plt.legend(["Numerical", "Analytical"])
plt.show()
def collect(self):
for topic, msg, t in self.bag.read_messages(topics="/nav/fix"):
if topic == "/nav/fix":
self.gnss_data_dict[msg.status.status].append( np.array([msg.longitude, msg.latitude]) )
status_num = [0]*8
for key_name in self.gnss_data_dict.keys():
status_len = len(self.gnss_data_dict[key_name])
if status_len == 0:
continue
elif status_len == 1:
self.gnss_data_dict[key_name] = np.array(self.gnss_data_dict[key_name])
else:
self.gnss_data_dict[key_name] = np.vstack( self.gnss_data_dict[key_name])
status_num[key_name] += status_len
bar_edge = [-0.5, 0.5, 1.5, 2.5, 3.5, 4.5, 5.5, 6.5]
plt.figure()
plt.subplot(121)
plt.xlabel("GNSS status")
plt.ylabel("Points")
plt.title("Total points: %d"%sum(status_num))
plt.bar(bar_edge, status_num)
for i, v in enumerate(status_num):
plt.text(bar_edge[i], v, str(v))
self.color_lst = ['k', 'w', 'm', 'c', 'r', 'o', 'y', 'b']
handle_lst = []
plt.subplot(122)
plt.axis('equal')
plt.xlabel("Longitude")
plt.ylabel("Latitude")
plt.ticklabel_format(useOffset=False)
for i in range(8):
if status_num[i] == 0:
continue
if i != 7:
plt_handle, = plt.plot(self.gnss_data_dict[i][:,0], self.gnss_data_dict[i][:,1], \
"*"+self.color_lst[i],label="status="+str(i), markersize=10)
else:
plt_handle, = plt.plot(self.gnss_data_dict[i][:,0], self.gnss_data_dict[i][:,1], \
"."+self.color_lst[i],label="status="+str(i), markersize=2)
handle_lst.append(plt_handle)
plt.legend(handles=handle_lst, loc=2)
plt.show()
def create_bar_plots(bins,
freq_list,
height,
group_names,
colors,
xlabel,
ylabel,
legend=True):
import matplotlib.pylab as plt
import numpy as np
from matplotlib.ticker import MaxNLocator
fig = plt.figure(figsize=(height * 1.5, height))
ax = fig.add_subplot(111)
font = {'size': 22 * height / 8}
plt.rc('font', **font)
range = np.max(bins) - np.min(bins)
w = range / ((len(bins) - 1) * len(group_names))
for i, group in enumerate(group_names):
bar = plt.bar(bins + w * i,
freq_list[i],
width=w,
label=group,
color=colors[i],
edgecolor='none')
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
ax.yaxis.major.formatter.set_powerlimits((-3, 3))
for t in ax.yaxis.get_major_ticks():
t.tick1On = False
t.tick2On = False
if legend:
plt.legend(loc=0)
plt.ylabel(ylabel)
plt.xlabel(xlabel)
# Make sure the layout looks good :)
fig.tight_layout()
return fig
def OpenPlot(self):
def getspec(self):
global x
global y
ftypes = [('Data files', '*.dat'), ('All files', '*')]
dlg = tkFileDialog.Open(self, filetypes = ftypes)
fl = dlg.show()
if fl != '':
f = open(fl)
data = np.loadtxt(f)
x = data[:,0]
y = data[:,1]
getspec(self)
minorLocator = AutoMinorLocator()
golden = (plt.sqrt(5) + 1.)/2.
figprops = dict(figsize = (6., 6./golden), dpi = 128)
adjustprops = dict(left = 0.15, bottom = 0.20, right = 0.90, top = 0.93, wspace = 0.2, hspace = 0.2)
MyPlot = plt.figure(1, **figprops)
MyPlot.subplots_adjust(**adjustprops)
plt.clf()
MySubplot = MyPlot.add_subplot(1, 1, 1)
MySubplot.plot(x,y)
plt.xlabel('$\lambda$ ($\AA$)', fontsize = 18)
plt.ylabel('$F_\lambda$ ($10^{-17}$ erg/$cm^2$/s/$\AA$)', fontsize = 18)
axes = plt.gca()
plt.tick_params(which = 'both', width = 2)
plt.tick_params(which = 'major', length = 4)
plt.tick_params(which = 'minor', length = 4, color = 'r')
MySubplot.xaxis.grid(True, which = "both")
plt.ticklabel_format(style = 'sci', axis = 'x', scilimits = (0,0))
MySubplot.xaxis.set_minor_locator(minorLocator)
print("Done!")
def run():
# Setup matplotlib params
mpl.rc('text', usetex=True)
plt.rcParams.update({'font.size': 18})
cModel = sim.models.ThorntonNing
COR, yieldVel = [], []
# Create a yield pressure array to study
pressure = arange(1, 6, 0.1) * cohesionless['youngsModulus'] * 0.01
# Set particle radius to 100 microns
cohesionless['radius'] = 1e-4
for yieldPress in pressure:
cohesionless['yieldPress'] = yieldPress
model = cModel(material=cohesionless)
time, disp, force = model.displacement()
deltav = disp[:, 1]
COR.append(fabs(deltav[-1] / cohesionless['characteristicVelocity']))
yieldVel.append(model.yieldVel /
cohesionless['characteristicVelocity'])
ratio = array(yieldVel)
ratio[ratio > 1] = 1
COR_anal = sqrt(6. * sqrt(3.0) / 5.0) * sqrt(1.0 - (1.0/6.0) * (ratio)**2) * \
(ratio / (ratio + 2 * sqrt( 6.0/5.0 - (1.0/5.0) * ratio**2 ) ) )**(0.25)
fig = plt.figure()
plt.plot(pressure, COR, '-o')
plt.plot(pressure, COR_anal)
plt.ticklabel_format(style='sci', axis='x', scilimits=(0, 0))
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.xlabel('Yield Pressure (MPa)')
plt.ylabel('Coefficient of Restitution')
plt.grid(linestyle=':')
plt.legend(['Numerical', 'Analytical'])
plt.show()
def create_bar_plots(bins, freq_list, height, group_names, colors, xlabel, ylabel, legend=True):
import matplotlib.pylab as plt
import numpy as np
from matplotlib.ticker import MaxNLocator
fig = plt.figure(figsize=(height*1.5, height))
ax = fig.add_subplot(111)
font = { 'size' : 22 * height/8}
plt.rc('font', **font)
range = np.max(bins) - np.min(bins)
w = range/((len(bins)-1) * len(group_names))
for i, group in enumerate(group_names):
bar = plt.bar(bins + w*i, freq_list[i],
width=w, label = group,
color=colors[i],
edgecolor='none')
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
ax.yaxis.major.formatter.set_powerlimits((-3,3))
for t in ax.yaxis.get_major_ticks():
t.tick1On = False
t.tick2On = False
if legend:
plt.legend(loc=0)
plt.ylabel(ylabel)
plt.xlabel(xlabel)
# Make sure the layout looks good :)
fig.tight_layout()
return fig
def Plot_Resumen_estrategia(cls,
df: DataFrame,
title: str = None,
plot_rounds: bool = False,
plot_cumulative: bool = True,
figsize: tuple = (17, 7),
column_position: str = "Position",
column_cumulative: str = "Cumulative",
color_round: str = "rebeccapurple",
color_cumulative: str = "royalblue"):
if plot_rounds and plot_cumulative:
fig = plt.figure(figsize=(25, 10))
plt.subplot(121)
df[column_position].plot(figsize=figsize, color=color_round)
plt.ticklabel_format(axis="y",
style="sci",
scilimits=(4, 4),
useMathText=True)
plt.xlabel("Dates")
plt.ylabel("USD")
plt.subplot(122)
df[column_cumulative].plot(figsize=figsize, color=color_cumulative)
plt.ticklabel_format(axis="y",
style="sci",
scilimits=(4, 4),
useMathText=True)
plt.xlabel("Dates")
plt.ylabel("USD")
elif plot_rounds and not plot_cumulative:
df[column_position].plot(figsize=figsize,
color=color_round,
title=title)
plt.ticklabel_format(axis="y",
style="sci",
scilimits=(4, 4),
useMathText=True)
plt.xlabel("Dates")
plt.ylabel("USD")
elif plot_cumulative and not plot_rounds:
df[column_cumulative].plot(figsize=figsize,
color=color_cumulative,
title=title)
plt.ticklabel_format(axis="y",
style="sci",
scilimits=(4, 4),
useMathText=True)
plt.xlabel("Dates")
plt.ylabel("USD")
def plotTrajectory(self, sample_type='o-'):
handle_lst = []
plt.axis('equal')
plt.xlabel("time sample")
plt.ylabel("value")
plt.ticklabel_format(useOffset=False)
plt_handle0, = plt.plot(self.sub_data0,
sample_type +
self.color_list[self.color_choice[0]],
label="/trajectory0",
markersize=5)
plt_handle1, = plt.plot(self.sub_data1,
sample_type +
self.color_list[self.color_choice[1]],
label="/trajectory1",
markersize=5)
handle_lst.append(plt_handle0)
handle_lst.append(plt_handle1)
plt.legend(handles=handle_lst, loc=2)
plt.pause(0.5 / self.update_rate)
def main():
one = np.array([0.8656, 0.8683, 0.8716, 0.8698])
e1 = np.array([0.0007, 0.0006, 0.0006, 0.0006])
two = np.array([0.8748, 0.8781, 0.8808, 0.8798])
e2 = np.array([0.0010, 0.0007, 0.0006, 0.0006])
three = np.array([0.8778, 0.8822, 0.8848, 0.8864])
e3 = np.array([0.0011, 0.0008, 0.0006, 0.0007])
p1 = np.array([795010, 1590010, 3180010, 6360010])
p2 = np.array([798360, 1570335, 3173685, 6314185])
p3 = np.array([792505, 1580320, 3187627, 6355475])
plt.errorbar(p1, one, e1, marker="o", color='red', label='One')
plt.errorbar(p2, two, e2, marker='s', color='blue', label='Two')
plt.errorbar(p3, three, e3, marker='^', color='green', label='Three')
plt.ticklabel_format(axis='x', style='sci', scilimits=(0, 0))
plt.xlabel("Parameters")
plt.ylabel("Score")
plt.legend(loc='lower right')
plt.tight_layout()
plt.savefig("relu_layers.pdf", format="pdf", dpi=600)
plt.show()
# period
T = 1.0 / dt
length = samp * dt
# number of coefficients (initial value: 100)
N = 100
# weighting factors for coefficients (selected randomly)
a0 = np.random.rand(1)
a = np.random.randint(1, high=11, size=N)
b = np.random.randint(1, high=11, size=N)
t = np.linspace(0, length, samp) # time axis
sig = series_real_coeff(a0, a, b, t, T)
# plotting
plt.plot(t, sig, 'r', label='arbitrary, periodic, discrete, finite signal')
plt.ticklabel_format(axis='y', style='sci', scilimits=(-1,1))
plt.xlabel('time [sec]')
plt.ylabel('amplitude')
plt.legend()
plt.show()
# -
# ---
# Now, we can play with the signal and see what happens when we try to reconstruct it with a limited number of coefficients.
# 2) Run the cells 4 and 5. What do you observe?
# 3) Increase the number of coefficients $n$ step by step and re-run cells 4 and 5. What do you observe now? Can you explain?
# 4) In cell 5 uncomment the lines to make a plot which is not normalized (and comment the other two) and re-run the cell. What do you see now and can you explain it?
# Cell 4: determine the first 'n' coefficients of the function using the code function of cell 1
T = 1 # period
n = 5 # number of coeffs to reconstruct
def scatter_interaction(ax, x, y, groups, colors, ms=5, labels=None, title=None, legend=False, formula='y ~ x', legend_loc='best'):
# Here are the imports
import numpy as np
import matplotlib.pylab as plt
import pandas as pd
from scipy.stats import pearsonr
from statsmodels.sandbox.regression.predstd import wls_prediction_std
from statsmodels.formula.api import ols
from statsmodels.stats.outliers_influence import summary_table
# If you haven't already been given an axis on which to plot, then
# create a new figure
if not ax:
fig = plt.figure(figsize = (5,4))
ax = fig.add_subplot(111)
marker_styles = [ 'o', '^', 'D', 's', '*' ] * len(groups)
line_styles = ['--', '-', '-.', ':'] * len(groups)
# Loop through all the groups
for i, x_i, y_i, c_i, g_i, m_i, l_i in zip(range(len(groups)), x, y, colors, groups, marker_styles, line_styles):
# Scatter each with the appropriate colors
ax.scatter(x_i, y_i, c=c_i, edgecolor=c_i, alpha=0.8, s=ms, marker=m_i, zorder=7*i)
# Now calculate the linear correlation between x and y
# for each group
# Heavily stolen from:
# http://www.students.ncl.ac.uk/tom.holderness/software/pythonlinearfit
#z = np.polyfit(x_i,y_i,1)
#p = np.poly1d(z)
#fit = p(x_i)
#c_x = [np.min(x_i),np.max(x_i)]
#c_y = [p(np.min(x_i)), p(np.max(x_i))]
df2 = pd.DataFrame({ 'x' : x_i, 'y' : y_i })
df2.sort('x', inplace=True)
lm = ols(formula, df2).fit()
ps = [ '{:2.4f}'.format(p) for p in lm.pvalues[1:] ]
print ' {}, r2 = {}, p(s) = {}'.format(g_i, lm.rsquared, ', '.join(ps))
prstd, iv_l, iv_u = wls_prediction_std(lm)
iv_l = np.array(iv_l)
iv_u = np.array(iv_u)
fit_y = np.array(lm.fittedvalues)
st, data, ss2 = summary_table(lm, alpha=0.05)
predict_mean_ci_low, predict_mean_ci_upp = data[:,4:6].T
#pl.plot(x, y, 'k-')
#pl.plot(x, fit_y, 'r--')
#pl.fill_between(x, iv_l, iv_u, alpha=0.2)
# Get the r and p values
#r, p = pearsonr(x_i, y_i)
#label = '{} r: {: .2g} p: {: .2g}'.format(g_i, r, p)
# Now plot
ax.plot(df2.x.values, fit_y, c=c_i, linestyle = '-', linewidth = ms/25.0, zorder=6*i, label=g_i)
ax.plot(df2.x.values, predict_mean_ci_low, c=c_i, linestyle = '-', linewidth = ms/50.0, zorder=3*i)
ax.plot(df2.x.values, predict_mean_ci_upp, c=c_i, linestyle = '-', linewidth = ms/50.0, zorder=2*i)
ax.fill_between(df2.x.values, predict_mean_ci_upp, predict_mean_ci_low, alpha=0.3, facecolor=c_i, interpolate=True, zorder=1*i)
if legend:
# Add the legend
leg = ax.legend(loc=legend_loc, fancybox=True, fontsize=ms/2.)
leg.get_frame().set_alpha(0)
# Set the y limits
# This is to deal with very small numbers (the MaxNLocator gets all turned around!)
# Concatenate all the y data:
y_all = y[0]
if len(y) > 1:
for k in range(1,len(y)):
y_all = np.concatenate([y_all, y[k]])
max_y = np.max(y_all)
min_y = np.min(y_all)
buffer = ( max_y - min_y ) / 10
upper = max_y + buffer
lower = min_y - buffer
ax.set_ybound(upper, lower)
# Set the axis labels
ax.set_ylabel(labels[1], fontsize=ms/2.0)
ax.set_xlabel(labels[0], fontsize=ms/2.0)
for item in (ax.get_xticklabels() + ax.get_yticklabels()):
item.set_fontsize(ms/2.0)
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
ax.yaxis.major.formatter.set_powerlimits((-3,3))
plt.rc('font', **{'size':ms/2.0})
if title:
# Set the overall title
ax.set_title(title)
plt.tight_layout()
return ax
def plot_swe(run_id, met_inp, which_model, hydro_years_to_take, catchment,
output_dem, origin, model_swe_sc_threshold, mask_file,
dsc_snow_output_folder, plot_folder):
bounding = 'moving'
lats = np.linspace(
48e5, 50e5, 365
) # asssume plot is 5e5 high, 4e5 wide lats = np.linspace(47e5, 52e5, 365) # asssume plot is 5e5 high, 4e5 wide
lons = np.linspace(11e5, 12e5,
365) # lons = np.linspace(10e5, 15e5, 365)
camera_motion = [lats, lons]
plt.rcParams.update({'font.size': 14})
plt.rcParams.update({'axes.titlesize': 14})
# bin_edges = [-0.001, 30, 60, 90, 120, 180, 270, 360] # use small negative number to include 0 in the interpolation
for i, year_to_take in enumerate(hydro_years_to_take):
modis_mask = np.load(mask_file)
fig1 = plt.figure(figsize=[8, 6])
print('loading data for year {}'.format(year_to_take))
nc_file = nc.Dataset(
model_output_folder + '/snow_out_{}_{}_{}_{}_{}_{}.nc'.format(
met_inp, which_model, catchment, output_dem, run_id,
year_to_take), 'r')
nztm_dem = nc_file.variables['elevation'][:]
x_centres = nc_file.variables['easting'][:]
y_centres = nc_file.variables['northing'][:-116]
out_dt = nc.num2date(
nc_file.variables['time'][:], nc_file.variables['time'].units
) #, only_use_cftime_datetimes=False, only_use_python_datetimes=True
for i in range(nc_file.variables['swe'].shape[0]):
swe = np.log(nc_file.variables['swe'][i, :-116, :])
swe[np.isinf(swe)] = 0 # take for NZ
swe[modis_mask == False] = np.nan
CS1 = plt.pcolormesh(x_centres,
y_centres,
swe,
cmap=copy.copy(plt.cm.get_cmap('viridis')),
vmin=1.61,
vmax=8.52) #levels=bin_edges, extend='max'
#CS1.cmap.set_bad('grey')
#CS1.cmap.set_under('grey')
#CS1.cmap.set_under('grey')
plt.gca().set_aspect('equal')
# plt.imshow(modis_scd, origin=0, interpolation='none', vmin=0, vmax=365, cmap='magma_r')
plt.xticks([])
plt.yticks([])
cbar = plt.colorbar(CS1, ticks=np.log([5, 50, 500, 5000]))
cbar.set_ticklabels([5, 50, 500, 5000])
cbar.set_label('Snow water equivalent (mm w.e.)', rotation=90)
plt.xticks(np.arange(12e5, 21e5, 2e5))
plt.yticks(np.arange(48e5, 63e5, 2e5))
if bounding == 'moving':
plt.ylim((camera_motion[0][i], camera_motion[0][i] + 4e5))
plt.xlim((camera_motion[1][i], camera_motion[1][i] + 5e5))
plt.ticklabel_format(axis='both', style='sci', scilimits=(0, 0))
plt.ylabel('NZTM northing')
plt.xlabel('NZTM easting')
plt.title('SWE {}'.format(out_dt[i]))
plt.tight_layout()
plt.savefig(
plot_folder + '/SWE model {} thres{} {} {} {} {}.png'.format(
year_to_take, model_swe_sc_threshold, run_id, met_inp,
which_model, i),
dpi=150)
# plt.show()
plt.clf()
return new_vector
ax = plt.subplot(111)
box = ax.get_position()
ax.set_position([box.x0+0.08, box.y0, box.width*0.95, box.height])
#r = scipy.zeros(10)
rlist= np.array([0.0001, 0.0005, 0.001, 0.005, 0.01, 0.05, 0.1, 0.5, 1])
# rlist= [0.0001, 0.0005, 0.001, 0.005, 0.01, 0.05, 0.1, 0.5, 1, 1.1]
bias_sq_rlist = scipy.zeros(len(rlist))
for r_i in range(0, len(rlist)):
# bias_sq_rlist[r_inv-1] = norm(resize( np.loadtxt('Jv_dx=e-2_r_inv=%d.out' %r_inv) , bins) - Jv_sde )**2 Jv_dx=e-2_r=%d.out
bias_sq_rlist[r_i] = norm(resize( np.loadtxt('Jv_dx=e-2_r=%.3f.out' %rlist[r_i]) , bins) - Jv_sde )**2
rlist =rlist/10000
# r[r_inv-1]= 1.0/r_inv
plt.plot( rlist, bias_sq_rlist /bins, label ='$\Delta x = 10^{-2} $', linewidth=2 )
plt.xlabel('$\Delta t$', fontsize = 14)
plt.ylabel(r'$\left(\hat{\mathbf{Bias}}(\mathbf{\hat{Jv}} , \mathbf{Jv}_{FP} \right))^2$' , fontsize = 15)
# plt.xscale(log_flag)
# plt.yscale(log_flag)
# plt.ticklabel_format(style='sci', scilimits=(0,10))
# plt.ticklabel_format(style='sci')
plt.ticklabel_format(useOffset=False, axis='y')
plt.savefig('plots/ftcs_checkup_linear_in_delta_t.pdf')
plt.show()
Y.append(np.mean(D[i]))
X.append(i)
Y_err.append(np.std(D[i]))
yy.append(np.sum(D[i]))
X = np.array(X)
Y = np.array(Y)
Y_err = np.array(Y_err)
# los datos estan el microsegundo, entonces lo pasamos a mili multiplicando por 10^-3
plt.figure(figsize=(8, 4))
plt.errorbar(X, Y, Y_err, color="firebrick")
plt.scatter(X, Y, color="navy")
# plt.plot(X,Y)
plt.title("Tiempo del algoritmo en funcion de la particion")
plt.xlabel("Particion")
plt.ylabel("Tiempo de computo")
plt.ticklabel_format(style="sci", axis="y", scilimits=(0, 3))
plt.tight_layout()
plt.savefig("Grafica_tiempo.pdf")
plt.close()
plt.figure(figsize=(8, 4))
plt.plot(X, yy, color="slateblue")
plt.scatter(X, yy, color="firebrick")
plt.title("Tiempo total del algoritmo en funcion de la particion")
plt.xlabel("Particion")
plt.ylabel("Tiempo total de computo")
plt.ticklabel_format(style="sci", axis="y", scilimits=(0, 3))
plt.tight_layout()
plt.savefig("Graf_tiempo_total.pdf")
plt.close()
plt.subplots_adjust(left=0.075, right=0.95, top=0.9, bottom=0.25)
colors = ['mediumpurple', 'gold', 'limegreen']
for i in range(len(data_1)):
for j in range(1, len(data_1[0])):
if (i == 0):
ax1.bar(10 * ind[i] + width * j,
data_1[idx[i], j],
width,
color=colors[j - 1],
label=algos_name[j - 1])
else:
ax1.bar(10 * ind[i] + width * j,
data_1[idx[i], j],
width,
color=colors[j - 1])
ax1.legend(loc='best', fontsize=26)
ax1.set_xlabel("Number of points computed", fontsize=25)
ax1.set_ylabel("Running time (ms)", fontsize=25)
ax1.set_title("Performances Comparisons of Point in Polygon algorithms",
fontsize=26)
ax1.set_xlim(-5 + width, len(data_1) + 90 + width)
ax1.set_xticks(ind + width)
plt.ticklabel_format(useOffset=True, style='sci', axis='y')
plt.xticks(np.linspace(0, 90, num=10) + 4.1,
np.linspace(2500, 25000, num=10).astype(int),
rotation=0,
fontsize=20)
plt.yticks(rotation=0, fontsize=20)
plt.ticklabel_format(axis='y', style='sci', scilimits=(0, 1))
fig.savefig("Grafico_belloWI_CN.png")
plot_data = []
plot_data.append(np.array(sir).flatten())
for step in range(365):
#print(infected)
contact = contact_rate(int(sir[0]),int(sir[1]),step )
P = transition_probability(contact,sir)
#print (P)
result = sir * P
sir = result.tolist()[0]
print(step,sir)
plot_data.append(np.array(result).flatten())
#print(sir[1] - infected_earlier)
# Convert the data format
plot_data = np.array(plot_data)
# Create the plot
#plt.plot(plot_data[:, 0], label='S(t)')
plt.plot(plot_data[:, 1], label='I(t)')
plt.plot(plot_data[:, 2], label='D(t)')
plt.plot(plot_data[:, 3], label='R(t)')
plt.legend()
plt.xlabel('T')
plt.ylabel('N')
# use scientific notation
plt.ticklabel_format(style='sci', axis='y', scilimits=(0,0))
plt.show()
def plot_by_locs(data, output_name, colors, shapes, sub_ids, loc_ids, locs, roi_name, figsize=(15,5)):
"""
Plot_by_locs takes a data rec_array and loops through three measures:
fa, md, and vol_vox and plots each on separate plots with the
x-axis representing the different locations
Required: data rec_array (eg: data)
output_name (eg: results_dir/'plot_by_subs.png')
colors (eg: colors)
shapes (eg: shapes)
sub_ids (eg: sub_ids)
loc_ids (eg: loc_ids)
locs (eg: locs)
Optional: figsize (default 15 x 5)
Example usage:
plot_by_locs(data=data, output_name=results_dir/'plot_by_subs.png',
colors=colors, shapes=shapes, sub_ids=sub_ids,
loc_ids=loc_ids, locs=locs, figsize=(15,5))
"""
#==========================================================================
import numpy as np
import matplotlib.pylab as plt
from matplotlib.ticker import MaxNLocator
#==========================================================================
# Set up the figure
fig = plt.figure(figsize=(15,5))
ax1 = plt.subplot(131) # FA axis
ax2 = plt.subplot(132) # MD axis
ax3 = plt.subplot(133) # volume axis
ax = [ax1, ax2, ax3]
# Loop through the three measures (FA, MD, VOL_VOX)
for count, measure in enumerate(['fa', 'md', 'vol_vox']):
# Now loop through the subjects
for i, sub in enumerate(sub_ids):
# First things first, we want to set up a new numpy array
# that will hold the mean values for each location so we
# can plot a line through them at the end
mean_array = np.zeros(3)
for j, loc in enumerate(loc_ids):
# Assign the correct color and shape for the marker
c=colors[j,i]
m=shapes[j]
# Mask the data so you only have this sub at this loc's numbers
mask = ( data['sub'] == sub ) & ( data['loc_id']== loc )
# Find the number of data points you have for this sub at this location
n = np.sum(mask)
if n > 1:
# If you have more than one data point then we're going to plot
# the individual points (kinda small and a little transparent)
ax[count].scatter(np.ones(n)*loc, data[measure][mask],
c=c, edgecolor=c,
marker=m, s=20, alpha=0.5 )
# ... connect them with a line ...
#ax[count].plot(np.ones(n)*loc, data[measure][mask], c=c)
# And for everyone we'll plot the average
# (which is just the data if you only have one point)
mean = np.average(data[measure][mask])
mean_array[j] = mean # Update the mean_array for plotting later!
ax[count].scatter(loc, mean,
c=c, edgecolor=c,
marker=m, s=50 )
# Now that we've filled up the mean_array let's plot it :)
c=colors[3,i]
ax[count].plot(loc_ids, mean_array, c=c, zorder=0)
# Set the y limits
# This is to deal with very small numbers (the MaxNLocator gets all turned around!)
buffer = ( np.max(data[measure]) - np.min(data[measure]) ) / 10
upper = np.max(data[measure]) + buffer
lower = np.min(data[measure]) - buffer
ax[count].set_ybound(upper, lower)
# Set the axis labels
ax[count].set_ylabel('{}'.format(measure.upper()))
ax[count].set_xlabel('Scanner Location')
# And label the x axis with the scanner locations
ax[count].set_xticklabels(locs)
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
[ a.yaxis.major.formatter.set_powerlimits((-3,3)) for a in ax ]
# Adjust the y axis ticks so that there are 6 at sensible places
[ a.yaxis.set_major_locator(MaxNLocator(6)) for a in ax ]
# Set the x axis ticks to be at the loc_ids
[ a.set_xticks(loc_ids) for a in ax ]
# Set the overall title
fig.suptitle('Region of interest: {}'.format(roi_name), fontsize=20)
plt.subplots_adjust(top=0.85)
# And now save it!
plt.savefig(output_name, bbox_inches=0, facecolor='w', edgecolor='w', transparent=True)
fig, ax = plt.subplots(1)
#ax.yaxis.set_label_position("right")
for dsys in ['linux_tuned_joule', 'linux_tuned_tail']:
ddf = ddfs[dsys][0]
ddfn = ddfs[dsys][1]
ddfn = ddfn[(ddfn['instructions_diff'] > 0)
& (ddfn['instructions_diff'] < 250000000)]
plt.plot(ddfn['timestamp_non0'],
ddfn['instructions_diff'],
HATCHS[dsys],
label=LABELS[dsys],
c=COLORS[dsys],
alpha=0.5)
plt.xlabel("Time (secs)")
plt.ylabel("Instructions")
plt.ticklabel_format(axis="y", style="sci", scilimits=(0, 0))
plt.legend(markerscale=3, loc='upper right')
plt.grid()
plt.tight_layout()
#plt.savefig(f'mcd_linux_{QPS}_instructions_timeline.png')
#### bar plot
metric_labels = [
'CPI', 'Instructions', 'Cycles', 'RxBytes', 'TxBytes', 'Interrupts'
]
N_metrics = len(metric_labels) #number of clusters
N_systems = 3 #number of plot loops
fig, ax = plt.subplots(1)
idx = np.arange(N_metrics) #one group per metric
width = 0.2
data_dict = {}
# In[3]:
np.random.seed(1234) #Set random seed for reproducibility
N_rand = N * (1 + np.random.normal(scale=0.1, size=len(N))
) #Add some error to data
# Here's what the data look like:
# In[4]:
plt.plot(t, N_rand, 'r+', markersize=15, markeredgewidth=2, label='Data')
plt.xlabel('t', fontsize=20)
plt.ylabel(r'$N$', fontsize=20)
plt.ticklabel_format(style='scientific', scilimits=[0, 3])
plt.yscale('log')
# ## Fitting a Linear model to the data
# Lets start with the simplest case; a linear model.
#
# \begin{equation*}\label{eq:linear_model}
# N_t = at^3 + bt^2 + ct + d
# \end{equation*}
#
# where $a$, $b$, $c$ and $d$, are phenomenological parameters.
# ### Using NLLS
# In[5]:
vv[timestamps[i]] += 1
fs = 1e6
L = vv.shape[0]
vv = vv - np.sum(vv)/L
NFFT = int(2**np.ceil(np.log2(L)))
ff = np.fft.fft(vv, NFFT)/L
f = fs/2*(np.arange(NFFT/2)/float(NFFT/2))
f_draw = f
ff_draw = 2*np.abs(ff[:NFFT/2])
plt.figure(figsize=(50, 45))
plt.xlim([0, 100])
plt.plot(f_draw, ff_draw, 'b', linewidth=10)
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.xticks(np.arange(0, 100+1, 20))
plt.yticks(np.arange(0, 1.8e-1+0.3e-1, 0.3e-1))
plt.xlabel("Frequency [Hz]", fontsize=150)
plt.savefig(vot_save_path, format="eps", dpi=1200,
bbox_inches='tight', pad_inches=0.5)
print("[MESSAGE] Amplitude Spectrum is saved at %s" % (vot_save_path))
elif option == "tracking-as":
tracking_fn = "INI_TrackingDataset_30fps_20160424.hdf5"
tracking_path = os.path.join(data_path, tracking_fn)
tracking_db = h5py.File(tracking_path, mode="r")
tracking_stats_path = os.path.join(stats_path, "tracking_stats.pkl")
tracking_save_path = os.path.join(data_path, "tracking_as.eps")
f = file(tracking_stats_path, mode="r")
tracking_stats = pickle.load(f)
def run_RF_trip_experiment(Tmax, test_file):
# Import JSON parser module
from get_configuration import Get_SWIG_Cryomodule
cryo_object, Tstep, fund_mode_dicts = Get_SWIG_Cryomodule(test_file,
Verbose=False)
# Create time vector
trang = np.arange(0, Tmax, Tstep)
# Number of points
nt = len(trang)
# Initialize vectors for test
cav_v = np.zeros(nt,
dtype=np.complex) # Overall cavity accelerating voltage
E_reverse = np.zeros(nt, dtype=np.complex)
Kg = np.zeros(nt, dtype=np.complex)
delta_omega = np.zeros(nt, dtype=np.double)
# Manually set the controller set-point
# FPGA controller will be operating in open-loop mode,
# which is equivalent to driving the cavity with the set-point value
# cryo_object.station_list[0].C_Pointer.fpga.set_point = 30.0
# cryo_object.station_list[0].State.fpga_state.openloop = 1
# Get a C pointer to the Electrical Mode State to record its detune frequency
elecMode_state = acc.ElecMode_State_Get(
cryo_object.station_list[0].State.cav_state, 0)
# Run Numerical Simulation
for i in xrange(1, nt):
# Run Cryomodule Step function
acc.Cryomodule_Step(cryo_object.C_Pointer, cryo_object.State, 0.0, 0.0)
# Record some waveforms
# Cavity state
cav_v[i] = cryo_object.station_list[0].State.cav_state.V
E_reverse[i] = cryo_object.station_list[0].State.cav_state.E_reverse
Kg[i] = cryo_object.station_list[0].State.cav_state.Kg
# pi-mode's detune frequency [rad/s]
delta_omega[i] = elecMode_state.delta_omega
# Make some calculations for plots
# Mode's bandwidth
omega_f = fund_mode_dicts[0]['bw']
# Derivative of the cavity field
cav_v_der = np.diff(cav_v, 1) / Tstep
factor = 1 - 1j * delta_omega / omega_f
# Calculate waveforms with corresponding factors to equate units in order to plot together
x2 = cav_v_der / omega_f
x3 = np.multiply(cav_v, factor)
# Plot cavity signals
plt.plot(trang * 1e6,
np.abs(Kg),
'-',
label=r'Forward ($\vec K_{\rm g}$)',
linewidth=2)
plt.plot(trang * 1e6,
np.abs(cav_v) * 1e-4,
'-',
label=r'Cavity ($\vec V_{\pi}\times \, 10^{-4}$)',
linewidth=2)
plt.plot(trang * 1e6,
np.abs(E_reverse),
'-',
label=r'Reverse ($\vec E_{\rm reverse}$)',
linewidth=2)
plt.title('Cryomodule Test', fontsize=40, y=1.01)
plt.xlabel(r'Time [$\rm \mu s$]', fontsize=30)
plt.ylim(0, 60)
plt.ylabel('Amplitude [V]', fontsize=30)
plt.legend(loc='upper right')
plt.rc('font', **{'size': 25})
plt.show()
plt.figure()
# Plot detune frequency vs time
plt.title('Detune Frequency', fontsize=40, y=1.01)
plt.plot(trang * 1e6,
1.9e-7 * np.square(np.abs(cav_v)) / 2.0 / np.pi,
'-',
label=r'$k_{\rm L}|\vec V_{\pi}|^{\rm 2}$',
linewidth=2)
plt.plot(trang * 1e6,
-delta_omega / 2.0 / np.pi,
'-',
label=r'$-\Delta f_{\pi}$',
linewidth=2)
plt.ylabel('Frequency [Hz]', fontsize=30)
plt.xlabel(r'Time [$\rm \mu s$]', fontsize=30)
plt.legend(loc='upper right')
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.ylim(0, 8e3)
plt.show()
# Plot cavity signals in complex plane
dpi = 100
f = plt.figure(figsize=(1400 / dpi, 1350 / dpi), dpi=dpi)
x = f.gca()
x.set_aspect("equal")
plt.title(r'$\pi$-mode in Volts', fontsize=40, y=1.01)
x.plot(np.real(cav_v),
np.imag(cav_v),
'-',
label=r'Cavity ($\vec V_{\pi}$)',
linewidth=2)
x.plot(np.real(x2),
np.imag(x2),
'-',
label=r'$\omega_{\rm f}\times \, \frac{d\vec V_{\pi}}{dt}$',
linewidth=2)
x.plot(
np.real(x3),
np.imag(x3),
'-',
label=r'$\left( 1-j\omega_{\rm d}/\omega_{\rm f}\right) \vec V_{\pi}$',
linewidth=2)
x.set_ylabel(r'$\Im$ [V]', fontsize=30)
x.set_xlabel(r'$\Re$ [V]', fontsize=30)
x.set_xlim(-7e5, 7e5)
x.set_ylim(-7e5, 7e5)
x.ticklabel_format(style='sci', axis='both', scilimits=(0, 0))
x.legend(loc='upper right')
plt.show()
plt.figure()
def plot_by_locs(data,
output_name,
colors,
shapes,
sub_ids,
loc_ids,
locs,
roi_name,
figsize=(15, 5)):
"""
Plot_by_locs takes a data rec_array and loops through three measures:
fa, md, and vol_vox and plots each on separate plots with the
x-axis representing the different locations
Required: data rec_array (eg: data)
output_name (eg: results_dir/'plot_by_subs.png')
colors (eg: colors)
shapes (eg: shapes)
sub_ids (eg: sub_ids)
loc_ids (eg: loc_ids)
locs (eg: locs)
Optional: figsize (default 15 x 5)
Example usage:
plot_by_locs(data=data, output_name=results_dir/'plot_by_subs.png',
colors=colors, shapes=shapes, sub_ids=sub_ids,
loc_ids=loc_ids, locs=locs, figsize=(15,5))
"""
#==========================================================================
import numpy as np
import matplotlib.pylab as plt
from matplotlib.ticker import MaxNLocator
#==========================================================================
# Set up the figure
fig = plt.figure(figsize=(15, 5))
ax1 = plt.subplot(131) # FA axis
ax2 = plt.subplot(132) # MD axis
ax3 = plt.subplot(133) # volume axis
ax = [ax1, ax2, ax3]
# Loop through the three measures (FA, MD, VOL_VOX)
for count, measure in enumerate(['fa', 'md', 'vol_vox']):
# Now loop through the subjects
for i, sub in enumerate(sub_ids):
# First things first, we want to set up a new numpy array
# that will hold the mean values for each location so we
# can plot a line through them at the end
mean_array = np.zeros(3)
for j, loc in enumerate(loc_ids):
# Assign the correct color and shape for the marker
c = colors[j, i]
m = shapes[j]
# Mask the data so you only have this sub at this loc's numbers
mask = (data['sub'] == sub) & (data['loc_id'] == loc)
# Find the number of data points you have for this sub at this location
n = np.sum(mask)
if n > 1:
# If you have more than one data point then we're going to plot
# the individual points (kinda small and a little transparent)
ax[count].scatter(np.ones(n) * loc,
data[measure][mask],
c=c,
edgecolor=c,
marker=m,
s=20,
alpha=0.5)
# ... connect them with a line ...
#ax[count].plot(np.ones(n)*loc, data[measure][mask], c=c)
# And for everyone we'll plot the average
# (which is just the data if you only have one point)
mean = np.average(data[measure][mask])
mean_array[
j] = mean # Update the mean_array for plotting later!
ax[count].scatter(loc, mean, c=c, edgecolor=c, marker=m, s=50)
# Now that we've filled up the mean_array let's plot it :)
c = colors[3, i]
ax[count].plot(loc_ids, mean_array, c=c, zorder=0)
# Set the y limits
# This is to deal with very small numbers (the MaxNLocator gets all turned around!)
buffer = (np.max(data[measure]) - np.min(data[measure])) / 10
upper = np.max(data[measure]) + buffer
lower = np.min(data[measure]) - buffer
ax[count].set_ybound(upper, lower)
# Set the axis labels
ax[count].set_ylabel('{}'.format(measure.upper()))
ax[count].set_xlabel('Scanner Location')
# And label the x axis with the scanner locations
ax[count].set_xticklabels(locs)
# Adjust the power limits so that you use scientific notation on the y axis
plt.ticklabel_format(style='sci', axis='y')
[a.yaxis.major.formatter.set_powerlimits((-3, 3)) for a in ax]
# Adjust the y axis ticks so that there are 6 at sensible places
[a.yaxis.set_major_locator(MaxNLocator(6)) for a in ax]
# Set the x axis ticks to be at the loc_ids
[a.set_xticks(loc_ids) for a in ax]
# Set the overall title
fig.suptitle('Region of interest: {}'.format(roi_name), fontsize=20)
plt.subplots_adjust(top=0.85)
# And now save it!
plt.savefig(output_name,
bbox_inches=0,
facecolor='w',
edgecolor='w',
transparent=True)
model_scd = model_scd[:, 20:]
model_scd[nztm_dem == 0] = np.nan
CS1 = plt.contourf(x_centres,
y_centres,
model_scd,
levels=bin_edges,
cmap=copy.copy(plt.cm.get_cmap('magma_r')),
extend='max')
# CS1.cmap.set_bad('grey')
CS1.cmap.set_over([0.47, 0.72, 0.77])
# CS1.cmap.set_under('none')
plt.gca().set_aspect('equal')
# plt.imshow(modis_scd, origin=0, interpolation='none', vmin=0, vmax=365, cmap='magma_r')
plt.xticks([])
plt.yticks([])
cbar = plt.colorbar()
cbar.set_label('Snow cover duration (days)', rotation=90)
plt.xticks(np.arange(12e5, 17e5, 2e5))
plt.yticks(np.arange(50e5, 55e5, 2e5))
plt.ticklabel_format(axis='both', style='sci', scilimits=(0, 0))
plt.ylabel('NZTM northing')
plt.xlabel('NZTM easting')
plt.title('Snow cover duration {}'.format(year_to_take))
plt.tight_layout()
plt.savefig(plot_folder + '/SCD model {} thres{} {} {} {}.png'.format(
year_to_take, model_swe_sc_threshold, run_id, met_inp, which_model),
dpi=300)
plt.show()
plt.close()
def plot_data(directory='./data/',
data_type="bsf",
nbytes=4,
average=False,
ax=None):
"""
Plots either the Best-so-far (BSF) fitness or the average fitness per
population.
Args:
directory (string): The full path to the directory the data are stored
data_type (string): bsf-for best-so-far fitness or average_fitness for
the average fitness per population
nbytes (int): Number of bytes of the encoding. Default is 4 (int
or float). Use 8 for double or long int.
average (bool): If enabled (True) averages the fitness records over
all individuals.
ax (obj): A subplot object in case one would like to use
subplots or grids.
Returns:
"""
if os.path.isdir(directory) is not True:
print("Directory does not exist!")
sys.exit(-1)
fnames = glob.glob(directory+'/*.dat')
i = 0
data = []
for name in fnames:
if data_type in name:
with open(name, 'rb') as f:
c = f.read()
if nbytes == 4:
tmp = np.array(unpack('f'*(len(c)//4), c), 'f')
elif nbytes == 8:
tmp = np.array(unpack('d'*(len(c)//8), c), 'd')
else:
print("Number of bytes is not valid!")
sys.exit(-1)
data.append(tmp)
data = np.array(data)
if average:
average_fit = data.mean(axis=0)
if ax is None:
fig = plt.figure(figsize=(9, 5))
fig.subplots_adjust(bottom=0.2, left=0.2)
ax = fig.add_subplot(111)
if average:
ax.plot(average_fit, lw=2)
else:
for i in range(len(data)):
ax.plot(data[i], lw=2)
plt.ticklabel_format(axis="y", style='sci')
# ax.set_ylim([data.min(), 0])
ax.set_xlabel("Generations", fontsize=16, weight='bold')
if data_type == "bsf":
ax.set_ylabel("BSF", fontsize=16, weight='bold')
else:
ax.set_ylabel("Average fitness", fontsize=16, weight='bold')
ticks = ax.get_xticks().astype('i')
ax.set_xticklabels(ticks, fontsize=16, weight='bold')
ticks = np.round(ax.get_yticks(), 6)
ax.set_yticklabels(ticks, fontsize=16, weight='bold')
ax.plot3D(x, y, z, 'c' , label ='Orbita')
plt.plot( [0,0], [0,Atmosfera], '-', c='k')
plt.plot( [0,0], [0,-Atmosfera], '-', c='k')
plt.plot( [0,Atmosfera], [0,0], '-', c='k')
plt.plot( [0,-Atmosfera], [0,0], '-', c='k')
ax.plot3D(cx, cy, cz, 'peru' , alpha = 0.2, label = 'Tierra')
plt.plot( cx2 , cy2 , c = 'salmon' , label = 'Atmosfera') #Atmosfera
plt.grid()
plt.ylabel ('Y (m)' , fontweight = 'bold')
plt.xlabel ('X (m)', fontweight = 'bold' )
plt.title("Satelite A", fontweight = 'bold')
plt.ticklabel_format(useOffset = False, style = 'plain')
plt.tight_layout()
plt.legend()
plt.savefig('Satelite 3D' ,dpi = 300)
plt.show()
# ----------Grafico 2D Tierra, Orbita y Atmosfera -----------
fig = plt.figure(2)
Atmosfera = Rt + 80*km
# Hago la Tierra en 2D
def print_plybook(self,
filename='plybook',
vmode='stack',
include_materials=False,
slim=[],
add_filename=False,
add_page=False):
''' Prints a PDF file for layup visualization.
:param filename: name of the PDF
:param vmode: 'stack' or 'explode' visualization of layup
:param include_materials: True if materials should be included (runs only
when check_consistency() is OK)
:param slim: [slim_lower, slim_upper] limits the x axis of the plots
:param add_filename: if True filename is added to each plot
:param add_page: if True page number of plybook is added to each plot
'''
import matplotlib.pylab as plt
import matplotlib.patches as patches
from matplotlib.backends.backend_pdf import PdfPages
pb = PdfPages(filename + '.pdf')
cm = plt.get_cmap('jet')
# create material color dict (necessary for the case that materials list
# is longer than 7)
start = 0.2
stop = 1.0
number_of_lines = len(self.materials)
mat_colors = [cm(x) for x in np.linspace(start, stop, number_of_lines)]
cm_dict = {}
for i, m in enumerate(self.materials.iterkeys()):
cm_dict[m] = mat_colors[i]
page_pos_x = 0.98
page_pos_y = 0.02
filename_pos_x = 0.02
filename_pos_y = 0.02
if include_materials:
# material properties
fig, _ = plt.subplots()
plt.title('MATPROPS')
N = 10
ind = np.arange(N) # the x locations for the groups
# the width of the bars: can also be len(x) sequence
width = 1.0 / N
for i, mat_name in enumerate(self.materials.iterkeys()):
plt.bar(ind + i * width,
self.materials[mat_name].matprops()[0],
width,
color=cm_dict[mat_name],
label=mat_name,
log=1)
if i == 1:
matprops_labels = self.materials[mat_name].matprops()[1]
plt.xticks(ind + .5, matprops_labels)
plt.legend(loc='best', prop={'size': 10}, framealpha=0.5)
# add page number and filename to figure
if add_page:
fig.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig() # save fig to plybook
# failmat_stress
fig, _ = plt.subplots()
plt.title('FAILMAT_STRESS')
N = 9
ind = np.arange(N) # the x locations for the groups
# the width of the bars: can also be len(x) sequence
width = 1.0 / N
for i, mat_name in enumerate(self.materials.iterkeys()):
plt.bar(ind + i * width,
self.materials[mat_name].failmat()[0][:N],
width,
color=cm_dict[mat_name],
label=mat_name,
log=1)
if i == 1:
matprops_labels = self.materials[mat_name].failmat()[1]
plt.xticks(ind + .5, matprops_labels[:N])
plt.legend(loc='best', prop={'size': 10}, framealpha=0.5)
# add page number and filename to figure
if add_page:
fig.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig() # save fig to plybook
# failmat_strain
fig, _ = plt.subplots()
plt.title('FAILMAT_STRAIN')
N = 9
ind = np.arange(N) # the x locations for the groups
# the width of the bars: can also be len(x) sequence
width = 1.0 / N
for i, mat_name in enumerate(self.materials.iterkeys()):
plt.bar(ind + i * width,
self.materials[mat_name].failmat()[0][N:2 * N],
width,
color=cm_dict[mat_name],
label=mat_name)
if i == 1:
matprops_labels = self.materials[mat_name].failmat()[1]
plt.xticks(ind + .5, matprops_labels[N:2 * N])
plt.ticklabel_format(style='sci', axis='y', scilimits=(0, 0))
plt.legend(loc='best', prop={'size': 10}, framealpha=0.5)
# add page number and filename to figure
if add_page:
fig.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig() # save fig to plybook
# failmat_safety
fig, _ = plt.subplots()
plt.title('FAILMAT_SAFETY')
N = 5
ind = np.arange(N) # the x locations for the groups
# the width of the bars: can also be len(x) sequence
width = 1.0 / 9
for i, mat_name in enumerate(self.materials.iterkeys()):
plt.bar(ind + i * width,
self.materials[mat_name].failmat()[0][18:18 + N],
width,
color=cm_dict[mat_name],
label=mat_name)
if i == 1:
matprops_labels = self.materials[mat_name].failmat()[1]
plt.xticks(ind + .5, matprops_labels[18:18 + N])
plt.legend(loc='best', prop={'size': 10}, framealpha=0.5)
# add page number and filename to figure
if add_page:
fig.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig() # save fig to plybook
fig, _ = plt.subplots()
plt.title('DPs')
for di, dk in enumerate(sorted(self.DPs, reverse=True)):
plt.plot(self.s, self.DPs[dk].arc, label=dk[-2:])
plt.legend(loc='best', prop={'size': 6}, bbox_to_anchor=(1, 1))
# draw station lines
for s in self.s:
plt.plot([self.s, self.s], [-1, 1], 'k', linewidth=0.5)
if slim:
plt.xlim((slim[0], slim[1]))
# add page number and filename to figure
if add_page:
fig.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig() # save fig to plybook
def _region_sets(reg_type):
''' Compares all regions of reg_type and creates a list of unique reg_types
:param reg_type: self.regions or self.webs or self.bonds
:return: list: unique region sets
'''
# list of rthicks and region cum thicknesses
rthicks = []
rmaxthicks = []
for i, rv in enumerate(reg_type.itervalues()):
# init thicknesses
rv.init_stack()
rthicks.append(rv.thick_matrix)
rmaxthicks.append(np.sum(rv.thick_max))
# maximum thickness of sets
rmaxthick = np.max(rmaxthicks)
# check for identic regions
rsets = []
for rt0 in rthicks:
i0_idents = []
for i, rt in enumerate(rthicks):
if np.array_equal(rt0, rt):
i0_idents.append(i)
rsets.append(i0_idents)
# remove duplicate entries
rsets = map(list, OrderedDict.fromkeys(map(tuple, rsets)))
return rsets, rmaxthick
def _plot_region(rsets, reg_type):
''' Adds plots of region sets to plybook
:param rsets: list of region sets
:param reg_type: self.regions or self.webs or self.bonds
'''
if reg_type == self.regions:
rtype = 'region'
elif reg_type == self.webs:
rtype = 'web'
elif reg_type == self.bonds:
rtype = 'bond'
for rset in rsets:
r = reg_type['%s%02d' % (rtype, rset[0])]
fig1, ax1 = plt.subplots()
#fig1 = plt.figure()
#ax1 = fig1.add_subplot(111)
plt.title(rtype.upper() + ' ' + str(rset))
# draw station lines
for s in self.s:
ax1.plot([self.s, self.s], [0, maxthick],
'k',
linewidth=0.5)
t = np.zeros_like(self.s)
for k, l in r.layers.iteritems():
mat_name = k[:-2]
mat_count = k[-2:]
if vmode == 'stack':
# draw layer box
plt.plot(self.s, t + l.thickness, 'k')
# draw layer thickness distro
plt.fill_between(self.s,
t,
t + l.thickness,
color=cm_dict[mat_name],
label=mat_name if int(mat_count) == 0
else "_nolegend_")
t = t + l.thickness
elif vmode == 'explode':
# check for layer drops
drops = []
drop_prev = 0
for s, thick in enumerate(l.thickness):
if t[s] + thick > t[s]:
drop = 1
else:
drop = 0
if drop != drop_prev and drop_prev == 0:
drops.append(s)
elif drop != drop_prev and drop_prev == 1:
drops.append(s - 1)
drop_prev = drop
if len(drops) == 1:
drops.append(len(l.thickness) - 1)
max_thick = np.max(l.thickness)
# draw layer box
for di in range(len(drops) - 1):
# draw box per layer
north_west = [
self.s[drops[di]], t[drops[di]] + max_thick
]
south_west = [self.s[drops[di]], t[drops[di]]]
north_east = [
self.s[drops[di + 1]],
t[drops[di + 1]] + max_thick
]
south_east = [
self.s[drops[di + 1]], t[drops[di + 1]]
]
if drops[di] > 0: # we have a plydrop up
north_west = [
self.s[drops[di] - 1],
t[drops[di]] + max_thick
]
south_west = [
self.s[drops[di] - 1], t[drops[di]]
]
south_south_west = [
self.s[drops[di]], t[drops[di]]
]
north_mid_west = [
self.s[drops[di]],
(t + l.thickness)[drops[di]]
]
# draw layer thickness distro drop
ax1.add_patch(
patches.Polygon(
[
south_west, north_mid_west,
south_south_west
],
linewidth=0,
facecolor=cm_dict[mat_name]))
# we have a plydrop down
if drops[di + 1] < len(self.s) - 1:
south_east = [
self.s[drops[di + 1] + 1], t[drops[di + 1]]
]
north_east = [
self.s[drops[di + 1] + 1],
t[drops[di + 1]] + max_thick
]
south_south_east = [
self.s[drops[di + 1]], t[drops[di + 1]]
]
north_mid_east = [
self.s[drops[di + 1]],
(t + l.thickness)[drops[di + 1]]
]
# draw layer thickness distro drop
ax1.add_patch(
patches.Polygon(
[
north_mid_east, south_east,
south_south_east
],
linewidth=0,
facecolor=cm_dict[mat_name]))
ax1.add_patch(
patches.Polygon([
south_west, north_west, north_east,
south_east
],
fill=False))
# draw layer thickness distro
plt.fill_between(self.s,
t,
t + l.thickness,
where=t < t + l.thickness,
color=cm_dict[mat_name],
label=mat_name if int(mat_count) == 0
else "_nolegend_")
t = t + max_thick
plt.ylim([0, maxthick]) # set all plot limits to maxthickness
plt.legend(loc='best', prop={'size': 10}, framealpha=0.5)
if slim:
plt.xlim((slim[0], slim[1]))
# add page number and filename to figure
if add_page:
fig1.text(page_pos_x,
page_pos_y,
str(pb.get_pagecount() + 1),
ha='left',
fontsize=8)
if add_filename:
fig1.text(filename_pos_x,
filename_pos_y,
str(filename),
ha='left',
fontsize=8)
pb.savefig(fig1) # save fig to plybook
rsets, rmaxthick = _region_sets(self.regions)
wsets, wmaxthick = _region_sets(self.webs)
if hasattr(self, 'bonds'):
bsets, bmaxthick = _region_sets(self.bonds)
maxthick = np.max([rmaxthick, wmaxthick]) # , bmaxthick])
else:
maxthick = np.max([rmaxthick, wmaxthick])
_plot_region(rsets, reg_type=self.regions)
_plot_region(wsets, reg_type=self.webs)
if hasattr(self, 'bonds'):
_plot_region(bsets, reg_type=self.bonds)
pb.close() # close plybook
