def run(name, mw_switch = False):
if mw_switch:
m = pulsar_mbi_espin.ElectronRabi_Switch(name)
else:
m = pulsar_mbi_espin.ElectronRabi(name)
funcs.prepare(m)
print 'threshold =' + str(m.params['MBI_threshold'])
# m.params.from_dict(qt.exp_params['protocols']['Hans_sil1']['Magnetometry'])
pts_coarse = 31
fine_pts = 51
fine_range = 0.4e6
n_split = m.params['N_HF_frq']
mw_mod = m.params['MW_modulation_frequency']
outer_minus = np.linspace(mw_mod-1e6,mw_mod-fine_range,pts_coarse)
outer_plus = np.linspace(mw_mod+fine_range,mw_mod+1e6,pts_coarse) + 2*n_split
aplus_list = np.linspace(mw_mod-fine_range,mw_mod+fine_range,fine_pts) +2*n_split
a0_list = np.linspace(mw_mod-fine_range,mw_mod+fine_range,fine_pts) + n_split
amin_list = np.linspace(mw_mod-fine_range,mw_mod+fine_range,fine_pts)
amin_to_a0 = np.linspace(mw_mod+fine_range,mw_mod-fine_range+n_split,pts_coarse)
a0_to_aplus = np.linspace(mw_mod+fine_range+n_split,mw_mod-fine_range+2*n_split,pts_coarse)
# m.params['MW_pulse_mod_frqs'] = np.linspace(m.params['MW_modulation_frequency']
# -1.5e6, m.params['MW_modulation_frequency']+5.5e6, pts)
m.params['MW_pulse_mod_frqs'] = np.r_[outer_minus,amin_list,amin_to_a0,a0_list,a0_to_aplus,aplus_list,outer_plus]
print m.params['MW_pulse_mod_frqs']
pts = len(m.params['MW_pulse_mod_frqs'])
m.params['reps_per_ROsequence'] = 250
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 2500e-9
# MW pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 8e-6 #m.params['AWG_MBI_MW_pulse_duration']*4 #3e-6 #3000e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.006 #m.params['AWG_MBI_MW_pulse_amp']/4 #0.01525 #for msm1, ??? for msp1,
m.params['pts'] = pts
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse frequency (MHz)'
m.params['sweep_pts'] = (m.params['MW_pulse_mod_frqs'] + m.params['mw_frq'])/1.e6
print m.params['MBI_threshold']
funcs.finish(m, debug=False)
def RO_spin_flip_calibration(name, MBI_RO_power=None, MBI_RO_duration=None):
m = pulsar_mbi_espin.ElectronRabi(name)
funcs.prepare(m)
pts = 11
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 2000
#Spin pumping before Nitrogen MBI: Switch spin pumping towards ms=0
m.params['Ex_SP_amplitude'] = 0
m.params['A_SP_amplitude_before_MBI'] = 20e-9
m.params['SP_E_duration'] = 1000
#No MBI MW pulse
m.params['AWG_MBI_MW_pulse_amp'] = 0
#No repump in between
m.params['repump_after_MBI_A_amplitude'] = [0e-9]
#First RO (dynamical stop)
if MBI_RO_power != None:
m.params['Ex_MBI_amplitude'] = MBI_RO_power
if MBI_RO_duration != None:
m.params['MBI_duration'] = MBI_RO_duration
m.params['AWG_wait_for_adwin_MBI_duration'] = m.params[
'MBI_duration'] * 1e-6 + 15e-6 #1.2*m.params['MBI_duration']*1e-6# Added to AWG tirgger time to wait for ADWIN event. THT: this should just MBI_Duration + 10 us
#Do you want to condition on getting a click?
m.params['MBI_threshold'] = 1
# NO MW pulses
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 2000e-9
m.params['MW_pulse_durations'] = np.ones(pts) * 0
m.params['MW_pulse_amps'] = np.ones(pts) * 0
m.params['MW_pulse_mod_frqs'] = np.linspace(
m.params['MW_modulation_frequency'] - 1.5e6,
m.params['MW_modulation_frequency'] + 5.5e6, pts)
# for the autoanalysis
m.params['sweep_name'] = 'repetitions'
m.params['sweep_pts'] = range(pts)
funcs.finish(m, debug=False)
def cal_fast_pi2(name, mult=1, Range=0.05, mbi=True, mw_switch=False):
if mw_switch:
m = pulsar_mbi_espin.ElectronRabi_Switch('cal_fast_pi_over_2_' + name +
'_M=%d' % mult)
else:
m = pulsar_mbi_espin.ElectronRabi('cal_fast_pi_over_2_' + name +
'_M=%d' % mult)
#funcs.prepare(m, SIL_NAME)
funcs.prepare(m)
# measurement settings
pts = 21
m.params['reps_per_ROsequence'] = 500
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 30e-9
# pulses
m.params['MW_pulse_durations'] = m.params['fast_pi2_duration'] * (
np.ones(pts))
# print m.params['MW_pulse_durations']
m.params['MW_pulse_amps'] = np.linspace(
m.params['fast_pi2_amp'] - Range / 2.,
m.params['fast_pi2_amp'] + Range / 2., pts)
# print m.params['MW_pulse_amps']
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
if mbi == False:
m.params['MBI_threshold'] = 0
m.params['Ex_SP_amplitude'] = 0
m.params['Ex_MBI_amplitude'] = 0
m.params['repump_after_MBI_A_amplitude'] = [15e-9]
m.params['repump_after_MBI_duration'] = [50]
funcs.finish(m)
def cal_fast_pi2_length(name,
mult=1,
min_pulse_length=125e-9,
max_pulse_length=140e-9,
pulse_amp=0.4,
mbi=True):
m = pulsar_mbi_espin.ElectronRabi('cal_fast_pi_over_2_length' + name +
'_M=%d' % mult)
#funcs.prepare(m, SIL_NAME)
funcs.prepare(m)
# measurement settings
pts = 15
m.params['reps_per_ROsequence'] = 1000
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) * mult
m.params['MW_pulse_delays'] = np.ones(pts) * 30e-9
# pulses
m.params['MW_pulse_durations'] = np.linspace(
min_pulse_length, max_pulse_length, pts) * (np.ones(pts))
print m.params['MW_pulse_durations']
m.params['MW_pulse_amps'] = pulse_amp * np.ones(pts)
print m.params['MW_pulse_amps']
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
if mbi == False:
m.params['MBI_threshold'] = 0
m.params['Ex_SP_amplitude'] = 0
m.params['Ex_MBI_amplitude'] = 0
# for the autoanalysis
m.params['sweep_name'] = 'Pulse length (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m)
def run(name):
m = pulsar_mbi_espin.ElectronRabi(name)
funcs.prepare(m)
pts = 17
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 2000e-9
# MW pulses
m.params['MW_pulse_durations'] = np.linspace(0, 1500e-9, pts) + 5e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.166
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m, debug=True)
def cal_fast_rabi(name, yellow):
m = pulsar_mbi_espin.ElectronRabi('cal_4mhz_rabi'+name)
funcs.prepare(m, yellow)
pts = 21
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 20e-9
# MW pulses
m.params['MW_pulse_durations'] = np.linspace(0,250e-9,pts) + 5e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.75
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m)
def cal_slow_pi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_slow_pi_' + name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 500
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 1e-9
# slow pi pulses
m.params['MW_pulse_durations'] = np.ones(pts) * 2500e-9
m.params['MW_pulse_amps'] = np.linspace(0, 0.03, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amp (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_fast_rabi(name):
m = pulsar_mbi_espin.ElectronRabi('cal_fast_rabi' + name)
m.params.from_dict(qt.exp_params['protocols']['AdwinSSRO+MBI'])
funcs.prepare(m)
pts = 21
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 20e-9
# MW pulses
m.params['MW_pulse_durations'] = np.linspace(0, 500e-9, pts) + 5e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.4
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m, debug=False, upload=UPLOAD)
def cal_slow_pi(name, yellow):
m = pulsar_mbi_espin.ElectronRabi('cal_slow_pi_'+name)
funcs.prepare(m, yellow)
# measurement settings
pts = 21
m.params['reps_per_ROsequence'] = 500
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 1e-9
# slow pi pulses
m.params['MW_pulse_durations'] = np.linspace(0,5e-6,pts) + 50e-9
m.params['MW_pulse_amps'] = np.ones(pts) * 0.011
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
funcs.finish(m)
def cal_4mhz_pi2(name, mult=1):
m = pulsar_mbi_espin.ElectronRabi(
'cal_4MHz_pi_over_2_'+name+'_M=%d' % mult)
funcs.prepare(m)
# measurement settings
pts = 11
m.params['reps_per_ROsequence'] = 2000
m.params['pts'] = pts
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 100e-9
# pulses
m.params['MW_pulse_durations'] = 1e-9 * (np.ones(pts) * 45)
m.params['MW_pulse_amps'] = np.linspace(0.65, 0.75, pts)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * \
m.params['AWG_MBI_MW_pulse_mod_frq']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse amplitude (V)'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
funcs.finish(m)
def run(name, mw_switch=False):
if mw_switch:
m = pulsar_mbi_espin.ElectronRabi_Switch(name)
else:
m = pulsar_mbi_espin.ElectronRabi(name)
funcs.prepare(m)
# m.params.from_dict(qt.exp_params['protocols']['Hans_sil1']['Magnetometry'])
pts = 81
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 1000
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int)
m.params['MW_pulse_delays'] = np.ones(pts) * 1582e-9
# MW pulses
m.params['MW_pulse_durations'] = np.ones(
pts) * 8000e-9 #m.params['AWG_MBI_MW_pulse_duration'] #3e-6 #3000e-9
m.params['MW_pulse_amps'] = np.ones(
pts
) * 0.003 #m.params['AWG_MBI_MW_pulse_amp'] #0.01525 #for msm1, ??? for msp1,
m.params['MW_pulse_mod_frqs'] = np.linspace(
m.params['MW_modulation_frequency'] - 3.5e6,
m.params['MW_modulation_frequency'] + 3.5e6, pts)
print m.params['MW_pulse_mod_frqs']
# for the autoanalysis
m.params['sweep_name'] = 'MW pulse frequency (MHz)'
m.params['sweep_pts'] = (m.params['MW_pulse_mod_frqs'] +
m.params['mw_frq']) / 1.e6
# print 'MBI_Threshold', m.params['MBI_threshold']
funcs.finish(m, debug=False)
def run(name, mbi=True, mw_switch=False):
if mw_switch:
m = pulsar_mbi_espin.ElectronRabi_Switch(name)
else:
m = pulsar_mbi_espin.ElectronRabi(name)
funcs.prepare(m)
#m.params.from_dict(qt.exp_params['protocols'][SAMPLE]['Magnetometry'])
#print 'MBI threshold =' + str(m.params['MBI_threshold'])
#print 'Ex_MBI_amplitude =' + str(m.params['Ex_MBI_amplitude'])
#print 'SSRO_duration =' + str(m.params['SSRO_duration'])
pts = 21
m.params['pts'] = pts
m.params['reps_per_ROsequence'] = 250
sweep_duration = True
sweep_detuning = False
#Note: MBI init line is set in msmnt_params:AWG_MBI_MW_pulse_ssbmod_frq
# driving line (a.k.a. RO line)
m.params['MW_pulse_mod_frqs'] = np.ones(pts) * m.params[
'MW_modulation_frequency'] #-m.params['N_HF_frq']
#m.params['mw_frq'] = m.params['ms+1_cntr_frq']-m.params['MW_modulation_frequency']
m.params['MW_pulse_multiplicities'] = np.ones(pts).astype(int) #*5
m.params['MW_pulse_delays'] = np.ones(pts) * 200e-9
if sweep_duration:
# MW pulses
m.params['MW_pulse_amps'] = np.ones(pts) * m.params['fast_pi_amp']
m.params['MW_pulse_durations'] = np.linspace(
0, 4 * m.params['fast_pi_duration'],
pts) # 05-30-'14 Took away the +10 ns -Machiel
m.params['sweep_name'] = 'MW pulse duration (ns)'
m.params['sweep_pts'] = m.params['MW_pulse_durations'] * 1e9
if mbi == False:
m.params['MBI_threshold'] = 0
m.params['Ex_SP_amplitude'] = 0
m.params['Ex_MBI_amplitude'] = 0
m.params['repump_after_MBI_A_amplitude'] = [15e-9]
m.params['repump_after_MBI_duration'] = [50]
else:
# tau_larmor = 2.999e-6 #why?
m.params['MW_pulse_durations'] = np.ones(
pts) * m.params['fast_pi_duration']
m.params['MW_pulse_amps'] = np.linspace(0, 0.9, pts)
m.params['sweep_name'] = 'MW pulse amp'
m.params['sweep_pts'] = m.params['MW_pulse_amps']
if mbi == False:
m.params['MBI_threshold'] = 0
m.params['Ex_SP_amplitude'] = 0
m.params['Ex_MBI_amplitude'] = 0
m.params['repump_after_MBI_A_amplitude'] = [15e-9]
m.params['repump_after_MBI_duration'] = [50]
if sweep_detuning:
m.params['MW_pulse_amps'] = np.ones(
pts) * 0.022 #m.params['fast_pi_amp']
m.params['MW_pulse_durations'] = np.ones(
pts) * 2000e-9 # 05-30-'14 Took away the +10 ns -Machiel
fctr = m.params['MW_modulation_frequency']
m.params['MW_pulse_mod_frqs'] = np.linspace(fctr - 2250e3,
fctr + 2250e3, pts)
m.params['sweep_name'] = 'MW added detuning (KHz)'
m.params['sweep_pts'] = m.params['MW_pulse_mod_frqs'] * 1e-3
# for the autoanalysis
funcs.finish(m, debug=False)
